Its very easy to fit AdBlue Emulator to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator overrides AdBlue system electronics in such way that there will be no any power loss, any warnings on the dashboard or in diagnostic system.

This device works without interruption to work of another electronic systems on vehicle. AdBlue Emulator device has a multi-brand support so there is one version of emulator for all supported trucks, just load the necessary program to the emulator and you can install it on any supported truck.

AdBlue Emulator support list:

3099.00€ per unit

[hr]

man cats, man cats 2, man cats ii, man cats t200, man t200, t200, man diagnostic tool

MAN T200 is the latest original diagnostic tool from MAN that replaces old MAN CATS II diagnostic tool. MAN T200 designed for maintenance of trucks, buses and other heavy vehicles made by MAN, it supports older and new models of vehicles due to support of various diagnostic protocols. MAN T200 supports very wide range of MAN vehicles due to compatibility with older vehicle models and older diagnostic protocols and due to compatibility with vehicles equipped with CAN BUS diagnostic system. This tool works with original MAN diagnostic software MAN CATS II (version 11.01).

T200 helps you to maintain almost all MAN vehicles and engines at your workshop or outside anywhere on the road in case of emergency. Suitable for large MAN services and small workshops. T200 comes in kit with necessary cables, notebook PC and original MAN diagnostic software (installed on PC).

MAN T200 functions:

• Control unit identification Read out, evaluate and delete diagnostic memory Actuator test (active triggering of actuators);
• Monitoring (visualisation and evaluation of current sensor signals);
• General circuit diagrams of systems retrievable;
• And more…;

Volvo 88890020 is the latest Volvo diagnostic tool for Volvo trucks, buses and other heavy vehicles....

Volvo 88890020 or Volvo Interface is developed for Volvo and Mack heavy vehicles (trucks, buses) and egnines. Communication unit enables PC to vehicle communication, the device connects to the PC via USB cable or by WLAN using the 802.11 b/g connection standards. Before the 88890020 communication unit can be used, a driver must be installed on the PC. In addition, a utility application (Admin0020) can be used to check the status of the device and update the firmware if and when needed.

There are three different ways, described below, of connecting communication unit 88890020:

Via USB-cable

1. Connect the communication unit to the vehicle.
2. Connect the USB-cable between the communication unit and the PC.
3. Select communication unit 88890020 and USB-cable setting in window Alternative.

Directly to the communication unit

Note: Your PC must have Wireless LAN 802.11b/g and support for 128 bit WEP (encryption), if it is to be used for direct communication with the communication unit. The Panasonic CF29 has this built into the motherboard. Additional Wireless LAN cards will be recommended in the future.

1. Connect the communication unit to the vehicle.
2. Select communication unit 88890020 and Direct to communication unit in window Alternative.

Security level Directly to the communication unit

1. Communication is performed using 128 bit WEP, Wired Equivalent Privacy. The WEP-key is generated automatically and is not seen during the configuration.

Via an access point

Note: Contact the local IT-support or network technician before installation.

1. Connect the communication unit to the vehicle.
2. Select communication unit 88890020 and Via an access point in window Alternative.

Security level Via an access point

There are three alternatives for this:

WEP and MAC-address. Communication is performed using 128 bit WEP, Wired Equivalent Privacy. The WEP-key is written in during configuration. The MAC-address is to be written into the access point for additional security. WPA and PSK. Communication is performed via WPA, Wi-Fi Protected Access. 802.1x. Communication is performed using standard EAP_MSCHAP v2. The communication unit is then treated as a PC and will be logged on to the network using a username and password.

Product description for communication unit 88890020. Communication unit 88890020 has a number of different coloured LEDs. These LEDs show the status of the communication unit and indicate warnings, etc. Refer to the table below for an overview.

Iveco Eltrac with Iveco Easy software enables wireless Bluetooth connection between Iveco vehicle and diagnostic computer a...

Iveco Eltrac has a fast and very accurate error detection, identification and correction, that is what every Iveco workshop need every day. Iveco Eltrac Bluetooth module is heavy-duty ready. It is a reliable solution that currently is used almost all Iveco workshops and services. Iveco Eltrac with Iveco Easy is the only and best ever diagnostic solution for Iveco heavy vehicles.

Iveco Eltrac allows you to:

• Carry out Active Diagnosis by local checking the activation and the working of the components without the help of other operators.
• A better ergonomy during diagnosis operation without the hindrance and limitations of the cable.
• Check the parameters of the vehicle on-board systems.

IVECO (also Daewoo, TATA trucks, IRISBUS) diagnostic set includes:

• ECI diagnostic interface;
• 38 pin cable (Iveco 99331043 part number);
• 19 pin cable (Iveco 99368555 part number) – out of stock!;
• OBD2 cable (Iveco 99331057 part number);
• 99327017 – adapter cable for connection 38pin, 19pin and OBD2 cables to ECI;
• 99327037 – SELF-DIAGNOSIS CONNECTOR;
• 99327018 – USB cable for PC connection (short);
• 99327019 – USB cable for PC connection (long);
• DVD with EASY installation and manual , can install on any laptop.

Iveco Eltrac GUI languages:

Italian, Spanish, French, English, German, Czech, Danish, Hungarian, Dutch, Swedish, Finnish, Portuguese, Polish, Turkish, Croatian, Greek, Russian, Korean

2899.00€ per unit

[hr]

renault truck, renault truck diagnostic, truck diagnostic, renault diagnostic, 88840133

Renault truck diagnostic kit allows you to diagnose and program all LVC and all Renault trucks with DXi engines and without DXi. Renault truck diagnostic kit is a replacement tool of old Renault truck tool NG3 which is now unavailable due to discontinued production. Renault truck diagnostic kit is compatible with the latest software diagnostic equipment for Renault trucks.

Renault truck diagnostic kit include:

• 88840133 diagnostic interface;
• Compatible notebook;
• OBD2 diagnostic interface cable;
• BNA 12-pin diagnostic interface cable;
• USB cable for PC connection;

Renault truck diagnostic kit software:

• Renault Diag NG10 Diagnostica+ 1.05;
• Renault Diag NG10 LCV Diagnostic 1.75;
• Renault Diag NG10 Teach Me 1.05;
• Renault Diag NG10 Tech Tool (RTT) 1.12
• VCADS Pro 2.40 (Development)

799.00€ per unit

[hr]

scania vci, scania vci 2, vci 2, scania vci ii, vci ii, scania diagnostic tool, truck diagnostics, truck diagnostic tool

Scania VCI 2 diagnostic tool replaces older Scania VCI 1 tool and designed to work with latest Scania trucks, buses and other heavy vehicles. Scania VCI2 is a tool that is used together with Scania Diagnosis and Programmer 3 (SDP3) software to diagnose and troubleshoot Scania heavy vehicles and trucks. Best tool for your Scania truck workshop, also it is the only diagnostic tool on the market compatible with latest Scania trucks.

Scania VCI 2 features:

• Name and version of the vehicle system.
• Stored fault codes, proposals for remedial action and delete option.
• Control unit configuration and settings.
• Information about electrical components and their location.
• Input and output signals.
• Activation of components.
• Spare part programming.
• Circuit diagrams. For each circuit there is a diagram which clearly shows how the particular circuit is implemented in the respective vehicle.
• Chassis data. The vehicle gives the program a description of itself and how it is configured.
• User functions. In order to meet service market requirements to work more effectively, there is an option to troubleshoot via user functions, e.g. cruise control.
• Use of the program requires a PC, a USB key and a VCI2. These components must comply with the applicable system requirements, so that the program will operate correctly.

After connecting VCI2 to the PC and starting SDP3, you can access information about VCI2 by opening the menu under View. This works regardless of whether VCI2 is connected to the vehicle or not.

Scania VCI 2 languages: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian.

VCI2 supports the earlier systems in P, R, T series and K, N series vehicles and industrial and marine engines.

349.00€ per unit

[hr]

sdp3, scania sdp3, scania sdp3 update, scania diagnostic software, scania programming software, scania programming, scania diagnostics

Scania SDP3 update 2.10.1 is the latest update for Scania diagnostic tool VCI2 software. SDP3 (Scania Diagnos & Programmer) software is a OEM software designed to maintain Scania trucks and other heavy vehicles over VCI diagnostic interface. We offering this update for a very reasonable price. This update contains software installation and USB dongle key (with Industry & Marine Level activation) to activate software every time you launch the SDP3. This software works only with Scania VCI interfaces so if you need one you can purchase this tool here -> Scania VCI2

Scania SDP3 features:

• Scania SDP3 software is used to maintain Scania trucks and other heavy vehicles (Scania R,P,G,T,K,N series) made since 2004 year.
• Scania Scania Diagnos & Programmer 3 available in these languages: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese.
• Full compatibility with Scania VCI2 diagnostic interface.
• Compatible with Microsoft Windows OS (XP, Vista, Windows 7).

Scania SOPS File Encryptor/Decryptor v0.1 (optional):

We offer Scania SOPS File Encryptor/Decryptor v0.1 as optional accessory to Scania SDP3 update. Scania SOPS File Encryptor/Decryptor v0.1 features:

• Download with SDP3 from truck SOPS export file;
• Decrypt SOPS export file to XML format;
• Edit XML file with any XML editor;
• Modify more than 300 parameters, like AdBlue, EGR, NOx Control, see whole list;
• Encrypt XML file to SOPS import;
• Upload SOPS import file to truck with SDP3;
• Support Microsoft Windows 2003/XP/Vista/Windows 7.

Construction Vehicle Interface (CVI) is a diagnostic device that enables workshop personnel to retrieve vehicle information ...

Construction Vehicle Interface (CVI) connects with your PC, and alows you to use specific PC applications to perform vehicle diagnostics. Construction Vehicle Interface (CVI) supports a wide range of RP1210A compliant diagnostic PC applications. Below there is a list of the RP1210A-compliant applications with which the Construction Vehicle Interface (CVI) has been qualified:

• Caterpillar Electronic Technician
• Cummins Insite
• Detroit Diesel Diagnostic Link (DDDL);
• Detroit Diesel DDEC Reports;
• International 3BX Master Diagnostics (MD32);
• International DLC Master Diagnostics (MD32);
• International DLC II Master Diagnostics (MD32);
• Allison DOC;
• Eaton ServiceRanger;
• Bendix ACom;
• Meritor WABCO Toolbox;
• FreightLiner ServiceLink.

Construction Vehicle Interface protocols:

J1708/J1587, J1939, CAN (125K, 250K, or 500K) (Dual CAN supported), J2284 CAN (125K, 250K, or 500K), ALDL Pass-through, ALDL 8192, ALDL 9600, OBDII, ISO 9141, ISO 14230 (KWP2000), J1850 (PWM, VPM, or Allison), J1708, IESCAN (required for Allison).

Construction Vehicle Interface kit:

• Construction Vehicle Interface device (CVI)
• Adapter 10-99-0004
• Adapter cable 404009
• Adapter cable 405048
• Adapter cable 443013
• Adapter cable 506103
• USB Cable

CARPROG was designed by demands of customers which want to have universal tool for car radios, odometers, dashboards, immobil...

CARPROG was designed by demands of customers which want to have universal tool for car radios, odometers, dashboards, immobilizers repair with advanced functions like EEPROM and microcontroller programmer, key transponder programmer and other.

• Universal Tool – CARPROG has powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer, future possibility’s to make on the same hardware Microcontroller programmer, Immobiliser Transponder Key programmer with antenna adapter for 125/134 kHz, K-line diagnostic (dashboard odometer programming, immobilizer key programming), CAN line diagnostic, +5V/+12V  output, USB, power supply only from USB.
• Low Cost tool – with CARPROG basic you will receive many extra functions (like vehicle radio code calculator CC1, EEPROM programmer and VAG dashboard’s CAN programmer ) and all additional software you can buy extra according your needs.
• Hacker Safe tool – each CARPROG have individual serial number and for software activation it uses internet based server connection. Inside CARPROG there is a advanced crypto security system to prevent tool from cloning. Be sure that your investments in to CARPROG device will be safe.
• Easy Update by Internet System – you can buy any update Online on and in one day you will be able to use it with your CARPROG tool.
• User Friendly – Microsoft Windows XP software, works without any installations,  on all PC, use USB to link with your PC, all adapters schematics and diagrams are on-line;

With CARPROG FULL tool you will receive all Software’s and Adapters that will be available for sale at the moment of purchase.