“Lynn, One of the wires running from the reactor to the spindle was loose at the reactor.  When I pulled on it, it popped out of the terminating strip.  Thank you very much for your info.  We are up and running thanks to you!!!”

Thanks,
Brian Dahn
Donaldson, Monticello Plan

“Thanks for the wonderful service we have received throughout this 2011 year.
We look forward to our associate in 2012.”

-Christine Van Der Hulst
Proform Plastics Limited

Click on the Model Type below for more technical information about these Patriot Routers.

4×2 CNC Router

4×4 CNC Router

4×8 CNC Router

Contact CNC Parts Dept at (858) 922-4967 for more information about these Patriot 3 axis CNC Router made by Freedom Machine Tool, or send us a quote request by filling out the form below.

• 10ft. x 5ft. table
• 36″ of stroke
• HSD ES919 Spindle Motor
• Fagor 8050 w/ 8055 upgrade
• Alpha Gear driven 5^th axis
• Misting system
• Inverted cylinder for low ceiling clearance

Located: Florida

For more information about this Motion Master 5 Axis CNC Router for sale (Reference #C244), contact our office at (858) 922-4967, or fill out the form below and we will contact you promptly.
[contact-form-7]

• 8 ft. x 5 ft. table
• 7 in. of stroke
• (4) 12 hp Komo spindle motors
• (4) Leeson C42T drills
• Fanuc O-M CNC Controller
• Fanuc AC Servo C series drives

Location: Southern California

For more information about this Komo 3 Axis CNC router for sale (Reference #C239), contact our office at (858) 922-4967, or fill out the form below and we will contact you promptly.
[contact-form-7]

Base Machine Configuration:

• 3-Axis, moving gantry design with a 4 foot x 8 foot work area.
• Welded steel tube, angle and plate frameworks, precision machined, drilled and tapped for a 4ft. x 8ft. table.
• Z-Axis tool plate with a 7 inch, servo driven, vertical stroke.
• FAGOR 8035 Industrial CNC control with color CRT, 256K memory, 128 MB flash-disk program storage, USB port for memory stick program transfer, M&G code programming, tool path graphics, and feed-rate and spindle speed override.
• 25mm precision, profiled rails with recirculating bearing blocks on all axes.
• Precision ball-screws with anti-backlash ball-nuts on all axes (25mm on X & Y, 20mm on Z).
• Industrial quality brush-less AC servo motors and matching servo amplifiers on all axes.
• BobCad V 23 Cad/Cam software and post processor.
• 220v, 3-phase, 60 hz power. 30 amps required.

Precision Ball Screws with Anti-backlash Ball Nuts

FAGOR digital AC servo motor and amplifier

FAGOR 8035 Industrial CNC control

Spindle Options:

HSD 11HP Spindle

• 5 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 9 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 5 HP HSD 915, continuous duty,push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM. Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• 11 HP HSD 919, continuous duty, push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM. Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• All spindle options are electric fan cooled for quiet operation.

Table Options:

• 4′ x 8′ Phenolic table top machined flat
• 4′ x 8′ Phenolic table top machined flat with 3/8″ steel helicoil inserts on 12″ centers
• 4′ x 8′ aluminum T-slot table
• 4′ x 8′, 2-Zone, phenolic vacuum plenum with manual controls
• 4′ x 8′, 4-Zone, phenolic vacuum plenum with manual controls

Optional Accessories:

• 6-Position tool rack for fully automatic tool change capabilities.
• Automatic tool height sensor. Uses the 6th position on the tool rack. The fully automatic tool change machine becomes 5-position.
• Dust hood for point-of-generation chip collection. 4” port requires a 1,200 cfm dust collector hook-up. Dust collector not included.
• Hand-held teach pendant on umbilical cord with axis select and jog hand-wheel.
• Ethernet card with standard TCP/IP protocol for easy connection to your network.
• M04 counter clockwise spindle rotation for use with left handed tools and to overcome blow-out problems when machining hard-woods.
• Unist “Uni-Max” coolant system with M-code programmable on/off control, and single or multiple nozzles for cutting non-ferrous metals requiring lubrication. Dust hood must be removed while using this system.
• 1” bridge spacers installed to increase bridge clearance to 9”.
• 2” bridge spacers installed to increase bridge clearance to 10”.
• 3” bridge spacers installed to increase bridge clearance to 11”.

Vacuum Pumps:

• Travaini EVO-5, 5 HP, 70 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 20 amps required. Great for sealed fixture applications.
• Travaini EVO-10, 10 HP, 145 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 30 amps required. Great for sealed fixture and porous-plenum applications.

For more information, call our office at (858) 922-4967, or fill out the form below and we will contact you promptly.

[contact-form-7]

Base Machine Configuration:

• 3-Axis, moving gantry design with a 4 foot x 4 foot work area.
• Welded steel tube, angle and plate frameworks, precision machined, drilled and tapped for  a 4ft. x 4ft. table.
• Z-Axis tool plate with a 7 inch, servo driven, vertical stroke.
• FAGOR 8035 Industrial CNC control with color CRT, 256K memory, 128 MB flash-disk program storage, USB port for memory stick program transfer, M&G code programming, tool path graphics, and feed-rate and spindle speed override.
• 25mm precision, profiled rails with recirculating bearing blocks on all axes.
• Precision ball-screws with anti-backlash ball-nuts on all axes (25mm on X & Y, 20mm on Z).
• Industrial quality brush-less AC servo motors and matching servo amplifiers on all axes.
• BobCad V 23 Cad/Cam software and post processor.
• 220v, 3-phase, 60 hz power. 30 amps required.

Precision Ball Screws with Anti-backlash Ball Nuts

FAGOR digital AC servo motor and amplifier

FAGOR 8035 Industrial CNC control

Spindle Options:

HSD 11HP Spindle

• 5 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 9 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 5 HP HSD 915, continuous duty,push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM.  Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• 11 HP HSD 919, continuous duty, push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM.  Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• All spindle options are electric fan cooled for quiet operation.

Table Options:

• 4′ x 4′ Phenolic table top machined flat.
• 4′ x 4′ Phenolic table top machined flat with 3/8″ steel helicoil inserts on 12″ centers.
• 4′ x 4′ aluminum T-slot table.
• 4′ x 4′, 2-Zone, phenolic vacuum plenum with manual controls.

Optional Accessories:

• 6-Position tool rack for fully automatic tool change capabilities.
• Automatic tool height sensor. Uses the 6th position on the tool rack. The fully automatic tool change machine becomes 5-position.
• Dust hood for point-of-generation chip collection. 4” port requires a 1,200 cfm dust collector hook-up. Dust collector not included.
• Hand-held teach pendant on umbilical cord with axis select and jog hand-wheel.
• Ethernet card with standard TCP/IP protocol for easy connection to your network.
• M04 counter clockwise spindle rotation for use with left handed tools and to overcome blow-out problems when machining hard-woods.
• Unist “Uni-Max” coolant system with M-code programmable on/off control, and single or multiple nozzles for cutting non-ferrous metals requiring lubrication. Dust hood must be removed while using this system.
• 1” bridge spacers installed to increase bridge clearance to 9”.
• 2” bridge spacers installed to increase bridge clearance to 10”.
• 3” bridge spacers installed to increase bridge clearance to 11”.

Vacuum Pumps:

• Travaini EVO-5, 5 HP, 70 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 20 amps required. Great for sealed fixture applications.
• Travaini EVO-10, 10 HP, 145 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 30 amps required. Great for sealed fixture and porous-plenum applications.

For more information, call our office at (858) 922-4967, or fill out the form below and we will contact you promptly.

[contact-form-7]

Base Machine Configuration:

• 3-Axis, moving gantry design with a 4 foot x 2 foot work area.
• Welded steel tube, angle and plate framework, precision machined, drilled and tapped to accept a 4ft. x 2ft. table option.
• Z-Axis tool plate with a 7 inch, servo driven, vertical stroke.
• FAGOR 8035 Industrial CNC control with color CRT, 256K memory, 128 MB flash-disk program storage, USB port for memory stick program transfer, M&G code programming, tool path graphics, and feed-rate and spindle speed override.
• 25mm precision, profiled rails with recirculating bearing blocks on all axes.
• Precision ball-screws with anti-backlash ball-nuts on all axes (25mm on X & Y, 20mm on Z).
• Industrial quality brush-less AC servo motors and matching servo amplifiers on all axes.
• BobCad V 23 Cad/Cam software and post processor.
• 220v, 3-phase, 60 hz power. 30 amps required.

Spindle Options:

• 5 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 9 HP HSD wrench type routing spindle, programmable from 2,000 – 18,000 RPM. Includes spindle wrenches, 1-ER 32 collet, and cover-nut.
• 5 HP HSD 915, continuous duty,push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM.  Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• 11 HP HSD 919, continuous duty, push-button/quick-change/ATC routing spindle, programmable from 2,000 – 24,000 RPM.  Includes 1 – ISO 30 tool holder with collet and cover-nut, and spindle wrenches.
• All spindle options are electric fan cooled for quiet operation.

Table Options:

• 4′ x 2′ Phenolic table top machined flat.
• 4′ x 2′ Phenolic table top machined flat with 3/8″ steel helicoil inserts on 12″ centers.
• 4′ x 2′ aluminum T-slot table.
• 4′ x 2′, 2-Zone, phenolic vacuum plenum with manual controls.

Optional Accessories:

• 6-Position tool rack for fully automatic tool change capabilities.
• Automatic tool height sensor. Uses the 6th position on the tool rack. The fully automatic tool change machine becomes 5-position.
• Dust hood for point-of-generation chip collection. 4” port requires a 1,200 cfm dust collector hook-up. Dust collector not included.
• Hand-held teach pendant on umbilical cord with axis select and jog hand-wheel.
• Ethernet card with standard TCP/IP protocol for easy connection to your network.
• M04 counter clockwise spindle rotation for use with left handed tools and to overcome blow-out problems when machining hard-woods.
• Unist “Uni-Max” coolant system with M-code programmable on/off control, and single or multiple nozzles for cutting non-ferrous metals requiring lubrication. Dust hood must be removed while using this system.
• 1” bridge spacers installed to increase bridge clearance to 9”.
• 2” bridge spacers installed to increase bridge clearance to 10”.
• 3” bridge spacers installed to increase bridge clearance to 11”.

Vacuum Pumps:

• Travaini EVO-5, 5 HP, 70 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 20 amps required. Great for sealed fixture applications.
• Travaini EVO-10, 10 HP, 145 ACFM oil ring type vacuum pump. 230v, 3-phase, 60 hz. 30 amps required. Great for sealed fixture and porous-plenum applications.

For more information, call our office at (858) 922-4967, or fill out the form below and we will contact you promptly.

[contact-form-7]