The one small hack was placing a sed command inside the gcc 4.5 ebuild. It will build the first time without the command, but all subsequent builds will fail with an error that stage 2 and stage 3 are different. Here’s the line added to the src_unpack part of the ebuild: (Note: wrapping added)

[[ ${CFLAGS} == *-march=atom* ]] && sed -i
    -e 's/(INSN_P/(NONDEBUG_INSN_P/g'
    -e 's/!INSN_P/!NONDEBUG_INSN_P/g'
    gcc/config/i386/i386.c

To keep it safe, the line check if you $CFLAGS has -march=atom in it. If so, then it runs the following sed command. Originally issued as a patch for gcc for all of us running an Atom processor(s), I swapped it around to a sed command, as a few forum posts pointed out.

Beyond making the ‘overlay ebuild’, there was only 1 other snag, and that was binutils. Using the new gcc, binutils just wouldn’t compile. The error was about the movbe instruction. Upgrading from 2.18 to 2.19 using the old gcc compiler did the trick. After that it was just a matter of waiting for all the packages to recompile.

If anyone is thinking about upgrading to gcc 4.5 on gentoo, it’s not all that bad. Make sure to read the Gentoo GCC Upgrading Guide before you do anything. Also, run a “cat /proc/cpuinfo” to get the model of atom processor and make sure your CFLAGS are set properly.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

1. Drag a program from the start menu to the desktop.
   This is great if you use something all the time, but the program did not install a desktop icon. Note: Putting freecell on your desktop may be hazardous to your productivity.
2. Drag a folder/file/program to the start menu.
   You can´t just drop it anywhere on the start menu, as parts of it were written in stone.
3. Drag a tab in Firefox to the Bookmark menu.
   This makes bookmarks super easy. You can even drag the tab to the bookmark toolbar.

Pointer Clues

When you drag and drop, your mouse pointer will change. If you are not allowed to drop something somewhere, you will have a no sign (like no smoking). If you are allowed to drop something there, you will have a normal pointer with a dashed box. Usually, a black line will show where the item will drop.

Right-Click Drag and Drop

If you use the right mouse button instead of the left, when you drop the item you will see a little menu. This will ask if you want to copy, move, create a shortcut, or cancel. Most of the time, Windows will move the item. Sometimes a copy is made. If you right-drag it, you can decide.

Middle-Click

Sadly, the scroll wheel, sometimes called the middle button, does not drag and drop. It does have some pretty cool uses though, including opening a link in a new tab.

One Final Clickity Note

Always use the left mouse button, unless told specifically to use another button.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

The retail version of this game comes with access to downloadable content. While this additional content can be purchased for $15 if the game comes second hand, that doesn’t help those that download the game illegally. The retail PC version can be found for at little as $43.

My theory is simple: This game was leaked by BioWare. They want to see how many people buy the game vs how many download it, when buying the game comes with extra content. The leak is just like an old school demo; the ones where you got the whole game, but just one level.

The business model makes perfect sense. The more people that download via BitTorrent, the more money saved from manufacturing. On top of that, removing retailers from the financial pyramid makes products cheaper for the consumer and more revenue directly to the producer.

Could we be returning to these earlier days? Could this be the future? Game makers releasing a low content version via BitTorrent and charging for additional content?

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

I’ve got another cheat for all you cafe world fans.

If you turn your stove toward a wall or table or another stove, you will not have to walk to the stove. Ever. In fact, the only place your character will walk to is a serving table.

Bonus Tip

Max your buzz rating to 105.0 by making sure no customer leaves without food. Following my original Cafe World post, will almost ensure this.

Once your employees are boxed in, if anyone leaves without food, (re)move the table/chair where that person was sitting.

Related posts:

1. Cafe World Cheat UPDATE 3/18/2010: I have created some tools to help at...
2. ffmpeg Cheat Sheet ffmpeg is a video encoder for linux. This tool is...
3. Mencoder Cheat Sheet Mencoder is a video encoder for linux. It is part...

Related posts brought to you by Yet Another Related Posts Plugin.

UPDATE 2/6/2010: Cafe World upgraded their game this past week. Instead of a plant, you must use a chair or  table now to block your employees.

Recently, I’ve been playing Cafe World on Facebook. It’s one of those games that you play in spurts, cooking food. It’s quite addicting, and leveling goes fairly quick. I’ve figured out an easy cheat that anyone can do.

You can block your employees behind serving counters and they don’t have to walk to the tables. They pick up the food and it magically appears on the table. Also, the employee will “clean” the counter directly in front of them, leaving all servings there and a plate in the dining room disappears.

There is a trick to doing this. You have to block them in with a small object. I use a plant:

The plant was even a gift from a neighbor. This is super simple and can help raise your buzz rating.

Related posts:

1. Cafe World Cheat #2 UPDATE 3/18/2010: I have created some tools to help at...
2. ffmpeg Cheat Sheet ffmpeg is a video encoder for linux. This tool is...
3. Mencoder Cheat Sheet Mencoder is a video encoder for linux. It is part...

Related posts brought to you by Yet Another Related Posts Plugin.

I changed the timezone for the mysql session of the web app. It’s quite simple. The app uses good programming practices, so there’s only 1 place that I had to modify: immediately after the database connect & select db. These two lines now run as well:

mysql_query( 'SET time_zone = \'-8:00\'' );
date_default_timezone_set( 'America/Los_Angeles' );

My timezone is -5:00 (EST), so I set the timezone to -8:00 (PST). That gives me until 3AM local time to complete the tasks. If only there was a way to set the timezone of a particular database or user.

Related posts:

1. 10 Step to Becoming a Worse Programmer Code without thinking. Believe the first answer you get....

Related posts brought to you by Yet Another Related Posts Plugin.

I’m currently watching the news on WJBF, the only channel I get b/c I haven’t fully setup my antenna. Using xvmc is fairly simple:

mplayer -vc ffmpegmc12 -vo xvmc -framedrop dvb://WJBF-DT

I add -framedrop to keep the video and audio sync’ed.  Mplayer will rant about waiting for retrace. Using OpenGL is actually better, for me at least.

mplayer -vo gl2 -framedrop dvb://WJBF-DT

It dropped 14 frames at the beginning, but hasn’t dropped another in 10 minutes. XvMC would have crapped out by now. A/V sync is still perfect. I’ve even got it full screen and it’s resizing from 1280×720 (720 HD resolution) to 1440×900.

Related posts:

1. Mencoder Cheat Sheet Mencoder is a video encoder for linux. It is part...
2. X11 Forwarding A few days, I moved my desktop computer out into...
3. PVR Update In anticipation of TV shows coming back on, I’ve been...

Related posts brought to you by Yet Another Related Posts Plugin.

Today, I discovered a new trick … SSH X11 Forwarding. Now, I can play video on my desktop right from my netbook. It’s wonderful and very simple!

In the following instructions, the “A” refers to the computer playing the video and “B” refers to any other computer.

1. Make sure “X11Forwarding Yes” is in your sshd_config file on computer A. Restart sshd if you had to uncomment/add it.
2. On B, run `ssh -XC A`
3. In the ssh session, type `DISPLAY=:0.0`.
4. Now run mplayer or any other video player in the  ssh session and it will play on computer A.

If you want  to have a program run on computer A and use the screen on computer B, the process is very similar:

1. Make sure “X11Forwarding Yes” is in your sshd_config file on computer A. Restart sshd if you had to uncomment/add it.
2. On B, run `xhost A`
3. On B, run `ssh -XC A`
4. Now run mplayer or any other video player in the  ssh session and it will play on computer A.

Step 2 authorizes use of the current display by computer A and only needs to be run once. Also, note that the display variable doesn’t need to be set when using B’s screen.

Mplayer works wonderfully when playing on my desktop, plus I control it via the ssh session. It has tons of keyboard shortcuts. The ones I use the most are space for pause and the arrow keys for skipping around.

Related posts:

1. HDTV using MPlayer In my desktop computer, I’ve got an nvidia GeForce 6150...
2. Mencoder Cheat Sheet Mencoder is a video encoder for linux. It is part...
3. PVR Update In anticipation of TV shows coming back on, I’ve been...

Related posts brought to you by Yet Another Related Posts Plugin.

/usr/bin/mencoder dvb://$1 -ovc copy -oac copy -o "$2.mpeg" -endpos $3

All this does is copy the video and audio streams directly to the disk. The three parameters are  the station name, as stated in ~/.mplayer/channels.conf, the filename and the end position. This end position can be the number or seconds to record, or a time format of hh:mm:ss. This makes recording fairly simple within the cron.

The encode.sh script contains:

/usr/bin/mencoder -vf scale=640:-2 -ovc xvid -xvidencopts bitrate=1700:threads=2 \
 -oac copy "$1" -o "$1.avi"

This, slightly more complex use of mencoder, will scale the video to 640 wide, the height calculated to keep the aspect ratio. The video is encoded into xvid at 1700kbps using 2 threads. To speed up the encoding process, the audio is not re-encoded, but copied as is.

You will need to play with the number of xvid threads to find the best fps. I have a dual-core and it encodes the fastest with 2 threads. It does need to be an integer, and most dual-cores will work best at 2.

Then, two lines are required in the cron to record and encode the program:

59 19 * * 1 /dvr/record.sh WAGTNBC /dvr/shows/heroes 01:03:00
05 20 * * 1 /dvr/encode.sh /dvr/shows/heroes.mpeg

Related posts:

1. Mencoder Cheat Sheet Mencoder is a video encoder for linux. It is part...
2. PVR Cron For about a year now, I’ve been playing around with...
3. ffmpeg Cheat Sheet ffmpeg is a video encoder for linux. This tool is...

Related posts brought to you by Yet Another Related Posts Plugin.

As with any linux tool, there a tons of bells and whistles. This makes the learning curve kind of steep, but with a bit of determination anyone can make sense of it. Without further ado, here’s the cheat sheet:

Related posts:

1. Mencoder Cheat Sheet Mencoder is a video encoder for linux. It is part...
2. PVR Update In anticipation of TV shows coming back on, I’ve been...
3. PVR Cron For about a year now, I’ve been playing around with...

Related posts brought to you by Yet Another Related Posts Plugin.