COMPUTERS & INTERNET

How to Set Up Internet Sharing in Windows Vista Without a Router

noreply@blogger.com (the.denzo) — Tue, 15 Mar 2011 02:56:00 +0000

Internet Sharing Vista

In windows vista it is relatively easy to set up a shared Internet connection without a router and two computers. You only need a few basic things. First thing being an active Internet connection either dial up or broadband (cable, dsl or satellite).

The computer that connects to the Internet will be the server or slave computer meaning for other computers to connect you using this computer it must remain on or be turned on when needed. This computer should be fairly speedy as in processor capabilities and have good size memory installed to keep it from lagging under processes. A computer from 1.8ghz with 1.5 gigs of memory and above should be sufficient for this task.

For a wired connection with dial up you will need a 56k modem for Internet access and a Ethernet jack in the back of the computer. On your computer click start, control panel, network and Internet, network sharing center and then manage network connections. Right click on your dial up connection and select properties and then click the tab sharing. check allow other net work users to connect through this computers Internet connection. In the drop down under it select your Ethernet card usually local "Internet connection" and then click settings tab. Make sure all boxes are checked under the setting tab and click OK.

Next all you need to do is plug your server/slave computer into the computer that will be sharing the connection in together by a crossover Ethernet cable. A crossover cable is a special cable locally available designed for PC sharing. A normal Ethernet cable will not work for this task. A crossover cable is usually yellow and says crossover on the wire casing. Reboot both machines and connect the server to the net by dial up and your in business.

For a wireless connection between the two machines the set up is very simular but with a few different steps. For this you will need a dial up or broadband connection on the server/slave computer along with a wireless Ethernet card installed in a PCI or USB slot. Keep in mind the computer that will be sharing the connection will have to have a wireless Ethernet card installed to or built in such as a laptop.

Assuming everything is set and installed you need to do these steps. Click start, control panel, network and Internet, network sharing center and then manage network connections. If it is a dial up connection the set up is the same as above.

Right click on your dial up connection and select properties and then click the tab sharing. check allow other net work users to connect through this computers Internet connection. In the drop down under it select your wireless Ethernet card usually "Wireless Network Connection" and then click settings tab. Make sure all boxes are checked under the setting tab and click OK.

Now go to network and sharing screen again and select set up connection or network and select set up wireless or hoc (computer-to-computer) network. Select a network name you can name it virtually anything the most common is "home". Next select the security type Open means you wont need a password on the computer sharing the connection or WAP Personal will require a security key you make to keep unwanted people in range from using your connection. Next click save network and close to finish this set up. To make the network function you simply have to dial up like you would for the server/slave computer then on the bottom right corner of the screen next to the volume tab click connect to and right click connect to a network and select the name of the network you made earlier such as home. Once selected it should stay connected waiting for users to connect. take the second computer and search for a local WIFI connection and it should find "home" click connect and your online.

Connecting a broadband connection to a wireless card is fairly simple as you need to open the network and sharing screen once again. right click on your wireless card and click on the sharing tab and check all boxes andclose. While holding down the control key click once one the wireless card and once on the local Internet connection so both are highlighted and then right click and select bridge connections. Once the bridge has been made All you have to do is set up a wireless or hoc (computer-to-computer) network. go to network and sharing screen again and select set up connection or network and select set up wireless or hoc (computer-to-computer) network. To do this select a network name you can name it virtually anything the most common is "home". Next select the security type Open means you wont need a password on the computer sharing the connection or WAP Personal will require a security key you make to keep unwanted people in range from using your connection. Next click save network and close to finish this set up.
To make the network function you simply have to take the second computer and search for a local WIFI connection and it should find "home" click connect and your online.

Internet and the Computer - Good and Bad

noreply@blogger.com (the.denzo) — Sun, 13 Mar 2011 17:31:00 +0000

Internet for Computer

Overall, across the country computers are becoming much more a part of everyone's life. When I went to college you went to school and then had to go to a computer lab to do your homework. Several families had a computer in their home, but having the internet on any computer was not as common. Then of course, having a laptop was absolutely unheard of. Times have changed and now the internet and computers are available everywhere you turn. Most college students have their own laptop and can sit and work on their work or access their class information while sitting in class.
For many of us we love having this type of access. We love that we can access the internet from our phones or from anywhere we go. There are a million reasons to think that the computers, internet and access to the world at our fingertips is an amazing thing. It seems that with all great things there can be negatives. Child pornography has become much more prevalent due to the access to the internet. Whether you live in Los Angeles or live in Philadelphia it is important to recognize the importance of protecting your own children and those around you. Not only is it important to protect your own children, but if you come across anything on the internet it is important to report it.
You might not know where to turn for help if you find child pornography but it is important to look to lawyers that are specialized in the area that you live. If you live in Philadelphia you will want to get a Philadelphia child pornography lawyer. They are aware of the laws in your state and can help you make a difference.

Marc Neff Attorney-at-Law (http://www.nefflawoffices.com/) limits its practice to federal and state criminal defense and related matters, including grand jury investigations, parole matters, and forfeiture cases. Ryan Coisson is a freelance writer.

Article Source: http://EzineArticles.com/?expert=Ryan_Coisson

How to Become a Computer Dealer

noreply@blogger.com (the.denzo) — Thu, 10 Mar 2011 06:32:00 +0000

wholesale computer hardware

Do you want to learn how to become a computer dealer in the small business space?
If so, you should understand an important reality -- most technology professionals that start small companies of their own don't survive when they label themselves as "computer dealers."
Why not? First of all, when you're selling a commodity - in this case, a computer - you're going to attract clients that are looking for "low, low prices," and not anything particularly unique in the way of services.
You'll run into some serious problems no matter what you do when you're focusing on just a product sale. If you don't offer "low, low prices, you'll be priced out by competitors that do and make no sales. If you do offer prices that are low enough to attract the attention of small business owners, you'll run yourself right out of business. Because as a small dealer (or any dealer), you're already facing very low profit margins on computers in the small business space. And when your prices are barely above what it costs you to get the computers in the first place, you'd have to sell a whole lot of computers to come out ahead ... probably more than you as a one- or two-person operation could possibly sell.
What's the answer to learning how to become a computer dealer successfully? First, you need to focus on services that will add value to your overall offering. These services will include comprehensive small business solutions and on-going maintenance for your client's technology assets, a business model supported by on-going service agreements that provide tangible benefits to your small business clients and on-going revenue. Go way beyond the product sale and offer something that will set you apart from other commodities brokers and show that you really are unique in what you do.
The following 3 tips can help you learn how to be a computer dealer profitably in the small business arena.

Build Real Relationships. Developing a bond and a real relationship with your clients is critical to having a successful computer business. Your relationships are your assets. Success is not about the size of your customer list or about the revenue you get. It's about the longevity and the long-term relationships you build with your customers. Your best clients could bring you a lifetime value well in the six-figure net profit range, so really getting to know small business owners is worth your time and will pay off in the long run. Remember, the relationship isn't just about selling a box. Not even close.
Manage Customer and Client Expectations. If you are running a small computer business, you'll probably be handling sales initially, so you won't have to worry that the salesperson talking to your clients will change, causing you to have to start all over again. When you avoid impersonal sales tactics and build personal relationships with your customers, you can much better manage the expectations of your potential long-term clients from the very beginning of the sales process. You won't have to worry that a slick, hyper-aggressive impersonal salesperson is going to try to make a quick sale by misrepresenting the actual capabilities of your company.
Personally Train Your Sales Staff. As you learn how to become a computer dealer offering real value-added services to small businesses and not just products, you have to watch how you grow your business with well-trained staff. When your business gets some long-term clients and you find you need to hire additional staff members to help manage the sales side, make sure you train them properly so they are learning the tactics consistent with your best practices and ethics, so they represent your company well.

In this brief article, we talked about some critical ways to go beyond selling products and add real value with small business solutions for your clients. Find out more about how to become a computer dealer and attract steady, high-paying clients now at http://www.BecomeAComputerDealer.com
Copyright (C) BecomeAComputerDealer.com All Rights Reserved

Article Source: http://EzineArticles.com/?expert=Joshua_Feinberg

PODNUTZ TECH PODCAST NETWORK

noreply@blogger.com (the.denzo) — Tue, 08 Feb 2011 12:46:00 +0000

OFFICIAL LAPTOP REPAIP VIDEOS

Do you want to learn how to fix laptops?
Are you afraid to work on laptops for fear of breaking them?
Do you want to expand your skill set so you can make big money fixing laptops instead of sending the business away?
Receive the same high level of Podnutz quality, as Steve releases the long awaited Laptop Repair Video Collection!

What do you get in this package? You'll see in full 960x540 HD video:

How to replace a motherboard
How to replace an LCD Screen
What to do when the laptop keeps shutting down
How to fix DC power jacks
The crucial difference between a bad screen and a bad inverter board
How to replace hinges
Where I buy all my parts
The best way to go about taking a laptop apart
How to solder
The art of fixing AC adapters
How to handle a laptop that has had liquid spilled in it
what to do when a laptop overheats
how to replace CD/DVD drives, RAM, processors, hard Drives and wireless cards
and much, much more!!

There are 40+ videos in this collection, totaling over 10 hours of HD video. Yes, I said 10 hours. This content is immediately available upon purchase. Here's a list of some of the videos included in this collection:

Introduction
Tools
Batteries
CD/DVD Drives
Motherboards
How to Take a Laptop Apart
Power Problems - Gateway Laptop
Toshiba Laptop Power Jack Fix
Motherboard Replacement - HP DV6000
Key Not Working- Sony Vaio
Replace Keyboard - Gateway Laptop
Vaio Ribbon Repair
Power Jack - Dell B130
Power Jack Repair - Gateway Laptop
Testing a Hard Drive With KNOPPIX
Replace Cracked Screen - Aspire 3680
Won't Boot Up - HP DV6000
Replace LCD Cover - Acer Aspire 3610
Replacing a Keyboard - Dell Inspiron 1521
Screen Back Cover - Dell Inspiron 1521
Screen Replacement - Toughbook CF-W5
Power Jack Fix - Acer Aspire 3680
Touchpad Buttons Not Working
Vaio Laptop Power Jack Repair
Water Damaged Laptop - Toshiba
HP DV8000 - Spilled Iced Tea - Keys Not Working
Spilled Beer on a Dell Inspiron 1525
Checking a DC Jack on an HP DV5
...And That's Not Even Nearly All Of Them!

"I would not have released these videos if they weren't ready. Even though I had some footage over a year ago, I wanted to wait until I had enough material, fully edited and in FULL HD to blow you guys away! I hope you like the package I put together for you!"
- Steve Cherubino (creator of Podnutz.com)

These videos have been years in the making. These are not your low quality, inexperienced YouTube videos you've probably seen in your travels. Steve Cherubino is a laptop specialist who has had people send him laptops to fix from all over the world. These are real repairs from a real technician who has owned his very own computer repair shop in Philadelphia PA, and has taken apart and repaired hundreds of laptops!

Instantly Downloadable!

Once you click the Buy Now button below you will have access to these videos and be able to download and watch them instantly!

GET NOW!!

ILLUSION MAGE

noreply@blogger.com (the.denzo) — Tue, 08 Feb 2011 10:18:00 +0000

Announcing: The Revolutionary 3D Software That Has Helped 6, 100 People In 67 Countries Create Stunning 3D Animations From The Comfort Of Their Own Home...

Now YOU Can Create Professional 3D Animations, Games And Graphic Models Like Pixar and Dreamworks In 2 Hours or Less...

From the Desk of Seth Avery ,
3D Enthusiast & Creative Director

....................................................................................................................................................................

Dear 3D Animator,

Have you always wanted to create your own animations or 3D Games?

What if I told you that you can produce animations and models like Pixar or Walt Disney easily and quickly from the comfort of your home.... with the same software that leading European studios are using.

The good news is there's a sea change is sweeping across the animation industry, transforming thousands of lives and home studios and it lies...in a powerful software that allows the 'little guy' to make...

BEAUTIFUL Animations With Minimum Effort...

Listen carefully: If you're after a professional 3D software that will allow you to create cutting-edge 3D animations, movies or games easily and cannot afford big name software like Maya or 3D Max, then this might just be the most important letter you will ever read.

“ Producing 3D Animations & Graphics
Have Never Been THIS EASY... ”

Here is what you should know:

Creating 3D animations can be a time consuming endeavor and demanded that you spend thousands of dollars purchasing high-end studio software..

As a matter of fact, you needed hours and hours of time and most people, whether you are a professional or you're just starting out, don't have that kind of money to devote to

high-end studio animation software.

But thats all about to change....

So to answer this question, and the cries of people just like you, I present to you...

Introducing...

IllusionMage - The Complete 3D Creation
Software Suite & Video Training Package
"Easily The Most Powerful 3D Creation Software On The Planet!"

What you're getting is an advanced animation software and a full featured integrated modelling, rendering, animation and real-time 3D game creation package. This hi-end software suite allows you to:

- Create high quality 3D graphics
- Produce your own cartoon animated film
- Draw and animate 3D models
- Design your own 3D game easily
- Create real-time interactive 3D content
- Creating and render exceptionally rich & realistic natural environments.

Let your imagination come alive with the easiest way to create stunning animations!

“ Get The SAME Software That Leading
Animation Studios Are Using! ”

Over the last decade, this has evolved as an in-house tool for leading European animation studios. This is your chance to get your hands on a professional hi-end 3D creation program without paying an arm and a leg.

With illusionMage ™ suite & blender video tutorials, you can weave your own web of magic. You DO NOT need to attend expensive courses or have any experience to use this. You will be able to produce "hollywood" 3D computer animations and models like movie studios quicker and easier than you've ever dreamed of.

“ If You Think Maya or 3D Max is Good,
You Ain't Seen Nothing Yet! ”

Let me lay it out for you: this is a complete solution for high end 3D-production at an unprecedented price.

It has a robust feature set similar in scope and depth to other high-end 3D software such as SoftimageXSI, Cinema 4D, 3Ds Max and Maya.

Get the best of both worlds in 1 software - It combines the aritechtural power of 3D Studios Max and Animation Effects of Maya

These features include advanced simulation tools such as rigid body dynamics, fluid dynamics, and softbody dynamics, stop motion animation, modifier based modeling tools, powerful character animation tools.

Even better, you can also create dynamic 3D models by RTS animation so models can move back-and-forth, float, or rotate. It also offers professional CG artists a complete toolset for creating exceptionally rich and realistic environments.

" Thanks for offering this Seth. This is a 5-star product! The results of a well lit render at the best resolution settings is truly stunning, verging on the photorealistic."

Ken Foreman - Houston, TX

“ Learn EXACTLY How To Create Your First Animated Model With Software & Video Training ”

IllusionMage & Blender contains the software, a complete 250+ page illustrated digital manual, tutorials, and over 8 hours of video training, tutorials and examples

“ Discover How To Create Animated Cartoons
Like Toy Story and Madagascar Within Minutes... ”

Yes. Thats right. You can create your own cartoon series right at your computer with illusionMage. Produce cartoon animations such as Toy Story, Madagascar, Shrek from home with step-by-step tutorials...

But more importantly, you too can create professional looking 3D objects, add animation, and use a wide range of 3D effects like professional studios without paying for expensive software...

It is an all-in-one 3D creation program suite that is suitable for both beginners and experts. In fact, you will be able to create your first animation model within 53 mins even if you've no experience...

It can be used for modeling, UV unwrapping, texturing, rigging, skinning, animating, rendering, particle and other simulating, non-linear editing, compositing, and creating interactive 3D applications

As I have already said, this suite is just as advanced as 3D Max & Maya, however the best way to demonstrate it's abilities is through some pictures and videos of real editing work.

GET NOW!