Enet-World | World Best Infotainment Blog

MicroSD Card Virus Infected & All Files Turned into Shortcuts?

2014-03-30T18:56:00.001+06:00

Troubleshooting folders become shortcuts in SD card

As a digital device user, have you ever come across this kind of weird situation with the MicroSD card? For instance, you connected the cell phone (SD card) to your PC. It is well recognized as usual. But when you attempted to access the files inside, all of the files and folders became shortcuts!

I met the problem a few days ago. One of my close friends came to my house with panic. She said she had something serious what I must do my best to help. She took out her MicroSD card and said all the data inside are now screwed up. I connected it to my computer (runs with Windows 7 home basic) via a card reader. And found the symptom was exactly what I described in the first paragraph.

Luckily the issue with her SD card is not that difficult to handle. Why do I say so? Keep reading for the causes and how to fix the folders became shortcuts issues. And possibly recover all your original files if you are lucky enough.

Why folders suddenly became shortcuts?

Is it caused by certain malicious software or virus? You are right! As far as I can see, the codes for these malware can be BUOUFO, QWERT, AUTORUN etc. For example, Kaspersky detects it as Trojan.Win32.VBKrypt.cvcu when you take a further look at the properties of the shortcut folder pointing to a 0x29ACAAD1.exe file.

Don’t be over scared, because as an old saying goes: “where there is a problem, there is a solution”!

How to repair the infected SD card and restore all files?

Connect your infected Micro SD card to a Windows based computer.
Go to Start -> Run option -> type “cmd”
Then type this command attrib -h -r -s /s /d f:\*.* and press Enter. Note: remember to replace f: with the MicroSD card letter shown under “My Computer”. And don't add any more or less space.
Now see if your files or folders become normal.

I had the commands and they helped resolved my friend’s problem. Are you the lucky guy as well? Congratulations!

What if the command wouldn’t help?

Don’t give up! Maybe the virus has hidden itself quite well. Here are the step by step instructions to get that fixed and make sure your MicroSD can be used again. Hopefully it won’t take more than three minutes.

Open the antivirus on your PC. (Don’t have installed any one? If you prefer freeware, I’d recommend Microsoft Security Essentials. Of course there are many more options available on the market.)
Do a thorough scan of the disk (your MicroSD card represents) and clean the virus out. Now check your disk files, see if they are normal. Nope? Go to step 3.
Now you have to format your memory card. Make sure o a quick-format or complete-format.
If your PC or digital device refuses to format it by showing certain errors. Go get this third-party formatting program called “HP USB Disk Format Tool” and it should work.
Had some important files inside the card? Wondering if they are gone after card formatting? Not to worry! Check this SD card recovery article for how to get them back.

Be careful next time!

Don’t want to suffer similar folders shortcuts problems? Now take care! Here are a few useful tips for SD card security.

Do not try connect it to too many computers, especially those you are not familiar with.
Perform regular PC health check daily or weekly.
Make multiple backups of those important data.

How to Fix Files Become Shortcuts in Removable Media

2014-03-30T18:54:00.000+06:00

How to Fix Files Become Shortcuts in Removable Media

Have you ever met this kind of wired situation? Your file folders suddenly became shortcuts when you connect the removable media (USB pen drive, external hard drive and sd memory card etc.) to your computer and try access data in it. You have sizable files say a couple GB in the drive, but it just shows 1KB or 2KB and so on. You also tried the removable media in a different PC, still the same problem occurred. How to make the file folders accessible again or how to recover lost files first of all?

What May Cause Your Files Become Shortcuts?

Yes, you may already guess it - probably the virus or Trojans (like BUOUFO, QWERT etc) or autorun.inf worm. Your pen drive or memory card may be suffered or infected. As a result, the files or folders become "hidden". Sometimes you can make them visible again by switching to non-hidden mode, while most of the times you have to kill those virus or Trojans.

How to Fix Folder Become Shortcuts Problem?

To start with, do not format the removable media immediately as formatting will make the data insides much harder to be recovered, and format won't be necessary to kill the virus. Sometimes it won't let you format the device. For example autorun.inf worm will stop a flash drive from being formatted. So follow the steps below and see if you can make things right.

#1 Check whether the files are not in hidden mode.
Click on "Start" -->Run-->type cmd and click on OK.
Here I assume your removable drive as G:
Enter this command: attrib -h -r -s /s /d g:\*.* (replace the letter g with your usb or memory card "removable drive" letter showed under "My Computer").
Then check if your real files will be showed.
Note: if you have formatted the drive, simply bypass this step and go to #2 directly.

#2 If your files won't show. You have to use some strong anti-virus or anti-malware programs to eliminate the virus or trojans. Download freeware Malwarebytes Anti-Malware from CNET and install it on your computer. Then connect your removable media. Run the software to perform a "Full Scan" of the drive which may contain those virus or trojans. '); Default selected option is "Quick Scan". This way should kill those problem makers. After that see if the file folders will be accessed normally.

#3 If you find your folder files missing, do not worry. Take a try of this data recovery tool (take the free trial) and see if you can recover the deleted files or folders. This way should be your final solution.

Are the solutions helpful for fixing your folder shortcuts problem in your USB flash or memory card etc? Making your voice heard in comments is always great.

Note: folders shortcuts problems vary a lot here and there, I am unable to solve every trouble my readers asked in the comments. As a result, I list several articles I found helpful on the Internet that is similar to the topic in the following. Hope they will also help you. Best regards!
Fix Folders Become Shortcuts Caused by Virus
Files on flash drive changed to shortcuts

How to Recover SD Card after Formatting

2014-03-30T18:50:00.001+06:00

Recover SD Card after Formatting

Formatted Your SD Card Mistakenly?

Accidentally press the format button of your camera? SD card is unexpectedly formatted by your naughty daughter/son? Be relaxed! As one of the most possible reasons of memory card or hard drive data loss, the accidentally formatting process actually is not the real killer of your SD card data. It often depends on what you’ve done to this SD card since then. In fact, after the formatting process, especially as you are doing a quick formatting, the data inside this SD card is not erased completely as you normally think. It is still saved there. But, it is also very vulnerable since any new file on the same card can be a great threat to the original data. So, in this regard, it is absolutely possible for you to get all lost data back from this formatted SD card as long as it is not overwritten by anything new on the same SD card.

What you need is only a SD Card Data Recovery Freeware, which can thoroughly scan your formatted SD card and retrieve all your files back successfully.

SD Card Data Recovery Freeware

SD Card Data Recovery Freeware download

This SD Card Data Recovery Freeware is a free and professional data recovery program, which is specially designed to restore different files (including photos, videos, music and more) back from a phone/camera SD card. It is always compatible with all Windows versions and also offered multiple advanced data recovery options for one to cope with nearly all data recovery problems. It supports different SD card brands, such as SanDisk, Transcend, Kingston, Lexar, PNY and other prevailed ones. Overall, it is really executive and powerful.

How to Recover Lost Files back from This Formatted SD Card?

With this SD Card Data Recovery Freeware, you always can efficiently get back all your formatted SD card files back in several simple steps:

Step1. Download this Freeware to your computer and install it with the help of its step-by-step Wizard guidance.

Step2. Insert this formatted SD card to your computer via a card reader and prepare to restore all your lost files. (But, if you do not have a card reader, you also can directly plunge your camera or smart phone, which contains this SD card, to your computer instead.)

Step3. Select the right data recovery option to restore your lost files. (Each data recovery option always has its own characters. So, you’d better pick out a proper one for your problem. )

Step4. Choose this inserted SD card as the devide

Step5. Start to recover your SD card data. (You should always patiently wait as this freeware is scanning your SD card and recovering your files. Of course, how long you have to wait is often depends on how much data this SD card has contained.)

Formatted Your SD Card for “Card Error” Message?

Sometimes, even though you are very, very, very careful about your SD card data, you may also have to face the “formatted SD card data recovery” problem, especially when you are receiving a “Card Error” message. Have you ever heard of this problem? In fact, as I know, when one receives a “Card Error” message, it is also difficult for him to access both of this SD card and the inner contained data. That’s why many people would have to directly format his SD card for future use. However, in this way, he will also be forced to encounter the formatted SD card data recovery problem, right? In this case, he also needs our mentioned SD Card Data Recovery Freeware.

Reformatted Your SD Card for Other Card Problems?

Have you reformatted your SD card for some card problems? Have you tried to restore files from a SD card that has been formatted for several times? In our days, there are also many other reasons that you have to format your SD card without a data backup, such as the logical corrupted SD card problems, virus infected SD card problems, RAW SD card problems and more. No matter what problem you have encountered, no matter how many times you’ve formatted this SD card, you absolutely can adopt an efficient data recovery program to get back your lost/inaccessible data before all the original data is completely rewritten. What you should do is only to apply this SD Card Data Recovery Freeware.

Recover any Hard Drive Data with This Freeware?

By using this SD Card Data Recovery Freeware, you’d better not cheated by its name. In fact, with SD Card Data Recovery Freeware, you can not only get back all your data from a SD card/memory card and also can regain data from a computer hard drive, internal or external.

Some Suggestions That You Should Follow:

1.As you realize your important data is lost, you’d better immediately stop using this memory card or hard drive in case that anything new will rewrite your original data.

2.After experiencing these data recovery problems, you’d better get accustomed to back up everything important at least on two memory cards or hard drives.

3. No matter what happens in the future, you should always be careful about your important data.

All Files Turn into Shortcuts in Micro SD Card: How to Recover Files back?

2014-03-30T18:47:00.000+06:00

How Can I Fix Micro SD Card Files that all Tuned into Shortcuts?

Hey, here is my issue: Yesterday, I inserted my Samsung smartphone to the PC of my friend for transferring some interesting games. It worked perfectly. But, now, trying it on my computer, all the files on the inner Micro SD card of this phone have tuned into shortcuts. I also cannot open them. I don’t know what to do… How can I get my files back?

Micro SD Card Photo Recovery Freeware

OK! It sounds like your Micro SD card is virus-infected on the PC of your friend! In fact, these are many such viruses that would spread via some removable storage devices and change all stored files into shortcuts. Don’t worry! All your Micro SD card files are still saved there. You just cannot see them at this moment.

Therefore, here, we’ll introduce you three methods to bring all your files back:

Method1: Easily Recover Micro SD Card Files with Data Recovery Freeware

Due to virus infection, your Micro SD card files only become invisible and inaccessible to you now, not being completely erased or wiped out. Therefore, with the help of a Micro SD Card Data Recovery Freeware, you always can easily retrieve all your wanted files back successfully:

Step1: Install this card data recovery freeware after free downloading it to your computer.

Step2: Connect this infected Micro SD card to your Windows computer.

Step3: Click the right data recovery mode and target recovery devices to begin the scan.

Step4: Preview and select all files you want to recover after the thorough scanning.

Step5: Click “Recover” to being all your selected files back.

PS: If you still wonder to bring your files back completely, you should pay attention to some tips:

* Do not format this Micro SD card or write any new files on it in case of data loss.

* Do not save all restored files on this Micro SD card for any annoying trouble.

* Do not do any change to your memory card or hard drive without a data backup in the future.

Method2: Show All Hidden Files back Step by Step

Some similar viruses will also hide your Micro SD card files and mislead you with some unworkable shortcuts. Therefore, in this regard, you also can easily unhide all your files back:

Step1. Click “Start” to open “Run” on the appearing list.

Step2. Enter “control folders” and click “OK”.

Step3. Open “View” tab and find out “Hidden files and folders” option.

Step4. Check whether “Show hidden files and folders” is marked. If not, just mart it right now.

Step5. See whether all your Micro SD card files are all back.

PS: This method is not workable with all virus-infection problems.

Method 3: Bring Micro SD Card Files back with Antivirus Programs

As the commonest method to fix a virus-infection problem, an antivirus program always can help us kill all existing viruses on our PC, hard drive or memory card in a few simple clicks. So, in order to access your Micro SD card files again, you also can use a powerful antivirus program. There are always many similar antivirus tools out there. You’d better pay much more attention to select a proper one.

PS: But, if Antivirus tools still cannot turn all your wanted files back, you will have to apply the data recovery program mentioned above.

How to Add Infinite Scrolling Load More Post for Blogger [19 Stylish]

2014-03-29T19:04:00.002+06:00

19 Stylish Infinite Scrolling Load More Post for Blogger

Infinite Scroll is not just latest trend but a best way to make visitor view posts of second page in current page itself. This hack simply includes the posts below the posts in same page.
This makes the visitor to view huge posts without switching the pages. Popular sites like Facebook, Twitter, Google+ and many other sites use the same concept.

How to add infinite scrolling to Blogger blogs.

Such that one can easily add the Infinite Scrolling to their blogger just by adding few codes to the HTML widget of blogger. He has used one default simple style for the Load More Post link.
I created some 19 different styles that can make the Load More Post link more attractive.
Using the code is very simple.

Step1:

Select your desired style from list of Styles defined below and click Get Code link and copy the code from the external link.

Step 2:

Goto Layout page. Click Add Gadget Select HTML/JavaScript then paste the code as content and Save.

Different Styles

Style 1Get Code

Load more posts

Style 2Get Code

Load more posts

Style 3Get Code

Load more posts

Style 4Get Code

Load more posts

Style 5Get Code

Load more posts

Style 6Get Code

Load more posts

Style 7Get Code

Load more posts

Style 8Get Code

Load more posts

Style 9Get Code

Load more posts

Style 10Get Code

Load more posts

Style 11Get Code

Load more posts

Style 12Get Code

Load more posts

Style 13Get Code

Load more posts

Style 14Get Code

Load more posts

Style 15Get Code

Load more posts

Style 16Get Code

Load more posts

Style 17Get Code

Load more posts

Style 18Get Code

Load more posts

Style 19Get Code

Load more posts

Apple New IPhone 6 Features Review and Price in bangladesh

2014-03-29T15:54:00.002+06:00

Apple iPhone 6

Apple iPhone 6 - Online Price

Price -coming soon

Apple iPhone 6 comes with ISO 7, Quad core Processor, Retina+ Sharp IGZO capacitive 2540 x 1920 pixels, 4.7 inches touchscreen, 16M colors, 16/32/64/128 Storage 2GB DRR3 RAM, 13 MP rear and front 2 MP Camera, EDGE, GPRS, GPS, AGP, BLuetooth, WI Fi, 3G and 4G Smartphone by Apple.

Specification:-

NETWORK
	2G Network	GSM All version
	announced	2014, February
	Release Date	Coming soon
DISPLAY
	Type	Retina+ Sharp IGZO AMOLED capacitive 2540 x 1920 pixels, 4.7 inchestouchscreen, 16M colors
	Size	2540 x 1920 pixels, 4.7 inches
SOUND
SOUND	Speakerphone	Yes
MEMORY
MEMORY	Storage	16/32/64/128GB, 2GB RAM DDR3
DATA
	GPRS	Yes
	EDGE	Yes
	Speed	HSDPA, LTE
	WLAN	Wi-Fi 802.11 a/b/g/n, dual-band, DLNA, Wi Fi Direct, Wi Fi hotspot
	BlueTooth	Yes v4.0 with ADP, LI

	USB	MicroUSB 2.1 Host port
CAMERA
	Primary	13 MEGA PIXEL
	Video	Yes, 2160p@60fps,Full HD
	Secondary	Yes, 2 MP,1080p@30fps
FEATURES
	Operating System (OS)	ISO 7
	Processor	Quad core Processor
	Messaging	SMS (threaded view), MMS, Email, Push Email, IM, RRS
	Browser	HTML5
	Radio	TBD
	Games	Yes + Downloadable
	GPS	Yes, with A-GPS and AGP support with Gonolla

Show Post Title before Blog Title in Search Results

2014-03-25T20:18:00.000+06:00

If you're using blogger for your blog then you may notice search engines show your Blog Title first instead of Post Title. Certainly this will affect the flow of visitors in your site. Because when someone is searching for a topic he would like to click on the site that matches his search words. But if your blog title appears first then the visitors may skip your site!

What do you see here? A search topic like that- Cell phone quality using IMEI. Also look at the first 2 results. The first one showing- How to Check Cell Phones Quality Using IMEI. The second one showing- Tips n Tricks: How to Check Cell Phones Quality Using IMEI.

In the second search result the Blog Name Appears first. Tips n Tricks doesn't match the search result.

But in the first result you notice that Marks PC Solution appears first. But blog name is not showing first. Rather you can see the Post Name. So which one should you visit as a visitor? Certainly the first link.

Now follow the simple instructions below to apply this on your blogger site.
Sign in to your blogger account and go to the Dashboard or Design.
Now go to the Template option and Click on Edit HTML. (Please Backup your template if you're a beginner)
You will see the Template window. Press Ctrl + F and type the red colored code in the search box to find it: <title><data:blog.pageTitle/></title>
Now select the red marked code and replace it with the following code:
<b:if cond='data:blog.pageType == "item"'><title><data:blog.pageName/> | <data:blog.title/></title> <b:else/><title><data:blog.pageTitle/></title></b:if>
You're almost done! Now save the template and close it.

You may not be able to see the effect immediately. Because search engines might require few days to update their databases or crawl your blog. However you can see the effect immediately in your browser's tab. Hope it will boost your site's traffic. And certainly it will be helpful for SEO too.

Automatic Recent Posts Slider With jQuery For Blogger

2013-04-14T13:01:00.001+06:00

Recent posts slider is a best way to show of you blog's recent posts as a slide show.You may see the slider such slider in many wordpress blogs but when coming to blogger it is certainly not much seen.This widget is shared by Abu-Farhan and using my own tricks further I customized this plugin to works perfect with your blog.If you are thinking that customization's will be hard then you are wrong,this gadget is very easy to customize and very easy to add.You don't need to add images,text or any links like other sliders all is Automatic :D. Here I am giving a tutorial about adding recent post slider to blogger.First take a preview on slider.

How To Add This Slider To Blogger?

Step 1 - Applying Styles

Go to Blogger Dashboard > Design > Edit HTML. (In new User Interface It Is - Dashboard > Template)
As always download a copy of your template first.
Now find for ]]></b:skin>
Add below code just before ]]></b:skin>

/* START EasySlider By helperblogger.com */

#slide-container {
    height: 360px;
    position: relative;
    width: 480px;
}

#slider {
    height: 360px;
    left: 25px;
    overflow-x: hidden;
    overflow-y: hidden;
    position: relative;
    width: 480px;
    font-family: calibri;
}

.slide-desc {
    background: transparent url(http://i195.photobucket.com/albums/z105/dantearaujo/darkbg.png) repeat scroll 0 0;
    color: #FFFFFF;
    padding: 10px;
    position: absolute;
    right: 0px;
    text-align: left;
    top: 0;
    width: 200px;
    z-index: 99999;
}

.slide-desc h2 {
    display: block;
}

.crosscol .widget-content {
    position: relative;
}

#slider ul, #slider li,

#slider2 ul, #slider2 li {
    margin: 0;
    padding: 0;
    list-style: none;
}

#slider2 {
    margin-top: 1em;
}

#slider li, #slider2 li {
/*

define width and height of list item (slide)

entire slider area will adjust according to the parameters provided here

*/
    width: 480px;
    height: 360px;
    overflow: hidden;
}

#prevBtn, #nextBtn,

#slider1next, #slider1prev {
    display: block;
    width: 30px;
    height: 77px;
    position: absolute;
    left: -30px;
    text-indent: -9999px;
    top: 71px;
    z-index: 1000;
}

#nextBtn, #slider1next {
    left: 520px !important;
}

#prevBtn, #nextBtn, #slider1next, #slider1prev {
    display: block;
    height: 77px;
    left: 0;
    position: absolute;
    top: 132px;
    width: 30px;
    z-index: 1000;
}

#prevBtn a, #nextBtn a,

#slider1next a, #slider1prev a {
    display: block;
    position: relative;
    width: 30px;
    height: 77px;
    background: url(http://i195.photobucket.com/albums/z105/dantearaujo/prev.png) no-repeat 0 0;
}

#nextBtn a, #slider1next a {
    background: url(http://i195.photobucket.com/albums/z105/dantearaujo/next.png) no-repeat 0 0;
}

/* numeric controls */

ol#controls {
    margin: 1em 0;
    padding: 0;
    height: 28px;
}

ol#controls li {
    margin: 0 10px 0 0;
    padding: 0;
    float: left;
    list-style: none;
    height: 28px;
    line-height: 28px;
}

ol#controls li a {
    float: left;
    height: 28px;
    line-height: 28px;
    border: 1px solid #ccc;
    background: #DAF3F8;
    color: #555;
    padding: 0 10px;
    text-decoration: none;
}

ol#controls li.current a {
    background: #5DC9E1;
    color: #fff;
}

ol#controls li a:focus, #prevBtn a:focus, #nextBtn a:focus {
    outline: none;
}

/* END EasySlider By helperblogger.com */

You can edit above CSS values as you wish.You may use our HTML Editor to see a live preview of your changes.(Note - If you are editing this gadget in HTML Editor then you have to add all three codes simultaneously in editor)

Step 2 - Adding JavaScript

Now find for </body> tag
Add below code just after/below </body> tag.

<!-- Start easy content slider by helperblogger.com -->
<script src='http://ajax.googleapis.com/ajax/libs/jquery/1.6/jquery.min.js' type='text/javascript'></script>
<script src='http://accordion-template.googlecode.com/svn/trunk/easySlider1.7.js' type='text/javascript'></script>
<script type='text/javascript'>
//<![CDATA[
$(document).ready(function(){
 $("#slider").easySlider({
 auto: true,
 continuous: true
 });
});
//]]>
</script>
<!-- End easy content slider by helperblogger.com -->

Now save your template.

Adding The Gadget

Now go to Page Layout
Add a Gadget > HTML/JavaScript
Paste below piece of code and save it.

<div id="slider">
<script style="text/javascript" src="http://code.helperblogger.com/easySlider.min.js"></script>
<script style="text/javascript">
 var numposts_gal = 6;
 var numchars_gal = 150;
 var random_posts = false; // random posts
</script>
<!-- replace with your web address (marked with red color) -->
<script src="http://yourblog.blogspot.com/feeds/posts/default?orderby=published&alt=json-in-script&callback=showgalleryposts&max-results=999999"></script>
</div>

Now replace yourblog.blogspot.com with your own blog url.[Code Line - 10] (Only change blog URL don't change any other things.

To change number of post find this var numposts_gal = 6; line in above code. (Code Line - 4)

If you want to change number of characters to show in description find this piece of code var numchars_gal = 150; (Code Line - 5)

Now save your all the changes and you are done.Visit your blog to see this beautiful slide.

Arrange blog posts in gallery view in blogger

2013-04-12T09:26:00.001+06:00

Gallery view means arranging the blog posts one after another side wise as in a magazine. This is also referred to as magazine view. Unlike usual blogs, you can change your blog from the monotonous old look into a magazine side-by-side view.
This image shows how post will be arranged side by side.

This is how to do it

Steps :

Go to Blogger Dashboard => Design => Edit HTML
Look for the piece of code ]]></b:skin>
Add the following piece of code after this line
Save your template

Code Starts ->

<b:if cond='data:blog.pageType != "static_page"'>
<style>

#main-wrapper {
margin:0px 0px 0px 8px;
float:left;
border:0;
padding:0px;
background:none;
overflow:hidden;
width:760px;
}

.post{
background:url(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjyozpp3Ov2hasAlsf83DO5eeec-cQCU_IW_FGdt_7Y6D8G5UhouEfA-QQeyy5fVQk4fWFJXwCsrk7WLTPP-pHLmea5v3-PXnv1KNWCa8Oy1RMNFPZ7yK6qdr-skqcj5Xxu685TMqEv26-W/s1600/post.jpg);
background-repeat:no-repeat;width:227px;height:195px;
margin:0px 15px 20px 0px;
padding:10px 0px 0px 10px;border:0;
display:inline;float:left;overflow:hidden;position:relative;}

.post img {max-height:151px;max-width:217px;padding-top:8px;}
.post h3{font-size:11px;padding-top:5px;margin:0;line-height:6px;}
.post-labels{display:none;}.post-author{display:none;}
.post-body{padding:0px;}
</style>
</b:if>

Code End

Suggestions :

Edit width:227px;height:195px in above code to resize the size of each block
~~This piece of code shows bugs when used for formatting individual pages in blog, I'm trying to fix it. If you find any solution do let me know. Works perfectly otherwise~~ "EDIT - Fixed"
If you dont want the background image remove the linebackground:url(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjyozpp3Ov2hasAlsf83DO5eeec-cQCU_IW_FGdt_7Y6D8G5UhouEfA-QQeyy5fVQk4fWFJXwCsrk7WLTPP-pHLmea5v3-PXnv1KNWCa8Oy1RMNFPZ7yK6qdr-skqcj5Xxu685TMqEv26-W/s1600/post.jpg);

Apple iPhone 5 in Bangladesh

2013-03-27T03:25:00.000+06:00

Apple iPhone 5 - Description and Specifications

2G Network GSM 850 / 900 / 1800 / 1900 - GSM A1428

CDMA 800 / 1900 / 2100 - CDMA A1429

3G Network HSDPA 850 / 900 / 1900 / 2100 - GSM A1428

CDMA2000 1xEV-DO - CDMA A1429

4G Network LTE 700 MHz Class 17 / 1700 / 2100 - GSM A1428 or LTE 850 / 1800 / 2100 - GSM

A1429 LTE 700 / 850 / 1800 / 1900 / 2100 - CDMA A1429

Alert types Vibration, proprietary ringtones

Battery

Performance Stand-by: Up to 225 h (2G) / Up to 225 h (3G)

Talk time: Up to 8 h (2G) / Up to 8 h (3G)

Music play: Up to 40 h

Battery Type Non-removable Li-Po 1440 mAh battery (5.45 Wh)

Bluetooth v4.0 with A2DP

Camera Features Auto-focus, LED flash, Simultaneous HD video and image recording, touch focus, geo-tagging, face detection, panorama, HDR

Camera Pixel 3264 x 2448 pixels

Camera Resolution 8 Megapixel

Chipset Apple A6

Colors Available Black/Slate, White/Silver

Data Speed DC-HSDPA, 42 Mbps; HSDPA, 21 Mbps; HSUPA, 5.76 Mbps, LTE, 100 Mbps; EV-DO Rev. A, up to 3.1 Mbps

Dimensions 4.87 x 2.31 x 0.30 inches

Display Resolution 640 x 1136 pixels (~326 ppi pixel density)

Display Size 4.0 inches

Display Type LED-backlit IPS LCD, capacitive touchscreen, 16M colors, Corning Gorilla Glass, oleophobic coating

EDGE Yes

Front Camera 1.2 MP, 720p@30fps, face detection, FaceTime over Wi-Fi or Cellular

GPRS Yes

GPS Function Yes, with A-GPS support and GLONASS

Graphics Processing Unit (GPU) PowerVR SGX 543MP3 (triple-core graphics)

Internal Memory 16/32/64 GB storage

Java No

Loudspeaker Yes

Memory Card Slot No

Messaging iMessage, SMS (threaded view), MMS, Email, Push Email

Multitouch Yes

Operating System iOS 6, upgradable to iOS 6.1

Other Features - Active noise cancellation with dedicated mic

- Siri natural language commands and dictation

- iCloud cloud service

- Twitter and Facebook integration

- TV-out

- Maps

- iBooks PDF reader

- Audio/video player/editor

- Organizer

- Document viewer

- Image viewer/editor

- Voice memo/dial/command

- Predictive text input

Processor Dual-core 1.2 GHz

Radio No

RAM 1 GB

Release Date September 2012

Sensors Accelerometer, gyro, proximity, compass

SIM Card Type Nano-SIM

USB v2.0

Video Recording 1080p@30fps, LED video light, video stabilization, geo-tagging

Web Browser HTML (Safari)

Weight 112 g

Wireless LAN Wi-Fi 802.11 a/b/g/n, dual-band, Wi-Fi hotspot

এবার পালা চাইনিজ (China) উইন্ডোজের………..

2013-03-25T08:00:00.000+06:00

কম্পিউটার চালনায় নিজস্ব অপারেটিং সিস্টেম [ওএস] ছাড়ার ঘোষণা দিয়েছে চীন। ওপেনসোর্স ভিত্তিক ওএস ডেভেলপ শেষ পর্যায়ে রয়েছে বলে এক প্রতিবেদনে জানিয়েছে বিবিসি। উবুন্টুর যাবতীয় সুবিধা যুক্ত এই উইন্ডোজ 'কাইলিন' নামে আত্মপ্রকাশ করতে পারে। কাইলিন ডেভেলপে বেইজিং গবেষণা সংস্থাকে সহায়তা করছে সফটওয়্যার নির্মাতা প্রতিষ্ঠান ক্যানোনিক্যাল।

আপাতত ডেস্কটপ কম্পিউটার এবং ল্যাপটপে কাইলিন চালানো যাবে। তবে পরবর্তী সংস্করণগুলোতে দরকারি কাজে সহায়তার জন্য বিল্টইন আকারে চাইনিজ সফটওয়্যার [যেমন- ইন্টারনেট ব্রাউজিংয়ের জন্য ওয়েব ব্রাউজার বাইদু এবং অনলাইন কেনাকাটা বিষয়ক সহকারী তাওবাও] সংযোজিত হবে।

পাশাপাশি চাইনিজ ভাষায় কমান্ড দিতে পারবেন ব্যবহারকারীরা। বিশ্লেষকদের মতে, নিজস্ব উইন্ডোজের সহায়তায় প্রযুক্তি খাতে চীনকে আরও এক ধাপ এগিয়ে রাখবে। সবকিছু ঠিক থাকলে আগামী মাসে উইন্ডোজ কাইলিন অবমুক্ত হবে।

বি:দ্র: ভালো লাগলে অবশ্যই জানাবেন।

How to Add a Custom Header in Blogger

2013-03-25T07:42:00.000+06:00

By default, Blogger offers you a default static blog header including title and description of your blog. Further you can display image or logo with your header too. Does it bugging you? The way how your header is. Do you think you could have done more to your header if you can use a custom header instead of default one? If you are not prefer the default header style, you will seek around a way to customize or add a custom header for your blog. As far as if you have tried it by yourself, you may have find that current blog header is cannot move a bit or remove it. So you might have wonder why you can't remove default Blogger header and add a new custom header to your blog. Still wondering?

It seems you can't touch or remove default header to use custom header, but you are absolutely wrong until you find how to do it. Blogger made the header element locked by itself to not to remove by general users. So they have to use default header with blog title, description and eligible header image. But it doesn't mean Blogger doesn't let you hack it and implement a new one. You just need to find how to do it. Here we will discuss how to remove your current header safely without affecting to your existing blog and let you implement your own header on it. I hope you would love to go through and add your own custom header to show off to your visitors. Why waiting? Let's start.

Before You Go:

* If you wanna know how to customize the existing blog header, read How to Customize Your Header in Blogger.

* If you are looking for adding a header image for you blog using dynamic views, read How to Add a Header Image for Dynamic Views in Blogger.

Steps:

1. Navigate to your Blogger Dashboard.

2. Click on your Blog Title.

3. Move on to Template tab from left pane.

Note: Before editing your template, you may want to save a copy of it. Read How to Back Up Your Template.

4. Click Edit HTML button.

5. Tick on, Expand Widget Templates option.

6. Now search for following or similar line of code in your template which relates to your blog header section and alter attributes using regarding attribute information indicated.

<b:section class='header' id='header' maxwidgets='1' showaddelement='no'>

Color Indication Information

- Maximum Widgets in Header Section

This attribute specifies the maximum number of widgets can be included in header section. The default value is 1. So, by default, you can't add widgets more than one for your header section. By changing this value, you can allow adding more widgets for header section.

i.e: <b:section ... maxwidgets='3' ...

- Enable/Disable Adding New Elements

Though you specified a new maxwidgets attribute value, you may not see Add a Gadget link at Page Elements page until you change this attribute value to yes. Change value to yes as you gonna add new custom header.

i.e: <b:section ... showaddelement='yes'

7. Now you can add custom header for your blog. But before you proceed, let's remove current header on your blog. You can find the line similar to below, just after the line of code we discussed in step 7.

<b:widget id='Header1' locked='true' title='Header (Header)' type='Header'/>

8. Change the locked attribute value to false.

i.e: <b:widget id='Header... locked='false'...

9. Now Save Template.

10. Go to Layout tab.

11. Find the Header element of your blog.

12. Now click Edit link correspond to the header.

13. On the immediate pop-up box, click Remove button and confirm removal.

14. Now your default header has been removed. You can see Add a Gadget link at the place where default header was placed before. Click on the link to implement custom header.

15. Now find suitable element for header from the gadget list. You can add image box if you prefer adding custom image as your header or else HTML/JavaScript element to implement header with dynamic or static content with the help of your HTML knowledge.

Note: You can add more gadgets which seems to be suite to your header section (except to the main header) upto the number of widgets you allowed in the header layout code at step 7.

How to Add a Header Image for Dynamic Views in Blogger

2013-03-25T07:34:00.001+06:00

I know, as a blogger, you care your blog design, template or theme you use on your blog. It's reflecting your personality in a way, don't you think? If you are on Blogger platform, there are different sorts of themes you can use for your blog. Most of them are layout templates where you can arrange widgets on your layout easily and I have no doubt that you have heard about wonderful addition of new templates too - Dynamic Views. Have you been using dynamic views with its all glossy and interactive features and enjoying the latest web technologies it use? If you do, you probably need to take different routes to make some changes there. Now let me ask you - Did you ever wanted to add a header image for your blog configured with dynamic views?

It's Possible

Do you think it's impossible as it doesn't work the way it works for layout templates? But nothing to worry about. You can have a header image you like but there's another way out. The thought didn't crosses my mind to write about. But recently a reader, Dilek Turan, came up with this question for me via a comment under the post that I've written about customizing the blog header. But as the route was not valid for dynamic views, I had to explain it. I was wondering why I didn't talk about it until now, but now here I am gonna help you out with it. Better late than never, right?

Get Your Header Image Ready

Unlike in layout templates, on dynamic views, the room for a header image is limited. Actually it's more like a header bar and you need to make use of the space available there. Let me share some information about how you need to have your header image created before you jump onto the tutorial. Well, before that, take a look at Blogger Buzz blog to see how they have added a header image and it will help avoid confusions as I mention about header here.

When you selecting a header image, make sure it has height of 65 pixels. No more or less. Keep it that way and consider the width too. You can use the width of your blog for header image or actually don't need to worry much as you can let the image repeat horizontally. However your header image will be placed behind the blog title on header bar. If you feel you need to remove blog title from the header not to interfere with the header image or your header image already have the title mentioned, then here I'll let you know how to get rid of the header title text too. Well, let's talk about all the tricks while proceeding with the steps below. Now time to get your blog a attractive header.

Steps:

1. Go to Blogger Dashboard.

2. Click on your Blog Title.

3. Jump to Template tab from left pane.

Note: Before editing your template, you may want to save a copy of it.

4. Click Customize button beneath the blog preview.

5. Now you will be directed to Template Designer. Jump to Background pane.

6. Click on the box under the Background image option.

7. Navigate to Upload image from pop up box.

8. Click Choose File button on right.

9. Select the header image you wanna use from your computer and click Open.

Note: Make sure the height of your header image is 65 pixels.

10. Now you might see your header image is all over the blog. Don't panic. Click Done button on pop up box after the image get uploaded.

11. Now click on drop down button with Tile option. Select Don't tile if your image fits with the blog width or select Title horizontally if it's shorter than your blog width to tile image horizontally to cover the width.

More Information:

* Use Alignment drop down button to manage alignment of the header image there.

* Click Remove image link if you need to remove your current header image.

* In case if you wanna get rid of your blog title on header bar, add following CSS style code just before the ]]></b:skin> line in your template.

.header-bar {
display: none !important;
}

Note: If you don't know how to edit your template, read How to Edit Your Blogger Template.

Enjoy :-)

How to Edit Your Blogger Template

2013-03-25T07:33:00.000+06:00

Sometimes you may wonder how do some bloggers take control of their template and customize their templates or position widgets as they need. But there is no wonder at all. All you need is giving up resistance to change and know what you need to do exactly to result your intended changes. As other websites, Blogger is also based on markup languages. Eventhough you are much familiar with HTML and other markup languages, you may unable to find where you should deploy your expertise in Blogger. Are you still wondering where you find and take charge of your template?

Trick and Get into Template?

You don't have to trick your blog to get into your blog template. Blogger offers you the core template code and let you edit your current blog template directly via its Template Editor. All you need is basic knowledge in HTML and you have to spend some time with template code to understand structure and apply relevant changes. If you are not good with HTML sort of markup languages, it may end up being broken too. However you can reset them if something has gone wrong and also backup feature is available for your template. However if you have a reference which depicts how to do all things, you just need to follow and make necessary changes here.

What Can I Find in Template?

There you can find each and every HTML code and relevant styles used to build up your template including widget templates. If you get to template editor, you just need to modify them as your preference with the knowledge of your markup languages. Different people can customize their template in different ways. However you don't need to touch your template always to make changes to your template. Blogger let you customize background image and color of your blog, add and arrange widgets easily, change blog template without stepping into your template and more. But still there are limitations. So here you will find the way to modify your template directly. Wanna edit your template now?

Steps:

1. Go to your Blogger Dashboard.

2. Click on your Blog Title.

3. Jump to Template tab.

Note: Before editing your template, you may want to save a copy of it. Read How to Back Up Your Template.

4. Click Edit HTML button below your blog preview.

5. Click Proceed button to view Template Editor.

6. Tick on, Expand Widget Templates option to expand your element code and see detailed view of your template.

7. Now you can add codes or modify content of your template.

8. Once you done with modifications, Save your template.

How to Customize Your Header in Blogger

2013-03-25T07:21:00.000+06:00

Do you have a blog header on your blog? Does that question sounds funny? Yeah... sort of. I bet you have a header on your blog too. Generally almost all blogs have their own unique header to show off blog title, description or simply to convey the idea behind the blog. In Blogger, you just don't worry about implementing header as it is included right when you create your blog. Basically your blog header will consist of your blog title specified when you create your blog. But it may not the way you wanna set up your blog header. So what if you wanna go beyond and customize your standard Blogger header?

Blogger doesn't restrict you from customizing header and it offers few prominent options to customize yours. By default, once after creating your blog, you will see only blog title on your header. If you are not prefer to keep it as it is, Blogger let you customize your header in these ways.

● Show blog title and description on header

● Show blog title with background header image

● Show blog title and description with background header image

● Add an image as header

● Show header image with blog description

I got few more queries recently asking how to create headers or customize them. Yeah, it seems much easy for most users. But I see some novices couldn't figure it out at all and confused. So I'd like to contribute them via this post to style their blog header. So if you are wondering about customizing your Blogger header, here you will find how to customize your standard Blogger header with available options.

Steps:

1. Go to Blogger Dashboard.

2. Click on your Blog Title.

3. Jump to Layout tab.

4. Now find the Header element just below Favicon element.

5. Click Edit link correspond to your header element.

6. Now you will see the configuration window of your header. Either you can display your blog title and description on header or specify a custom image which is suitable to use as your header. Or you can use mix of them. See what's best suite for you and follow relevant instructions.

Show Blog Title and Description

Just enter values for Blog Title and Blog Description fields.

Note: If you just wanna show only your blog title, leave Blog Description field as blank.

Show Blog Title and Description with Background Header Image

i. Make sure you have entered values for Blog Title and Blog Description fields.

Note: If you just wanna show only your blog title, leave Blog Description field as blank.

ii. Now upload your image from your computer or from web by specifying image URL in relevant field.

Note: If you believe your image is much wider than your blog width, you can select Shrink to fit option before upload or specify image URL, to shrink image and adjust automatically for header.

iii. Now select Behind title and description option under Placement.

Add an Image as Header

i. Upload your image from your computer or from web by specifying image URL in relevant field.

Note: If you believe your image is much wider than your blog width, you can select Shrink to fit option before upload or specify image URL, to shrink image and adjust automatically for header.

ii. Now select Instead of title and description option under Placement.

Add Header Image and Place Blog Description Beneath the Image

i. Upload your image from your computer or from web by specifying image URL in relevant field.

Note: If you believe your image is much wider than your blog width, you can select Shrink to fit option before upload or specify image URL, to shrink image and adjust automatically for header.

ii. Now select Have description placed after the image option under Placement.

7. Now save your header element.

8. Preview your blog and see how it goes.

How to setup Microsoft Office 2013 KMS Host on Windows Server 2012

2013-03-25T07:06:00.000+06:00

Overview:
The KMS activation process for Microsoft Office 2013 is the same as what it was for Microsoft Office 2010. However, the interface to setup the KMS host for Microsoft Office 2013 on a Windows Server 2012 has been updated to use the Volume Activation Tools.

Prerequisites:
Microsoft Office 2013 running on both Windows 7 and Windows 8 client computers can be activated by installing the Microsoft Office 2013 Volume License Pack on a Windows Server 2012, or on one of the other supported host systems including Windows 7 VL edition, Windows 8 VL edition and Windows Server 2008 R2.

Installation:

STEP 1: Download the Microsoft Office 2013 Volume License Pack from the Microsoft Download Center (MSDL) site:

STEP 2: Double-click the downloaded EXE to run it:

STEP 3: Once the EXE finishes running, the Volume Activation Tools wizard will appear:

STEP 4: On the next screen, choose Key Management Service (KMS) and browse to, or specify the name of, the system running Key Management Service. Typically, this would be the system you are running the Volume Activation Tools on:

STEP 5: Next, enter the KMS host (CSVLK) key:

STEP 6: Choose activation method, online or phone:

STEP 7: Activation Succeeded:

Eject and Close CD/ DVD Tray by Mouse!

2013-03-25T06:56:00.000+06:00

Dear Friends! Today I will share a small soft with you. Soft means 22 KB. And its zipped size is just 8 KB! This software is made for handling your CD/ DVD tray.

You can open your CD/ DVD tray by pressing the button or by ejecting option from My Computer. But you can't close it by mouse click from My Computer. With this software you can open or close your CD/ DVD drive just by mouse click!

You can place this software anywhere you like. Maybe you like to keep it on your Desktop. This application supports all running version of Windows:
Windows XP
Windows Vista
Windows 7 and 8
Now do the following to use this cute soft:
Download the zipped folder from the link below.
Unzip it.
Keep it on your Desktop
Double click to eject CD/ DVD tray, and click twice again to close it.

Tips: If you're using Windows 7 or 8 then right click on it and select pin to task bar. Now you will see a quick link of this software on your task bar. And you will be able to close and open your CD/ DVD tray just by single click!

Self Assessment Test by Brain Works !!

2013-03-25T06:52:00.000+06:00

Today I'm gonna talk about something different. It can be compared to a psychological test. If you take this test you will be able to know which part of your brain works more than other parts. How you respond to new situations or experiences.

This test will also help you to realize what will be the effective learning system for yourself. It will show you how you use the parts of your brain and by what percentage.

This self assessment test is prepared by Synergistic Incorporation Ltd.

Download the zipped file from the link below and unzip it.
Click twice on Brain.exe file.
Now you will see the Welcome Screen. Click anywhere or press any key to continue.
Enter Your Name and press Enter.
Read the Introduction message if you want or press any key to continue.
Another message may appear. Read this or skip. Reading will increase your understanding of this software.
Now you've to answer 20 questions. Answer all the questions. You can use mouse or press A, B or C to answer a question. (Remember: There is no right or wrong answer)
When you finish you will see an image of your brain usage. Focus on your percentage of Auditory, Visual, Left and Right brain usage.
Then hit on Personal Evaluation and read the full report about your brain. That's it.

Note: When you run this application on your PC you can't close it, or go to the desktop. To close this program press Alt + F4. And simply press Start + D to go to the Desktop.

Download Free Flash Game: Flamingo Drive Download

2013-03-25T06:41:00.000+06:00

Gamers love to play large games like GTA, NFS, IGI. But still few of you may like to play Flash Games like me. Though I love to play Racing, Action or Cricket but still I've a great attraction to small Flash Games. Today I'm gonna share such a game with you. It is named as Yet in Africa- Flamingo Drive. You can download this for free!

This game is very small in size. You've download a zipped file which is less than 2 MB. It is a flash game. You've to operate it by mouse.

Download the zipped file from the link below and unzip it.
Now click twice on Flamingo Drive to run the game.
Just at the right bottom corner you will see the Play button. Hit this 4 times.
Now you're ready to play.
You've 5 chance available to hit.
In each chance you've to click twice. The first click will set your direction. And the second one will set your power.
You can also see the preview just at the bottom of the game.
Play n Enjoy!

Activate Windows 8 Just by Double Click (All Versions) !!!

2013-03-25T06:35:00.000+06:00

Couple of weeks ago the final version of Windows 8 has been launched by Microsoft. Versions are-
Windows 8
Windows 8 Pro
Windows 8 Enterprise
These are the main versions which have other segments too. ie. Pro N, Pro VL, Enterprise N, Enterprise VL etc.

If you've any trouble to activate Windows 8 you can solve it just by double click. Have any doubt? Try it now!

Whatever the version of your Windows 8, a single activator can activate any all versions. Follow the steps below:
Download the zipped file from the link below.
Now extract the file. (It can also work in zipped condition)
Then double click on the file Windows 8 Activator.exe.
Now within 2/3 seconds your PC will be restarted.
After restarting you will get some message about activation. Hit OK button in the all boxes that appear.
Enjoy the benefit of full version.

If you can successfully perform this task, then your Windows activation status will be as image shows below:

Get Facebook Comment Notifications via Email in Blogger

2013-03-25T06:30:00.000+06:00

Did you implement Facebook comment social plugin on your blog? We have already discussed about implementation via Add Facebook Comment Social Plugin to Blogger post. If you have implemented it on your blog, you may have find that you can moderate comments easily with Facebook comment moderation tool. But as you have more number of posts on your blog, you may find it buggy to keep an eye on Facebook comment moderation tool to see recent comments made on your blog. Sometimes you may have missed comments that needs more attention and users may have to wait for long hours until you reply for them. Therefore you will find it somewhat disturbing as no way of notifying new comments. Would you like to get notified whenever someone made a comment via Facebook comment plugin?

Facebook has no official solutions for get notifications other than checking out Facebook comment moderation tool. But as I browse web I was able to find a working solution to get comment notifications via email developed by a Facebook developer. It will help you to notify every comment via email whenever someone made comments on your blog via Facebook comment plugin. Also it's capable of sending notifications to your Facebook email address if you wish to. So it will save lot of time and you don't need to keep eye on Facebook comment moderation tool for new comments made on your blog. Interested? Let's find out how to set up notifications for Facebook comments.

Before You Go:

* You should specify Facebook JavaScript SDK and Open Graph Protocol, in order to wok this out.

* Make sure you have a file hosting site like Google Sites to upload and access few files we gonna need for this process.

Steps:

1. Go to Blogger Dashboard.

2. Click on your Blog Title.

3. Navigate to Template tab.

Note: Before editing your template, you may want to save a copy of it.

4. Click on Edit HTML button.

5. Tick on, Expand Widget Templates option.

6. Now search for <fb:comments which is Facebook Comment plugin code.

7. Add attribute class='fbcomments' and expr:title='data:post.title' to your Facebook Comment plugin code.

i.e: <fb:comments class='fbcomments' expr:title='data:post.title' expr:href='data:post.url' num_posts='2' width='500'/>

8. Now add below code snippets just after <head> in your template.

<script src='http://code.jquery.com/jquery-latest.min.js' type='text/javascript'/>
<script src='[URL of fbCommentsEN.js]' type='text/javascript'/>

Note: If you are using migrated Facebook Comment plugin which use migrated='1' attribute, use following code snippets instead of above.

<script src='http://code.jquery.com/jquery-latest.min.js' type='text/javascript'/>
<script src='[URL of fbCommentsEN-migrated.js]' type='text/javascript'/>

Color Indication Information

- URL of fbCommentsEN.js

Download fbCommentsEN.js and upload it on your server. Add the path/URL of the file here.

- URL of fbCommentsEN-migrated.js

Download fbCommentsEN-migrated.js and upload it on your own server. Then add the path/URL of the file here.

9. Now add following code snippet into JavaScript SDK, just after FB.init() method but just before }; - i.e: FB.init ({....}); [Add Code Snippet Here] };

var fromMail = 'info@blogspot.com';

var toMail = 'you@mail.com';

var sendPath = '[URL of fbCommentsEN.php]';

fbCommentsEN(fromMail,toMail,sendPath);

Color Indication Information

- Your Blog Email

This is the mail address which states as the sender mail address in the mail you will be received. You can specify it as you prefer such as info@blogspot.com or whatever.

- Email Recipient

This is email recipient address which is your email for notifications to be received. Facebook allowed you to add any email address including the @facebook.com, new Facebook mailing system. You can add multiple recipients too.

i.e: var toMail = 'you@gmail.com, friend@facebook.com, member@yahoo.com';

- URL of fbCommentsEN.php

Download fbCommentsEN.php and upload it on a server where supports PHP files.

Note: In case of you are not receiving emails, download fbCommentsEN_nc.php and upload it on your server. Then set new path here. This is PHP file which configured with no spam check.

i.e: var sendPath = 'http://MySite.com/fbCommentsEN_nc.php';

Credits: This has been implemented by Gil Goldshlager, a Developer of Facebook and credits should goes to.

How to Personalize Your Pages using Open Graph Protocol

2013-03-25T06:19:00.003+06:00

The Open Graph protocol enable developers to integrate their web pages in social graph. It is created by Facebook and let you add structured information about your pages to represent it as an entity on the web. Also it acts as a source for modern search engines to dig more information about your web pages too. If you mind adding Facebook social plugins, then these meta tags supports your plugins in fetching information to use them in snippets. Would you like to personalize your pages and customize the way Facebook social plugins share information of your pages?

In addition to customizing information used by Facebook social plugins, it allows you to administer Facebook plugins implemented on your site. For example, if you have Facebook comment plugin implemented on your site, the comment moderation will be allowed only for admins. The Open Graph tags let you define the administrator of your site. If you list yourself as an Admin using admins open graph meta tag, whenever you signed into your Facebook account, the comment box allows you to moderate comments on your pages.

Note: If you restricted your site from public, the Open Graph tags might not be crawlable. So you will find no changes in snippets, no comment moderation available or missing information when sharing, though you have specified information using Open Graph meta tags.

Before You Go:

To implement Open Graph meta tags, you need an Application ID to use with. Read How to Create a Facebook Application for Your Site.

Steps:

1. Search for </head> in your page template.

2. Now add following Open Graph meta tags right before </head> tag, after filling your required information. You should add these tags for each of your website pages.

Note: You should add Required meta tags. Optional meta tags can be added as your preference. For more extra tags visit The Open Graph protocol site.

Required

<meta content='Your Page Type' property='og:type'/>

<meta content='Your Facebook User ID' property='fb:admins'/>

<meta content='Your Blog Name' property='og:site_name'/>

<meta content='Your Application ID' property='fb:app_id'/>

Optional

<meta content='Page/Post Title' property='og:title'/>

<meta content='Page Description' property='og:description'/>

<meta content='URL of Page/Post' property='og:url'/>

<meta content='Image URL' property='og:image'/>

Color Indication Information

- Your Page Type

Specify the type of your page here. It depends on the content or type your page. You can find available types here - Open Graph Object Types.

Generally to represent an entire blog or website, you should add below relevant tag to your homepage.

Blog

<meta content='blog' property='og:type'/>

Website

<meta content='website' property='og:type'/>

Now you homepage is done. If you have transient content on other pages (article, blog posts, audio, video), you should specify below tag for each page.

<meta content='article' property='og:type'/>

Note: If you are a Blogger user, as you can't edit pages individually. Therefore, just add this code snippet to your template.

<b:if cond='data:blog.pageType == "index"'>
<meta content='blog' property='og:type'/>
<b:else/>
<meta content='article' property='og:type'/>
</b:if>

- Your Facebook User ID

Add your Facebook User ID here. This will add Facebook admin privileges for your site.

Note: If you don't know your user id, you can find your Facebook User ID by appending your Facebook username to below URL. If you don't know your Facebook username, you can find your username from http://www.facebook.com/username.

http://graph.facebook.com/[Your Facebook Username]

i.e: http://graph.facebook.com/24Solutionbd

If you don't have a Facebook username, claim one. Read How to Claim a Username in Facebook.

- Your Website or Blog Title

Specify your website or blog title here.

- Your Application ID

Application ID of your Facebook application created for your site. You can find your Facebook Application ID aka API key on Facebook Applications page correspond to your application.

- Page Title

Specify your page title here. It is considered as optional because Facebook will crawl for your page title automatically via title meta tag specified on your page. If you can edit your pages individually and would like to specify this tag, you can add this one.

Note: If you are a Blogger user, don't specify this tag in your blog.

- Page Description

This is your page description aka snippet of your page. It can use to describe your page and content briefly. However if you have description meta tag implemented in your page, Facebook will use it too. So this meta tag is not compulsory. But if you prefer, you can specify it for each of your pages.

Note: If you are a Blogger user, you can't specify description for each page. Therefore you can't make use of this tag. But if you prefer you can specify it only for your homepage to display description of your blog.

<b:if cond='data:blog.pageType == "index"'>
<meta content='Blog Description' property='og:description'/>
</b:if>

- URL of Page/Post

Specify the URL of Page here. However it's not compulsory 'cause Facebook will detect your current page URL automatically.

Note: If you are a Blogger user, you don't need to specify this tag in your blog.

- Post Image URL

Specify an URL of image to represent your page here. It will mostly the main image of your page. So when users share your page on their Facebook profile, this image will be added with the post. If you didn't specify this tag, plugin will automatically extract an image from current page.

Note: If you are a Blogger user, you don't need to specify this tag as Facebook will use your post image whenever share your post on Facebook. But usually your homepage could have mix of images. Therefore, if you prefer you can specify your site logo only for homepage, so whenever someone share your blog, it will appear with it.

<b:if cond='data:blog.pageType == "index"'>
<meta content='Image URL' property='og:image'/>
</b:if>

More Information:

* After adding Open Graph meta tags, you can use Facebook Debugger to see how Facebook treat your pages when Facebook crawl your pages.

How to Claim a Username in Facebook

2013-03-25T06:15:00.001+06:00

Do you administering a Facebook fan page for your brand or business? Mmm... may be not. But at least you may have a Facebook profile. Isn't it? How do you direct your friends to your profile? Finding them and sending requests? Yeah it works. Also when it comes to Facebook pages, you can invite your friends too. Most probably you may send your profile URL to your friends and family if you can't find them on Facebook too. But unless you can't copy and paste URL, how can you let them know what is exact profile or page of yours? In that scenario, wouldn't it better if profile or page URL can be easy to remember?

It's always better to have some sort of name to identify someone, isn't it? It applies on web or social profiles too. Therefore, Facebook has a feature for you to select preferred and unique username for your profile and page. Once you selected a username for your profile or page, it will be started to appear in the profile or page URL instead of set of numerical characters that hard to remember. By having a username, you can easily remember your profile URL and also you can share with friends eventhough you have no access to your Facebook account. A unique identity or brand name is always matters for businesses. As Facebook username makes it easier for your friends to find you on Facebook, also having a username for Facebook page make it easier for you to promote your Facebook fan page and fans can easily access your brand page too.

Before You Go:

* In order to claim a Facebook username, as a prerequisite, you need to verify your Facebook account.

Steps:

1. Sign in to your Facebook account.

2. Navigate to Facebook Username page.

3. As you have no username for your profile, Facebook will offer you relevant username suggestions for your personal profile according to your display name. But if you are not happy with them, you can enter your own username. However if you are looking for claiming username for your fan page, select your particular fan page from Page Name drop down box and enter desired username for your page.

4. Now click Check Availability button.

5. If your entered username is available, you will prompt to confirm it. Click Confirm button on the pop up. Else try another username.

Note: You can change your username only once after setting it up for your profile or page.

How to Delete Your Facebook Fan Page

2013-03-25T05:55:00.000+06:00

You may have created a Facebook fan page to promote your businesses and brands. Facebook can act as a vital role to bring out more customers and followers. Yet it's an effective and reliable solution to meet up your customers and followers easily to get feedback too. I presume most probably you may administering a Facebook fan page and looking forward to get rid of it. isn't it? There could be several reasons such as further you don't wanna manage and proceed with your Facebook fan page, having a duplicate page, mistakenly selected a wrong username for your page and can't change anymore. So if you are already made up your mind to delete your page, do you know how to?

Actually why you wanna delete your current fan page? For me, I had to delete my previous one because I had to re-considerate my Facebook page's username. That's a critical step and Facebook allows you to do one mistake in selecting your username. After then you won't be able to change it again. Further you may have your own reasons to get rid of your fan page. However after confirming the deletion, Facebook won't delete your page permanently and allows you 2 weeks to restore it back in case if you wanna change your mind. Let's figure out how to deal with deleting your Facebook fan page.

Before You Go

Steps:

1. Sign in to your Facebook account.

2. Navigate to your Facebook fan page.

3. Find Admin Panel on top.

4. Click on Edit Page on drop down menu.

5. Click on Manage Permissions.

6. Click on Delete [Your Page Name] link next to Delete Page setting.

7. Now click Delete Page button on the dialog box.

Note: Facebook will delete your page right after clicking Delete button and you won't be able to get it back.

Add Facebook Subscribe Button on Your Website

2013-03-25T05:49:00.002+06:00

How do you engage with people in Facebook? For your friends and family, you would notify about their conversations and updates all the time and vice versa. So they can engage with your conversations in no time on Facebook. But what about your followers of fans? Yeah obviously you have created a Facebook fan page for them nah? But still others may like to see what you have been talking. They may find interesting to engage with your conversations too. Would you like to broaden your conversations with people whom interested in you?

Lately Facebook introduced another useful feature for everyone - Subscriptions. Subscriptions will let other users to see your public updates shared on your Facebook profile. It will help them to see your updates and conversations on their news feed and they will be able to engage with your conversations too. So people who are interested in you may find this feature much useful for them and you can share your updates beyond your friends. With that feature, now Facebook offers Subscribe plugin which allows users to subscribe to your profile from your site. Isn't that nice? Let's create a subscribe button for you and add it to your site.

Before You Go:

* You need to enable subscriptions for your profile before you implement this subscribe plugin. If you are not enabled subscriptions on your profile, allow subscriptions from your subscription tab.

* Unless if you implemented Facebook JavaScript SDK in your site, you have to add it before you proceed with steps. Read How to Implement Facebook JavaScript SDK on Your Website and implement suitable JavaScript SDK version for you.

Steps:

You just need to implement Facebook subscribe button at the place where you want it to appear. Mostly it may your author/about me page or near the contributor's name. You can either use XFBML or HTML5 markups.

Notes:

* If you are a Blogger user, add your plugin code snippet via HTML/JavaScript element. Read How to Add an External Widget or Codes to Blogger. Else if you wanna render it in a Blogger post or page, read How to Embed External Content on Your Blogger Posts or Pages.

* The XFBML markup of this plugin may not support earlier versions of Internet Explorer. In order to enhance compatibility with older Internet Explorer versions, add below XML namespace to your root HTML tag.

xmlns:fb="http://ogp.me/ns/fb#"

i.e: <html b:version='2' ..... xmlns:fb="http://ogp.me/ns/fb#">

Standard Layout Style

XFBML Markup

<fb:subscribe href="[URL of Your Profile]" width="[Width in Pixels]" show_faces="[Enable/Disable Showing Faces]" colorscheme="[Color Scheme of Plugin]" font="[Font Family]"></fb:recommendations>

HTML5 Markup

<div class="fb-subscribe" data-href="[URL of Your Profile]" data-show-faces="[Enable/Disable Showing Faces]" data-colorscheme="[Color Scheme of Plugin]" data-font="[Font Family]" data-width="[Width in Pixels]"></div>

Button Count Layout Style

XFBML Markup

<fb:subscribe href="[URL of Your Profile]" layout="button_count" width="[Width in Pixels]" show_faces="[Enable/Disable Showing Faces]" colorscheme="[Color Scheme of Plugin]" font="[Font Family]"></fb:recommendations>

HTML5 Markup

<div class="fb-subscribe" data-href="[URL of Your Profile]" data-layout="button_count" data-show-faces="[Enable/Disable Showing Faces]" data-colorscheme="[Color Scheme of Plugin]" data-font="[Font Family]" data-width="[Width in Pixels]"></div>

Box Count Layout Style

XFBML Markup

<fb:subscribe href="[URL of Your Profile]" layout="box_count" width="[Width in Pixels]" show_faces="[Enable/Disable Showing Faces]" colorscheme="[Color Scheme of Plugin]" font="[Font Family]"></fb:recommendations>

HTML5 Markup

<div class="fb-subscribe" data-href="[URL of Your Profile]" data-layout="box_count" data-show-faces="[Enable/Disable Showing Faces]" data-colorscheme="[Color Scheme of Plugin]" data-font="[Font Family]" data-width="[Width in Pixels]"></div>

Color Indication Information

- URL of Your Facebook Profile

This is the URL of your Facebook profile.

i.e: https://www.facebook.com/Sunnyhowlader

- Width of Subscribe Plugin

Specify the width of your subscribe plugin here in pixels.

- Enable/Disable Showing Faces of Subscribers

If you wish to show faces of subscribers underneath the button, then assign true here. Else use false here.

- Color Scheme of Plugin

Either you can specify dark for dark color scheme, or light for default color scheme.

- Font Family

You can specify the font family to be used in Subscribe plugin. You can leave it blank if you wish it to use default font family.