Paper N Pearlz

Origami Swan Sonobe - Icosahedron

2021-04-19T14:07:00.019-07:00

My final sonobe variation for now, from the book "Marvelous Modular Origami" by Meenakshi Mukerji is the Origami Swan Sonobe, assembled into an icosahedron and made from 30 modules.

The icosahedron assembly is another that I love making. And in this icosahedron, you can see the swan pattern visible in each of the face.

Recently, Meenakshi Mukerji, in her Instagram account, had announced a giveaway. Check out the post to find out details of the giveaway. The idea is folding as many of her models as possible, so that gives me added motivation to fold her models!! Though I think I am done folding the sonobes for now. Anyway, do participate if possible and take part in the giveaway :)

Model Details:

Model: Swan Sonobe - Icosahedron

Creator: Meenakshi Mukerji

Book: Marvelous Modular Origami

Author: Meenakshi Mukerji

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~3 inches across

Modules: 30

Origami Striped Sonobe - Octahedron

2021-04-09T21:52:00.006-07:00

The third of the models that I tried was the Origami Striped Sonobe, assembled into an Octahedron, from 12 modules. The assembly is, of course, different from the Large Cube assembly from my last post.

The Octahedron is formed from pyramids, in rings of 4 pyramids. I love this assembly - it is easy but at the same time, looks quite complex. And the striped sonobe modules give it a nice touch.

The colour combination is the same as my previous models - deep blue, light blue and yellow. The size remains the same - 3-inch squares. The resulting octahedron is about 3.5 cms (~1.4 inches). It fits nicely into the palm of my hand! A super-cute model :)

Model Details:

Model: Striped Sonobe - Octahedron

Creator: Meenakshi Mukerji

Book: Marvelous Modular Origami

Author: Meenakshi Mukerji

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~1.4 inches side

Modules: 12

Origami Snow-capped Sonobe - Large Cube

2021-04-03T10:48:00.003-07:00

Continuing my theme from my last post, I folded the Snow-Capped Sonobe this time. The assembly is in a large cube, made from 12 units. This is the first Snow-capped sonobe. There is a second one too, but that required folding thirds at one point, so I gave that a miss!!

I have previously folded this model, but had assembled it into an octahedron. But this time, since I am trying to go as sequentially as possible, I assembled the large cube. By the way, this is the third model in the book, the second one being the Striped Sonobe.

This is also folded from 3-inch squares. While the large cube is larger than the cube, it really isn't that much bigger! Each side measures ~1.1 inch - not much different from 0.8 inch, is it??

Model Details:

Model: Snow-capped Sonobe - Large Cube

Creator: Meenakshi Mukerji

Book: Marvelous Modular Origami

Author: Meenakshi Mukerji

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~1.1 inches side

Modules: 12

Origami Daisy Sonobe Cube

2021-03-25T10:10:00.002-07:00

After working on the Origami Hearty Cube by Meenakshi Mukerji, I decided to delve back into my other origami books by the same author and decided to try out some of her Sonobe Variations.

I love folding the Sonobe and am quite excited about folding some of the variations in the book "Marvelous Modular Origami". Check out my Poinsettia, one of the models that I had previously folded from this book.

So this time, I started with the very first model in the book, the Daisy Sonobe. This is folded from a square and is not too difficult to fold. Different assemblies are possible - the cube, large cube, octahedron, icosahedron and dodecahedron. While I love folding the octahedron and the icosahedron, I decided to start with the cube. The cube is, of course, folded from 6 units.

The assembly is pretty straight forward, It is easiest to assemble 4 in a straight line, then connect the end units and finally attach 2 units - 1 at the top and 1 at the bottom.

I have used 3-inch squares to fold and this resulted in a really small cube - about 2 cms side (~0.8 inches). So if folding a cube, a square of at least 5 inches is advisable.

I hope to try the other assemblies using the other variations in the book. Hopefully soon!

Model Details:

Model: Daisy Sonobe Cube

Creator: Meenakshi Mukerji

Book: Marvelous Modular Origami

Author: Meenakshi Mukerji

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~0.8 inches side

Modules: 6

Origami Hearty Cube - Meenakshi Mukerji

2021-03-16T06:54:00.003-07:00

Well, it's been a month since Valentine's Day and I finally did Meenakshmi Mukerji's Hearty cube!! 😅😅 I have procrastinated quite I know, but unfortunately work has been taking it's toll 😒

The cube, that has a heart on each side, is made from 6 modules. Each module is folded from half a square - a rectangle of ratio 1:2. So the easiest way to do it is to cut 3 squares into 6 modules.

Origami paper with different colours work best, as that would mean the hearts would stand out. Instead of the traditional red, I decided to go with a light yellow origami paper, with little flowers on one side. Am quite pleased with the way this has turned out 💛

It is a simple modular origami and would be a great model to try out for beginner origamists.

Model Details:

Model: Hearty Cube

Creator: Meenakshi Mukerji

Book: Exquisite Modular Origami II

Author: Meenakshi Mukerji

Difficulty Level: Low Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 6 inches * 3 inches

Model Size: ~ 1.5 inches in height

Tutorial: Instagram

Number of Modules: 6

Recycled Newspaper Small Trinket Pot

2021-03-04T10:44:00.002-08:00

So, I am continuing my projects from the past couple of months - making paper woven products in which the original paper print is visible. This was a bigger box than what I have previously done - about 7 inches tall and 5 inches in diameter.

Nothing much else to say! Not sure what I think of this one.. It is very practical, because it is quite big. But I need to shape it a little better I think!

Recycled newspaper - woven box in red and white with decoupage

2021-02-25T21:15:00.010-08:00

A good experience - a woven box in red and white, made from recycled newspaper! I love using a combination of red and white, this is one of my favourite colour duo and looks bright and lively ❤

This box was woven using the same design as my previous one, except for a change in colours. And of course, the decoupage paper that I used was also different.

The box is fairly big - 8 inches in diameter and 10 inches in height - and has a cardboard base. I think that adds strength to the box. Like in my previous box, I have used 2 types of weaving. The bottom one ensures the bright red stands out and the top white is the best background for the decoupage.

The lid is made on the same lines as the base. Absolutely adore the little woven knob. The rest of the weaving was the regular, 2-strand weaves.

So, how do you like it??

Newspaper weaving - Desk Tidy

2021-02-18T09:25:00.003-08:00

After the pen pot from my previous post, I worked on another of the paper woven products - this time using a mix of painted and original newspaper tubes. I must say I am quite happy with the way this one turned out.

This was a desk tidy, about 4 inches in diameter and about 5-inches in height. I made a pair of them, in contrasting colour combination.

I love how nice and sturdy this desk tidy is! And I love that the print is visible! But the best of this is the combination of colour and original!

So, what do you think?? Would you like to have one of these desk tidies on your desk??

Happy Valentine's Day - Origami Garland of hearts

2021-02-13T22:32:00.033-08:00

Happy Valentine's Day!

Well, this year for Valentine's, I decided to fold a long-pending model that has been on my to-do list for the past 3-4 years. Every year I miss Valentine's Day and decide to fold the model the next year. Finally, this year, I actually remembered to give this model a go.

This is an origami wreath, designed by the amazing Francesco Guarnieri! I love folding wreaths - they are modular origami and I absolutely adore modular origami and they are quick to fold, given that they usually require 8 modules (as opposed to the usual 30-unit modulars that I fold). So this origami Garland of hearts (Ghirlanda di cuori) fit the bill very nicely.

I used double-sided, red-pink 60 gsm origami paper, which turned out perfect for this model. 7.5 cms (3 inches) squares resulted in a wreath that measured about 12.5 cms (~ 5 inches) in diameter.

Folding the individual modules started off easily enough. The last couple of steps, where the 3-D heart is folded, was a little tricky. Loved the way the heart locks into place! The join between the modules is easy and very stable - absolutely no glue required for this one! Overall, a lovely model to fold.

For this Valentine's Day, why don't you give this a go?

Model Details:

Model: Origami Garland of Hearts (Ghirlanda di Cuori)

Creator: Francesco Guarnieri

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inch square

Model Size: ~ 5 inches across

Modules: 8

Instructions: Origami poesie di carta

Newspaper Weaving - Pen / Pencil Pot

2021-01-28T23:02:00.003-08:00

So I have been experimenting with making some woven products using the original newspaper tubes, without colouring them.

This was the first of them - a pen or pencil pot. This time I tried both ways - one I made using only the newspaper tubes, no colour. The next was made from wood-coloured tubes. What do you think? Which is the one you prefer?

Personally, I prefer the original tubes with no colour. I like that the paper is seen and anyone seeing it would know that it is made from paper. But if I want to hide that it is actually paper-made, then the colouring one works out well.

Newspaper Weaving with decoupage - First work of 2021!

2021-01-15T19:07:00.006-08:00

Here's to a blessed new year 2021! Well, the year has had a good start for me and I was able to work on my first order for this year - a box made from newspaper tubes with a touch of decoupage.

I am very happy to see the results of all the practice I have had during these past few months! Quite delighted with how pleasing and utilitarian this box turned out to be!

The box is 8 inches in diameter and 10 inches in height. In this instance too, the client just specified that she wanted a big box with decoupage. So that meant, I got to choose the colours and the design!! Yay!!

I went for the peach/white combination from my last box as I absolutely love this decoupage tissue. I love how pleasing these roses are! The base was made from a cardboard and I started by gluing the sticks to the base.

I used 2 patterns for the sides. The first was a 3-weave pattern as I wanted to accentuate the white. This was followed by a peach section, since I wanted the decoupage to stand out here.

The lid also started with a cardboard base with decoupage on it. Quite happy with the way the decoupage turned out! In love with these little woven knobs! They are so adorable!!

Finally, I finished off with some round felt protectors, since the colour is quite light and I didn't want the box to turn dirty very quickly!

So, here's to a year of newspaper weaving and plenty of orders 😄😄

Happy New Year 2021!

Origami Rain Star

2021-01-12T08:39:00.053-08:00

A little origami modular to start the New Year 2021! Happy new year!

This nice little modular, called Origami Rain Star is designed by Aldo Marcell. I have folded a couple of his models before - the Origami Tornado and the Origami Cyclon. And so I was quite excited and scared of folding this one! The Origami Cyclon was really a difficult one to fold! But this turned out to be a joy to fold and assemble and very economical to boot!

This model is folded from a rectangle 1:3 in ratio. So I used double sided origami paper, 7.5 cms in size. I divided the paper into 3, so the pieces I ended up with were 2.5 cms by 7.5 cms. The individual modules were quite easy to fold. And the assembly was also surprisingly easy!

What surprised me the most about this model was the size of the finished model. 1-inch by 3-inch rectangles, I expected a small model. Turns out this model was quite different! The final model measured approximately 4 inches in diameter.

Double-sided paper works best and I love the way those little stars show up when the modules are assembled. 75 gsm origami paper works best for sizes that I usually fold.

Model Details:

Model: Rain Star

Creator: Aldo Marcell

Difficulty Level: Low Intermediate

Paper Ratio: 1:3

Paper Size: 1 inch by 3 inches

Model Size: ~4 inches in diameter

Modules: 30

Instructions: Stranamasterov.ru

Tutorial: Youtube

Merry Christmas 2020!

2020-12-24T12:56:00.004-08:00

Merry Christmas, dear readers! Hope this season brings you much joy and peace, despite the problems that still persist with the virus!

Here are my latest favourite projects - Leaf trays made from newspaper tubes, using red and green tubes to add a little Christmas vibe to it!

And check out these pretty Christmas baubles - yet another eco-friendly project. Though not by me! This is done by a group called PeopleKraft. Do check out their Insta page for more of their work. These baubles are made from scrap fabric, left over from various other projects. I thought it was an innovative way of reusing such material and so, ordered a couple of these baubles for my Christmas tree!

Once again, a Merry Christmas!

Newspaper Weaving - Christmas Leaf Tray

2020-12-17T21:30:00.009-08:00

Its that time of the year! A time of joy and cheer! And on my blog, this is the time to create some Christmas themed newspaper weaving crafts! So this year, I decided to go ahead and redo the leaf tray from my previous post! Using Christmas colours of red and green - naturally!

And let me say, I am absolutely delighted with the way this tray has turned out! I used random red/green tubes, and I love the effect produced by this random mix. The handle was also attached differently. I like this method better.

Overall, a nice bit of work to end this year!

Model Details:

Model: Leaf Tray

Difficulty Level: Complex

Tutorial (making newspaper tubes): Youtube

Newspaper Weaving - Leaf Tray

2020-12-07T12:02:00.013-08:00

A little experiment for making a small, leaf-shaped tray, in time for Christmas! This little tray has been on my to-do list for quite some time now, especially since I have already made a couple of leaf trays using the coiling technique of weaving.

Since I had already coloured some tubes green and red, in anticipation of some Christmas themed newspaper weaving projects, I decided to use a few of them to try out this little leaf tray. Well, it turned out not to so little after all - measuring around 10-inches at the maximum length!

While I quite liked the leaf stalk that I added, I think I need to figure out a better way, or rather, a more aesthetically pleasing way of adding it!

Other than that, I am in love with this tray and I think I will do one more using Christmas colours! What say??

Model Details:

Model: Leaf Tray

Difficulty Level: Complex

Tutorial (making newspaper tubes): Youtube

Newspaper Weaving - Big box in peach + decoupage

2020-11-18T22:27:00.004-08:00

This time of coronavirus has meant that I have received very few orders for my newspaper weaves during this year. But well, there is always a silver lining - I was able to work on my weaves, experiment with colours, try out new weaving techniques...

Let me assure you, trying to achieve a certain level of mastery in anything is difficult. While perfection is impossible to achieve - practice definitely does not make perfect, but it sure does make one better - striving towards that perfection, for me, is key to success. As far as my weaving goes, this means a lot of hours, plenty of effort and boat loads of experiments!

So time of quarantine has been that opportunity for me to better my work. I have done a ton of reading (a lot of sites in other languages, so thank you, Google Translate!!), a whole bunch of research, hours of video-watching, many, many experiments with colours, techniques, designs and rolling so many newspaper tubes that I can probably do it blind-folded now!

And the result? Now I can say that my work has definitely improved. In the next few months I will be able to show that on my blog too. And hopefully, I would love to share some of my learning and if you are interested in paper weaving, I am sure that would benefit you.

Coming to this big box - this is one of the biggest projects I have had the pleasure to work on. The client wanted something to store toys in, something in pleasing pastel colours and something with a lid. She also wanted decoupage. That was all the requirements. And what a pleasure it has been!

I worked based on the patterns on the decoupage tissue - roses in pale peach. So my chosen colours were peach and white. This project involved a loooot of tube-rolling!! 😅😅 I started with a cardboard base, with decoupage done on that cardboard. The weaving was pretty straight-forward - the lower half was an experiment in random combinations of peach and white and the upper half was completely done in white. I absolutely loved the lid, with its little peach knob! Initially I had thought of adding a wooden know, but am quite happy I went with this paper knob instead.

Decoupage is quite interesting, but I think this will also take a back seat to the actual weaving. I love the way it accentuates the beauty of the box though.

Overall, a wonderful project and a pleased client 👍😀

Newspaper Weaving - Box

2020-11-03T23:18:00.005-08:00

After the lovely origami that I folded last month, I decided that I wanted to do something in newspaper weaving that is a little big - big enough to contain a fair amount of stuff, rather than the usual, small pieces that I do.

So that is what I did! This box, made of olive green and corn yellow, is the first of these boxes that I decided to weave. The idea was derived from some decoupage tissue, presented to me by my daughter, Little Miss. I am not sure decoupage will look good on small, woven works. Anyway, I have to try it out! But for now, this is what I did.

The base of the box was cardboard, since I wasn't too keen on weaving such a big bottom! The box measures 8 inches in diameter and the cardboard is 6 inches in diameter. From that, I started my weaving.

Once I started weaving the sides, I wanted to try out some new techniques of weaving. Unfortunately, I don't know of the names! But I guess the pictures provide enough information! 😆

Once the weaving was done, it was decoupage time. Frankly speaking, I am not too happy with the way this decoupage turned out! I think the bees and the flowers merge a little too much with the weaving! But, all is not lost! I will try this same technique again with a different decoupage paper and hopefully that will come out well!

Model Details:

Model: Leaf Tray

Difficulty Level: Complex

Tutorial (making newspaper tubes): Youtube

Newspaper Weaving - Pumpkin Pot

2020-10-26T12:48:00.002-07:00

Hmm.. My attempt at making a little woven pumpkin pot! Is that a yay or a nay??

Can't say I am very impressed with this 😁 I think the top of the pumpkin should flatten down a lot more. Don't you think so? And I think the lid should be entirely of orange with no green in it. Well, live and learn, folks!!

Model Details:

Model: Pumpkin Pot

Difficulty Level: Complex

Tutorial (making newspaper tubes): Youtube

Origami Dragon

2020-10-20T04:39:00.053-07:00

After folding the long-pending origami whale in my last post, I worked on another of my pending origami - this one is Armin Täubner's origami dragon.

This very cute dragon (cute and dragon in the same sentence?? Talk about an oxymoron! 😆😅) is folded from a 15-cm square and will take about 20 minutes to complete! It starts with a fish base and builds up on that. The final shaping adds a lot of beauty to this model and I am quite delighted with the way it has turned out!

Model Details:

Model: Dragon

Creator: Armin Täubner

Book: Kreativ Workshop Origami

Author: Armin Täubner

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 6 inch square

Model Size: ~ 4 inches across

Tutorial: Youtube

Origami Whale

2020-10-15T04:00:00.050-07:00

The idea of the "Inktober" art challenge is to improve drawing skills. One of the groups I am a part of (Artrangi United) has taken up this challenge. The participants are provided with a list of prompts - 1 per day for the month of October and are challenged to draw based on the prompt.

Frankly speaking, I am very bad at drawing/painting etc! So what am I doing with this challenge?? Today's theme was "whale"! And there is this Robert Lang's whale that I have been thinking of folding for a long time now. So, I decided to take up the prompt for the Inktober challenge and finally, finally folding this long pending origami!

The folding is fairly simple. Using black single-sided paper (15 cms in my case) gave me a nice little killer whale. You might be wondering why I have added all these bells and whistles in the pic?? 😆 That is because the Artrangis have been asked to post there creations on Instagram. And in case you have an Instagram account and wish to follow me, please do so! I would be delighted to have some followers!!

Model Details:

Model: Whale

Creator: Robert Lang

Book: Origami Under the Sea

Author: John Montroll & Robert Lang

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 6 inch square

Model Size: ~4 inches in length

Tutorial: Youtube

Origami Hummingbird

2020-07-30T10:24:00.038-07:00

Origamists around the world seem to be putting the quarantine to good use! Instagram and Facebook are rife with origami enthusiasts teaching various models, origami conventions are being organized online and in general, a lot of people are putting their time to good use.

Once such origami demonstration I happened upon was in Instagram. The author of the model, Fabian Correa was interviewed online and then he demonstrated to the host and to the viewers, how to fold this really cute hummingbird. The entire session was in Spanish, so I did not understand anything that was spoken, but origami is a universal language and the folding was something I understood quite well. It was well demonstrated and folding along wasn't a hardship.

I used 6 inch origami single-sided paper. The final shaping took some time, but otherwise it was a good, fun origami to fold.

Model Details:

Model: Hummingbird

Creator: Fabian Correa

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 6 inches

Model Size: ~2 inches across

Link to demonstration: Instagram

Origami Project - Mette Rings - The conclusion

2020-07-08T13:46:00.001-07:00

My mega Mette Ring project is finally completed! Whew!! After working on and off for nearly a year, I finally completed it!

And I am absolutely thrilled by how well it has come through. I had made a total of 20 rings which were linked together to form a slinky. Finally inserted the last module into the first, forming a ring of ring of Mette rings.

Absolutely love the colours that were chosen by Little Miss. Apparently, I am incapable of even choosing the rainbow colours for these rings 😄😄 But as always, she chose impeccably, the perfect colours that show a good gradation of colour.

While this has been a tiring bit of work, I think the final outcome would give anyone, absolute satisfaction! But not to be forgotten, there are 360 modules to be folded. Which makes this the biggest origami work that I have ever attempted!!

Model Details:

Model: Mette's Ring

Creator: Mette Pederson

Book: Mette Units

Author: Mette Pederson

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Diagram: Mette Units

Modules: 18

Newspaper Weaving - Magazine Rack

2020-07-07T13:31:00.000-07:00

The first order for a magazine rack came through during the covid lockdown. So I decided to hunker down and start working on the rack during the end of June. The client gave me the option of choosing my own colours, so decided to go with a combination of dark and light brown. The light brown was after consultation with Little Miss 😄And I must say I am quite happy with the result.

The base of the rack is made of plywood, and I had drilled holes through the wood. Then it was just a matter of decoupaging paper onto the base, so that the plywood is not visible. The wood base ensured that the magazine rack would be sturdy even if a number of books are placed in it.

I liked the pattern in the lower half of the rack. Would have loved to continue in the top bit too, but I guess that would not have looked that great in the middle. So there, it was a regular weave with 2 tubes of paper.

I must say my weaving skills have improved quite a bit and am quite pleased with the way the magazine holder has turned out. Obviously, there are a few mistakes, but nothing glaringly obvious. And I am sure I would get better with a little more practise. What say?

Overall, this has been a fun bit of work and I am truly grateful that the client trusted me with the whole project. I am also supposed to make a pen holder and a tissue holder that goes along with the rack. I will soon get cracking on that!

New Year's Day Origami Star

2020-06-30T13:22:00.000-07:00

Paolo Bascetta's stellated dodecahedron, also known as the Bascetta Star is, I think, the most well-known of Bascetta's creations. I also love this Compass Rose folded quite some time back.

During these coronavirus times, I tried out yet another of his modulars - a modular 2D star, called the New Year's Day Star. While folding it, I was wondering if it was possible to restart this year, minus the pandemic!

Coming back to the modular, it is folded from 18 modules and is similar to the Mette Ring. In the mette ring, the final step is folding the module into 2. This step is not included in the New Year's star. Instead, the unfolded modules are slipped into the little pockets to form the star. Though I assembled it with glue, it can be done without glue. I used 2 inch squares and 2 colours, in the classic black and white combination. And I quite like the way it has turned out.

Model Details:

Model: New Year's Day Star

Creator: Paolo Bascetta

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 2 inches

Model Size: ~ 4 inches across

Number of Modules: 18

Tutorial: Youtube

Diagram: Free Download

Newspaper Weaving - Triangular Pen Stand

2020-06-17T04:53:00.000-07:00

Continuing with the project from my last post, I worked on a pen stand, using the same colour combination - dark purple, mauve and cream. It was again done using the coiling technique, using newspaper tubes.

Weaving the tray was easier because of the larger surface area. And another problem was maintaining evenness in the sides of the pen stand. I haven't completely succeeded in this regard!

The close up shows the colours and the smooth weave. And once I glazed it, I ended up with an incredibly strong pen stand! I just hope my brother likes it and finds it useful :)

And finally, here is a picture of the pen stand and the tray. I am quite pleased with how they have both turned out, but I think I will take a break from weaving using the coiling technique! It is quite time-consuming and frankly speaking, very addicting 😅😅

Model Details:

Model: Triangular Pen Stand

Difficulty Level: Complex

Tutorial (making newspaper tubes): Youtube

Tutorial (coiling or root-weaving technique): Youtube