Vintages Cars

Lotus Elite, 1973

2011-07-15T05:40:00.000-07:00

Lotus Elite, 1973

Lotus' first saloon car was front engined with rear wheel drive. Like all production Lotuses since the Elan, the Elite II used fiberglass for the hatchback bodyshell, mounted on a steel backbone chassis evolved from the Elan and Europa. It had 4-wheel independent suspension using coil springs. Power steering and air conditioning were optional from 1974. The Elite II was the basis for the Eclat, and the later Excel four-seaters.

The Elite II was Lotus' first car to use the "907" aluminium-block 4-valve, DOHC, four cylinder, 2.0 L engine. (The 907 engine had previously been used in Jensen-Healeys.) The 907 engine ultimately became the foundation for the Lotus Esprit powerplants, both naturally-aspirated and turbocharged. Elite IIs were available with a 5-speed gearbox standard; from January 1976 an automatic transmission was optional.

The Elite and Elite II (and the related Eclat) are notable in that the stock curb weight is not much over 2000 lb (907 kg). Once the motors reach their power band, both acceleration and handling are impressive.

BMW 503 Cabriolet, 1956

2011-07-11T00:01:00.000-07:00

BMW 503 Cabriolet, 1956

BMW 503 Cabriolet, 1956

Aston Martin DBR1, 1959

2011-07-04T06:59:00.000-07:00

Aston Martin DBR1, 1959

Aston Martin DBR1, 1959

VW Golf I, 1974

2011-06-30T03:37:00.000-07:00

VW Golf I, 1974

The first Golf began production in 1974. Marketed in the United States and Canada from 1975 to 1984 as the Volkswagen Rabbit and in Latin America as the Volkswagen Caribe, it featured the water-cooled, front wheel drive design pioneered by the Citroën Traction Avant in 1934 with the addition of a hatchback pioneered by the Renault 4 in 1961. The Golf was Wheels magazine's Car of the Year for 1975. The name is short for Golf-Strom, German for Gulf Stream; it was named for that oceanic current to reflect its international character. It was originally named the Rabbit in North America and the Caribe in Latin America, ironically, because marketers decided that no one in the Western Hemisphere would understand the European name.

While the Golf was not the first design with this layout (earlier examples being the Austin and Morris Mini of 1959, the Austin Maxi in the late 1960s and the Fiat 128 3P of the early 1970s), it was very successful, especially since it married these features with Volkswagen's reputation for solid build-quality and reliable engineering.

The Golf was designed by Italian automobile architect / designer Giorgetto Giugiaro, of the ItalDesign design studio. A version of this original Golf model, known as the Volkswagen CitiGolf, is still produced in South Africa as an entry level car.

In 1978, Volkswagen commenced producing the Rabbit version of the Mk1 Golf in Westmoreland County, Pennsylvania, thus becoming the first European car manufacturer in modern times to produce a vehicle in the United States. Former Chevrolet executive James McLernon was chosen to run the factory, which was built to lower the cost of the Rabbit in North America by producing it locally. Unfortunately, McLernon tried to "Americanize" the Rabbit by softening the suspension and using cheaper materials for the interior. VW purists in America and company executives in Germany were displeased, and for the 1983 model year the Pennsylvania plant went back to using stiffer shocks and suspension with higher-quality interior trim. The plant also began producing the GTI for the North American market. (Rabbits were built in Pennsylvania through 1984.) The first VW Caddy pick-up, based on the Mk1 Golf, was also created at the Pennsylvania plant.

The GTI version, launched in Europe in 1976 and in the US in 1983, virtually created the hot hatch genre overnight, and many other manufacturers since have created special sports models of their regular volume selling small hatchbacks. It was one of the first small cars to adopt fuel injection for its sports version, which raised power output of the 1588 cc engine to 110 PS (81 kW/108 hp). In 2004, Sports Car International announced the GTI Mk I as the 3rd best car of the 1980s. In the United States, the Mk1 Golf GTI was known as the Rabbit GTI.

There was a minor facelift in 1980 for North American versions only, which saw the adoption of larger rear lamp clusters (more in line with Guigiaro's original concepts), larger bumpers, square headlights and a new dashboard with a more modern-looking instrument display.

The convertible version, named the Cabriolet, was sold from 1980 to 1993 (a convertible version of the Golf II was not made, so the Mk1 cabrio with slight modification was produced until the introduction of the Mk III cabrio). It had a reinforced body, transverse roll bar, and a high level of trim. The A1 Volkswagen convertible is of unibody construction built entirely at the factory of Karmann, from stamping to final assembly; Volkswagen supplied the engine, suspension, interior, etc. for Karmann to install. The vinyl tops were insulated and manually operated, with a glass rear window.

As of 2006, Volkswagen of South Africa still manufactures two first generation Golfs, the four-door "Citi" Golf and the "Pickup".

Scion tC Release Series 1.0, 2005

2011-06-28T07:31:00.000-07:00

Scion tC Release Series 1.0, 2005

The Scion tC is a sports compact automobile introduced by Toyota in 2004 as a concept vehicle under its recently introduced Scion brand name. The Scion tC was designed to appeal to the Generation Y market and get them locked into the Toyota brand before any other car manufacturer could have a chance. They hoped to do so by making standard features numerous and optional features extremely easy to add.

The Scion tC uses the chassis of the Avensis which is sold in the European market, and the Camry's 2.4 L 2AZ-FE I4 engine. Its low price (base MSRP of US$16,715 for the 2006 model) is a major feature, as well as the pure pricing marketing style that Toyota has adopted.

The name tC does not fit in with its stablemates the xA and xB because the name xC has already been taken by Volvo for its XC70 and XC90 models. According to Scion, tC stands for "Touring Coupe."

Specifications

* Engine: Double overhead cam (DOHC) 16-valve VVT-i 2.4 L 4-cylinder
* Power: 160hp (119 kW) @ 5700 rpm
* Torque: 163 ft·lbf (221 N·m) @ 4000 rpm
* Transmission: 5-speed manual or available 4-speed electronically controlled automatic transmission
* Highway fuel economy/consumption: 35-30 mi/U.S. gal (7.8 L/100 km) (automatic); 34-29 mi/U.S. gal (8.1 L/100 km) (manual)
* City fuel economy/consumption: 29-23 mi/U.S. gal (10.7 L/100 km) (automatic); 28-22 mi/U.S. gal (10.7 L/100 km) (manual)
* Fuel tank: 14.5 gal (54.9 L)
* Brakes: 4-wheel anti-lock braking system employing disc brakes on both the front and rear
* Curb weight: 2,970 lb (1,347 kg) (automatic); 2,905 lb (1,318 kg) (manual)
* Displacement: 2382 CC

Rinspeed Dodge Viper Veleno Concept, 1993

2011-06-26T06:21:00.000-07:00

Rinspeed Dodge Viper Veleno Concept, 1993

The base car, successor of the legendary classic of American "muscle-cars" named AC Cobra, is a Dodge Viper RT/10. This dream car of the nineties, so far built only in a very small volume of a few hundred units, was individually customized with many new components.

At first sight the unusual viper-green color distinguishes this car from others, especially as all originals came only in red. The strong effect underlines the aggressive lines of the body to its best. The front with its altered front skirt, the rear view mirrors on the windshield frame, the futuristically styled rear roll protection with the integrated rear lights and the modified rear end make the car even more desirable without distorting its original character.

The original one piece wheels were exchanged for three piece O.Z. wheels of the dimensions 10?x18" in front and 13?x18" in the rear. Enormous Pirelli P Zero tires (275/35-18 front and 335/30-18 rear) improve the handling and traction abilities.

New trends are set with the interior set-up. Instead of the traditional leather upholstery, the seats, door panels and the dashboard are covered with a new material called "Vinerus". "Vinerus" is a specially manufactured high-quality artificial material which is used by the well-known Maison Mollerus Inc (Zurich and Dusseldorf) for their collection of hand bags and traveling luggage. The advantage of this material is not only in its exclusive appearance but also in its weather fitness and sturdiness. It combines the elegant with the useful to a personal touch. The instrument panel and the center console are painted in the cars color to give it a high-tech look.

The revolutionary, integrated CD-changer by Alpine is controlled without distortion from driving by a touch of a button from the steering wheel.

The latest cellular phone from Nokia Mobiles phones, the model 121 with its feather weight of only 275 grams and its power of up to 6 watts (with a booster) being the lightest and most mobile unit in the world, solves all telecommunication problems.

The engine, with its ten cylinders and eight liters of volume being the biggest production unit in the world, is improved by a electronically controlled nitro-(NO2)-oxide-injection. The power output is thereby increased from 400 to 550 hp and the torque is raised to an incredible 820 Nm. The exhaust gases are routed through two catalytic converters to the side of the car.

Jaguar D-Type, 1954

2011-06-24T06:45:00.000-07:00

Jaguar D-Type, 1954

The Jaguar D-Type, like its predecessor the C-Type, was a factory-built race car. Although it shared the basic straight-6 XK engine design (initially 3.4L and eventually uprated to 3.8 litres in the late fifties) with the C-Type, the majority of the car was radically different. Perhaps its most ground-breaking innovation was the introduction of a monocoque chassis, which not only introduced aircraft-style engineering to competition car design, but also an aeronautical understanding of aerodynamic efficiency. The Jaguar D-Type was introduced purely for competition, but after Jaguar withdrew from racing, the company offered the remaining, unfinished chassis as the roadgoing Jaguar XK SS, by making changes to the racers: adding an extra seat, another door, a full-width windshield and primitive folding top, as concessions to practicality. However, on the evening of 12 February 1957, a fire broke out at the Browns Lane plant destroying nine of the twenty five cars that had already been completed or in semi-completion. Production is thought to have included 53 customer D-Types, 18 factory team cars, and 16 XKSS versions.

Design

The new chassis followed aircraft engineering practice, being manufactured according to monocoque principles. The central tub, within which the driver sat, was formed from sheets of aluminium alloy. To this was attached an aluminium tubing subframe carrying the bonnet, engine, front suspension, and steering assembly. The rear suspension and final drive were mounted directly onto the monocoque itself. Fuel was carried in deformable bags inside cells within the monocoque; another aircraft innovation.

The highly efficient, aerodynamic bodywork was largely the work of Malcolm Sayer, who joined Jaguar following a stint with the Bristol Aeroplane Company during World War II. Although he also worked on the C-Type, the limitations of the conventional separate-chassis did not allow full expression of his talent. For the Jaguar D-Type, Sayer insisted on a minimal frontal area. To reduce its height, Haynes and former-Bentley engineer Walter Hassan developed dry sump lubrication for the XK engine. By also canting the engine over by 8° (resulting in the trademark, off-centre bonnet bulge) the reduction in area was achieved. Care was taken to reduce drag due to the underbody, resulting in an unusually high top speed; for the long Mulsanne Straight at Le Mans, a large vertical stabiliser was mounted behind the driver's head for aerodynamic stability with minimum drag. For the 1955 season, factory cars were fitted with a revised, long-nose version of the bodywork, which increased top speed even further.

Mechanically, many features were shared with the outgoing C-Type. The ground-breaking disc brakes were retained, as was the XK engine. Apart from the new lubrication system, as development progressed during the Jaguar D-Type's competition life the engine was also revised. 1955 saw the introduction of larger valves, and an asymmetrical cylinder head design within which to accommodate them. The Jaguar D-Type was the second racing car to have Dunlop disk brakes. The Citroën DS, introduced a year later, was the first production car with disk brakes in Europe. The Crosley Hotshot was the first American automobile with disk brakes, in 1949.

Elements of the body shape and many construction details were used in the iconic Jaguar E-Type.

Competition history

The Jaguar D-Type was produced by a team, led by Jaguar's race manager Lofty England, who always had at least one eye on the 24 Hours of Le Mans, the most prestigious endurance race of the time. As soon as it was introduced to the racing world in 1954, the D-Type was making its presence felt. For the 1954 24 Hours of Le Mans the new car was expected to perform well, and perhaps even win. However, the cars were hampered by sand in their fuel. After the fault had been diagnosed and the sand removed, the car driven by Duncan Hamilton and Tony Rolt quickly got back on the pace, finishing less than one lap down on the winning Ferrari.

The 1955 car incorporated the new long-nose bodywork, and the engine had been uprated with larger valves. The team again proved strong at Le Mans, and with no sand to worry about they were a good match for the Mercedes-Benz 300 SLR cars who were hotly tipped to win. Sadly the contest was curtailed by one of the worst accidents ever to occur in motorsport: after only three hours of the twenty-four had elapsed, Pierre Levegh's SLR clipped the tail of an Austin-Healey, sending the German machine into the hay-bale barrier. The Mercedes erupted into a flaming ball and sent burning wreckage and debris into the crowd. More than 80 people, including Levegh, were killed, and many more injured. Mercedes withdrew from the race almost immediately, although at the time Juan Manuel Fangio was leading in his SLR, but Jaguar opted to continue. Some blamed Mike Hawthorn for causing the crash as he swerved his Jaguar D-Type in front of the Healey, setting off the tragic chain of events. Hawthorn and his co-driver Ivor Bueb went on to win the race.

With Mercedes deciding to withdraw from motorsport at the end of the 1955 season, the field was clear for Jaguar to clean up at the 1956 24 Hours of Le Mans race. However, it proved to be a bad year for the works team; only one of their three cars made it to the finish, and then only in 6th place. Luckily for the Jaguar D-Type's reputation, the small Edinburgh-based team Ecurie Ecosse were also running a D-Type, driven by Ron Flockhart and Ninian Sanderson, and this car came through to win ahead of works teams from both Aston Martin and Scuderia Ferrari. Away from Le Mans, the Cunningham Team raced several Jaguar D-Types after being offered the automobiles by Jaguar's head, Sir William Lyons, if Briggs Cunningham would stop building his own automobiles. In May 1956, the Cunningham team's entries in the Cumberland circuit in Maryland included three of those D-Type Jaguars - characteristically painted in the pristine white-and-blue Cunningham Team colors - for drivers John Fitch, John Gordon Benett, and Sherwood Johnston.

For 1958, the Le Mans rules were changed, limiting engine size to 3 liters for sports racing cars, thus ending the domination of Jaguar's D-Type with 3.8 liter XK engine. Jaguar developed a 3-liter version of the XK engine, which powered D-Types in the 1958, 1959 and 1960 Le Mans races. However, the 3-liter version of the XK engine was never reliable and by 1960 was not producing enough horsepower to be competitive.

With ever decreasing factory support and increasingly competitive cars from rival manufacturers, the Jaguar D-Type's star waned. Although it continued to be one of the cars to beat in club- and national-level races it never again achieved a podium result at Le Mans, and by the early 1960s had disappeared into obsolescence.

Ford Model A, 1930

2011-06-22T07:22:00.000-07:00

Ford Model A, 1930

Ford Model A, 1930

BMW 320 PS Tourer

2011-06-17T21:47:00.000-07:00

BMW 320 PS Tourer

Volvo S60, 2000

2011-06-11T06:56:00.000-07:00

Volvo S60, 2000

Volvo S60 is a entry-level luxury car / compact executive car built by Volvo that was first introduced in 2000. It uses the Volvo P2 platform, which is shared with the Volvo V70, Volvo S80 and Volvo XC90. It was one of the first "curvy Volvos" designed by Peter Horbury and appropriately used the tagline "Revolvolution" in its advertising campaign. The model was refreshed in 2004.

Engines

* 2.0, 140hp/103kW, 220Nm, petrol
* 2.4i, 170hp/125kW, 225Nm, petrol
* 2.4T, 197hp/146kW, 285Nm, petrol, turbo (replaced by 2.5T)
* 2.5T 210hp/154kW, 320Nm, petrol, turbo
* T5, 260hp/191kW, 350Nm, petrol, turbo
* R, 300hp/220kW, 400Nm, petrol, turbo
* D, 126hp/93kW, 300Nm, diesel, turbo
* 2.4D, 163hp/120kW, 340Nm, diesel, turbo
* D5, 185hp/136kW, 400Nm, diesel, turbo
* Bi-Fuel, 140hp/103kW, 192Nm, CNG/petrol

BMW 503 Coupe, 1956

2011-06-09T04:02:00.000-07:00

BMW 503 Coupe, 1956

Cadillac Eldorado, 1959

2011-06-07T01:12:00.000-07:00

Cadillac Eldorado, 1959

The Eldorado model was part of the Cadillac line from 1953 to 2002. The Cadillac Eldorado was the longest running American personal luxury car as it was the only one sold after the 1998 model year. Its main competitors included the Mark Series and the lower-priced Buick Riviera. The name Eldorado was derived from the Spanish words "el dorado", the "gilded one"; the name was given originally to the legendary chief or "cacique" of a S. American Indian tribe. Legend has it that his followers would sprinkle his body with gold dust on ceremonial occasions and he would wash it off again by diving into a lake. The name more frequently refers to a legendary city of fabulous riches, somewhere in S. America, that inspired many European expeditions, including one to the Orinoco by England's Sir Walter Raleigh.

History
The name was proposed for a special show car built in 1952 to mark Cadillac's Golden Anniversary; it was the result of an in-house competition won by Mary-Ann Zukosky (married name = Marini), a secretary in the company's merchandising department. Another source, Palm Springs Life magazine, attributes the name to a resort destination in California's Coachella Valley that was a favorite of General Motors executives, the Eldorado Country Club. In any case, the name was adopted by the company for a new, limited-edition convertible that was added to the line in 1953.

A different Eldorado Brougham was sold for 1959 and 1960. These cars were not quite so extravagantly styled but were very unusual pieces in themselves. Priced at $13,075, they cost $1 more, each, than their older siblings. The design was 100% Cadillac but the company contracted out the assembly to Pinin Farina of Italy, with whom the division has had a long-running relationship, and these Eldorados were essentially hand-built in Italy. Their discreet, narrow taillights, nicely integrated into modest tailfins, contrasted sharply with the "rocketship" taillights and massive fins of the standard 1959 Cadillacs and were an indication of where Caddy styling would go in the next few years. However, build quality was not nearly to the standard of the Detroit hand-built 1957–1958s, and the 1959–1960 Broughams are less desirable, it seems, than the 1st generation Broughams, although their value and collectibility remain high.

The last Eldorado Seville was built in 1960. After that, the Eldorado convertible became essentially a trim version of the standard Cadillac convertible. With the end of the importation of the Italian-built Eldorados in 1960, the name entered something of a fallow period.

Alfa Romeo Tipo 158 Alfetta, 1938

2011-06-07T00:26:00.000-07:00

Alfa Romeo Tipo 158 Alfetta, 1938

The Alfa Romeo 158/159, also known as the Alfetta (Little Alfa in Italian), is one of the most successful racing cars ever produced. The Alfa Romeo 158 and its derivative, the 159, took 47 wins from 54 Grands Prix entered. It was originally developed for the pre-World War II voiturette formula (1937) and has a 1.5 litre straight-8 supercharged engine. Following World War II, the car was eligible for the new Formula One introduced in 1947. In the hands of drivers such as Nino Farina, Juan-Manuel Fangio and Luigi Fagioli, it dominated the first two seasons of the Formula One World Championship.

The first version of this successful racing car, the Alfa Romeo 158, was made during 1937/1938. The main responsibility for engineering was given to Gioacchino Colombo.

The car's name refers to its 1.5 litre engine and eight cylinders. The voiturette class was for racing cars with 1.5 litre engines, standing in the same relation to the top 'Grand Prix' formula (usually for 3 litre engines) as the GP2 series does to Formula One today. Alfa's 3 litre racing cars in 1938 and 1939 were the Tipo 308, 312 and 316.

The Alfa Romeo 158 debuted with the works Alfa Corse team at the Coppa Ciano Junior in August 1938 at Livorno, Italy, where Emilio Villoresi took the car's first victory. At that time the 1479 cc engine produced around 200 bhp (150 kW) at 7000 rpm. with the help of a single-stage Roots blower. More success came at the Coppa Acerbo, Coppa Ciano and Tripoli Grand Prix in May 1940. Soon World War II stopped development of the car for six years. After the war the engine was developed further to push out 254 bhp (189 kW) in 1946.

In 1947, the Alfetta became eligible for the newly-created Formula One. The new rules allowed 1500 cc supercharged and 4500 cc naturally aspirated engines. The Alfa Romeo 158 was modified again, this time to produce over 300 bhp (220 kW) and was denoted as Alfa Romeo Tipo 158/47. The car made a tragic debut in the 1948 Swiss Grand Prix where Achille Varzi lost control of his car and was killed. Another loss for the team came in practice for the 1949 Buenos Aires Grand Prix, where Jean-Pierre Wimille was killed in an accident (driving with Simca-Gordini).

The car won every race in which it competed during 1950; it was incredible that a car which had originated in 1938 was so victorious. The Alfa Romeo team included talented drivers such as Giuseppe Farina and Juan Manuel Fangio, the latter of whom later won the World Drivers' Championship five times.

At the end of the 1950 season, a further updated version known as the Alfa Romeo 159 was produced.

Subaru R-2, 1969

2011-06-03T20:52:00.000-07:00

Subaru R-2, 1969

Subaru R-2, 1969

Fiat 130HP Grand Prix De France Corsa 1907

2011-06-02T06:54:00.000-07:00

Fiat 130HP Grand Prix De France Corsa 1907

Fiat 130HP Grand Prix De France Corsa 1907

Daihatsu Compaqno Berina 800, 1965

2011-06-02T04:40:00.000-07:00

Daihatsu Compaqno Berina 800, 1965

Daihatsu Compaqno Berina 800, 1965

BMW 328, 1936

2011-05-31T13:49:00.000-07:00

BMW 328, 1936

In the mid-30s, production roadsters and competition cars were still very similar in technical terms - and motorsport was still the ideal place to prove the performance and reliability of a production car. But to keep up with the competition, BMW soon had to build cars with more power and muscle. So BMW's engineers looked for ways and means to significantly increase engine output without increasing engine size. And they found the solution - the M328, the engine powering the legendary BMW 328 sports car in 1936.

Right from the start in its debut at Nürburgring on 14 June 1936, BMW's new roadster literally pulverised even the most powerful supercharged competitors. This outstanding success was attributable to the well-balanced combination of superior engine power and cutting-edge suspension technology characteristic of BMW roadsters to this day: 80 hp in the regular version and low weight of just 830 kg or 1,830 lb gave this elegant roadster superior performance still impressive today.

The BMW 328 Roadster initially being restricted to motorsport as of mid-1936, production of the series model started in spring 1937. And so this high-performance sports car was driven not only by BMW's works drivers, but also by private customers since, over and above racing, it was very well suited for everyday use. And with its top speed of 155 km/h or 96 mph, this was indeed one of the fastest cars on the road back then.

The BMW 328 Roadster remained a very rare bird, with only 464 units of this classic roadster being built up to 1940.

Volks Wagen Passat, 1973

2011-05-30T06:06:00.000-07:00

VW Passat, 1973

The original VW Passat was launched in 1973. The body types offered originally were 2- and 4-door sedans and similar looking three- and five-door versions. Externally all four shared a modern fastback style design, styled by the Italian designer Giorgetto Giugiaro). All the versions sharing the same external design was unusual, since two of the models were traditional sedans with a separate trunk. A five-door station wagon was introduced in 1974. Passat was effectively a less expensive version of the Audi 80 (Fox) sedan which had been introduced a year earlier and which had a more conservative body style, so that the Audi and Volkswagen models had distinct body styles and image. In Europe, Passat was equipped with hexagonal or single round or double round headlights depending on specification.

In North America, the car was called the Dasher, and was only available with round DOT-spec lights. The three-door hatchback model was launched in North America in 1975.

VW Passat was one of the most modern European family cars at the time, and was intended as a replacement for the ageing Volkswagen Type 3, and as a contemporary rival for popular Ford Taunus/Cortina) and Opel Ascona/Vauxhall Cavalier. The Passat was Wheels magazine's Car of the Year for 1974 and its sister model Audi 80 was nominated car of the year by the European motor press a year earlier. The platform was named B1.

The Passat used the 4 cylinder OHC 1.3 L, 1.5 L, and 1.6 L petrol engines, also used in the Audi 80—longitudinally mounted with front wheel drive, in Audi tradition, with either a 4-speed manual transmission or 3-speed automatic. It had a MacPherson strut front suspension with a solid axle/coil spring setup in back.

The SOHC 1.5 produced 75 PS (55 kW) and was enlarged to 1.6 L for 1975. The larger engine included tighter emissions controls, so power output dropped to 70 PS (52 kW). Bosch fuel injection on the 1.6 was introduced in 1976 and brought power up to 78 PS (57 kW).

The whole range received a facelift in 1977 (launched 1978 outside Europe), featuring an interior upgrade and subtly revised styling including repositioned indicators and quad (round) headlights on all models. This generation was sold in Brazil well into the 1980s and extensively exported to Iraq, where many are still on the road. It was also assembled in Nigeria.

Porsche 901, 1963

2011-05-29T04:08:00.000-07:00

Porsche 901, 1963

The Porsche 901 was the name originally intended for the Porsche 911. By the early 1960s, Porsche project design numbers had reached into the 800s. For instance, Porsche's 1962 F1 model was called Porsche 804.

At the Internationale Automobil-Ausstellung (Frankfurt Motor Show) in Frankfurt in September 1963, Porsche presented its successor to the Porsche 356 as the Porsche 901. It took several more months until the cars was sold to customers. In late 1964, after having sold about 82 cars, the Porsche 901 was presented at the Paris Auto Salon. There, French car maker Peugeot objected to Porsche using any three digit number where the middle number was 0, owning the naming rights and having already sold many models with that scheme.

So, Porsche simply replaced the middle 0 with a 1, and called the car Porsche 911.

Also, other Porsche models were affected, which were primarily intended for racing but also sold as road legal cars. Here, Porsche kept the internal part number of 90x, but sold the car with a name, like: Porsche 904 as Carrera GTS, Porsche 906 as Carrera 6.

Porsche enthusiasts continue to refer to these cars by their three digit design numbers.

Later, Porsche introduced pure racing cars which were not sold for road use, so not competing with any road-going Peugeot. These carried the design numbers: Porsche 907, Porsche 908, Porsche 909.

Nearly three decades later, a 905 was entered in the 1991 24 Hours of Le Mans, but not by Porsche (which then had won over a dozen times already), but by Peugeot: The Peugeot 905 won twice, in 1992 and in 1993. A Peugeot 908 Diesel was entered in the 2008 event, and won in 2009. Peugeot never used the number 901.
The 901 number is used among Porsche enthusiasts as shorthand to identify the aluminum 5-Speed transmission used in early 911s, the part number for these transmissions used an 11 digit code that began with 901 as did many other parts on the early cars. Later 911s from 1969 used a different magnesium case and a part number beginning with 911.

Opel Kapitan, 1959

2011-05-27T08:16:00.000-07:00

Opel Kapitan, 1959

In the fall of 1959, the new Opel Kapitan (known internally as the Opel Kapitan P2 2.6-liter) rolled off the production line in Rüsselsheim for the first time. Thanks to its distinctive design, high comfort and state-of-the-art technology, it soon became a bestseller. A total of 145,616 units were sold up to 1964, making the P2 2.6-liter the most successful Opel Kapitan ever. Fifty years after its market launch, the new top model from Rüsselsheim, the Opel Insignia, is repeating history. After less than 12 months on the market, over 150,000 drivers already call the innovative car their own. Five decades of progress in automotive development separate the two models, but both - each at their own time - play a groundbreaking role for the brand with the distinctive lightning-bolt emblem.

Opel Kapitan P2 2.6-liter - "More value for less money"

While the first post-war Opel Kapitan was still strongly influenced by American aesthetics, the second generation as of fall 1959 was distinguished by its own unique appearance and more European design. "The sweeping lines and softly flowing transitions are now replaced by a firm emphasis on the horizontal and the effect of pronounced contours," explains a contemporary text. The bodywork became more rigid and straight lines "stretched" the car - an effect that was enhanced by the particularly flat roof. Opel increased driver vision by installing a wider panorama windscreen that projected more deeply into the roof, and improved access for rear-seat passengers by making some slight design changes to the roof edges.

The Opel Kapitan's 2.6-liter, in-line six-cylinder engine delivered 66 kW/90 hp and maximum torque of 190 Newton meters between 1,300 and 2,500 revs. The experts were particularly impressed by its smooth running characteristics - the result of a new engine mounting that ensured maximum noise insulation and improved vibration damping. Technical features such as the "actuation aid" for the clutch pedal were followed in the subsequent years by innovations such as "Hydra-Matic" automatic transmission and power steering. Thus, in terms of both technology and comfort, the Opel Kapitan set standards for automobile production at the time. Despite this, Opel refrained from increasing the price compared with the predecessor model, which also contributed to the sales success.

Aston Martin DB1, 1948

2011-05-26T06:27:00.000-07:00

Aston Martin DB1, 1948

Lotus Europe

2011-05-25T01:35:00.000-07:00

Lotus Europe 1965

Lotus Europe, a two door mid-engined GT coupé built by Lotus Cars from 1966 to 1975.

The original Lotus Europa used Lotus founder Colin Chapman's minimalist steel backbone chassis that was first used in the Lotus Elan, while also relying on its fibreglass moulded body for structural strength. The Europa was the first mass-produced mid-engine road car and was based on a prototype built to compete for Henry Ford II's contract to build a Le Mans race car in the early 1960s.

The Lotus Europa was designed and built to be an embodiment of Chapman's oft-stated philosophy of automotive design: "Simplify, then add lightness."

The 4-wheel independent suspension was typical of Chapman's thinking; the rear suspension consisted of two relatively large trailing arms, one lower locating link per side, and the axles were used as upper locating links; very similar to Formula racing car designs of that era. Aside from the doors, bonnet (hood), and trunk (boot), the body was cast as a single unit of fibreglass.

The car's handling prompted automotive writers to describe the Europa as the nearest thing to a Formula car for the road.

Series 1

The Series 1 or S1 Europa (also known as Lotus Type 46) was announced for sale to European markets on December 20, 1966. The first cars were delivered in France in February 1967, sold as Lotus Europe. The S1 was fitted with a modified Renault 16 1470 cc engine and a 4-speed gearbox. The engine was a special 82 hp (61 kW) version (as opposed to the 52 hp (39 kW) generated in standard form). Lotus turned the engine and gearbox through 180° to accommodate the Europa's longitudinal mid-engined layout, inverting the gearbox's crown wheel and its pinion gear to avoid having four reverse gears. The S1 weighed 686 kg (1512 lb), had a top speed of 110 mph (180 km/h), and did 0-60 mph in 10 seconds. Of particular note, nearly 0.9 g (8 m/s²) lateral acceleration was achieved on road tires of that era.

Including the S1A and S1B (which incorporated some of the later S2 changes) variations, 644 Europa S1s were manufactured.

Type 47

During 1966, whilst the Factory was sorting out the first production Type 46 (S1), Team Lotus raced the Type 47, a Europa modified for the track, with a 165 hp (123 kW) 1594 cc Lotus/Ford/Cosworth twin cam engine, which used a Cosworth-modified Kent block, and a Hewland FT 200 5-speed gearbox. The Type 47 is fondly remembered for taking both first and second places (driven by John Miles and Jackie Oliver, respectively) in its very first race held at the storied Brands Hatch race course on Boxing Day. It's believed that 55 Type 47s were built by Lotus between 1966-70. Two other sports racer prototypes based on the Europa called, Type 62, were built in 1969. A twin-cam powered Europa would not be available to the roadgoing public until the Type 74, in 1971. Replica 47s are bespoke-manufactured by Banks Europa Engineering, in several variations. A one-off 47, fitted with a Rover V8 engine, was built by GKN in 1968 and registered, GKN 47 D.

Series 2
The Europa S2, or Type 54, was introduced in April 1968. It used the same Renault engine as the Type 46, but offered a number of refinements, including electric windows, fully adjustable seats, a new interior, and a polished wooden facia for the dashboard. Per request of the automotive insurance industry, Lotus switched to bolt fasteners (instead of resin bonding) to attach body to frame. A red Type 54 Europa S2 was driven by co-star Linda Thorson in several 1968 episodes of The Avengers (TV series). A small number of Type 54s were modified to be "federalized", that is, made suitable for export to the United States.

In 1969, the Type 65 aka S2 Federal was born, with additional changes to the body, chassis, and the powerplant to better comply with U.S. D.O.T. standards. Among the newer bits, the Renault engine was expanded to 1565 cc capacity over the previous 1470 cc. Road&Track Magazine tested the Federal S2 and recorded 0-60 mph in 9.6 seconds with a top speed of 116 mph (187 km/h). 3,615 S2s were produced.

Twin Cam and Special

In 1971, the Type 74 Europa Twin Cam was made available to the public, with a 115 hp (78 kW) 1558 cc "big valve" Lotus-Ford Twin Cam engine (105 hp US Federal emissions control version until the end of production), a new Renault 4-speed gearbox (Type 352) and a re-designed bodyshell to improve rearward visibility. Mike Kimberley, who rose to become chief executive of Group Lotus, then a new engineer at Lotus, was appointed Chief Engineer of the Europa TC project. 1,580 cars were shipped as Europa Twin Cam before Lotus switched to a 126 hp (94 kW) aspirated by Dellorto/Weber carburettors version of the same engine; in addition to offering a new Renault 5-speed (Type 365) gearbox option; and renamed the car Europa Special. It weighed 740 kg (1631 lb), had a top speed of 123 mph (198 km/h), did 0-60 mph in 7.0 seconds, and ran the 1/4mile in 14.9 sec. A total of 3,130 Specials were manufactured. To honour Team Lotus's 1972 and 1973 F1 World Championships, a few black with gold pin stripe - plus numbered badge - Europa Specials were offered as the first ever John Player Special commemorative motor vehicles.

VW Rabbit, 1977

2011-05-24T01:13:00.000-07:00

VW Rabbit, 1977

The Volkswagen Rabbit GTI, the North American version of the high-performance Golf GTI, debuted in the 1983 model year and was in production for two seasons. Assembled from parts made in Mexico, Canada, Germany and the U.S. in Volkswagen's Westmoreland, Pennsylvania assembly plant, the Rabbit GTI had the same Mk1 chassis, and the same A1 body type as the Mk1 Golf GTI that had been on sale in Europe since 1976, with a few exceptions. Key distinct features of the Rabbit GTI were its GTI surname, the squared front end styling, blue or red felt and leatherette trim, and its alloy "snowflake" wheels. The squared styling of the front end, particularly the wraparound blinkers, gave it added safety and slight improvement in performance. Under the hood, the engine was a JH 1.8 liter 4-cylinder engine that ran on unleaded petroleum fuel. The JH 1.8l was transversely mounted, and it would peak in stock condition at around 80-85 HP. Claims to gas mileage of near-perfectly tuned Rabbit GTIs range between 25 and 30 miles per gallon.

Note that the Rabbit GTI first appeared in Canada in 1979 with the 1.8l engine and 5spd transmission. It was initially available in red, white and black.

Citroen DS 19 Cabrio, 1964

2011-05-23T02:32:00.000-07:00

Citroen DS 19 Cabrio, 1964

The Citroën DS (also known as Déesse, or Goddess, after the punning initials in French) was an automobile produced by the French manufacturer Citroën between 1955 and 1975. Citroën sold nearly 1.5 million D-series during its 20 years of production.The DS is well-known for its futuristic, aerodynamic body design, and for its innovative technology (including its hydropneumatic self-leveling suspension system).

The DS advanced the achievable standards in terms of ride quality, roadholding, handling, and braking in an automobile. Automotive journalists of the time often noted that competitors took decades to adapt to the higher standards it set. The smooth, aerodynamic body lines gave the car a futuristic appearance. While it looked very unusual in 1955, public tastes appear to have caught up with the DS in the post-Ford Taurus/Audi 100 era.

Model history
After 18 years of development in secret as the successor to the venerable Traction Avant, the DS 19 was introduced on October 5, 1955 at the Paris Motor Show. The car's appearance and innovative engineering captured the imagination of the public and the automobile industry almost overnight. 743 orders were taken in the first 15 minutes of the show, and orders for the first day totalled 12,000.

Far from being just a fascinating technology in search of a purpose, contemporary journalists were effusive in noting how the DS dramatically pushed the envelope in the ride vs. handling compromise possible in a motor vehicle.

The high price tag, however, hurt general sales in a country still recovering from World War II 10 years earlier, and a submodel, the ID (another pun: in French, Idée, or Idea), was introduced in 1957 to appeal to more cost-conscious buyers. The ID shared the same body with the DS, but had more traditional features under the hood. It had no power steering (though this was added as an option later), and instead of the hydraulically controlled manual transmission and clutch, it had a conventional clutch and transmission. Interestingly, the first model series was called 11D, a clear reminder of the last model of the Traction Avant, the 11C. A station wagon variant, the ID Break, was introduced in 1958.

Outside of France, the car's radical and cosmopolitan design appealed to non-conformists. A United States advertisement summarised this selling point: "It takes a special person to drive a special car".

Throughout its model lifetime, the DS managed to remain ahead of its time. It featured power disc brakes, a hydropneumatic suspension including an automatic levelling system and variable ground clearance, power steering and a semi-automatic transmission. A fiberglass roof reduced weight transfer. Inboard front brakes (as well as an independent suspension) reduced unsprung weight. Different front and rear track widths and tire sizes reduced the understeer typical of front-engined and front-wheel drive cars.

Despite the rather leisurely acceleration afforded by its small four-cylinder engine, the DS was successful in motorsports like rallying, where sustained speeds on poor surfaces are paramount.

The DS came in third in the 1999 Car of the Century competition, recognizing the the world's most influential auto designs. Winner and second place went to the Ford Model T and the Mini. It placed fifth on Automobile Magazine "100 Coolest Cars" listing in 2005.

Technical innovations
Hydraulic system
The hydraulic system of the DS 19 was a revolution. Previously hydraulics had been restricted to use in brakes and power steering; the DS used them for the suspension, clutch and transmission. The later ID19 had manual steering and a simplified power braking system.

Suspension
At a time when few passenger vehicles had caught up with the four-wheel independent suspension of the Traction Avant, the application of the hydraulic system to the car's suspension system to provide true self-levelling was a stunning move. This application - 'hydropneumatic suspension' - was pioneered the year before on the rear of the top of range Traction Avant 15CV-H.

At first it was often described as air/oil suspension, since both elements played a key role.

Each wheel was connected not to a spring, but to a hydraulic suspension unit consisting of:
    * a sphere of about 12 cm in diameter containing pressurised nitrogen
    * a cylinder containing hydraulic fluid screwed to the suspension sphere
    * a piston inside the cylinder connected by levers to the suspension itself
    * a damper valve between the piston and the sphere

A membrane in the sphere prevented the nitrogen from escaping. The motion of the wheels translated to a motion of the piston, which acted on the oil in the nitrogen cushion and provided the spring effect. The damper valve took place of the shock absorber in conventional suspensions.

The hydraulic cylinder was fed with hydraulic fluid from the main pressure reservoir via a height corrector, a valve controlled by the mid-position of the anti-roll bar connected to the axle. If the suspension was too low, the height corrector introduced high-pressure fluid. If it was too high, it released fluid back to the fluid reservoir. In this manner, it maintained a constant height. A control in the cabin allowed the driver to select one of five heights:
    * normal riding height.
    * two slightly higher riding heights, for poor terrain.
    * two extreme positions for changing wheels.

The DS did not have a jack for lifting the car off the ground. Instead, the hydraulic system enabled wheel changes with the aid of a simple adjustable stand.

Source and reserve of pressure
The central part of the hydraulic system was the high pressure reservoir, which maintained a pressure of between 130 and 150 bar in two accumulators. These accumulators were very similar in construction to the suspension spheres. One was dedicated to the brakes, and the other ran the other hydraulic systems. Thus in case of a hydraulic failure (a surprisingly infrequent occurrence), the first indication would be that the steering became heavy, followed by the gearbox not working; only later would the brakes fail.

Hydraulic fluid
The original hydropneumatic system used a vegetable oil (LHV or liquide hydraulique végétale) similar to that used in other cars at the time. Very soon, Citroën changed to using a synthetic fluid (LHS or liquide hydraulique synthétique). Both of these had the disadvantage that they are hygroscopic, as is the case with most brake fluids. Disuse allows water to enter the hydraulic components causing deterioration and expensive maintenance work. The difficulty with hygroscopic hydraulic fluid was exacerbated in the DS/ID due to the extreme rise and fall in the fluid level in the reservoir, which went from nearly full to nearly empty when the suspension "got up" and the 6 accumulators in the system filled with fluid. With every "inhalation" of fresh moisture- (and dust-) laden air, the fluid absorbed more water. In August 1967, Citroën introduced a new mineral oil-based fluid LHM, or liquide hydraulique minérale. This fluid was much less aggressive on the system and it remains in use to the present day.

Briefly illegal in the United States (US federal law requires motor vehicle brake fluid to be red - an exception had to be granted to Citroën), LHM has since been adopted by manufacturers like Rolls-Royce, Jaguar, BMW, and Audi under different labels, like "Total," "Pentosin," and others.

LHM required completely different materials for the seals. Using either fluid in the incorrect system would completely destroy the hydraulic seals very quickly. To help avoid this problem, Citroën added a bright green dye to the LHM fluid and also painted all hydraulic elements bright green. The former LHS parts were painted black.

Several different hydraulic pumps were used. The DS used a seven-cylinder axial piston pump driven off two belts and delivering 175 bar of pressure. The ID19, with its simpler hydraulic system, had a single cylinder pump.

Gearbox and clutch
The mechanical aspects of the gearbox and clutch were completely conventional and the same elements were used in the ID 19.

The gear change control consisted of:
    * Hydraulic gear selector.
    * Clutch control. This was the most complicated part. The speed of engagement of the clutch was controlled by:
    * A centrifugal regulator, sensing engine rpm and driven off the camshaft by a belt
    * The position of the butterfly valve in the carburettor (i.e. the position of the accelerator)
    * The brake circuit: when the brake was pressed, the engine idle speed dropped to a rpm below the clutch engagement speed, thus preventing friction while stopped in gear at traffic lights. When the brake was released, the idle speed increased to the clutch dragging speed. The car would then "creep" much like automatic transmission cars. This drop in idle throttle position also caused the car to have more engine drag when the brakes were applied even before the car slowed to the idle speed in gear, preventing the engine from "pulling" against the brakes.

Impact on Citroën brand development
The 1955 DS in one stroke cemented the Citroën brand name as an automotive innovator. In fact, the DS caused such a huge sensation that Citroën was fearful future models would not be bold enough. Other than variations on the very basic 2 cylinder economy car Citroën 2CV, like the Citroën Ami, no new models were introduced from 1955 to 1970.

The DS was a large, expensive executive car and a downward brand extension was attempted, but without result. Throughout the late 1950s and 1960s Citroën developed many new vehicles for the very large market segments between the 2CV and the DS, occupied by vehicles like the Peugeot 403, Renault 16 and Ford Cortina. None made it to production. Either they had uneconomic build costs, or were ordinary "me too" cars, not up to the company's high standard of innovation. Because Citroën was owned by Michelin as a sort of research laboratory, such experimentation was possible. Citroën finally did introduce the clever Citroën GS in 1970, which sold a spectacular 2.5 million units.

DS in the US
While the DS was a hit in Europe, it seemed rather odd in the United States. Ostensibly a luxurious car, it did not have the basic features that buyers of that era expected to find on such a vehicle - fully automatic transmission, air conditioning, power windows and a reasonably powerful engine. The DS price point was similar to the contemporary Cadillac luxury car. Also, people at the time wanted only the newest models, which changed every year, like fashion, yet the DS appeared vaguely derivative of the 1950 Hudson Hornet step-down design.

Outdated US legislation also banned one of the car's more advanced features, aerodynamic headlamps, now common in US automobiles. Ultimately, 38,000 units were sold. The first year of the aerodynamic glass over the DS' headlights along with driving lights turned by the steering, was also the first year these features were outlawed in the US.

Design variations

The DS always maintained its size and shape, with easily removable, unstressed body panels, but certain design changes did occur.

A station wagon version was introduced in 1958. It was known by various names in different markets (Break in France, Safari and Familiale in the UK, Wagon in the US, and Citroën Australia used the terms Safari and Station-Wagon). It had a steel roof to support the standard roof rack.

In September 1962, the DS was restyled with a more aerodynamically efficient nose, better ventilation and other improvements. It retained the open two headlamp appearance, but was available with an optional set of driving lights mounted on the front fenders. In 1965 a luxury upgrade kit, the DS Pallas (after Greek goddess Pallas), was introduced. This included comfort features such as better noise insulation, leather upholstery and external trim embellishments.

In 1967, the DS and ID was again restyled. This version had a more streamlined headlamp design, giving the car a notably shark-like appearance. This design had four headlights under a smooth glass canopy, and the inner set swivelled with the steering wheel. This allowed the driver to see 'around' turns, especially valuable on twisting roads driven at high speed at night.

However, this feature was not allowed in the US at the time (see World Forum for Harmonization of Vehicle Regulations), so a version with four exposed headlights that did not swivel was made for the US market.

The station wagon edition, the Break (called the ID Safari on the UK market) and "Familiale", was also upgraded. The hydraulic fluid changed in all markets (except the US) to the technically superior LHM (Liquide Hydraulique Minérale).

Rarest and most collectible of all DS variants, a convertible was offered from 1958 until 1973. The convertibles were built in small series by French carrossier Henri Chapron, for the Citroën factory. In addition, Chapron also produced a few coupés, non-works convertibles and special sedans (DS Lorraine for instance).

DS engines
As with all French cars, the DS design was impacted by the tax horsepower system, which effectively mandated very small engines.

Unlike the Traction Avant predecessor, there was no top-of-range model with a powerful six cylinder engine. The DS was designed around an air cooled flat six based on the design of the 2 cylinder engine of the 2CV, similar to the motor in the Porsche 911. Technical issues forced this idea to be scrapped.

Thus, for such a modern car, the engine of the original DS 19 was also old-fashioned. It was derived from the engine of the 11CV Traction Avant (models 11B and 11C). It was an OHV four-cylinder engine with three main bearings and dry liners, and a bore of 78 mm and a stroke of 100 mm, giving a volumetric displacement of 1911 cc. The cylinder head had been reworked; the 11C had a reverse-flow cast iron cylinder head and generated 60 hp at 3800 rpm; by contrast, the DS 19 had an aluminium cross-flow head with hemispherical combustion chambers and generated 75 hp at 4500 rpm. Apart from these details, there was very little difference between the engines: even the locations of the cylinder head studs were the same, so that it was possible to put the cylinder head of a DS on a Traction Avant engine and run it.

Like the Traction Avant, the DS had the gearbox mounted in front of the engine, with the differential in between. Thus the DS is a really a mid engine front wheel drive car. It initially had a four-speed transmission and clutch, operated by a hydraulic controller. To change gears, the driver flicked a lever behind the steering wheel to the next position and eased-up on the accelerator pedal. The hydraulic controller disengaged the clutch, engaged the nominated gear, and re-engaged the clutch. Manual transmission control was a lower-cost option. The later and simpler ID19 also had the same gearbox and clutch, manually operated. In the 1970s a five-speed manual and 3-speed fully-automatic were introduced, in addition to the original four-speed unit.

The DS and ID powerplants evolved throughout its 20 year production life. The car was underpowered and faced constant mechanical changes to boost the performance of the four-cylinder engine. The initial 1911 cc 3 main bearing engine (carried forward from the Traction Avant) of the DS 19 was replaced in 1965 with the 1985 cc 5 bearing motor of the DS 19a (called DS20 from September 1969).

The DS 21 was also introduced for model year 1965. This was a 2175 cc, 5 main bearing engine. This engine received a substantial increase in power with the introduction of Bosch electronic fuel injection for 1970, making the DS one of the first mass-market cars to use electronic fuel injection.

Lastly, 1973 saw the introduction of the 2347 cc engine of the DS 23 in both carbureted and fuel injected forms. The DS 23 with electronic fuel injection was the most powerful production model, producing 141 horsepower.

IDs and their variants went through a similar evolution, generally lagging the DS by about one year. ID models never received the DS 23 engine or fuel injection. The DS was offered with a number of transmission options, including the "Hydraulique" 4-speed semi-automatic, 4-speed and 5-speed manuals and a 3-speed Borg-Warner full-automatic. The full-automatic transmissions were intended for the US market, but as Citroën withdrew from the US in 1972, the year of highest US sales, due to constrictive road rules, most automatic DSs, being the DS 23 EFI sedans with air conditioning, were sold in Australia.

Jaguar E-Type, 1971

2011-05-21T07:30:00.000-07:00

Jaguar E-Type, 1971

Jaguar E-Type was produced from 1961 to 1974, during that time over 70,000 units were sold. It is widely regarded one of the most beautiful car designs of all time.