Tweet This Post Digg This Post Facebook MySpace Ping This Post

We recently detailed this beautiful 2004 dodge viper in red. It was not overly dirty to start but had a lot of contaminants stuck to the surface which we were able to get off with a premium hand wash and clay barring. Once the vehicle was completely clean we applied our highest quality wax on this vehicle to restore the paint to a glossy type finish. After a solid cleaning on the rims we polished them so they could once again shine as intended. Originally from Florida but now in New York and all cleaned up its ready to hit the road or a local car meet where this viper will surely turn some heads.

Tweet This Post Digg This Post Facebook MySpace Ping This Post

This 22ft Stingray boat was a tricky detail for us as it was heavily oxidized on many areas of the hull. The blue colored gel coat faded over the years and needed to be restored. We started by washing the entire boat down to remove surface containments presents. The boat was rinsed down and dried before compounding it with our high speed buffing wheel.

The compounding process took some time as we had to let it break down on the gel coat. This can be a time consuming process as an even coat needs to be applied to the hulls surface and the foam pad on the buffer needs to work the product through the gel coat. After removing the compound with a fresh microfiber towel, some areas needed to be hit again as a few areas where oxidation was present needed to be treated again. After removing the compound entirely, the boat was now ready to be waxed.

After applying and removing the wax, this Stingray really started to look like it did many years again. We also cleaned stains from the ceiling of the cabin, treated the leather seats (which lightened up considerably!) and treated the plastic, rubber, and vinyl around the cockpit area. We took a few pictures before we left as we were pleased with the results. We were pleased that we successfully removed the oxidation from the hull and left a brilliant shine and lasting protection behind.

Tweet This Post Digg This Post Facebook MySpace Ping This Post

We recently detailed a 2003 Toyota Matrix in East Meadow, NY. This car was in rough shape when we found it. It had recently been purchased from an older couple that did not maintain its appearance. Mechanically it was sound; however the exterior of the vehicle had never been waxed before. The previous owners did not take it to the car wash as it was parked on a street in Manhattan. The new owner got a steal on it and wanted to make the car look new. Calling the detailing specialists was the right move.

We washed the car down with a foam gun and used our microfiber wash mitts to scrub the vehicle down. There was a lot of dirt and surface contaminants on the paint as it had never been washed. Next, we used clay to level the paint and bring it to a bare state free off all containments. As we lubricated the painted surfaces the clay glided easily making stripping through years of built up grime.

After washing the vehicle down a 2nd time we dried it with microfiber and prepared to apply wax. We applied a coat of carnauba based wax with a Porter Cable 7424 XP and varied the speeds to remove black streaks on the paint.

A new shine was brought back to a previously tired paint job. Next, we detailed the interior and started by vacuuming the carpets, removing stains from the seats, treating the dashboard and plastic and vinyl trim, and last we polished the windows. To finish up, we cleaned out the door jams and sprayed some “new car” scent to give it that new car feel. The owner was shocked with the results of the detailing job. He was ecstatic that the car he just purchased ended up looking better than he expected. Five Star Detailing will continue to maintain this vehicle as we’ve been invited back in the spring to clean it after the rough winters in New York.

Tweet This Post Digg This Post Facebook MySpace Ping This Post

This 1995 Larson was in rough shape when we found it. The blue colored hull was oxidized and desperately needed to be compounded and waxed. It was clear that the elements had taken a toll on this boat over the years and a quality detailing job was in order to bring it back to life.

We’ve detailed boats in the water before in the Rockaways, but this boat was out of the water making it easier for us to detail the hull and bow area. We started by giving this boat a thorough wash and scrub to start. Acetone was used to remove black streaks that had been visible for years. Using Mary Kate’s “On and Off” we were able to remove all rust stains above the waterline of the boat.

The blue colored hull was compounded twice to bring back the richness of the color. The oxidation came back slightly after the first application making it necessary to compound again at a high buffing speed. After the marine wax was removed, the final results for the exterior of this boat were noticeable.

The cockpit area cleaned up nicely as we removed the cleaner wax that had been applied by machine. We vacuumed and detailed the cabin area including the bathroom. All chrome was polished and the leather seating areas were treated. We were happy with results of the boat and so was the customer. He was not present at the time we finished, but sent us a thank you note by e-mail to express his gratitude. We hope to maintain the appearance of this boat for years to come.

Tweet This Post Digg This Post Facebook MySpace Ping This Post

This Larson located in West Sayville was in pretty good condition when we found it. The only area that needed serious attention was the white colored railing above the rub rail. We started by washing the entire boat down and scrubbing all areas to remove dirt and surface contaminants. After rinsing the boat down with water to wash off the marine concentrate, we dried all areas of the boat.

We compounded the areas above the rub rail which removed black streaks, stains, and gel coat imperfections. We used a Porter Cable 7424 XP using a dense foam pad to break down the compound. We applied using a lower speed and broke down the product at speed 6. The results left the fiberglass feeling smooth, clean, and free of visible imperfections.

Next, we applied a coat of high quality marine wax to the hull, topside railing, and cock pit areas. This Larson really shined up after the wax was removed. All leather seats were scrubbed and brightened up after they were dried. We polished the glass, chrome trim, and treated plastic and vinyl trim. We snapped a few pictures before we left as this boat is now shining and protected.

Tweet This Post Digg This Post Facebook MySpace Ping This Post

We detailed a 2005 Jaguar S-Type R in Middle Village, NY. This car was in good condition when we found it, but needed a quality detailing job to enhance its appearance and give it a brilliant shine. We’ve detailed other vehicles at this client’s residence as they were happy in the past with our results. This was the first time that we were detailing the Jaguar as we were excited to get started.

We started by washing the vehicle down to remove the loose dirt on the paint. Since the car is white, the black dirt was visible on the paints surface. Next, we took our clay bar to the entire vehicle to level the paint and remove old wax and surface contaminants. The Jaguar was washed again as the dirt and clay residue glided off the paint. We dried the vehicle down using new and soft microfiber towels. The microfiber we use is super absorbent and does not leave any film behind. Using new and premium microfiber is always a treat!

We applied a high end premium paint sealant that the owners request. He wanted extra shine and protection to compete with the appearance of his brother vehicle. (Black 350z, garage kept) As Five Star Detailing has serviced the other cars in the family, we could not leave one brother outshining the other! After the sealant was applied by machine, let sit to haze, and removed by hand, an unmatched shine was left. The vehicle looked like it came off the showroom floor as family, friends, and neighbors commented as they strolled by.

The interior of the vehicle came out just as nice as the exterior as we detailed the dashboard area, cleaned and treated the leather seats, vacuumed and removed stains from the carpets. Last, we polished the windows and neutralized the scent on the interior. There was a park across the street where we took a few pictures to show off the ride. The owner of the vehicle was pleased with the results and we look forward to coming back next season to detail.

Tweet This Post Digg This Post Facebook MySpace Ping This Post

We recently detailed a 27 ft. Wellcraft boat in Baldwin, NY. The 270 Coastal has an excellent design for cruising the Great South Bay, and also proving ample room for fishing. The cabin area is luxurious as it was our privilege to bring new life back into this boat.

We started by giving the entire boat a wash and scrub. There were many black streak around the cockpit area that needed to be addresses. Acetone and a damp microfiber towel allowed us to remove the streaks and stains with ease. After certain areas were chemically treated, we washed the entire boat again to make sure to remove the cleaners left on the gel coat. Since this was a topside detail we spent extra attention to the outside areas above the rub rail. The area around the windows was compounded before a coat of marine wax was applied by machine.

The entire boat received a coat of Royal Satin Marine Wax by Garry’s. The shine really came out on the boat after the wax was removed. The gel coated surfaces were left smooth to the touch and protected from the elements. We were pleased with the results of the boat and hope to detail more boats on the South Shore of Long Island soon.

Tweet This Post Digg This Post Facebook MySpace Ping This Post

This 2003 Toyota 4Runner was the victim of a poor detailing job in the past as the owner had described to us. The vehicle was located in Massapequa Park and was heavily swirled. The swirls originated from a detailing job last spring. As I described to the owner, a full paint correction job on this vehicle could take many hours and would be significantly beyond the budget of an average detailing. We delivered a cost efficient solution to minimize the appearance of the swirls and also leave the car protected for the cold weather coming this winter.

We started by washing the car down to remove all dirt and surface contaminants. Next, we took a clay bar to all painted surfaces to level the paint and bring it back to a bare state. We washed the car again to rinse off the excess dirt that had been lifted by the clay. We dried the vehicle down with microfiber before moving on to applying a high quality sealant.

We opted to use a product called Jet Seal 109 on the black paint. We’ve found that this sealant provides the best protection and shine for black paint. It gives a high gloss “wet look” appearance after the product is removed. The most important feature of this product is that is greatly minimizes the appearance of swirl marks without having to go into a multi-step paint correction process. Many enthusiasts use this product for high end vehicles, but this product has properties that many make mid-market vehicles look amazing.

After removing the Jet Seal 109, we detailed the interior of the vehicle treating the dashboard area, leather seats, carpets, and windows. The owner was extremely pleased with our results and happy that we were able to deliver the solution while staying within a reasonable budget. We’ve earned the customers trust and will be back this spring to apply another coat of Jet Seal 109.

Tweet This Post Digg This Post Facebook MySpace Ping This Post

We detailed a 2007 Acura Type-S in Queens, NY. This car was just purchased from an individual that resides in Manhattan. The previous owner did not take care of well as they never washed it and it was not kept in a garage. Being that it is a 2007 vehicle, it was still in pretty good condition and needed a professional detailing job bring the shine back.

We started by applying our citrus wash concentrate into our foam gun to wash the loose dirt off the vehicle. The surface contaminants washed off the car nicely before we took a clay bar to the paints surface. During the stage all the black streaks and marks were removed from the vehicle. Instead of using a compound that may have abrasive properties, clay is great for spot treatments on marks that would not be removed with a carnauba based cleaner wax.

We applied a coat of wax with our high speed orbital polisher with a foam pad that wasn’t that dense to navigate around tight corners. After the wax was removed the exterior had a radiant shine that was visible to the owner and neighborhood friends.

The interior of the car was thoroughly cleaned as the previous owner was a smoker. We were able to remove the smoke scent and put life back into the leather seats that appeared dry and hard to the touch. The leather softened up and was left with a shine which the owner appreciated. Last, we polished the windows and deodorized the carpet and the headliner. The owner was very happy with the results and put it immediately back in the garage for safe keeping. We hope to service more clients in Queens and continue detailing Acura’s and other luxury vehicles.

Tweet This Post Digg This Post Facebook MySpace Ping This Post