GSM NEPAL ZONE.

Infinix HOT 8 (X650B/ C/ D) Format & FRP LOCK/ GOOGLE ACCOUNT BYPASS | Unlock Tool New Security Update.

2024-03-24T17:46:00.007+05:45

On this Post, we are going to share how to format & remove FRP (Google Account) lock from Infinix Hot 8 (X650B, X650C, X650D) having Latest Security Update. It is based on Mediatek MT6765 CPU with Android 9, XOS 5.0. Here we use Unlock tool Latest version to remove Password & FRP lock from Infinix Hot 8 Phone.

Mobile Phone manufacturing company makes their system secure by providing Several Security Update & adding different account on every phone which is similar to Iphone iCloud lock. Generally FRP/ Account lock occur if the user Factory Reset their phone without sign-out their account and if the phone Lost and reset by the un- Known person who have found a phone.

FRP is an inbuilt data protection feature for all present-day Android smartphones, It protects phones from unauthorized access. The summarization of factory reset protection is FRP and Google provides the feature on Android Lollipop, Marshmallow, Nougat, Pie, Oreo, 10 Q, 11, 12 and most importantly Android 13 versions. The FRP turns On automatically when you have setup a Google Account on your Infinix Hot 8 Phone. After Reset your phone without removing the Google Account, you have to login with the same Google ID and password that you set up earlier on the device to bypass Google account verification lock on your Phones.

👉 If you have forgotten the Screen Lock/ account information, Then by following these simple step-by-step instructions will help you to format screen lock & remove FRP lock too.

Open Unlock Tool (use latest version),
Enter Username and Password then login,
Now Click on Infinix tab,
Select Model Infinix Hot 8 from options,
For new Security Make sure to tick on Preloader Auth options,
Click on [BROM] Factory Reset options,
Power off your Infinix Hot 8 phone and get ready to press boot key,
Press Volume UP & Down key and connect usb cable to your PC,
Make sure that you have install new version of Mediatek driver on your PC,
Now, wait untill you see Erasing Userdata OK,
After Format Complete your phone reboot automatically,
If your device is FRP lockedthen repeat same Steps,
Select [BROM] Erase FRP and Continue,
First boot take few minutes, after Welcome screen setup your phone,
That's All ! ow your phone is ready for use.

By this way you can remove FRP (Google ID) from Your Infinix Hot 8 phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

ZTE Blade A51 FRP Lock remove done via Unlock Tool.

2024-03-04T18:08:00.005+05:45

On this Post, we are going to share how to remove FRP (Google Account) lock from ZTE A51 Blade having Latest Security Update. It is based on SPD UNISOC SC9836A CPU with Android 11, GO Edition. Here we use Unlock tool Latest version to remove FRP lock from ZTE A51 Phone.

FRP is an inbuilt data protection feature for all present-day Android smartphones, It protects phones from unauthorized access. The summarization of factory reset protection is FRP and Google provides the feature on Android Lollipop, Marshmallow, Nougat, Pie, Oreo, 10 Q, 11, 12 and most importantly Android 13 versions. The FRP turns On automatically when you have setup a Google Account on your ZTE A51 Phone. After Reset your phone without removing the Google Account, you have to login with the same Google ID and password that you set up earlier on the device to bypass Google account verification lock on your Phones.

👉 If you have forgotten the Screen Lock/ account information, Then by following these simple step-by-step instructions will help you to format screen lock & remove FRP lock too.

Open Unlock Tool (use latest version),
Enter Username and Password then login,
Now Click on Sreadtrum tab,
Select ZTE Brand and Model ZTE Blade A51 [P963F60] from options,
Make sure to tick Server options,
Click on ERASE FRP options,
Power off your ZTE A51 phone and get ready to press boot key,
Press Volume down key and connect usb cable to your PC,
Make sure that you have install new version of Spreadtrum driver on your PC,
Now, wait untill you see Erasing FRP OK,
After Format Complete your phone reboot automatically,
First boot take few minutes, after Welcome screen setup your phone,
That's All ! ow your phone is ready for use.

Video Guide: ZTE A51 Blade FRP remove done.

By this way you can remove FRP (Google ID) from Your ZTE Blade A51 phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Vivo Y73 (V2059) latest Security Update FRP, Google account remove done.

2024-01-27T17:45:00.004+05:45

On this Post, we are going to share how to remove FRP (Google Account) lock from Vivo Y73 (V2059) having Latest Security Update. It is based on Mediatek MT6785V/CD Helio G95 (12 nm) with Android 11, Funtouch 11.1. Here we use Unlock tool Latest version to remove FRP lock from Vivo Y73 Phone.

FRP is an inbuilt data protection feature for all present-day Android smartphones, It protects phones from unauthorized access. The summarization of factory reset protection is FRP and Google provides the feature on Android Lollipop, Marshmallow, Nougat, Pie, Oreo, 10 Q, 11, 12 and most importantly Android 13 versions. The FRP turns On automatically when you have setup a Google Account on your Vivo Y73 Phone. After Reset your phone without removing the Google Account, you have to login with the same Google ID and password that you set up earlier on the device to bypass Google account verification lock on your Phones.

👉 If you have forgotten the Screen Lock/ account information, Then by following these simple step-by-step instructions will help you to format screen lock & remove FRP lock too.

Open Unlock Tool (use latest version),
Enter Username and Password then login,
Now Click on Mediatek tab,
Select MTK Universal options,
Make sure to tick on PRELOADER Auth options
Select Vivo 2023 Security Options from list,
Click on ERASE FRP options,
Power off your Vivo Y73 phone and get ready to press boot key,
Press Volume up + Volume down key at same time and connect usb cable to your PC,
Make sure that you have install new version of Mediatek USB VCom Port driver on your PC,
Now, wait untill you see Erasing FRP OK,
After Format Complete your phone reboot automatically,
First boot take few minutes, after Welcome screen setup your phone,
That's All ! ow your phone is ready for use.

By this way you can remove FRP (Google ID) from Your Vivo Y73 phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Realme 9i RMX- 3941 latest Security Update Format and FRP remove done.

2023-11-04T16:38:00.004+05:45

On this Post, we are going to share how to Format and remove FRP lock from Realme 9i (RMX-3941) having Latest Security and bypass Google Account. It is based on Qualcomm SM6225 Snapdragon 680 4G with Android 11, upgradable to Android 13, Realme UI 4. Here we use Unlock tool Latest version to Format & remove FRP lock from Phone.

👉Step by Step Guides:
Open Unlock Tool (use latest version),
Enter Username and Password then login ,
Now Click on Oppo tab,
Search Realme 9i or RMX-3941,
Choose Model and Click on BROM| EDL Options,
Now click on [EDL]Factory Reset,
Power off your phone and get ready to press boot key,
Press Volume up + Volume down key at same time and connect usb cable to your PC,
Make sure that you have install new version of Qualcomm HS- USB Qloader 9008 driver on your PC,
Now, wait untill you see Erasing FRP OK, Erasing USERDATA OK,
After Format Complete your phone reboot automatically,
First boot take few minutes, after Welcome screen setup your phone,
If your Phone still ask for Google Account (FRP) then use [EDL] Erase FRP options,
You can use Bypass method too for remove FRP Lock.

Mobile Phone manufacturing company makes their system secure by providing Several Security Update & adding different account on every phone which is similar to Iphone icloud lock. Generally FRP/ Account lock occur if the user Factory Reset their phone without signout their account and if the phone Lost and reset by the un- Known person who have found a phone.

FRP is an inbuilt data protection feature for all present-day Android smartphones, It protects phones from unauthorized access.
The summarization of factory reset protection is FRP and Google provides the feature on Android Lollipop, Marshmallow, Nougat, Pie, Oreo, 10 Q, 11, 12 and most importantly Android 13 versions.
The FRP turns On automatically when you have setup a Google Account on your Realme 9i Phone. After Reset your phone without removing the Google Account, you have to login with the same Google ID and password that you set up earlier on the device to bypass Google account verification lock on your Phones.

If you have forgotten the Screen Lock/ account information, Then by following these simple step-by-step instructions will help you to format screen lock & remove FRP lock too.

By this way you can Format and remove Google ID from Your Realme 9i phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Samsung Galaxy M30 (SM-M305F) Binary U8 FRP/ Google Lock remove Done.

2023-06-13T18:59:00.001+05:45

On, this post today we are going to share How to remove/ bypass Google Account (FRP) Lock from Samsung galaxy M30 (SM-M305F) phones. We all know that samsung is providing Security update to their devices regularly due to which we face a lot of problem for removing FRP (Google Account) Lock.

👉Step by Step Guides:

Open Z3x Samsung Tool Pro,

Search Model no. i.e. SM-M305F and select it,

Go to Unlock tab,

Click on Reset FRP [April 2022] options,

Power on your Galaxy M30 phone,

Connect WIFI and Go to Emergency Call,

Dial *#0*# after that you can see Samsung HW test menu,

If you don't see HWTest Menu or *#0*# code not Work then you have to Flash your Phone,

Now Insert USB cable,

On your Phone Screen Allow USB Debugging,

After ADB connection successful Z3x tool try to bypass FRP using their unique method,

Wait until the process complete and your phone reboot automatically,

Now Setup your Phone and Make a Factory Reset from Settings Once,

That's all now your Galaxy M20 is ready to use.

By this way you remove Google ID /FRP Lock From M30 phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Redmi 12c {22120RN86G} Format and FRP (Google Account Bypass) remove done using Infinity CM2.

2023-05-21T18:07:00.004+05:45

On this post, we are going to share how to remove Pattern, Pin, Password and FRP (google id lock) from Redmi 12C (22120RN86G) Smartphone. It is based on Mediatek Helio G85 (MT6769Z) CPU with Android 11-13, MIUI 13.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
On Plaform/ Main Tab select 0_base ,
Now Select Base_v2216 options,
On right side you can find Global Settings,
Make sure here you Un- tick on Local sSLA options,
Click on Identify Device Options,
Power off your Redmi 12C phone and get ready to press boot key,
Press Volume up + Volume down key at same time and connect usb cable to your PC,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
Wait, until you see Boot Done message on screen,
Now remove USB Cable from phone,
Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select FRP [Reset Protection] options,

or,

If you want to format and remove FRP too then select Smart Reset options,

Now, click on Reset Settings/ Format FS button,

Make sure that your phone is in Off Condition,
Press Volume up + Volume down key at same time and connect usb cable to your PC,
You may get error if you don't have new version of Mediatek Preloader driver on your PC,
Be patient, after some time it show:

RESET PROTECTION..OK

That's all ! Your Redmi 12C ( 22120RN86G) Phone is ready to use.. Enjoy.

After formating it may take few minutes to completely boot your Phone.

Note: By this way you can format your Redmi 12C Phone. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Sasung A03 Core (SM-A032F) Format and FRP (google id) remove done using Testpoint.

2023-04-26T11:03:00.002+05:45

On this post, we are going to share how to Format Pin, Pattern, password and remove FRP (google id lock) from Samsung Galaxy A03 Core (SM-A032F) Smartphone. It is based on UniSoc SC9863A CPU with Android 11 (Go Edition). Here we use Infinity CM2 new version Tool i.e. CM2 SP2 V2.14.

👉Step by Step Guides:

Open CM2 SP2 Tool (use latest version),
Click on Platform Tab,
Now you can see defaut setting:
Under CPU [Platform] SC7715_Base,
Choose Model [Type]: SC7715_eMMC_512_NS,
No need to change any settings,
Search A032F FDL File on google,
Download FDL file and Extract it,
Load FDL File on Custom Settings FDL [1] and FDL [2],
Power off your Galaxy A03 core Phone,
Open Back Panel of your phone,
Find Testpoint (TP), picture already included above in this post,
Click on Identify Device options,

Short Golden testpoint to Ground (GND) using Tweezers,
Insert USB cable, After Phone detect remove Tweezers,
Make sure that you have already Installed SPD Unisoc COM port drivers,
Wait until, Boot Done after that remove USB cable,
If you get Boot Error then Tick on DiagMode then retry,
After Boot done, remove USB cable,
Now, Go to Service Tab,
On User Locks/ File System choose Default [Reset Settings + FRP],
Click on Format FS button,

Power Off your phone,
Short Golden testpoint to Ground (GND) using Tweezers,
Remember that we need to press Boot key or Short Testpoint on SPD based phones to detect,
Wait, few moments until you see Wipe OK: UserData, Cache, FRP message,
Now Power On your phone and Setup it,
That's all, Now your A03 Core phone is ready to use ! Enjoy.

By this way you can remove Pin, pattern, Password and FRP (Google Account) Lock Permanently from your Galaxy A03 Core phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Samsung Galaxy J2 Ace (SM-G532G) Google ID (FRP) Lock bypass done.

2023-04-06T19:31:00.004+05:45

On this post, we are going to share how to remove FRP (google id lock) from Samsung Galaxy J2 Prime/ J2 Ace (SM-G532G) Smartphone. It is based on Mediatek MT6737T CPU with Android 6.0 (Marshmallow).

👉Step by Step Guides:

Download and Extract J2 Ace G532G ADB enable File,

You can use Odin 3 tool but here we use Z3X,

Open Z3x Samsung Tool Pro,

Search Model no. i.e. SM-G532G and select it,

Go to Flash tab,

Click on Boot options and load Preloader.tar file,

Click on PDA options and load Boot.tar file,

Power Off your Galaxy J2 Ace phone,

Press Volume Down + Home+ Power key at same time,

When Dialog box appear on mobile screen press Volume up to continue,

Insert USB cable into your phone and connect to PC,

Make sure that Samsung USB Drivers is installed on your PC,

Click on Flash button and wait until the process end,

After flashing ADB enable file phone restart,

It may take few minutes to boot your phone,

If your phone ask for password then just make a Hard Reset,

Wait until your phone is Fully ON,

After you see Welcome Screen ADB enable Options Popup,

On your Phone Screen Allow USB Debugging,

After ADB connection successful use any ADB FRP bypass tool or method what you like,

Here, we use Z3X Samsung Tool Pro tool,

Open Z3x Samsung Tool Pro,

Search Model no. i.e. SM-G532G and select it,

Go to Unlock tab,

Click on ADB Port options and Select ADB device,

Now, Click on Reset FRP options,

After ADB connection successful Z3x tool try to bypass FRP using their unique method,

Wait until the process complete and your phone reboot automatically,

Now you got Home Screen if don't then Setup your Phone manually,

Make a Factory Reset from Settings Once,

That's all now your Galaxy J2 ACE / J2 Prime (SM- G532G)is ready to use.

By this way you remove Google ID /FRP Lock From Galaxy J2 ACE (SM- G532G) phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Vivo Y91C, Y91i (1820) user Lock Format and FRP remove done.

2023-04-06T18:59:00.000+05:45

On this post, we are going to share How to remove Pin, Pattern, Password and FRP (Google Account) lock from Vivo Y91C/ Y91i (1820) Phones. It is based on Mediatek MT6762 Helio P22 CPU with Android version 8.1 (Oreo), Funtouch 4.5. Here we use CM2 MT2 new version tool.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
Select MTK Smartphone- MT65/67/68/81/83/87| Helio G/P/X,
On Work Mode [Model/ Base/ CPU] select Vivo ,
Now Select Y91C options,
On right side you can find Global Settings,
Make sure here you Untick on Meta & Local sSLA options,
Click on Idenfify/ Connect button,
Power Off your Y91c phone,
Insert USB cable on your Computer and Connect Phone,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
After Phone Detect, wait few moments until it show Boot Done,
Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select Smart Reset options,

Now, click on Reset Settings/ Format FS button,
Again Re- connect your phone,
Be patient, after some time it show:

Format Ok: Reset Protection

Format Ok: User Data

Power On your phone, first boot may take few minutes,
After you get Welcome Screen setup your phone,
Now your Vivo Y91C (1820) phone is ready to use.

Note: By this way you can remove Screen Lock and FRP Lock from Vivo Y91C/ Y91i (1820) phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Vivo V15 (1819/ PD1831F) New Security Format and FRP Lock remove via Testpoint.

2023-04-05T13:59:00.001+05:45

On this post, we are going to share How to remove Pin, Pattern, Password and FRP (Google Account) lock from Vivo V15 (1819/ PD1831F) Phones. It is based on Mediatek MT6771 Helio P70 CPU with Android version 9.0 (Pie), Funtouch 9. Here we use CM2 MT2 new version tool.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
Select MTK Smartphone- MT65/67/68/81/83/87| Helio G/P/X,
On Work Mode [Model/ Base/ CPU] select Vivo ,
Now Select Y15- Y30 options,
On right side you can find Global Settings,
Make sure here you Untick on Meta & Local sSLA options,
Click on Idenfify/ Connect button,

Power off your phone and remove Back Panel,
Find Testpoint near CPU, you have to cut Steel cover to get testpoint,
We have post Testpoint Image above in this post for your comfort,
Short Testpoint to Ground and insert USB cable on your Computer,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
After Phone Detect, wait few moments until it show Boot Done,
After Boot it may ask for Re- Connection due to EMI Settings Self Learn,
Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select Smart Reset options,

Now, click on Reset Settings/ Format FS,
Connect your phone by Shorting Testpoint,
Be patient, after some time it show:

Format Ok: Reset Protection

Format Ok: User Data

Power On your phone, first boot may take few minutes,
After you get Welcome Screen setup your phone,
Now your Vivo V15 (1819/ PD1831F) phone is ready to use.

Note: By this way you can remove Screen Lock only from Vivo Vivo V15 (1819/ PD1831F) phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Nokia 3 (TA- 1032) FRP/ Google Account Lock remove done.

2023-04-05T12:42:00.003+05:45

On this post, we are going to share how to remove FRP (Google Account) Lock from Nokia 3 (TA 1032) Smartphone. It is based on Mediatek MT6737 CPU with Android 7.0 (Nougat), upgradable to Android 9.0 (Pie). Here we use Infinity CM2 old version Tool i.e. CM2 MTK V1.58.

Steps by Steps Guide:

Download and Install CM2 MTK V1.58 Supplementary Setup,
Connect CM2 Dongle into your PC,
Open CM2MTK V1.58 Tool,
On Settings TAB ,Under CPU/ Platform/ WorkMode:
Choose SP: Select Model [6571...6797],
Select Nokia 3 options from list,
Go to Service tab and Tick on Read Phone Info,
Click on Identify button,
Power Off your Phone, Insert USB cable,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
After Boot Done process to next step,
Now Select Full Factory Reset (All),
Click on Format/Reset Settings,
Reconnect your Phone via USB cable. Make sure your device is power off,

Wait until the whole process end and you see Done! Message on Screen,
Disconnect your Phone and Power On it,
First boot may take few minutes, be patient,
After you see Welcome Screen, Setup your phone,
That's all, Your Nokia 3 phone is ready to use.

By this way you can remove Google ID Lock from your Nokia 3 (TA- 1032) phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Realme C2 RMX1941 Lock Format and FRP remove done.

2023-01-24T17:33:00.001+05:45

On this post, we are going to share how to remove Pattern, Pin, Password and FRP (google id lock) from Realme C2 RMX1941 Smartphone. It is based on Mediatek Helio P22 (MT6762) CPU with Android 9.0, ColorOS 6 Lite. Here we use Infinity CM2 new version Tool i.e. MT2 v2.39a.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
Select MTK Smartphone- MT65/67/68/81/83/87| Helio G/P/X,
On Work Mode [Model/ Base/ CPU] select Oppo ,
Now choose A1k-A12-A31-A32 options,
On right side you can find Global Settings,
Make sure here you tick on Local SLA options,

Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select Full factory: Forced+ FRP,
Now, click on Reset Settings/ Format FS,
Power off your phone and get ready to press boot key,
Press Volume up + Volume down key at same time and connect usb cable to your PC,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
After few seconds you can see {boot done and reconnect your phone} message,
Remove USB cable, Click on Reset Settings/ Format FS again,
Now press boot key mention above and connect your phone,
Be patient, after some time it show Format ok: Userdata,
That's all ! Your Realme C2 is ready to use.. Enjoy.

By this way you can format your Realme C2 phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Samsung Galaxy J2 Pro (J250F) Binary U1, U2 FRP reset done [No need Youtube].

2022-11-05T17:01:00.007+05:45

On this post, we are going to share how to remove FRP (google id lock) from Samsung Galaxy J2 Pro (J250F) Smartphone. It is based on Qualcomm MSM8917 Snapdragon 425 CPU with Android 7.1, upgradable to Android Version 8.0.

👉Step by Step Guides:

Download and Extract J2 Pro ADB enable File,

You can use Odin 3 tool but here we use Z3X,

Open Z3x Samsung Tool Pro,

Search Model no. i.e. SM-J250F and select it,

Go to Flash tab,

Click on PDA options and load ADB enable file,

Power Off your Galaxy J2 Pro phone,

Press Volume Down + Home+ Power key at same time,

When Dialog box appear on mobile screen press Volume up to continue,

Insert USB cable into your phone and connect to PC,

Make sure that Samsung USB Drivers is installed on your PC,

Click on Flash button and wait until the process end,

After flashing ADB enable file phone restart,

It may take few minutes to boot your phone,

After you see Welcome Screen ADB enable Options Popup,

On your Phone Screen Allow USB Debugging,

After ADB connection successful use any ADB FRP bypass tool or method what you like,

Here, we use old GSM Flasher ADB FRP bypass tool,

Click on Remove FRP options when you see Online Options,

After you see Done message setup your phone to get main Menu,

We recommend you to reset your phone from settings after FRP bypass,

That's all! Your phone is ready to use.

By this way you can remove Google ID /FRP Lock From J2 pro phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

How to Format and unlock FRP Huawei Y7 (TRT- LX2) using Unlock Tool.

2022-10-30T18:07:00.002+05:45

On this post, we are going to share how to remove Pin, Pattern, Password & FRP (google id lock) from Huawei Y7 (TRT- LX2) Smartphone. It is based on Qualcomm MSM8940 Snapdragon 430 with Android 7.0, EMUI 5.1.

👉Step by Step Guides:

Open Unlock Tool (use latest version),
Enter Username and Password then login ,
Now Click on Huawei tab,
Find Huawei Y7 from list and select it,
Go to Testpoint options,
Click on [EDL] Erase FRP or Factory Reset options,
Power Off your Phone and remove Back Panel,

Short two (EDL Point) golden points and connect USB cable,
Make sure that you have installed Qualcomm HS-USB QDLoader 9008 drivers,
After phone detection remove tweezers or jumper cable,
Now, wait untill the process end,
After Format and FRP remove your phone reboot automatically,
First boot take few minutes, after welcome screen setup your phone,
That's All ! Enjoy.

By this way you can Format and remove FRP from Huawei Y7 (TRT LX2) phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Samsung Galaxy A22 5G Android 12 Latest security FRP remove done using Infinity CM2.

2022-10-18T19:09:00.008+05:45

On this post, we are going to share how to remove FRP (google id lock) from Samsung Galaxy A22 5G Smartphone. It is based on Mediatek MT6833 CPU with Android 11 One UI Core 3.1, upgradable to Android Version 12.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
On Plaform/ Main Tab select 0_base ,
Now Select Base_v2112 options,
On right side you can find Global Settings,
Make sure here you Un- tick on Meta and sSLA options,
Click on Identify Device options,
Power off your Galaxy A22 phone,
Insert USB cable, no need to press Boot Key,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
After Boot done you may move to next steps,
Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select FRP [Reset Protection] options,
Now, click on Reset Settings/ Format FS,
Power off your phone and Insert USB cable,
You don't have to press boot key for detect,
Make sure that you have install new version of Mediatek Preloader driver on your PC,

Be patient, after some time it show:

Format OK: RESET PROTECTION,

That's all ! Your Samsung galaxy A22 phone is ready to use.. Enjoy.
After format it may take few minutes to completely boot your Phone,
Now Setup your Phone Offline,
That's All ! Enjoy.

By this way you can format your Samsung Galaxy A22 5G Phone. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Huawei Y3II (LUA-U22) FRP Reset and DL image fail fixed done.

2022-09-17T17:38:00.005+05:45

On this post, we are going to show how to Boot, Format, remove FRP and fix DL image fail on Huawei Y3II (LUA- U22) Phones. It is based on Mediatek (MT6735M -4G MT6582M- 3G) CPU with Android 5.1, EMUI 3.1. Here we use Infinity CM2 new version Tool i.e. CM2 MT2.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
On Plaform/ Main Tab select Huawei ,
Now Select Y3- II options,
On right side you can find Global Settings,
Make sure here you Untick on Meta & Local sSLA options,
Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select FRP options,
Now, click on Reset Settings/ Format FS,
Power off your phone and get ready to press boot key,

Press Volume up + Volume down key at same time and connect USB cable to your PC,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
wait until you see a message i.e. Format OK: RESET PROTECTION,
Power ON your phone,
First boot may take few minutes, be patient,
If you see DL image Fail on your Phone Screen follow below Steps,

On Service Tab find Misc Section,
Power off your Y3ii phone,
Click on FIX DL options,
Press Boot key and wait until process Completed,
Power ON your phone and Complete Setup,
That's all ! Your Phone is ready to use.

By this way you can remove FRP and Fix DL Image Fail on your Huawei (Y3II) phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Benco Y10 Unisoc CPU Boot and Flashing done.

2022-08-24T11:41:00.003+05:45

On this post, we are going to share how to boot and Flash Benco Y10 Smartphone. It is based on Spreadtrum Unisoc SC7731e CPU with Android 9 Go Edition. Here we use Infinity CM2 new version Tool i.e. CM2 SP2 V2.14.

👉Step by Step Guides:

Open CM2 SP2 Tool (use latest version),
Click on Platform Tab,
Under CPU [Platform] select SC7731E_BASE,
Choose Model [Type]: SC7731E_emmc_1GB_RS,
Click on Identify Device options,
Power Off your Benco Y10 phone,
Press Volume Up + Down and Insert USB cable,
Wait until, Boot Done after that remove USB cable,
If you get Boot Error then change Model type and retry,
Now, Go to Flasher Tab,
On blank area right click and load Firmware,
Tick on Update PMT and Re-Sparse options,

Before Flash we recommend you to take Backup of NVM,
Click on Flash button,
Power Off your phone,
Press Volume Up + Down key and insert USB cable,
Remember that we need to press Boot key on SPD based phones to detect,
Make sure that you have already Installed SPD Unisoc COM port drivers,
Wait, few moments until you see Flashing Finished message.
If you face flash error problem then Tick on Format Flash options then try,
Format Flash options destroy IMEI/ Serial No. so we recommend all to take backup of NVM,
If you have backup/ read NVM then you can restore your device Identification,
After Flash power ON your phone,
First boot may take several minutes,
After Welcome Screen appear Setup your phone to get Menu,
If your Phone have FRP Lock then you can remove it from Service Tab,
That's all ! Enjoy.

By this way you can boot and flash your Lava Benco Y10 phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Oppo A1k (CPH1923) Format Pin, Pattern, Password lock.

2022-08-20T17:52:00.003+05:45

On this Post, we are going to share how to Format Oppo A1k having Latest Security. It is based on Mediatek MT6762 Helio P22 with Android Version 9 (Pie), ColorOS 6. Here we use Unlock tool Latest Version to perform this task.

👉Step by Step Guides:

Open Unlock Tool (use latest version),
Enter Username and Password then login ,
Now Click on Oppo tab,
Search Oppo A1k or CPH1923,
Choose Model and Click on Meta Options,
Now click on Factory Reset [2] [EMMC] Options,
Power off your phone and get ready to press boot key,
Press Volume up + Volume down key at same time and connect usb cable to your PC,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
Now, wait untill you see Erasing USERDATA OK,
After Format Complete your phone reboot automatically,
First boot take few minutes, after Welcome screen setup your phone,
If your Phone still ask for Google Account (FRP) then use FRP remove Code or try bypass method.

By this way you can Format and remove Google ID from Your Oppo A1k phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Nokia C2 (TA 1204) user lock Format done.

2022-08-18T16:45:00.008+05:45

On this post, we are going to share how to remove Pin, Pattern, Password from Nokia C2 (TA 1204) Smartphone. It is based on Spreadtrum Unisoc CPU with Android 9.0 (Pie). Here we use Infinity CM2 new version Tool i.e. CM2 SP2 V2.14.

👉Step by Step Guides:

Open CM2 SP2 Tool (use latest version),
Click on Platform Tab,
Under CPU [Platform] select SC7715_BASE,
Choose Model [Type]: SC7715_emmc_512MB_NS,
Now Tick on DiagMode options,
Click on Identify Device,
Power Off your Nokia C2 (TA 1204),
Press Volume UP+ Down Key and Insert USB cable,
Make sure that you have Installed latest version
Wait until, Boot Done after that remove USB cable,
If you get Boot Error then change Model type and retry,
Now, Go to Service Tab,
On User Locks/ File System choose Reset Settings {Format FS},
Click on Format FS button,
Power Off your phone,
Press Volume Up+ Down key and insert USB cable,
Remember that we need to press Boot key on SPD based phones to detect,
Make sure that you have already Installed SPD Unisoc COM port drivers,

Wait, few moments until you see Wipe OK: UserData message,
First boot take few minutes, be patient,
If your phone have Old security update then no need to bypass FRP,
If it ask for Flash mode then use FRP bypass method,
That's all ! your Nokia C2 is ready to use, Enjoy.

By this way you can remove Pin, Pattern, Password Permanently from your Nokia C2 TA 1204 phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Oppo A5s latest security Format user lock and FRP remove.

2022-08-13T15:33:00.004+05:45

On this Post, we are going to share how to Format Oppo A5s having Latest Security and bypass Google Account. It is based on Mediatek MT6765 Helio P35 with Android Version 8.1 (Oreo), ColorOS 5.2. Here we use Unlock tool Latest Version to perform this task.

👉Step by Step Guides:

Open Unlock Tool (use latest version),
Enter Username and Password then login ,
Now Click on Oppo tab,
Search Oppo A5s or CPH1909/ CPH1912,
Choose Model and Click on BROM| EDL Options,
Now click on [BROM]Factory Reset +FRP Options,
Power off your phone and get ready to press boot key,
Press Volume up + Volume down key at same time and connect usb cable to your PC,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
Now, wait untill you see Erasing FRP OK, Erasing USERDATA OK,
After Format Complete your phone reboot automatically,
First boot take few minutes, after Welcome screen setup your phone,
If your Phone still ask for Google Account (FRP) then use FRP remove Code or try bypass method.

By this way you can Format and remove Google ID from Your Oppo A5s phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Vivo Y83 Pro (1726) User Data Safe only Pattern Lock remove done.

2022-08-09T19:47:00.002+05:45

On this post, we are going to share How to remove Pin, Pattern, Password lock without Data Loss from Vivo Y83 Pro (1726) Phones. It is based on Mediatek MT6762 Helio P22 CPU with Android version 8.1 (Oreo), Funtouch 4. Here we use CM2 MT2 new version tool.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
On Plaform/ Main Tab select 0_base ,
Now Select BASE_v2112 options,
On right side you can find Global Settings,
Make sure here you Untick on Meta & Local sSLA options,
Click on Idenfify/ Connect button,
Power off your phone and insert USB cable on your Computer,
No need to press Boot Key for detection,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
After Phone Detect, wait few moments until it show Boot Done,
Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select Smart Reset DATA SAFE options,

Now, click on Reset Settings/ Format FS,
If you see any warning message then ignore it,
Be patient, after some time it show:

SafeFormat Ok: VIVO

That's all ! Your Vivo Y83 pro (1726) is ready to use.. Enjoy.

Note: By this way you can remove Screen Lock only from Vivo Y83 Pro phones without data loss. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Tecno Pova FRP (Google Account) remove done using Infinity CM2 Dongle.

2022-07-30T18:28:00.001+05:45

On this post, we are going to share how to remove FRP (Google ID) from Tecno Pova Smartphone. It is based on Mediatek Helio G80 (MT6769V/ CU) CPU with Android 10, HIOS 7.0.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
On Plaform/ Main Tab select Tecno,
Now Select RAPHEAL_V2 options,
On right side you can find Global Settings,
Make sure here you Untick on Meta & Local sSLA options,
Click on Identify/ Connect optons,
Power Off your phone and insert USB cable,
No need to Press Boot key for detection,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
After Boot done remove USB from your Computer,
Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select FRP [Reset protection] options,

Now, click on Reset Settings/ Format FS,
Power off your phone and get ready to insert USB Cable,
Be patient, after some time it show:

Format: RESET PROTECTION

First Boot may take several minutes,
Now Setup your phone to get Menu,
That's all ! Your Tecno Pova phone is ready to use.. Enjoy.

By this way you can remove FRP (Google Account) from Tecno Pova phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Oppo A83 (CPH1729) and A83T (CPH1827) user lock Format done.

2022-07-11T18:47:00.003+05:45

On this post, we are going to share how to remove PIN, Pattern, Password Lock from Oppo A83 and A83T Smartphone. It is based on Mediatek MT6763 Helio P23 CPU with Android 7.1, ColorOS 3.2.

👉Step by Step Guides:

Open Unlock Tool (use latest version),
Enter Username and Password then login ,
Now Click on Oppo tab,
Find Oppo A83/ A83T CPH 1729 & CPH 1827 from list and select it,
Go to META options,
Select options as you want:
If you want save data then choose Safe Format,
You can try Factory reset 1-5 options,
Here we select FACTORY RESET [2] [EMMC],
Power off your phone and get ready to press boot key,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
Press Volume up + Volume down key at same time and connect USB cable to your PC,
Be patient, after some time it show: Erasing USERDATA.. OK,
That's all ! Your Oppo A83/ A83T Phone is ready to use,
After format it may take few minutes to completely boot your Phone,
When you get Welcome screen setup your phone,
If your Phone have Google Account (FRP) then use FRP remove Method/ Code or remove using Supported Box/ Dongles..

Note: By this way you can format your Oppo A83/ A83T Phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Samsung Galaxy A20 (SM-A205F) FRP/ Google ID Lock remove done latest Security.

2022-07-08T11:11:00.002+05:45

On, this post today we are going to share How to remove/ bypass Google Account (FRP) Lock from Samsung galaxy A20 (SM-A205F) phones. We all know that samsung is providing Security update to their devices regularly due to which we face alot of problem for removing FRP Lock.

👉Step by Step Guides:

Open Z3x Samsung Tool Pro,

Search Model no. i.e. SM-A205F and select it,

Go to Unlock tab,

Click on Reset FRP [April 2022] options,

Power on your Galaxy A20 phone,

Connect WIFI and Go to Emergency Call,

Dial *#0*# after that you can see Samsung HW test menu,

If you don't see HWTest Menu or *#0*# code not Work then you have to Flash your Phone,

Now Insert USB cable,

On your Phone Screen Allow USB Debugging,

After ADB connection successful Z3x tool try to bypass FRP using their unique method,

Wait until the process complete and your phone reboot automatically,

Now Setup your Phone and Make a Factory Reset from Settings Once,

That's all now your Galaxy A20 is ready to use.

By this way you remove Google ID /FRP Lock From A20 phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

Vivo Y15 [PD1901] Format Pin, Password, Pattern reset done.

2022-07-07T18:23:00.005+05:45

On this post, we are going to share how to remove Pattern, Pin, Password from Vivo Y15 (1901) Smartphone. It is based on Mediatek Helio P22 (MT6765) CPU with Android 9.0, Funtouch 9.

👉Step by Step Guides:

Open CM2 MT2 Tool (use latest version),
On Plaform/ Main Tab select Vivo ,
Now Select SEC_MT6765 options,
On right side you can find Global Settings,
Make sure here you Untick on Meta & Local sSLA options,
Go to Service Tab (down side 4th tab),
On Format FS/ Reset Settings select Smart Reset options,
Now, click on Reset Settings/ Format FS,
Power off your phone and get ready to press boot key,
Press Volume up + Volume down key at same time and connect usb cable to your PC,
Make sure that you have install new version of Mediatek Preloader driver on your PC,
After few seconds you can see {boot done and reconnect your phone} message,
Remove USB cable, Click on Reset Settings/ Format FS again,

Now press boot key mention above and connect your phone,

Be patient, after some time it show:

Format RESET PROTECTION,
Format OK: USERDATA
Format OK: CACHE

That's all ! Your Vivo Y15 (1901) is ready to use.. Enjoy.

Note: By this way you can format your Vivo Y15 (1901) phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.