CAR MODIFICATIONS

AUDI A4 YELOW Modification

noreply@blogger.com (fatchay) — Tue, 19 Oct 2010 14:10:31 PDT

FORD MUSTANG BOSS 302 TO TRACK-READY CONDITION

noreply@blogger.com (fatchay) — Tue, 19 Oct 2010 14:08:23 PDT

The upcoming 2012 Ford Mustang Boss 302 is a hot piece of metal, especially with its 440-horsepower 5.0-liter V-8 rumbling beneath the hood. For customers looking for a complete track-day tool, however, there is the option of the limited-production Laguna Seca package.

In addition to altering the chassis and suspension, the Ford team shaved weight by relieving the Boss 302 of its rear seat. Depending on overall setup, boosting the level of aerodynamic drag is a necessity for vehicles destined for road courses and the Laguna Seca package fulfills that need with an aggressive front splitter and larger rear wing. The front splitter was adapted from an actual Ford Racing part and sits low to the ground to move airflow under and around the car. Paired with the remaining aero pieces, Ford says the package alone can generate as much as 90 pounds of downforce at 140 mph, not an insubstantial amount and crucial to accomplishing a hot lap.

With more grip and better track manners, the Laguna Seca package-equipped Boss 302 can do over 1.03 g of lateral acceleration and racers can expect a 1-to-2-second improvement in lap times over the regular Boss on a typical track. This is the modern-day interpretation of the race-winning 1970 Boss 302, and painted either Black or Ingot Silver with a red roof panel, this version shines.

Audi A8 Razor GTR-10 Modification

noreply@blogger.com (fatchay) — Tue, 19 Oct 2010 14:07:04 PDT

Houses Modification to modify the total German PPI Automotive Audi R8 V10 to produce performance and special appearances. The more exclusive because the car is named PPI Razor GTR-10 was produced limited.

R8 exterior look sharper thanks to the package body kit, including front bumper, side skirts, rear fenders, rear bumper, rear spoiler and diffuser. Lined hood carbon fiber material and air intake hole. Including the back-coated carbon fiber.
In fact, such as doors, roof pillars, side skirts and front bumper made of genuine carbon fiber. The use of this material can contribute up to 250 kg weight reduction.

The use of carbon fiber also spread up into the cabin. Look at the handbrake lever, door protector panel, some of the dashboard, door trim and center console. The chair also thanks to the use of lightweight carbon fiber.

Automatic, weight reduction also contributed to improved performance. Standard V10 engine has been improved strength to 601 PS (previously 525 PS) and peak torque of 565 Nm (previously 529 Nm). With modifications to the R-Tronic transmission, the ability to accelerate from 0-100 lm / hour getting cut, from 3.9 seconds to 3.2 seconds. Maximum speed is also increased from 315 km / h to 335 km / hour.

Forward the overflow of energy to the highway, four-wheel mounted MAG11 PPI aluminum alloy wheels measuring 9x19 inches in front and 12x20 inches in the rear. Velgnya wrapped in Michelin Pilot Sport 2, 245/35 19 (front) and 325/25 20 (rear).

Maybach Landaulet Concept

noreply@blogger.com (fatchay) — Sat, 04 Sep 2010 07:12:51 PDT

With this study of an open-top landaulet, Maybach has re-enlivened the great art of building majestic automobiles. True to the tradition of exclusive landaulets, the roof of this sparkling white one-off study can be opened fully at the rear, while the chauffeur's compartment remains completely enclosed. The passengers are then able to enjoy the clear, blue sky above. Seated in opulent armchairs upholstered in white, they are treated to a majestic open-air experience currently unrivalled by any other automobile in an environment of the utmost luxury and exquisite. Romance close to the heart of nature is harmoniously combined with the ultimate in comfort and technological sophistication. With this unique study, Maybach is once again demonstrating its expertise in building the world's most exclusive luxury cars.

Large folding roof for passengers in the rear
In technical terms the Landaulet study is based on the Maybach 62 S - which can claim to be the world's most powerful series-produced chauffeured saloon. Maybach technicians have removed the rear roof module in order to afford passengers an unobstructed view of the sky above. The side walls remain, and have merely been invisibly reinforced with an integral tubular steel structure. As these measures have not altered the silhouette of the luxury saloon, the generously dimensioned doors and the complete interior with its reclining seats remain unchanged.

When closed the black soft-top of the Landaulet rests on the frame formed by the roof bows, and is wind and weather-proof. When requested by the passengers, the chauffeur operates a switch in the centre console. The roof then opens electro-hydraulically and is gently deposited on the parcel shelf in the rear, together with its integral of single-layer safety glass. Opening and closing the roof takes 16 seconds. The chauffeur is able to enclose the folded roof with a fitted cover, which both conceals the roof mechanism from view and completes the overall picture of outstanding elegance.

White paintwork and wheels
This impression is accentuated by white paintwork of the study, an exclusive finish named antigua white. Visual highlights are provided by 20-inch wheels specially designed for the Landaulet study. These are also painted in white with high-sheen spokes, and are accompanied by white indicators in the front and rear light clusters in dark red.

Black for the chauffeur, white for the passengers
In addition, the already luxurious driver's compartment of the successful Maybach 62 S has been enhanced in a number of important respects. All the interior trim is now surfaced in black piano lacquer, and for the extensive leather appointments Maybach has used particularly exclusive, glossy stromboli black leather.

In contrast Maybach has fitted the passenger compartment almost completely in exquisite seychelleswhite leather. The footwell and roof liner of this high-end luxury landaulet are also in white - the floor is carpeted in white velour and the roof lined with white fabric. A dramatic contrast is provided by inserts and decorative trim in glossy, black piano lacquer or exclusive black granite with numerous gold inclusions.

Generous spaciousness and first-class comfort
Outstanding comfort is assured by the generous spaciousness of the rear, which the Landaulet study has adopted unchanged from the Maybach 62. Passengers are welcomed into the interior by two large, single seats. These elegant seats also allow even very tall passengers to enjoy a reclining position which travellers normally only encounter in the first-class armchairs of modern passenger jets.

The study is designed as a chauffeured vehicle and features a partition. The upper section of the partition is a glass panel which the passengers can render opaque at the touch of a button, thanks to a liquid crystal membrane embedded in the glass.

Two ultra-modern automatic climate control systems, whose parameters have been adapted to the Landaulet study, ensure that open-air travel remains a pleasure even under adverse climatic conditions.

State-of-the-art entertainment and communications
As in the Maybach 62 S, the rear console is the centrepiece for entertainment, communications and travelling pleasure. This is where Maybach engineers have grouped everything relating to the entertainment and pleasure of the rear-seat passengers: a DVD-player, six CD-changer, a cooler compartment with its own electric compressor and an intelligent system which holds glasses, goblets and champagne bottles safely in position.

Engine and suspension
The Maybach Landaulet study is powered by the uprated V12 engine which Maybach engineers have developed further for the Maybach 57 S and Maybach 62 S together with the specialists at Mercedes-AMG. Thanks to twin turbochargers and water intercooling, the V12 develops a maximum output of 450 kW/612 hp from a displacement of 5980 cubic centimetres. This is continuously available between 4800 and 5100 rpm, and the engine also delivers an impressive maximum torque of 1000 newton metres between 2000 and 4000 rpm.

The electronically controlled air suspension AIRMATIC DC (Dual Control) and the Adaptive Damping System (ADS II) endow the Landaulet with outstanding levels of ride comfort, at the same time demonstrating that even a prestigious vehicle such as this can exhibit extraordinary agility and dynamic performance.

In addition to large, internally ventilated brake discs - with twin callipers at the front - both the study and the Maybach 62 S are equipped with two electro-hydraulic Sensotronic Brake Control (SBC™) braking systems working in tandem. Together with ESP®, ASR, ABS and Brake Assist, this provides the Landaulet study with the very latest in effective, high-tech handling control systems.

Innovative technology from the sister-brand Mercedes-Benz
Like all Maybach saloons, the Landaulet also benefits from the unrivalled experience of the sister-brand Mercedes-Benz in the development and production of high-quality cars in the luxury segment. Important innovations from Mercedes-Benz, successfully developed further for the Maybach saloons, are standard equipment in every Maybach and are of course also on board the Landaulet study - examples include the electronically controlled air suspension AIRMATIC DC (Dual Control), LINGUATRONIC voice control and the control and display system COMAND APS.

Peugeot 308 RC Z Concept

noreply@blogger.com (fatchay) — Sat, 04 Sep 2010 07:11:02 PDT

The 308 RC Z concept car is a new Peugeot interpretation of driving pleasure. The car is a 2+2 coupé, with true versatility and at the same time a style that is modern, original and well-balanced.

Using the 308 as a blueprint.
* to adopt a particularly stylish front design;
* to share a large number of components already developed for the hatchback, therefore simplifying the production of this coupé;
* to capitalise on the hatchback's strong points, which become even more effective in the 308 RC Z concept car (for example, suspension components, wheels, certain equipment items and the fl owing design of the fascia panel).

Its taut lines and streamlined design ensure an efficient aerodynamic specification (a SCx of just 0.65), improving performance, fuel consumption and therefore helping to protect the environment due to the reduced CO2 emissions.
With a length of 4.276 (same as the hatchback), a width of 1.840 (25 mm more than the hatchback) and a height of only 1.320 m, the proportions of the 308 RC Z concept car combines a very dynamic design with a high level of road holding.

Exterior styling
The particularly stylish design of the front of the 308 blends brilliantly with the proportions of this concept car.

From the side, the vehicle displays a strong profile with its prominent front wings, deeply sculpted sides, and particularly generous rear wings. The doors raise the visual profile, creating a link between the sloping front design and the curvaceous rear design.
The end result, firmly sitting on 19 inch wheels, suggests power, strength and dynamism, like an animal ready to pounce.

The specific shape of the rear window required the use of polycarbonate instead of glass. The two curved sections emerging from the roof give the vehicle an original appearance and contribute greatly to its aerodynamic efficiency. The design of the tailgate assists the airfl ow over the rear of the vehicle, while the shape of the rear of the vehicle provides sufficient down force onto the rear suspension to eliminate the need for a rear spoiler, thereby preserving the purity of the vehicle's lines.
The Peugeot Lion badge is displayed in a U shaped panel in the centre of the tailgate, and is backlit at night. In addition, simply by pressing the lion badge, opens the tailgate.

The rear lights are mounted fl ush with the car's wide rear wings. Fitted with light emitting diodes (LEDs), they have a ruby red finish combined with a stylised translucent section which contains the direction indicator.
Two centrally mounted exhaust pipes are integrated into the wraparound lower rear panel. To achieve this, the rear exhaust silencer has been located in a transverse position where it also serves as an aerodynamic diffuser, but still allows sufficient space for the storage of a spare wheel.
The rich metallic grey exterior body colour is created by a special process using finely milled metallic particles. This gives the impression that the vehicle has been formed from a single block of metal, enhancing the purity of the car's lines and the styling of the bodywork to remarkable effect.
The interior
The fascia panel in 308 RC Z concept car has been taken directly from the hatchback. A pure, elegant and fl uid design, it allows a particularly clear view of the outside thanks to its sloping design which complements the vehicle's large front windscreen. It offers a high level of interior brightness, improved visibility and an overwhelming feeling of space.

The entire fascia panel is trimmed in leather, while the use of chrome, aluminium and black lacquered fittings creates a sporty, upmarket impression.

Another sign of the vehicle's exclusive nature are the bucket type front seats with polished aluminium eyelets, the style of which is also refl ected in the design of the inner door panels. The ergonomically designed driver's seat ensures the driver is firmly in control of the vehicle.
At the rear there are two occasional seats trimmed in leather, both of which can be folded. The vehicle therefore offers real modularity and great versatility.

The engine
The 308 RC Z concept car is powered by a 1.6 litre THP engine developed from the EP6DTS engine designed and developed via the collaboration between PSA Peugeot Citroën and the BMW Group, where it is fitted to the 207 RC, with a power output of 128 kW (˜175 bhp).
However, the 1.6 litre THP engine, as a result of new engine management software specially developed for the concept car, now produces a maximum power of 160 kW (˜218 bhp).
It is characterised by incredible fl exibility, thanks to its maximum torque of 280 Nm produced at a low engine speed (300 Nm in overboost). These values ensure remarkable responsiveness under all driving conditions.

Its innovative Twin-Scroll turbocharger optimally pairs the exhaust gases fl owing from two cylinders to ensure maximum fl ow onto the turbine, while its high-pressure direct petrol injection system improves combustion and overall engine efficiency.

The engine is coupled with an entirely new 6 speed manual gearbox.
This unit helps to give the 308 RC Z a particularly efficient compromise between performance and fuel consumption. For example, its maximum speed of 235 km/h is attained in sixth gear and it takes only 7.0 seconds to go from 0 to 100 km/h. In gear acceleration is impressive: only 7.5 seconds in 5th gear from 80 to 120 km/h. At the same time, fuel consumption is very reasonable with 6.7 litres/100 km in the combined cycle, or just 160 g/km of CO2 emissions.

Wheels and suspension
In the tradition of Peugeot concept cars there is a linked front suspension employing the widespread use of aluminium to reduce the vehicle's overall weight.
This set up ensures exceptional road holding, excellent steering accuracy and great feedback intensifying the overall driving sensation.
The rear suspension, derived from the hatchback, consists of a torsion-beam, two rear suspension arms and an integral anti-roll bar. It has been specially modified to take account of the wider vehicle tracks. Indeed the front and rear tracks have been increased by 59 mm compared to the hatchback, and also the fitment of wider tyres, ensures maximum body rigidity, precision and vehicle stability.
Braking relies on large (360 mm) diameter ventilated discs at the front with four piston calipers.
Polished split rim 19'' alloy wheels are fitted with Michelin Pilot Sport PS2 245/40 R19 tyres.

Safety
Even for a unique model, Peugeot's designers do everything they can to make their dreams become a reality and leave nothing to chance. Safety is also made a top priority.
While the exceptional road holding of the 308 RC Z concept car forms the basis of its primary safety, it is supplemented by safety equipment borrowed from the 308 hatchback, Lane Departure Warning System (LDWS) and the directional bi-Xenon headlamps.

Exotic Volkswagen EcoRacer Prototype Impressive Performance

noreply@blogger.com (fatchay) — Sun, 29 Aug 2010 06:00:15 PDT

Exotic Volkswagen EcoRacer Prototype impressive performance

At the Tokyo Motor Show (22 October to 6 November) Volkswagen are presenting a ancestor that could able-bodied accomplish history as the best economical the sports car of its time. Its basal data: boilerplate ammunition burning of 3.4 litres for 100 km, a top acceleration of 230 kph. Its name: EcoRacer. Thanks to its carbon-fibre (CFP) bodywork, this sports car with its centrally amid agent weighs in at alone 850 kilograms, and accelerates from 0 to 100 kph in aloof 6.3 seconds. Powered by a anew developed 100-kW turbo-charged agent of the abutting generation, it offers a advanced amalgam of ascetic abridgement and absorbing performance. 230 kph, 6.3 seconds, 3.4 litres - these basic statistics are as abnormal as they are fascinating. But the cold of development was not to breach records. With the EcoRacer, the ambition was rather to actualize a analysis agent that affiliated the elements of abridgement and achievement beneath a actual emotionally styled "roof".

Volkswagen Golf 2010

noreply@blogger.com (fatchay) — Sun, 29 Aug 2010 05:59:25 PDT

Volkswagen Golf 2010

Volkswagen Golf 2010 Cars

Volkswagen Golf 2010 Wallpapers

Maserati Granturismo

noreply@blogger.com (fatchay) — Sun, 29 Aug 2010 06:01:42 PDT

Maserati Granturismo

Maserati Granturismo Cars

Maserati Granturismo

Maserati Granturismo Wallpapers

Saab Aero X Concept

noreply@blogger.com (fatchay) — Sun, 29 Aug 2010 06:01:01 PDT

Saab Aero X Concept

Inspired by Saab's aviation heritage and Scandinavian roots

Previews more progressive design language
Innovative opening canopy eliminates doors and windshield pillars
"Green Power" from 400 hp BioPower engine using 100 percent ethanol fuel
All-wheel drive, carbon fiber bodywork
North American debut at New York auto show in April

The Saab Aero X concept harnesses the power of Saab's aviation and Scandinavian roots to make a unique statement in performance car design. Conceived as a study to explore future design directions, its innovative features preview the development of an enhanced design language that will inspire future Saab products.

As one would expect from Saab, this dynamic two-seater sports coupe breaks with automotive design convention both outside and inside.

First, there are no doors... or windshield pillars. That's because the Saab Aero X adopts a cockpit canopy, just as you would see on a jet aircraft. It offers the Aero X pilot full 180 degree vision, and also facilitates entry and exit from its low-slung cabin.

Thrust for the all-wheel-drive Saab Aero X also comes from a powerplant with a difference. The 400-hp, twin-turbo, BioPower V6 engine is fueled entirely by ethanol, a sustainable energy source that is kinder to the environment by cutting fossil CO2 emissions. The "green power" of this advanced engine gives new meaning to the phrase "performance with responsibility."

Inside, the Saab Aero X's cockpit also adds a new dimension to clean Scandinavian interior design by completely eliminating conventional dials and buttons. Instead, Saab has applied techniques derived from Swedish glass and precision instrument making, displaying data on glass-like acrylic 'clear zones' in graphic 3-D images.
Saab Aero X Concept

All exterior and interior lighting is by LED (light-emitting diode), which has given the design team new freedom to exploit the compact packaging benefits of a technology that will be featured increasingly in future Saab products.

With weight-saving carbon fiber bodywork, a lightweight powertrain, electronically controlled suspension and all-wheel drive, the Saab Aero X is an exciting driver's car that promises a level of performance to match its looks. Computer simulations anticipate zero to 60mph/100 kph in just 4.9 seconds and a top speed of 155 mph/250 kph (limited).

Despite being so tightly driver-focused, the Aero X still offers surprising practicality, again, a quality you would expect to find in all Saab designs. That dramatically sculpted tail conceals a useful twin storage facility, with a conventional hatch opening and sliding drawer underneath.

"This study shows how the strength of the Saab brand heritage can inspire bold, innovative design," says Bryan Nesbitt, Executive Director, GM Design Europe. "As we move forward with new Saab products, we will remain focused on carefully cultivating this brand equity in the context of Scandinavian design values."

"The concept shows the exciting possibilities that are open to us as we evolve a more progressive design language for the brand," says Jan Åke Jonsson, Saab Automobile's Managing Director. "Our designers, engineers and marketers in Sweden are ideally placed to nurture and communicate the unique DNA of the Saab brand. Their work will ensure that future product proposals express core qualities, such as progressive design, sporty performance and emotional functionality, in a way that is specific to Saab."

The Saab Aero X is the latest in a series of concepts from Saab, each accentuating different brand qualities. These include the 'four-dimensional' 9X (IAA Frankfurt 2001), the 9-3X Cross-over Coupe (Detroit 2002) and the 9-3 Sport Hatch (IAA Frankfurt 2003).

Seat Formula Concept

noreply@blogger.com (fatchay) — Sun, 29 Aug 2010 06:01:22 PDT

Seat Formula Concept

Seat Formula Concept was presented at the 69th Geneva Motor Show in 1999. It was a two-seater sports car with featured a removable roof and was powered by a mid-mounted turbocharged 2-liter engine developing 240 hp. The semi-automatic six-speed gearbox came with two paddles on the steering wheel for faster gear changes and a traditional stick-shift as well. The Seat Formula Concept is capable of reaching 235 km/h and making the 0-100 km/h sprint in less than 5 seconds.

Sharpie Art Car

noreply@blogger.com (fatchay) — Tue, 17 Aug 2010 09:31:04 PDT

Some time ago I posted this amazing Sharpie Lamborghini Gallardo then again with another BWM art car by Travis Todd right after. Today I found a Sharpie Miata post on Spec Miata with another cool art car and a link to ACC. I decided that there could be more sharpie stuff out there so I dug a little deeper and found a few more interesting sharpie vehicles.

Lamborghini Sharpie Art Car

Miata Sharpie Art Car "Mighty" Mike Niemann

Dark BMW Sharpie Art Car by Travis Todd

Ford Torus Sharpie Art Car

Mitsubishi Sharpie Budget Mod (almost there:)

Kool Aid Car - Stay Cool in a Crazy Ride

noreply@blogger.com (fatchay) — Tue, 17 Aug 2010 09:27:03 PDT

Get ready because this ride is going to be a bit crazy with the Kool-Aid Car. Do not fear because as long as you keep drinking Kool-Aid you will remain calm and cool at all times. So get in, fasten your seat belts, turn up the volume grab your self a cup of your favorite flavor Kool-Aid and enjoy the ride.

Kool-Aid Car Front

Kool-Aid Car Rear

Incredible Pakistany Art Cars Hit the Road

noreply@blogger.com (fatchay) — Tue, 17 Aug 2010 09:22:20 PDT

Jeep Cherokee

noreply@blogger.com (fatchay) — Sat, 07 Aug 2010 16:25:00 PDT

Jeep Cherokee, 2008

The new Cherokee will launch in the UK in May 2008 with a choice of manual or automatic transmission and one equipment level - Jeep Cherokee Limited.

Inside, the all-new Jeep Cherokee Limited will feature a Luxury Leather Package which includes supple leather-trimmed seats featuring French-seam stitching. The passenger grab handle, console-storage cover and front-door trim panels also receive the same leather treatment, complete with the French-seam stitching. The parking brake handle and transmission shifter receive exclusive leather treatment, brushed stainless-steel door-sill plates welcome passengers, and the floor carpet is augmented with premium floor mats all as standard.

Classic Jeep Design
The exterior design of the all-new Jeep Cherokee takes its cues directly from the Jeep brand's legendary 65-plus years of heritage. Familiar design characteristics, such as the clamshell bonnet, seven-slot grille, trapezoidal wheel openings and rugged stance provide the vehicle with its classic Jeep style.

Standard across the range is the signature seven-slot grille. A front-end module that spans across the vehicle houses the grille and headlamp system in a single unit. The structure is designed to meet pedestrian impact and other crash standards for all markets. Front lamp modules contain halogen headlamps and standard fog lamps. The front fascia is body colour on all vehicles.

At the side of the vehicle, deep body sections and a high beltline produce a tough, strong and capable appearance. A wheels-to-the-corner stance and dramatic trapezoidal-shaped wheel arches enhance the vehicle's side profile. Wheel arches are now painted body colour on all Cherokee models. Bright chrome side mouldings accent the Limited model. The Cherokee name is distinctly stamped into the side mouldings. A mould-in-colour side vent featuring seven slots is placed at the side of the vehicle's elongated bonnet where it meets the wing, door and A-pillar. The spare tyre is now placed underneath the vehicle, allowing for increased interior space.

Industry-Exclusive Sky Slider Full-Open Canvas Roof
The all-new Jeep Cherokee brings the open-air experience with the industry-exclusive Sky Slider full-length open canvas roof. The Sky Slider roof can be moved to several positions, including full forward, full rear or partially open to any position in-between with a convenient express one-touch switch.

The Sky Slider roof is made of a reinforced acrylic cloth, similar to a convertible top, which is weather-resistant and leak-proof. The top panel nests into a weather strip seal to help minimise wind noise. The roof utilises anti-pinch software that will prevent the roof from moving should it detect an object in its path. The Sky Slider roof is an optional feature.

Functional Interior Space with More Available Amenities
The interior of the all-new Jeep Cherokee delivers simple, functional styling and provides customers with ample storage and organisational space.
Standard 60/40 split fold-flat rear seats and a fold-flat front-passenger seat are perfect for loading and hauling. The rear seats also incorporate a recline feature for more adjustment for passengers. The front and rear seats feature wide inserts and heavy bolstering designed to cradle occupants for a secure feeling. The seats have tall, square shoulders, and the bottom cushion has been lengthened for better thigh support. Leather, heated seats are standard on the Limited model.

A 4-spoke steering wheel provides the all-new Jeep Cherokee with a generous tactile heft and feel. Standard is a leather-wrapped steering wheel with wheel-mounted Electronic Vehicle Information Centre (EVIC) on the face and audio controls conveniently located on the rear of the wheel. A tilt steering column is now standard on all models.

A new two-tone instrument panel treatment gives the vehicle a feeling of spaciousness. The Jeep Cherokee features a four-gauge instrument cluster with clear white on black graphics with orange pointers and an integrated vehicle information centre.

The centre stack neatly houses the climate controls, vents, radio and switch bank. For the first time, Cherokee will now be available with the optional MyGIG Multimedia Infotainment System and eight premium speakers and a subwoofer. Standard on all Cherokee models is an all-new automatic temperature-control system with cabin air filtration.

Audio and Navigation Systems
The Jeep Cherokee is available with a variety of audio systems, and will offer the innovative MyGIG Multimedia Infotainment System that features built-in navigation, audio, entertainment and communication systems as an optional extra. MyGIG allows customers to use touch screen or voice commands to control features, and includes a 20-gigabyte hard drive where music and photos can be stored. An integrated music jukebox supports Gracenote music-file management to add song, artist and album information to the music files automatically. Space is reserved on the hard drive for approximately 1,600 songs - more than 100 hours of music. The system also includes a voice-memo recorder feature.

The voice dialogue system recognizes more than 100,000 words. The navigation system features both 2-D and 3-D bird's-eye views of roads and multiple route calculation alternatives. Maps and guidance are displayed on a motorized, flip-down 6.5-inch thin-film-transistor (TFT) colour display. The TFT screen uses an active matrix for viewing from angles up to 180 degrees - perfect for the centre of an instrument panel.

All radio head units in the Cherokee feature a 3.5 millimetre audio input jack for easy connection to an MP3 player. The Infinity Premium Sound System offers a total of nine speakers, which includes one 6.5-inch subwoofer. It also includes an eight-channel amplifier producing 368 watts of power.

Cargo and Utility
There are several storage and convenience features designed into Jeep Cherokee's spacious rear cargo area.
Both left and right trim panels have cargo tie-down loops for securing items to the load floor. The left trim panel houses a concealed compartment for jack storage and tools.

Economical and Powerful 2.8L CRD
The Jeep Cherokee is also available with a new 2.8-litre DOHC 16-valve common-rail turbo diesel engine. With its Variable Geometry Turbocharger (VGT) and rapid throttle response, this engine enables the Cherokee to claim best-in-class torque of 460 Nm (339 lb.-ft.) at 2,000 rpm with the five-speed automatic transmission, and best-in-class towing capacity of up to 2,800 kilograms and a driving range of 450 miles. Maximum power is 130 kW (177 hp DIN) at 3,800 rpm.

The new 2.8-litre CRD engine also provides a weight savings of approximately 6 per cent, achieves increased cam belt life (durability now of 140,000 kilometres) and features Piezo fuel injectors and a 2000-bar fuel system to improve fuel-system speed and control.

A forged steel crankshaft now features eight counterweights compared to the prior crankshaft which had four. A structural oil pan assists in reducing noise, vibration and harshness on the new engine.

All-new Full-time Four-wheel-drive System
The all-new Selec-Trac II full-time four-wheel-drive system is standard on all Jeep Cherokee models. The Selec-Trac II four-wheel-drive system is a full-time, active on-demand system that anticipates and prevents wheel slip before it occurs. It is ideal for a wide range of road settings, including dry pavement conditions not typically suited for conventional part-time four-wheel-drive systems.

This premium system offers a 4WD Auto mode that is just right for full-time driving. When driving in 4WD Auto mode, the system uses vehicle sensors to adjust and redirect torque between the front and rear axles based upon real-time driving conditions, providing the vehicle with responsive tractive performance.

Electric shifting between 2WD, 4WD Auto and 4WD Low is accomplished with a console-mounted switch. A pushpin button is used to shift to Neutral mode.

Jeep-engineered Hill Descent Control
The same Jeep-engineered Hill Descent Control system introduced on the new Jeep Grand Cherokee is now available on the all-new Cherokee (with an automatic gearbox only). The system was designed to mimic the downhill control and flexibility afforded by the ultra-low gearing found in a Jeep Wrangler Rubicon with its 4:1 ratio transfer case and six-speed manual transmission. This gearing provides for six speeds of controlled hill descent.

Operational in the 4WD Low position, Hill Descent Control provides downhill assistance at a controlled rate of speed with more precision and smoother operation than simply using the brakes. By means of electronic brake control, Hill Descent Control supplements the gear reduction and engine braking that a traditional mechanical low-range transfer case provides. Unlike most of its competitors, the new Jeep Cherokee with Hill Descent Control offers extremely smooth transitions between speeds and allows the driver to use the throttle and brakes without turning the system off, with a smooth and controlled return to the preset speed after the driver releases the throttle or brakes.

Hill Descent Control was engineered to provide the smoothest transitions possible, even from a complete stop on extremely steep and slippery surfaces.
Hill Descent Control is standard on all Jeep Cherokee models with automatic transmissions.

2010 Ferrari 599 GTO

noreply@blogger.com (fatchay) — Sat, 07 Aug 2010 09:54:29 PDT

Ferrari has today revealed details and images of the fastest road-going Fezza yet: the 2010 Ferrari 599 GTO. Inspired by the track-only 599X (the O in GTO stands for Omologata – homologated), Ferrari’s new monster will make its official debut in Beijing later this month.

Powered by a slightly de-tuned version of the Enzo-derived 6.0 litre V12 powering the 599XX, the 599 GTO delivers 500kW at 8250rpm and 620Nm of torque at 6500rpm. In the regular 599, the V12 produces 40kW less, while the track-devouring 599XX offers 522kW.

The big V12 is mated to the same six-speed sequential transmission, although shift times have been reduced by 60ms.

The new GTO is claimed to cover the 0-100km/h run in just 3.35 seconds, on its way to a top speed of 335km/h. According to Ferrari, the new track-inspired 599 GTO lapped its Fiorano circuit in 1:24, making it one second faster around the track than the company’s hero car, the Enzo.

Braking is managed by lighter 398mm carbon-ceramic discs up front and 360mm at the rear. These are backed by improved ducting and pads, along with ‘wheel doughnuts’ – a disc outside the the main brake disc that keeps hot air exiting the wheel arch close to the body, reducing drag in the process.

The GTO’s 20-inch wheels are shod with 285mm tyres at the front and sizeable 315mm rubber at the rear.

As with the 599XX, Ferrari has employed a number of weight-saving techniques with the GTO. Through the use of carbon-fibre and other composite materials, the GTO weighs a good 84kg less than the regular 599 GTB Fiorano.

A new vented hood is featured, along with a purposeful rear diffuser – and a satin black/grey roof to help set it apart (if the aggressive body kit isn’t enough).

Tesla Roadster

noreply@blogger.com (fatchay) — Sat, 07 Aug 2010 09:53:22 PDT

Tesla Roadster, 2008

Tesla Roadster Specifications

* Style: 2-seat, open-top, rear-drive roadster
* Drivetrain: Electric motor with 2-speed electrically-actuated-manual-shift transmission with integral differential
* Motor: 3-phase, 4-pole electric motor, 248hp peak (185kW), redline 13,000 rpm, regenerative "engine braking"
* Chassis: Bonded extruded aluminum with 4-wheel wishbone suspension
* Brakes: 4-wheel disc brakes with ABS
* 0-60 mph acceleration: under 4 seconds
* Top Speed: 125 mph
* Range : ~220 miles (based on EPA combined city/highway cycle)
* Battery Life: Useful battery, 100,000 miles
* Energy Storage System: Custom microprocessor-controlled lithium-ion battery pack
* Full Charge: ~3.5h

Suspension
* Front: independent; upper and lower wishbone; co-axial coil spring/telescopic damper unit; anti-roll bar
* Rear: independent; upper and lower wishbone; co-axial coil spring/telescopic damper
Wheels
* Type: Forged Light alloy
* front: 5.5J x 16
* rear: 7.5J x 17

Tires
* Type: Yokohama Neova AD07 LTS
* front: 175/55 R16
* rear: 225/45 R17

Tesla Roadster Dimensions (in. / mm)
* Overall length: 155.4 / 3946
* Overall width - incl. mirrors: 73.7 / 1873
* Overall height (at curb weight): 44.4 / 1127
* Wheelbase: 92.6 / 2352
* Track - front: 57.6 / 1464
* Track - rear: 59.0 / 1499
* Curb weight: ~2690 pounds
* Leg Room (in./mm): 42.0 / 1067
* Front Head Room (in./mm): 36.7 / 932
* Front Shoulder Room (in./mm): 26.0 / 660

Tesla Roadster Standard Interior features
* Heated sport seats with inflatable lumbar support
* Three-spoke leather-wrapped sport steering wheel
* Smooth leather seats and trim in black, dark gray, light gray, or beige
* Blaupunkt stereo sound system with single-disc CD player, iPod interface, and MP3 playback
* Cruise Control
* Homelink universal transmitter to operate compatible garage, gate, and home lighting/home security systems
* Power windows and locks
* Air conditioning
* Single retractable cup holder

Tesla Roadster Standard Exterior Features
* Double-insulated black soft top
* Proprietary halogen low- and high-beam headlamp assemblies
* LED tail lights
* Forged uni-directional seven-spoke wheels in silver finish: 16" front, 17" rear
* Locking wheel lugs
* Tire Inflator/sealant
* Cold weather ESS heater for cold weather charging to -20 degrees Celsius
* Home-based charging system with integral safety features for 3.5 hour full re-charge

Tesla Roadster Standard Safety and Security Features
* Four-sensor, four-channel Anti-lock Braking Systems (ABS)
* Traction control
* Tire pressure monitoring system
* Front and rear crumple zones
* Driver and passenger front airbags
* Rigid occupant safety cell
* Side impact door beams
* Seatbelt pretensioners
* Integrated headrests
* Vehicle theft-deterrent and engine immobilizer system
* PIN for security in operating the vehicle
* Valet mode to restrict speed, acceleration, and distance

Tesla Roadster Factory-installed options and accessories
* Premium leather seats available in nine colors with embroidered Tesla Motors logo
* Microfiber, non-leather seats in black
* Bluetooth cellular phone integration
* Satellite radio with 170 channels of digital sound
* Seven-speaker premium sound system tuned for Tesla Roadster cockpit
* Touch-screen navigation system with voice guidance
* Matching body-colored carbon fiber hardtop with full headliner
* Metallic and premium paint
* Tesla Motors custom floor mats
* Mobile charging system

Isuzu Zen Concept

noreply@blogger.com (fatchay) — Fri, 30 Jul 2010 22:22:35 PDT

Isuzu Zen Concept, 2001

Proton Car

noreply@blogger.com (fatchay) — Fri, 30 Jul 2010 22:21:45 PDT

Malaysia's primary national car manufacturer has come a long way since the first Mitsubishi-based car rolled off the production line in 1985 and the Proton Impian personifies a new ambition to produce products that are technically advanced, great value and satisfying to drive.

A range of derivative models is currently under development at the R & D Centre, and Proton is also planning the launch of a mid-engined 2+2 sports car based on the Lotus M250 chassis in two years time.

Inner Strength
Thicker steel has been used to reinforce the entire body structure of the new car for maximum rigidity and reduced deformation in collisions. This has also helped to minimise road vibrations and noise transmitted through the suspension mountings.

A recyclable plastic fuel tank module is 15 per cent lighter than in previous Proton models and is designed to withstand a 30 mph rear impact from another vehicle. Modular construction is also used for the doors, front suspension assembly, strut and shock absorber mountings and for brake mountings.

Longer, wider and taller than the Proton Wira, the Proton Impian is also crucially 100 mm longer in the wheelbase. This adds up to more leg, head and shoulder room for added comfort. Spacious accommodation for up to five adults is supported by a wide, easy to load 15.5 cubic feet luggage compartment, which houses a space saving spare wheel and storage tray.

Safe and sure footed
Coil-sprung MacPherson strut front suspension and coil-sprung multilink rear suspension are enhanced by stabiliser bars to create the right balance between precise handling responses transmitted through rack and pinion progressive power steering and ride comfort.

In tuning the spring rates and dampers to achieve this goal, Lotus Engineering conducted exhaustive development work on steering effort and response, linearity, straight-line handling, cornering, lane changing, body control, wheel control and smoothness of ride before the Proton Impian was brought to market. The result is a car that scores eight A's in every facet of ride and handling.

In benchmark tests against such established and acclaimed D sector models as the Audi A4, Honda Accord and Vauxhall Vectra, the Proton Impian established a clear lead in overall ride and handling. With just 2.8 turns from lock to lock, steering response from the alloy wheels shod with 195/55R 15 tyres is direct and positive.

The driver's control of vehicle dynamics is further enhanced by the fitting of traction control as standard equipment to UK-spec cars. Dependable braking over all road surfaces is assured by 10in diameter disc brakes all round, ventilated at the front, plus four-wheel electronic ABS.

Flexible performance
Lower fuel consumption, noise and vibration levels, plus improved flexibility and response are delivered by the latest version of the lightweight Mitsubishi 1.6 litre 4G18 S4 petrol engine fitted to the new model.A plastic intake manifold and redesigned pistons, fuel injectors and distributor have saved space and reduced weight, while a new cooling system, engine stay and cylinder block reinforcement contribute to quieter running.

The four cylinder engine's design features improved cooling and lubrication of the cylinder block. A metal head gasket and wider timing belt ensure even better reliability and consumables such as transmission and engine oil, filters and spark plugs boast extended service intervals.

The new engine delivers increased power and torque than previous 1.6 engines used by Proton for enhanced driveability and economy, while emissions comply with European Step III regulations. Drive is either through a five-speed manual gearbox or optional four-speed electronic automatic transmission.

Safety and comfort
Ergonomic layout of all controls coupled with use of high quality materials in harmonious shades have dictated the design of the new model's passenger compartment. Fascia and seat styling reflects the latest thinking on interior design, with all functions within easy reach and view to help the driver maintain concentration on the road at all times.

Speedometer, tachometer and ancillary gauges monitoring water temperature and fuel level are positioned alongside a warning light panel directly ahead of the driver. Face level fresh air vents are positioned either side of the instrument panel and the driver's view ahead is protected from instrument glare by a stylish curved hood. Below the vents in the strategically-angled centre console are push button controls for secondary functions and a built-in stereo system, which has been ergonomically designed and acoustically tuned by Clarion specially for the Proton Impian.

Controls for the sound system are high mounted in the driver's field of vision to avoid driver distraction and push button controls for volume and station search are incorporated in the 14in. three spoke height adjustable steering wheel, which also houses an electronic driver's airbag.

Primary controls such as headlamps, indicators and wipers/mist washers are mounted on steering column stalks and Proton has even reversed the traditional right side indicator position found on most Pacific rim vehicles to suit European tastes.

Easy to use controls for the standard air conditioning are also to be found in the centre console, which sweeps down to incorporate an ashtray, cigarette lighter, cubby hole, gear shift, handbrake, cup holders and centre armrest concealing a storage bin. Ahead of the front passenger is a fascia-mounted airbag above the large glove compartment and both front seat occupants gain addition impact protection from side airbags.

Body hugging, reclining front seats with adjustable head restraints have 240 mm of fore and aft adjustment, while the driver's seat has hand controls to adjust seat height and lumbar support. Velour upholstery and deep pile carpeting is standard fitment, while the 1.6X is trimmed with Connolly leather upholstery.

Rear seats incorporating vertically adjustable head restraints and a folding central armrest feature 60/40 split and a child seat restraint anchorage. Moulded interior door trim conceals six-piece impact protection that complies with EU side impact safety requirements and windows are electrically powered front and rear.Finger-tip safety-touch controls for all four windows plus child-proof security lock are conveniently located for the driver in the front door armrest, while grab handles above each door and sun visors flush-fold into the moulded headlining.

Renault Megane Coupe Concept

noreply@blogger.com (fatchay) — Fri, 30 Jul 2010 22:23:51 PDT

Renault Megane Coupe Concept, 2008

The Renault has chosen the Geneva Motor Show to take the wraps off its Mégane Coupé Concept show car which foreshadows a compact production coupe to be released at a later date. Like New Laguna, it points to an evolution towards more fluid, sportier styling from Renault. Renault Mégane Coupé Concept targets drivers who are not only drawn by the notion of driving pleasure but who also seek to express their personality through their vehicle. Mégane Coupé Concept symbolizes Renault's vision of what a genuine compact sports coupe should deliver, namely character and dynamism, two traits epitomized by the show car's unprecedented door-opening kinematics.

Distinctive looks that exude personality and dynamism
The Renault Mégane Coupé Concept provides a foretaste of the forthcoming Mégane Coupe. "This show car emphatically showcases the evolution at Renault Design. Its squatter proportions and powerful, energetic styling talk directly to the driver's senses; they say 'driving pleasure'.

The four independent tubes that make up the modern rear lights are housed in the bodywork and serve as a further illustration of the dynamic, technological spirit behind Renault Mégane Coupé Concept. Day or night, they form a highly distinctive signature.

The boot, which pulls open and then lifts to minimize vertical travel, echoes the kinematics of the doors which are divided into two sections. The panelled door itself is topped by a separate glazed area and, as they open, the two parts deploy gracefully and elegantly in an independent movement redolent of dragonfly wings. A carbon arm at the rear of the doors connects them to the body structure and the system ensures particularly easy access for passengers.

The cabin:
a compelling extension of the exterior's dynamic voluptuousness.
The interior is redolent of the world of contemporary furniture. The independent, asymmetric front seats, which rise up from the sills, seem to float in midair. Their wafer-like forms express an airy lightness, while their enveloping design is a pledge of comfort and holds the occupants firmly in place. The aperture revealed by the open doors carries over to the front seat shells and the upper part of the two rear seats.

The futuristic, ethereal dashboard features expressive, flowing lines and can be divided into two distinct sections: the red lacquered main structure and black nubuck inserts which can hold small items. This embedded zone houses the sophisticated instrumentation which takes its inspiration from aviator-style watches, including a speedometer which displays the speed in analogue form on the periphery and in digital form in the centre, plus an analogue rev-counter. Both feature black metallic backgrounds with white graphics and red back lighting.

The cabin equipment is modern and intuitive
The different controls have been inspired by the Renault-pioneered Touch Design approach and are both simple and practical.
The four-zone climate control system allows each passenger to select the temperature they prefer using controls housed either side of the dashboard in the case of the front passengers or on the front seat backs for rear occupants.

A show car dedicated to passion and driving pleasure
Renault Mégane Coupé Concept's generous bumper, wide, low grille and alveolar air-intake point to the presence of a high-performance power plant under the bonnet.

Renault Mégane Coupé Concept is a compact, stylish, dynamic coupe which delivers undeniable driving pleasure, while its sporty calling is also expressed by its modern, elegant cabin. This show car, which builds on the trend established by Laguna Coupé Concept, sees Renault take its will to dial genuine passion into its cars yet another step forward.

Dimensions
* Length (mm) 4,514
* Width (mm) 1,908
* Height (mm) 1,371
* Height with doors open (mm) 2,085
* Wheelbase (mm) 2,749
* Front track (mm) 1,658
* Rear track (mm) 1,648
* Front overhang (mm) 950
* Rear overhang (mm) 815
* Unladen weight (kg) 1,310
* Boot volume (litres) 290
Technical data
* Engine 2.0 T petrol (200hp)
* Power (hp) 200hp (147kW)
* Maximum torque (Nm) 280Nm at 2,600rpm
* Acceleration from standstill to 100kph (s) 7.2
* Standard cycle CO2 emissions / fuel consumption 154g/km / 6.5 litres/100km
* Gearbox Six-speed manual gearbox
* with 'stop and start' system
* Transmission Front-wheel drive
* Tyres 245/35 ZR21
* Wheels 21-inch

Pink Car Modification Pictures

noreply@blogger.com (fatchay) — Sun, 11 Jul 2010 10:21:30 PDT

Pink Shallen of Molly

Pink Audi R8 Cars

Pink Bugatti Veyron

Pink Pagani Zonda

Auto Salon Aussie Car

noreply@blogger.com (fatchay) — Sun, 11 Jul 2010 10:09:44 PDT

While you have to be different to want to modify a car, there are varying levels of "uniqueness" that each person brings to the scene. I mean, it's not the act of a cold, calculatingly logical person to invest tens of thousands of dollars into a means of transport, making it more expensive to run and making it far more uncomfortable and too powerful to drive on the street.

Theo and George Spartalis are not ordinary, and their cars are certainly far from average, often seamlessly integrating show quality build finish to hardcore race-style performance engineering. Both of these very special brothers shine on like crazy diamonds in the coalface that is the tuning scene and this wild S15 is Theo's opus, his toy, his pride and joy. Rather than keeping it placid with big rims, dumped stance, some styling efforts and around 250kW at the wheels, the Spartalis brothers took their inspiration from the most hardcore drag and circuit racing Silvias in Japan.

Theo made a pilgrimage to Japan a few years back, where the sight of the HKS Kyushu S15 running 10.4 on drag radials and using an SR20 pulled the strings in his mind, while it was witnessing the GT300-class C-West S15 JGTC racers (now Super GT) that stamped those formative lustful ideas and dreams into a cold, hard, wanton desire to build his own SR20DET-powered S15, something that could run a number at the drags or blast an enthralling lap out at a local circuit.

To achieve this, he scored himself a 2001-vintage Spec R S15 Silvia import and set about building a car that bridged JGTC circuit influence with some drag racing hardware and a pinch of road car smarts. At first, having spent well over $120,000 and three months in construction, it was a capable all rounder with over 400kW at the treads from its highly engineered SR20 (without nitrous), though it soon copped evolutionary upgrades to assist in its chase for a time slip and the world record for fastest SR20 on radial tyres.

At the start of the original build, Theo wanted the car to blend JGTC and drag styles into a road car and then take it from track to strip to street. However, his desire to run a fast time overcame the short-term circuit aspirations and any shred of road usage for the car, and so it slowly turned more into a strip-focused monster, though Theo reckons it can be re-tuned to smash lap records fairly easily and cheaply.

Before this latest round of modifications to really push it into drag car territory to run a number that Theo would be happy with, it had run a best time of 10.24@138mph on radials and 9.23@148.5mph on slicks, though these passes had been plagued with the kind of teething problems associated with massive feats of engineering like what this car packs. They had suffered all kinds of set-backs, from faulty battery charge warning lights, to shearing billet driveshafts, to a programming glitch on the MoTeC accidentally advancing the timing to nearly 27degrees (which would be enough to kill any normal motor)!

The whole build was excruciatingly difficult as the detail had to be off the clock. It had to be supremely well engineered, but finished to a standard that wouldn't be out of place on a brand new supercar or works-built factory racer. Still, running that first nine second pass made it all worthwhile for Theo, and he's rightfully proud of the advanced workmanship that is packed into the fatter-than-a-sumo two-door, the highlights of which are the seamlessly integrated C West GT widebody, the seam-welded chassis, the R32 Skyline GT-R rear-end, the carbon brakes from the USA and that ludicrously large T51R turbo.

Actually, that monster S13-generation SR20DET (used for simplicity's sake) is one area that has copped plenty of revision and updates over the tenure of the S15's life though most of that work has focused on attaining reliability rather than going for sky high dyno figures. The way the car gets out of the hole (off the line) and how strong it is in the mid-track has more to do with Theo's desire to run an ace time than outright grunt ever will (though that would net him a sweet mph figure).

The first thing most people spot in the engine bay is that monster HKS T51R KAI turbo, the snail pumps 30psi worth of boost into the now-2.2-litre SR20, though that's managed by the HKS 50mm external wastegate, TAL blow-off valve and Blitz Dual SBC boost controller. You can't run such a large huffer without the appropriate preparation being done to the bottom end, and on the GT Autosound S15 there's enough hi-po hardware in there to make a Silvia junkie drool with excitement.

In the block lies a Tomei stroker crank that has bumped capacity up to 2.2-litres and can spin far harder than the Nissan effort, while Power Enterprise bearings now handle the rpm, heat and stress from the manic motor, being able to turn to over 11,000rpm! While shopping at Tomei, Theo picked up a quartet of their matching 2.2-litre con rods to suit the motor as well as a set of oversize 87.5mm pistons that were then also Nikasil coated for extra strength and installed with unbelievably exotic titanium piston rings that are both lightweight and strong. There's also a Trust sump and oil cooler to ensure the motor's longevity.

Having experimented with both standard and heavily modified heads, Theo has settled on this expensive, labour-intensive set-up that is reportedly worth around $12,000 and packs exotic, intricate detailing like CNC porting, JUN billet plenum, Tomei valve springs and Manley titanium and aluminium valves. On the front of the motor, there is a Nissan VQ45 V8 throttle body and Tomei cam gears, while ARP head studs have been fitted to stop the top-end lifting off the long motor when that massive T51R gets a'spoolin'.

With the switch to methanol, the Sard 1000cc injectors currently doing duty will be joined by a second set. Theo had been running American-made Rochester units, but found them to be less than reliable on such a monstrously worked motor, something that can spell disaster and tens of thousands of dollars down the drain if it all goes wrong.

There's also twin SX fuel pumps that basically shower the 2.2-litre four-cylinder with C16 race fuel and twin VL Turbo fuel pumps for the nitrous system. Up the front, a custom radiator and cooling system reduce weight and handle the increased pressures in the system, while the whole exhaust was also custom made from scratch to suit Theo's exact specifications. Ignition is handled by twin MoTeC CDI ignitors as well as high-rate MSD coils and leads, ensuring massive amounts of spark get to those plugs and burn the huge amounts of fuel flowing into each combustion chamber, something that will be even more important with the switch to methanol as it takes double the amount of alcohol to provide the same amount of propulsion as conventional petrol.

Helping keep the detonation at bay is the Trust front-mount air-to-air 150mm-thick drag-spec intercooler. This unit sacrifices ultimate long-distance cooling efficiency for almost no pressure drop at all across the massive core, something that Theo's able to cope with seeing how the car's really only running at full-tilt for a maximum of 10.24 seconds at a time.

All that work adds up to 490 rear-wheel kilowatts without nitrous through the auto gearbox (and well over 500 with a manual), but has seen as high as 600kW at the wheels on the bottle, though this was running a very conservative 18deg of timing. Some of the reasons Theo wants to change the to methanol is because alcohol will burn much cleaner than C16 race fuel, run the motor at a much cooler temperature and allow almost 35 degrees of timing, which should add around 200hp to the car's prodigious total!

Auto Salon Aussie Car Seport

noreply@blogger.com (fatchay) — Sun, 11 Jul 2010 10:06:10 PDT

Right from the moment you laid eyes on it, this AP1 had you, didn't it? Go on, even you turbo-junkie, died-in-the-wool brand whores will have to admit that this has to be one of the meanest, angriest S2000 Honda you've seen, and also one of the best. This S2000 is built to circuit specifications, with thorough lightening of the chassis and body, along with a million adjustable suspension components and an engine that revs like a jet turbine.
To be able to lap Tsukuba in under the one-minute barrier, the line between all-out motor sport engineering and traditional street tuner modifications blurs. Every single piece of the motor's systems has to be scrutinised to check for inefficiencies, wasted power, less-than-perfect balance and possible weaknesses, because while they're all very minor on their own (perhaps contributing maybe one percent, if that), when you go right through a vehicle with a race engineer's eye you'll find quite a few of these issues and suddenly you've got a huge gain on your hands.

A couple of numbers concerning the highly worked F22C engine stand out on the info sheet the Japanese tuning legends provided us: 12.9:1 and 235. That is the sky high compression ratio and amazing amount of kilowatts this naturally aspirated 2.2-litre car puts out, which is about as far removed from your average street-driven AP1 as Jupiter is from Black town, and what an F22C it is!

One of J's Raising's own crate motors which cashed up punters can buy for an eye-watering 798,000 Yen, plus shipping! it is a finely balanced, high-revving, quad-throttle masterpiece that encapsulates all that is great and good about manic track-prepped Honda four-cylinders. In short, this thing is the alpha male of S2000 engines and you can't help but realise that the second you clap your peepers on it.

The custom intake and quad throttles feed obscene amounts of air into the completely rebuilt in-line four-cylinder, which has benefited from judicious reworking of Honda's already excellent engineering to provide a fantastically response power plant that can withstand the brutal forces dished out from regular track work. The sump is now a J's Racing design that stops engine-destroying surging, while there are fluid coolers not just for the motor, but the gearbox and diff as well, all to ensure that they don't overheat and damage anything. Then there are the Megen heavy duty engine mounts, Sam co radiator hoses (that resist blowing off) and an Aussie MoTeC M400 ECU, which will keep a very strict electronic eye over proceedings.

Everything has been carefully tinkered with, as J's Racing went about changing and honing only what they needed to, though they saw fit to develop a new exhaust manifold and featherweight titanium exhaust system for the two-door flier. But, it's not just about power, with the efficient delivery of each of the 235kW the car puts down of utmost importance.

To this end, J's Racing had Exert build them a custom-specification Hyper Single clutch, while the boys in the back room changed the final drive ratio to a shorter, more accelerating 4.4:1. They also packed in one of their own 1.5-way limited-slip centres for increased traction and a set of hardened gearbox and differential mounts to erase the slop of the standard rubber units and assist power delivery. It was those excessive tolerances that provided the impetus for a lot of the suspension work that went on under the sexy bodywork.

After having the shell spot-welded for strength and a thorough roll cage welded in, a set of J's Raising's own CRUX Colver's were fitted, shod with pillow ball upper mounts for a solid mating face, as the noise and harshness damping effects of the stock rubber pieces were not required on this track-only brute. J's also fitted a 20mm roll centre adjuster to let them get their geometry bang on perfect, along with a set of pillow-mount tie rods to eliminate the S2000's cursed bump-steer (where the toe angle changes as the suspension moves up and down, slowing the car in the corner and making it unstable).

Further limitations were eradicated with the removal of the OEM suspension arms, which were replaced by J's Raising's own SPL rear pillow-mount arms, along with the J's Racing sub-frame reinforcement kit in both the front and rear ends, which reduces twisting and takes the last ounce of slack in the OEM road set-up and drop-kicks it out of the park. Make no mistake: this S2k is stiffer than one of the Sydney Harbour Bridge's support girders.

The car is still on Pirelli P7 tires

noreply@blogger.com (fatchay) — Sun, 11 Jul 2010 10:03:10 PDT

This car was sold new in late 1979 by Hubert Hahne, the primary Lamborghini dealer in Europe at the time. The original owner of 112.1094 is unknown (after 12 years to trying!). The car apparently stayed in Germany until 1984 when it was imported into the USA as an “exempt” car. Thus, it has no emission equipment and is essentially “European stock” in all respects except side marker lights. I have all the DOT, EPA and US Customs paperwork and these have been verified by DOT’s importation expert (Dick Merritt actually signed the DOT forms for this car when it came into the USA).

The second owner of the car had it only a short time but put a hole in one piston and his Florida bank repossessed the car. The car was then bought by a former employee of Jaguar who had considerable automotive experience and owned other exotic cars. He rebuilt the motor and attended to many other details. The car went through a dealer in Virginia for a short time and then went to the owner of a small car collection on Long Island, NY. The car was driven little over several years. He sold it to a reputable dealer in western Connecticut (Forza) and I bought the car from Peter Sweeney at Forza. Thus, I seem to be the 5th owner (not including the Florida bank and two dealers).

New BMW Concept

noreply@blogger.com (fatchay) — Sun, 11 Jul 2010 09:53:16 PDT

BMW's incoming chapter in its EfficientDynamics program calls for a newborn all-electric vehicle to complement its underway fleet of leased Mini E electric subcompacts. To fulfill its self-prescribed mission, it enlisted the help of the 1 Series coupe and a revised synchronous electric locomote to create a newborn show car called the Concept ActiveE. It's the epitome of electromobility in the true BMW sense, the automaker claims, and with the Mini E, continues to pave the way towards the eventual content of a mass-produced 'Megacity Vehicle'.

The heart of the concept is, of course, its electric powertrain. Engineers designed the unit to replace the 1 Series' combustion engine, fuel tank, drivetrain, and rear axle. The actual motor is enclosed in the would-be differential casing, while the lithium-ion battery modules take the place of the propshaft and also fit snugly under the front hood. ActiveE keeps the 1 Series's rear-wheel drive layout, as well as its 50/50 weight distribution, and combined with the instantaneous high torque of the new motor, promises to live up to the brand's distinct driving spirit.

Making a grand total of 170 horsepower and 184 foot-pounds of torque, the motor was built to provide generous amounts of grunt at high road and engine speeds. That's in addition to the Concept ActiveE's immediacy of power, as in other EVs. The electric powertrain has been tuned to behave similar to that of a combustion engine, by reducing torque gradually under high load, rather than abruptly. BMW points out that the 3900-lb. car can hit 60 mph in around 8.5 seconds and achieve a top speed of 90 mph.

Samsung's SB LiMotive partnered with engineers in city to develop the innovative power supply. Their lithium ion battery cells are grouped into compact modules that apply individualist liquefied cooling systems to boost the vehicle's 100-mile single-charge range. Thanks to the battery's intuitive management control unit, users hit the plasticity to calculate their container at any number of outlets, disregarding of voltage or amperage. The control unit calculates power conversions and allows the batteries to calculate at a alacritous pace. Engineers hit quoted 3 hours to fully calculate the units while obstructed into a 230/240 volt European-spec outlet. On a more North American-like 32 amp plug, it'll verify 4.5 hours.

Ferrari Enzo Gemballa MIG U1

noreply@blogger.com (fatchay) — Sun, 11 Jul 2010 09:46:35 PDT

In the last 27 years, Uwe Gemballa has achieved the best world-wide reputation for refining Porsche cars. Now, the company manager from Leonberg near Stuttgart takes on a new challenge. The automobile manufacturer turns the most potent super sports car from Maranello, the Ferrari Enzo, into the GEMBALLA MIG-U1 – an individually produced edition, limited to only 25 cars.

The core part of the overall makeover is the entirely re-engineered aerodynamics concept by GEMBALLA. Without any exception, the manufacturer produces all components in real carbon in order to combine lowest weight with highest material strength.