iMobile

Complete Nokia codes

noreply@blogger.com (Arunasalam Rajan) — Thu, 29 May 2008 08:39:00 +0000

most of the code i have posted already but this post it have all of them and some new.

1 Imagine ur cell battery is very low, u r expecting an
important call and u don't have a charger.
Nokia instrument comes with a reserve battery. To
activate,
key is "*3370#"
Ur cell will restart with this reserve and ur instrument
will show a 50% incerase in battery.
This reserve will get charged when u charge ur cell
next
time.
*3370# Activate Enhanced Full Rate Codec (EFR)-Your phone
uses the best sound quality but talk time is reduced by approx.
5%
#3370# Deactivate Enhanced Full Rate Codec( EFR)

*#4720# Activate Half Rate Codec - Your phone uses a
lower
quality sound
but you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec

2 *#0000# Displays your phones software version,

1st Line : Software Version,
2nd Line : Software Release Date,
3rd Line : Compression Type

3 *#9999# Phones software v ersion if *#0000# does not work

4 *#06# For checking the International Mobile Equipment
Identity
(IMEI Number)

5 #pw+1234567890+1# Provider Lock Status. (use the "*"
button
to obtain the "p,w" and "+" symbols)

6 #pw+1234567890+2# Network Lock Status. (use the "*" button
to
obtain the "p,w" and "+" symbols)

7 #pw+1234567890+3# Country Lock Status. (use the "*" button
to
obtain the "p,w" and "+" symbols)

8 #pw+1234567890+4# SIM Card Lock Status.(use the "*" button
to
obtain the "p,w" and "+" symbols)

9 *#147# (vodafone) this lets you know who called you last
*#1471# Last call (Only vodofone)

10 *#21# Allows you to check the number that "All Calls" are
diverted To

11 *#2640# Displays security code in use

12 *#30# Lets you see the private number

13 *#43# Allows you to check the "Call Waiting" status of your
phone.

14 *#61# Allows you to check the number that "On No Reply"
calls
are diverted to

15 *#62# Allows you to check the number that "Divert If Unrea
chable(no service)" calls are diverted to

16 *#67# Allows you to check the number that "On Busy Calls"
are
diverted to

17 *#67705646#R emoves operator logo on 3310 & 3330

18 *#73# Reset phone timers and game scores

19 *#746025625# Displays the SIM Clock status, if your phone
supports this power saving feature "SIM Clock Stop Allowed", it
means you will get the best standby
time
possible

20 *#7760# Manufactures code

21 *#7780# Restorefa ctory settings

22 *#8110# Software version for the nokia 8110

23 *#92702689# (to rember *#WAR0ANTY#)
Displays -

1.Serial Number,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no
repairs),
5.Transfer User Data.
To exit this mode -you need to
switch
your phone off then on again

24 *#94870345123456789# Deactivate the PWM-Mem

25 **21*number# Turn on "All Calls" diverting to the phone
number
entered

26 **61*number# Turn on "No Reply" diverting to the phone
number
entered

27 **67*number# Turn on "On Busy" diverting to the phone number
entered

28 12345 This is the default security code press and hold #
__________________

Nokia codes

noreply@blogger.com (Arunasalam Rajan) — Thu, 29 May 2008 08:20:00 +0000

The tips below may not work with all modules, but give it a try.

To check the phones Software revision for Nokia Mobile.
On the main screen type *#0000#

To enter in the secret menu in Nokia Phone.
On the main screen type *#92702689# [*#war0anty#]
It will take you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)

To restore Factory Settings for Nokia mobile
*#7780# reset to factory settings.

Taking picture without getting noticed.
Turn on/off the "click" sound made by the camera by selecting the 'Silent' profile or by turning warning tones on/off.

Hiding your Mobile/ Cellphone Number (this won´t work in all countries like india)
Go to: Menu > Tools > Settings > Call > Send My Caller ID >
'Yes', 'No' or 'Set By Network' to follow the default settings of your home network.
It works only with very few network who provide you facility of “Private Number”

Speed Dialing From Simcard contact (not stored in mobile phonebook)
Type number followed by # then call.
Example: 1# or 2# or 21#

LG mobile tricks

noreply@blogger.com (Arunasalam Rajan) — Thu, 29 May 2008 08:13:00 +0000

Here some LG phone tricks try it and let me know how effective this tricks are!

LG all models test mode:
Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600): 2947#*

LG-U81XX SPECIAL CODES
Code to read phone version :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'SW Ver.info'
Code to reset phone :
- Phone without SIM

- Enter 277634#*# or 47328545454#
- Select 'Factory Reset'

Code to enter UNLOCK MENU :
- Phone wit SIM inside
- Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*

3G iPhone to be Sold in Italy in June 2008

noreply@blogger.com (Arunasalam Rajan) — Mon, 12 May 2008 11:50:00 +0000

Electronic Weekly's David Manners writes (via CNet.com.au) about a revealing encounter he had with Luigi Licciardi, executive vice president for technology and operations at Telecom Italia Mobile (TIM). Licciardi confirms what everyone essentially knows: that TIM will be delivering a 3G version of the iPhone to Italy. Licciardi, however, actually gives us a solid timeframe for the launch:
“We will be selling an iPhone with 3G capability next month”, Luigi Licciardi, executive vice president for technology and operations at TIM told me yesterday evening on a bus taking us out into the desert for dinner following the first day of the International Electronics Forum 2008 in Dubai.

"Next month" conveniently coincides with Apple's Worldwide Developer's Conference (WWDC), which takes place from June 9th to June 13th in San Francisco, CA.

This latest quote adds to a laundry list of evidence pointing to an imminent release of the 3G-capable iPhone. While the quote does not necessarily preclude an earlier May launch in the U.S., the rest of the available evidence points to June:

- Latest iPhone 2.0 Firmware Has 3G On/Off Option
- AT&T Blocking Out June 15-July 12 for 3G iPhone Launch?
- Foxconn to Deliver 3G capable iPhones Beginning in June

Meanwhile, Research in Motion today announced their first 3G-capable mobile phone, the BlackBerry Bold. While the Bold will also not available until this summer, Apple has clearly targeted RIM as a competitor to the iPhone.

Finally, just this morning additional iPhone coverage for Singapore, India, the Philippines and Australia has been announced by SingTel, Bharti Airtel, Globe and Optus. This means two carriers will be providing coverage in India and Australia. No additional details were provided in the press release.

Bypass the SP lock

noreply@blogger.com (renga) — Mon, 12 May 2008 09:18:00 +0000

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one provider you can bypass the SP lock like this:
1. Insert sim card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappear and appear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again.
NOTE: On version 5.04 Nokia has removed this option !

How to open lock 2

noreply@blogger.com (renga) — Mon, 12 May 2008 09:16:00 +0000

When operators companies close lock2 you can only use the contract or prepaid card for this operator, but you can use another operator company prepaid card if you know what GID1 must write.

1. Install Winlock
2. Run Winlock
3. Configure Winlock. Select menu Winlock->Defaults and change GID byte count to 2.
4. Push Read Phone, and write down GID1 info that appear in lock 2.
5. Insert the prepaid card from a different operator company.
6. We must find out a the GID1 info adequate for our new prepaid or contract card, take a look at our GID1 list and check if your operator and SIM card type is included, if not try to get a phone that have lock 2 closed and have the SIM card type that you want to use in your phone, and read GID1 info with winlock. You can try to write the most used GID1 codes like 0000,10FF,01FF, or FFFF, etc.
7. Change Lock 2 Type from User To Factory or from Factory to User.
8. Push Close Locks
9. Your phone will be reset every time you push Close Locks, if your card is not accepted the GID1 is not correct, repeat from step 4 until you find the correct GID1.
10. If you get error you must turn off your phone and reset computer and try again.
11. If you want your phone accept your original prepaid card write in GID1 the code you read at step 2 and close locks.

How to open lock 1 and 4

noreply@blogger.com (renga) — Mon, 12 May 2008 09:15:00 +0000

You will need Winlock software and a MBUS cable to do this. Winlock is a Nokia service program that you can use to open lock 1 and 4, really you are closing locks when you do that, but when you write ????? at MCC+MNC and MSIN text box, the phone don't understand it and consider that it's open.
That trick only works for lock 1 and 4, but not for lock 2 and 3.

1. Install winlock 1.10
2. Connect your MBUS Nokia data cable
3. Run Winlock
4. Push Read Phone, if you have Lock 2 or Lock 3 closed you can not open your phone, but you can try change Lock 2.
5. Select State Close in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ??????? and Push Close Locks.
6. Now you can use any operator card in your phone.

If you get any error when you do that do the following steps :
Select State Automatic in Lock 1 and Lock 4 and change type to User in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ?????????? and Push Close Locks.
- Select State Automatic in Lock 1 and Lock 4 and change type to Factory in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ?????????? and Push Close Locks.
- If you continue getting errors you must turn off your phone and reset computer and try again.

Service Prover Lock

noreply@blogger.com (renga) — Mon, 12 May 2008 09:14:00 +0000

The service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. (Lock 1)

The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove SIM card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with. #pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Country-Lock status
#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4
[ Master code ] is a 10 digit code, based on the phones IMEI number.

Eg. To remove restriction on lock 1 type following code:
#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
Ex. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#

NOTE : These codes could be used with care! A user told me that it's only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

The Reboot Trick

noreply@blogger.com (renga) — Mon, 12 May 2008 09:12:00 +0000

Should work on all software versions.
1. Go to calendar (menu - 8)
2. Make note / reminder
3. Enter some text into the edit box
4. Hold clear until whole text is cleared, then press Back
5. Press 0. Main screen is shown but a space appears on the screen. You can't see it of course.
6. Enter 4 digits (1234, for example)
7. Use the down arrow to move the cursor to the left side of the numbers and the space (2 times down arrow)
8. Now enter 6 digits and press the green "Call button".

Wait some seconds...the phone will now flash the background light and finally reboot. The trick should also work on other menus like the profile menu. The James Bond Trick

If you short-circuit the left middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs. The profile "Headset" will be activated.

Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

Network Monitor

noreply@blogger.com (renga) — Mon, 12 May 2008 09:11:00 +0000

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone or the easier way is by using the Software Pclocals and the MBUS cable.

With re-programming :

1.Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2.Take apart the phone.
3. De-solder the EEPROM (ATMEL AT 24C64).
4. Read out the data with an EEPROM programmer and save it to a file (Backup).
5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
6. If you have v5.24 then change the address "0378" from "00" to "FF".
7. Write the new data to the EEPROM and solder it back to the phone.
8. Power on your phone and you should have "Netmonitor" enabled.

With Software Pclocals :

1. You'll need an MBUS cable and Pclocals.zip. (To get this file, E-Mail Us your request)
2. After the splash screen of the program, you'll have to set-up the COM port where your cable is attached.
3. After "Initializing connection" choose "MR Memory Functions" and once you arrive at this menu choose the menu 6.
4. Then type 243 ad Field Test Display to activate the full netmonitor or 241 to deactivate it.

The Network Monitor gives you the following information.

Carrier number

MS RX Level in DBM

Received signal quality

MS TX power level C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.

RTL (Radio link timeout).

Timeslot

Indication of the transmitter status

Information on the Network parameters.

TMSI (Temporary Mobile Subscriber Identity).

Cell identification (Cell ID, Number of cells being used).

MCC (Mobile country code)

MCN (Mobile network code)

LAC (Location area code)

Ciphering (On/Off)

Hopping (On/Off)

DTX (On/Off)

Discard cell barred information.

Nokia 5110 Secrets

noreply@blogger.com (renga) — Mon, 12 May 2008 09:10:00 +0000

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.

*#746025625# [*#sim0clock#]

Checks if the SIM clock can be stopped. SIM clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#]

You don't need the warranty-codes any more - you can just scroll through the information like in any other menu. It has the same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer")

Menu :

1: Displays Serial Number.
2: Displays the Month and Year of Manufacture (0997)
3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once - so be careful what you write...)
4: Displays the date of the last repair - if found (0000)
6: Does anyone know if this is for upgrading the phone's EEPROM?? (Transfer user data?)

Enhanced Full Rate Codec (EFR):

On: Enter *3370# and EFR will be activated after a reboot of the phone ( This consumes more power )
Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:

On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone ( better standby time )
Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone.

Enhanced Full Rate :

Will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilo bits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%.

Half Rate :

Will give you bad sound quality, which gives the service provider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

Nokia 3330

noreply@blogger.com (renga) — Mon, 12 May 2008 09:08:00 +0000

Note : All secrets mentioned below have been tested working on Nokia 3310.
Most (perhaps all !) of them, would work on the Nokia 3315 And Nokia 3330.

To See IMEI Number : Press *#06# in Idle mode.

Pressing *#0000# will take you to a special display which shows...

1. Software Version
2. Some Date (Most probably the date of software release)
3. ??

The x# Trick

By pressing x# (where x is any number upto 100) will show the telephone number stored in location x. For example, pressing 5# in idle mode will show the 5th number you stored when you entered the numbers in your phone-book.

Pressing *#92702689# will take you to a new menu with 6 options :

1. Serial Number Of Your Phone.
2. Month And Year Of Manufacture (In format MMYY).
3. Purchasing date. You can only set this once.
4. Enables phone for data transfer if you have all the necessary equipment.
5. Life Timer - ??

To exit the menu, switch off the phone and then back on.

Special Character Trick

While composing an SMS, you would often require to key in some special characters. The entire list of available characters is made available by pressing and holding the * key. Further, you can go down directly instead of going horizontally by pressing #.

Wake Me Up !

Some pre-paid card networks allow the option of "Balance On Screen" facility that displays the remaining credit and validity on the screen. When you go to sleep, set the alarm as usual and then return to idle mode. Now, request for a "balance on screen". Let the balance screen remain and you doze-off to sleep. When the alarm rings as per the set-time, every key will act as the "Snooze" key. The alarm will pause for a certain while but it won't stop ringing ! Eventually, you'll get frustrated and you'll get up ! Wow !

Nokia 3315

noreply@blogger.com (renga) — Mon, 12 May 2008 09:07:00 +0000

Nokia 3310

noreply@blogger.com (renga) — Mon, 12 May 2008 09:06:00 +0000

Nokia 3210 Secrets

noreply@blogger.com (renga) — Mon, 12 May 2008 09:05:00 +0000

*#06# : Checking the IMEI (International Mobile Equipment Identity)

*#0000# : To view Software Version.

*#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. SIM clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices :

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Makes you capable of transferring user data if you have the gear for it.
6. Shows how many hours the phone has been on Latest software version.

*3370# : Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
#3370# : Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*4370# : Half Rate Codec activation. It will automatically restart
#4370# : Half Rate Codec deactivation. It will automatically restart

xx# : xx position in Phone Book. Ex.11# will show the number stored in the 11th position of the Phone Book.

Free SMS Tip

You can use this method on your mobile phone to send out FREE SMS Messages !
Set Menu 4-3-3 on User Group 666 (With German Networks).
It's now the group 999. [ But it's not tested yet ]

Bypass the SP lock

noreply@blogger.com (renga) — Mon, 12 May 2008 09:04:00 +0000

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIM locked to one provider you can bypass the SP lock like this:
1: Insert sim card of different provider.
2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?
3: Press the "C" key.
4: Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#

The phone should now say : PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again.
NOTE: On version 5.04 Nokia has removed this option.

Nokia 3110 Secrets

noreply@blogger.com (renga) — Mon, 12 May 2008 09:02:00 +0000

*#06# : Checking the IMEI (International Mobile Equipment Identity)

*#7780# Restores Factory Settings (Memory, language, counters are not included).

*#3110# : Checking the phone's software (SW) - Also called "Firmware Revision Information".

*#746025625# [*#sim0clock#]
Checks if the SIM clock can be stopped. SIM clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#]
Press the following warranty code :
6232 (OK) : Displays the Month and Year of Manufacture (0997)
7332 (OK) : Displays the date of the last repair - if found ('DATE NOT SAVED'...)
7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY
(Warning : You can only set this once.)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another

Service Prover Lock
The service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it. The cell phone will however accept another SIM card from the same operator. All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. (Lock 1) The main code used in Nokia phones is:
#pw+(master code)+Y#

This code is able to check, activate or remove SIM card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Country-Lock status
#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4
[Master Code] is a 10 digit code, based on the phones IMEI number.
[ No requests for the "Master Code" will be entertained. ]

Eg. To remove restriction on Lock 1 type following code:

#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eg. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#

NOTE : These codes could be used with care. A user told me that it's only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx

noreply@blogger.com (renga) — Mon, 12 May 2008 09:00:00 +0000

1. Insert SIM card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec.
Then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again.
NOTE: On version 5.04 Nokia has removed this option !

Cell-sites
To enable display of cell-site names, [MENU] 4-9-1

Received calls
To see received calls. Same As menu options (012)
Enter : * then Memory then Find or * then the down arrow Missed calls

To see missed calls
Same as menu option (01 3)
Enter : + then Memory then Find or + then the down arrow

DTMF tones
Pressing Menu, then Green Phone button allows you to transmit DTMF tones

Car kit Programming
If you use a car kit with handsfree AND additional handset, and you want to switch from handset to handsfree: Press the left menu button, and put the additional handset on hook. Now you are on handsfree.

Nokia 2110i Secrets

noreply@blogger.com (renga) — Mon, 12 May 2008 08:52:00 +0000

*#06# for checking the IMEI (International Mobile Equipment Identity)
To view Week and Year of manufacture enter *#3283# [*# D A T E #]
The last two digits are the year. If the year is 95, the first two digits are the month. For 96 the first two digits are the week of the year.

To view the software version on 2110e / 2110i enter *#170602112302# or *#9999#
On newer phones, the code has been changed to *#682371158412125#

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. (Lock 1)

The main code used in Nokia phones is :
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Country-Lock status
#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.

Eg. To remove restriction on lock 1 type following code:
#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)

eg. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#

Sony Ericsson W200i(512 MB)

noreply@blogger.com (renga) — Mon, 12 May 2008 06:46:00 +0000

The Sony Ericsson W200; a blend of easy-to-use mobile phone and the key features needed to make a first step into ¡¥music on your mobile¡¦. With the W200 Walkman phone you can store up to 37 full length tracks* (or about four albums) and it¡¦s easy to replace them when it¡¦s time for a change. Simply transfer music from your PC with the Disc2Phone music management software supplied. This latest addition to Sony Ericsson¡¦s musical family will be available in two renowned Walkman phone colours (Rhythm Black & Pulse White) and has stamina for up to 18 hours of music listening.

Specification

Size: 101 x 44 x 18 mm
Weight: 85 g
Display Size: 1.8 inch, 128 x 160 pixels
Display Colors: 65k colours
Total Memory: 27 MB internal memory

Messaging

SMS: Yes
MMS: Yes
Email: Yes

Camera

Camera: Yes
Mega Pixels: 640 x 480 pixels
Camera Zoom: Yes
Video Capture: Yes

Connectivity

Ports: Yes
Infrared: Yes
Bluetooth: No
Wifi: No
Gprs: Yes

Entertainment

Music Player: Walkman DTS Player
FM Radio: RDS FM Output
Games: Yes
Ring Tones: MP3

Technology

3G: No
OS: Symbian Core, Sony Ericsson UI
Touch Screen: No
Push Mail: No
EDGE: No
Java Technology: Yes

Network

Standby Time: up to 360
Operating Frequency: GSM 900 / 1800/ 1900
Talk Time: Up to 7 h

Phone Kit

KIT: Handset
Battery: Included
Charger: Included
Headset: Yes
MMC: 27 Internal Memory

The Sony Ericsson W200; a blend of easy-to-use mobile phone and the key features needed to make a first step into ¡¥music on your mobile¡¦. With the W200 Walkman phone you can store up to 37 full length tracks* (or about four albums) and it¡¦s easy to replace them when it¡¦s time for a change. Simply transfer music from your PC with the Disc2Phone music management software supplied. This latest addition to Sony Ericsson¡¦s musical family will be available in two renowned Walkman phone colours (Rhythm Black & Pulse White) and has stamina for up to 18 hours of music listening.

HP iPAQ 512

noreply@blogger.com (renga) — Mon, 12 May 2008 06:37:00 +0000

Specification

Size: 107 x 48.6 x 16.3
Weight: 102 gm
Display Size: 2.0 inch, 176 x 220
Display Colors: TFT 262K colors (OS support up to 65K)
Total Memory: 128 MB ROM / 64MB RAM

Messaging

SMS: Yes
MMS: Yes
Email: Yes

Camera

Camera: Yes
Mega Pixels: 1.3 Megapixel
Camera Zoom: Yes
Video Capture: Yes

Connectivity

Ports: Yes
Infrared: No
Bluetooth: Yes
Wifi: Yes
Gprs: Yes

Entertainment

Music Player: Yes
FM Radio: No
Games: Yes
Ring Tones: Polyphonic

Technology

3G: No
OS: Windows Mobile 6.0 Standard
Touch Screen: No
Push Mail: No
EDGE: Yes
Java Technology: Yes

Network

Standby Time: up to 188 hr
Operating Frequency: GSM 850 / 900/ 1800 / 1900
Talk Time: up to 6.5 hours

Phone Kit

KIT: Handset
Battery: Included
Charger: Included
Headset: Yes
MMC: Yes

HP iPAQ 512, a sleek and small smartphone that delivers a flexible wireless email experience for business customers through convenient voice control and hands-free operation. The HP iPAQ 512 Voice Messenger features voice over Internet protocol (VoIP) capabilities, push email and the latest Windows Mobile 6 operating system. With up to six hours of continuous talk time on a fully charged battery, the HP iPAQ Voice Messenger also leads the competition in battery life. As the first in HP’s new smartphone lineup, the HP iPAQ 512 helps highly mobile professionals stay connected wherever they are.

Huawei 5330(V Kewl)

noreply@blogger.com (renga) — Mon, 12 May 2008 06:14:00 +0000

Specification

Size: 103 mm × 46 mm × 15 mm
Weight: 85 g
Display Size: 1.8",176 x 220 pixels
Display Colors: 262K TFT
Total Memory: Flash Memory - 256 MB,SRAM -64 MB

Messaging

SMS: Yes
MMS: No
Email: No

Camera

Camera: Yes
Mega Pixels: 1.3 Mega Pixel
Camera Zoom: Yes
Video Capture: No

Connectivity

Ports: No
Infrared: No
Bluetooth: No
Wifi: No
Gprs: No

Entertainment

Music Player: No
FM Radio: Yes
Games: Preloaded Games
Ring Tones: 64 Poly ,MP3

Technology

3G: No
OS: Huawei
Touch Screen: No
Push Mail: No
EDGE: No
Java Technology: NA

Network

Standby Time: Upto 270 hrs
Operating Frequency: CDMA 800 Mhz
Talk Time: Upto 310 mins

Phone Kit

KIT: Handset
Battery: Included
Charger: Included
Headset: Included
MMC: Yes

This is The Good phone with 1.3 MP Camera, FM and Video Play back.It also has the expandable memory.

Samsung Glyde U940

noreply@blogger.com (Arunasalam Rajan) — Sun, 11 May 2008 09:49:00 +0000

This high-end CDMA phone sports a full finger-touch interface plus a slide-out QWERTY text keyboard. Key features include a high-resolution display, 2 megapixel auto-focus camera, EVDO data, GPS navigation, memory card slot, video capture, stereo Bluetoth, and a standard 2.5mm headset jack.

Modes:

CDMA 850 / CDMA 1900

Weight:

4.2 oz (119 g)
Dimensions:

4.09" x 1.98" x 0.71" (104 x 50 x 18 mm)
Form Factor:

Slide
text keyboard slides out sideways
Internal Antenna

Connectivity:

Bluetooth, Infrared, Wi-Fi, GPS, PC Sync

Battery Talk:

Up to 210 minutes
Standby:

Up to 250 hours
1000 mAh LiIon

Camera:

2.0 MP/ 2048x1536/ Flash/ Zoom/ Auto-Focus/ Video recorder

Display Type:

LCD (Color TFT/TFD)

Resolution:

240 x 440 pixels
2.8" diagonal
Memory:

45 MB (built-in, flash shared memory) Expandable microSD

Phone Book Capacity:

500

Applications:

Phone book, Calendar, To-Do list, Wap, Voice commands, Calculator

i-Mate JASJAR

noreply@blogger.com (renga) — Sun, 20 Apr 2008 05:19:00 +0000

Specification

Size: 127 x 81 x 25 mm
Weight: 285 g
Display Size: 640 x 480 pixels, 73 x 55 mm
Display Colors: TFT touchscreen, 65K colors
Total Memory: 64MB RAM

Messaging

SMS: Yes
MMS: Yes
Email: Yes

Camera

Camera: Yes
Mega Pixels: 1.3 MP 1280 x 960 pixels
Camera Zoom: Yes
Video Capture: Yes

Connectivity

Ports: Yes
Infrared: Yes
Bluetooth: Yes
Wifi: Yes
Gprs: Yes

Entertainment

Music Player: Yes
FM Radio: No
Games: Yes
Ring Tones: Polyphonic, MP3, AAC

Technology

3G: No
OS: Windows
Touch Screen: Yes
Push Mail:
EDGE: No
Java Technology: Yes

Network

Standby Time: Up to 260 h
Operating Frequency: UMTS / GSM 900 / GSM 1800 / GSM 1900
Talk Time: Up to 8 h

Phone Kit

KIT: Handset
Battery: Included
Charger: Included
Headset: Yes
MMC: 64 RAM

LG S5200

noreply@blogger.com (renga) — Sun, 20 Apr 2008 05:16:00 +0000

Specification

Size: 128 x 160 pixels
Weight: 92 g
Display Size: 128 x 160 pixels
Display Colors: TFT, 256K colors
Total Memory: 64 MB shared memory

Messaging

SMS: Yes
MMS: Yes
Email: Yes

Camera

Camera: Yes
Mega Pixels: 1.3 MP 1280 x 960 pixels
Camera Zoom: Yes
Video Capture: Yes

Connectivity

Ports: Yes
Infrared: No
Bluetooth: Yes
Wifi: No
Gprs: Yes

Entertainment

Music Player: Yes
FM Radio: No
Games: 2 - Action in life, Halloween Fever + downloadable
Ring Tones: Polyphonic (64 channels), MP3, AAC

Technology

3G: No
OS: No
Touch Screen: No
Push Mail: No
EDGE: No
Java Technology: Yes

Network

Standby Time: Up to 200 h
Operating Frequency: GSM 900 / GSM 1800 / GSM 1900
Talk Time: Up to 2 h

Phone Kit

KIT: Handset
Battery: Included
Charger: Included
Headset: No
MMC: No