Instrument Alat Uji Indonesia

Alat Uji Vibration Meter For Heavy Duty

noreply@blogger.com (Anonymous) — Sun, 10 Jan 2016 03:33:00 -0800

Instrument Alat Uji Getaran Vibration Meter untuk Heavy Duty - 407860

Alat uji vibration meter merupakan alat uji yang mengukur dari getaran yang terjadi pada mesin-mesin industri, baik pompa, motor, turbin, dan lain-lain. alat ini dapat di sambungkan dengan pc karena data pengukuran dapat disimpan dan di tampilkan kembali ke dalam PC.

Fitur dari Alat Uji Vibration Meter 407860

Ranges - Acceleration: 200m/s2, Velocity: 200mm/s, Displacement: 2mm
Remote vibration sensor with magnetic adapter on 39"(1m) cable
Record mode stores the maximum and minimum values for later recall
Wide frequency range of 10Hz to 1kHz
Resolution to 0.5m/s2, 0.5mm/s, and 0.005mm
Basic accuracy of ±(5% + 2 digits)
RMS or Peak Value measurement modes
Data Hold, Auto shut-off
9V battery power or optional AC adaptor
Built-in RS-232 PC serial interface with optional Data Acquisition Software

Jika anda berminat, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon dengan penawaran terbaik

Alat Uji CO Meter

noreply@blogger.com (Anonymous) — Sun, 10 Jan 2016 01:22:00 -0800

Instrument Alat Uji Karbonmonoksida atau CO Meter - CO10

Alat ini digunakan untuk mengetahui kadar karbonmonoksida dalam suatu area, alat ini menjadi penting karena molekul CO ketika terhisap ke dalam paru-paru maka kemampuan ia berikatan dengan hemoglobin lebih bagus dibandingkan dengan oksigen. Oleh karena itu jika kadarnya berlebihan akan membahayakan. Molekul CO dapat ditimbulkan oleh pembakaran mesin yang tidak sempurna sehingga yang dihasilkannya gas karbonmonoksia. Kita pernah mendengar anak-anak yang tewas di dalam mobil yang tertutup sedangkan ac dalam kondisi menyala, maka mesin tidak terjadi pembakaran sempurna.

Fitur dari CO meter

Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm
1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)
Utilizes a stabilized electrochemical gas specific (CO) fast response sensor
Audible alarm starts at 35ppm
Backlight for low light conditions

Berminat dengan alat ini karena ingin agar kondisi udara disekitar aman, kirimkan inquiry anda

atau dengan menghubungi kami

Pen Vibration Meter VB400

noreply@blogger.com (Anonymous) — Sun, 10 Jan 2016 01:00:00 -0800

Instrument Alat Uji Getaran Pen Vibration Meter - VB400

Alat uji VB400 merupakan instrumentasi alat uji yang sangat praktis, digunakan untuk mengukur getaran yang terjadi pada mesin-mesin produksi. Getaran pada mesin dapat saja terjadi akibat adanya friksi yang berlebihan dan telah terjadi aus atau mobilisasi mesin.

Fitur Vibration Pen Meter VB400

Measures RMS Acceleration and Velocity with metric and imperial units of measure
Measurement ranges:

Acceleration (RMS): 656ft/s2; 20.39g; 200m/s2
Velocity (RMS): 7.87in/s; 2.00cm/s; 200mm/s

Wide frequency range of 10Hz to 1kHz
Resolution to 1ft/s2; 0.01g; 0.1m/s2 and 0.02in/s; 0.01cm/s; 0.1mm/s
Basic accuracy of ±(5% + 2 digits)
Zero adjustment, Data Hold, Low battery indicator
Water and dust resistant to IP65
Complete with test pin tip, magnetic base, 4 x AAA batteries, and pouch case

Anda berminat dengan alat ini, kirimkan inquiry anda

atau dengan menghubungi kami,

Alat Uji Magnetic Field Meter (Gauss Meter) MF100

noreply@blogger.com (Anonymous) — Tue, 5 Jan 2016 01:23:00 -0800

Instrument Alat Uji Kekuatan Medan Magnet - Magnetic Field Meter - Gauss Meter - Tesla Meter MF 100 Extech

Alat uji MF 100 merupakan alat yang digunakan untuk mengukur kekuatan medan magnet, gauss meter, atau tesla meter. MF100 memiliki dua sumber daya, AC atau pun DC dengan hasil pengukuran nilai gauss yang berbeda. Alat ini sangat tepat untuk mengukur medan magnet yang ditimbulkan oleh alat elektronika, komponen listrik, dan lain-lain,

Fitur Magnetic Field Meter MF 100

Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)
N pole/S pole indicator
Zero button for DC measurement
Data Hold and Min/Max
Auto power off with disable
Complete with uniaxial magnetic probe sensor and protective cover, 9V battery, and hard carrying case

berminat dengan alat uji magnetic field meter, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon segera dengan penawaran yang terbaik

Alat Uji InfraRed Thermometer IR100

noreply@blogger.com (Anonymous) — Tue, 5 Jan 2016 00:16:00 -0800

Instrument Alat Uji Infrared Thermometer - IR 100 Extech

Infrared Thermometer merupakan alat uji yang sering digunakan karena kemudahannya mengukur suhu dari suatu kondisi. Selain karen bentuknya mini, alat ini mampu membaca suhu -34 to 446°F (-33 to 230°C) dengan jarak minimal 5 cm hingga 91 cm.

Fitur infrared Thermometer IR 100 Extech

• Temperature range from -34 to 446°F (-33 to 230°C)
• Economical mini size design for convenience
• Automatic Data Hold when measure button is released
• Max Hold or Min Hold
• Lock feature for continuous scanning
• Fixed emissivity covers 90% of surface applications
• Auto power off
• Complete with CR2032 3V battery

Applications:

• Measure hot spots in electrical panels and equipment
• In Process temperature measurements
• Measure surface temperature of objects that are unsafe to contact
• Measure surface temperature of objects that hard to reach

Jika anda berminat dengan infra Red Thermometer, anda bisa kirimkan inquiry

atau dengan menghubungi kami, permintaan anda akan kami respon segera dengan penawaran yang terbaik

Alat Uji Coating Thickness 262

noreply@blogger.com (Anonymous) — Mon, 4 Jan 2016 22:35:00 -0800

Instrument Alat Uji Ketebalan Cat Coating Thickness Gauge - Leeb 262

Seri terakhir dari coating thickness buatan leeb, dilengkapi dengan print out saat data diambil, Metode pengukuran dengan magnetik induction atau Eddy Current.

Fitur Alat Uji Coating thickness

Data transmission: USB, can be connected to the PC.
Rechargeable lithium-battery.
Wireless printing available.
Two methods of power off: Manual & Automatically.
Limit settings: alarm if one of the measurement data is beyond of the limits.
Deleting function: You can delete one of the doubtful data and you can also delete all of data in the memory to prepare for new measurement.
Saving function: capable of 500 sets of measurement value.
Two optional methods available to calibrate the gauge, and you can calibrate system error of the probe using basic calibration method.
Five statistical data: Mean Value, Maximum Value, Minimum Value, Measurement, Standard Deviation.

Measuring Material:

Non magnetic coatings on magnetic substrates (such as aluminum, chromium, copper, zinc, tin, rubber, paint on the steel, iron, alloy and magnetic steel) . (Fe)
Non conductive coating on non magnetic metal (such as rubber, plastic, paint, oxide on aluminum,copper, zinc, tin) . (NFe)

Berminat Dengan alat uji coating thickness seri 262, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon secepatnya dan kami berikan penawaran yang terbaik

Alat Uji Coating Thickness 250A Series

noreply@blogger.com (Anonymous) — Mon, 4 Jan 2016 20:23:00 -0800

Intrument Alat Uji Ketebalan Cat Coating Thickness Gauge - 250A/251A/252A

Alat uji ketebalan cat coating thickness gauge adalah alat uji dengan type non destructive artinya pengujian tanpa merusak specimen yang diuji.

Fitur Alat Uji Ketebalan Cat Coating Thickness Gauge

English menu.
One button operation.
Probe on the instrument, more compact size.

Measuring Material:

Non magnetic coatings on magnetic substrates (such as aluminum, chromium, copper, zinc, tin, rubber, paint on the steel, iron, alloy and magnetic steel) . (Fe)
Non conductive coating on non magnetic metal (such as rubber, plastic, paint, oxide on aluminum, copper, zinc, tin) . (NFe)

Anda berminat menggunakan alat uji ketebalan coating thickness seri 250A, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon cepat dengan pelayanan yang terbaik

Alat Uji Coating Thickness 250 Series

noreply@blogger.com (Anonymous) — Mon, 4 Jan 2016 19:38:00 -0800

Instrument Alat Uji Ketebalan Cat Coating Thickness Gauge - Leeb 250/251/252/253

Alat Uji Ultrasonic thickness merupakan alat yang dengan praktis dan mudah untuk mengukur ketabalan cat, baik basenya adalah Fe maupun non Fe.Perbedaan series 250 dengan yang lain adalah diameter minimum arenya lebih besar dan pada type 253 range pengukuran hingga 6000μm.

Fitur Coating Thickness Gauge 250 series

English menu.
One button operation.
Probe on the instrument, more compact size.
Leeb253 is especially for fireproof coating.

Measuring Material:

Non magnetic coatings on magnetic substrates (such as aluminum, chromium, copper, zinc, tin, rubber, paint on the steel, iron, alloy and magnetic steel) . (Fe)
Non conductive coating on non magnetic metal (such as rubber, plastic, paint, oxide on aluminum, copper, zinc, tin) . (NFe)

Berminat dengan alat uji coating thickness gauge, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon segera untuk kami berikan penawaran yang terbaik

Alat Uji Coating Thickness 230/231/232

noreply@blogger.com (Anonymous) — Mon, 4 Jan 2016 14:17:00 -0800

Instrument Alat Uji Ketebalan Cat Coating Thickness Gauge 230/231/232

Untuk kondisi yang buruk atau heavy duties, instrument alat uji coating thickness seri 230 sangat tepat karena casing berupa full metal. untuk fungsi dan fitur hampir sama dengan versi sebelumnya di 220.

Fitur alat uji coating thickness gauge 230/231/232

Fully enclosed metal shell, strong anti-interference ability, can be used in bad environment.
Two patterns of working: pattern of direct and pattern of group.
Two methods of power off: Manual & Automatically.
Show battery information in real time.
Limit settings: alarm if one of the measurement data is beyond of the limits.
Deleting function: You can delete one of the doubtful data and you can also delete all of data in the memory to prepare for new measurement.
Saving function: capable of 500 sets of measurement value.
Two optional methods available to calibrate the gauge, and you can calibrate system error of the probe using basic calibration method.
Five statistical data: Mean Value, Maximum Value, Minimum Value, Measurement, Standard Deviation.

Measuring Material:

Non magnetic coatings on magnetic substrates (such as aluminum, chromium, copper, zinc, tin,rubber, paint on the steel, iron, alloy and magnetic steel) . (Fe)
Non conductive coating on non magnetic metal (such as rubber, plastic, paint, oxide on aluminum, copper, zinc, tin) . (NFe)

Anda berminat dengan Alat uji coating thickness gauge seri 230, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon cepat untuk diberikan penawaran terbaik

Alat Uji Coating Thickness 220/221/222

noreply@blogger.com (Anonymous) — Mon, 4 Jan 2016 13:12:00 -0800

Instrument Alat Uji Ketebalan Cat Coating Thickness Gauge - Leeb 220/221/222

Alat Uji Coating Thickness Seri 220 merupakan alat uji yang digunakan untuk mengukur ketebalan cat, perbedaan dengan seri 210 adalah pada seri ini, probe dapat diganti-ganti sesuai order, selain itu pada seri 222 dapat digunakan langsung 2 probe magnetic induction dan eddy current.

Coating Thickness - Leeb 222

Berikut adalah fitur dari Alat Uji Coating Thickness 220/221/222

English menu.
Two patterns of working: pattern of direct and pattern of group.
Two methods of power off: Manual & Automatically.
Show battery information in real time.
Limit settings: alarm if one of the measurement data is beyond of the limits.
Deleting function: You can delete one of the doubtful data and you can also delete all of data in the memory to prepare for new measurement.
Saving function: capable of 500 sets of measurement value.
Two optional methods available to calibrate the gauge, and you can calibrate system error of the
probe using basic calibration method.
Five statistical data: Mean Value, Maximum Value, Minimum Value, Measurement, Standard Deviation.

Measuring Material:

Non magnetic coatings on magnetic substrates (such as aluminum, chromium, copper, zinc, tin, rubber, paint on the steel, iron, alloy and magnetic steel) . (Fe)
Non conductive coating on non magnetic metal (such as rubber, plastic, paint, oxide on aluminum, copper, zinc, tin) . (NFe)

Applikasi Industry

1. Metal Industry
2. Automotive Industry
3. Spare part and manufacture
4. Universities
5. Etc

Berminat dengan seri coating thickness seri 220/221/222, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon cepat untuk diberikan penawaran terbaik

Alat Uji Coating Thickness 210/211

noreply@blogger.com (Anonymous) — Mon, 4 Jan 2016 08:32:00 -0800

Instrument Alat Uji Ketebalan Cat Coating Thickness Gauge - Leeb 210/211

Alat Uji Protable Coating Thickness merupakan alat yang digunakan untuk mengukur ketebalan cat tanpa merusak lapisan cat (Non Destructive). Cara kerja alat ini dapat menggunakan magnetic induction untuk Fe dan menggunkan eddy current untuk non Fe.

Fitur Coating Thickness Leeb 210/211

English menu.
With settled probe.
Two methods of power off: Manual & Automatically.
Show battery information in real time.
Limit settings: alarm if one of the measurement data is beyond of the limits.
Deleting function: You can delete one of the doubtful data and you can also delete all of data in the memory to prepare for new measurement.
Saving function: capable of 500 sets of measurement value.
Five statistical data: Mean Value, Maximum Value, Minimum Value, Measurement, Standard Deviation.

Measuring Material:

Non magnetic coatings on magnetic substrates (such as aluminum, chromium, copper, zinc, tin, rubber, paint on the steel, iron, alloy and magnetic steel) . (Fe)
Non conductive coating on non magnetic metal (such as rubber, plastic, paint, oxide on aluminum, copper, zinc, tin) . (NFe)

Anda berminat dengan Alat Uji ketebalan Material, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon segera dan memberikan penawaran yang terbaik

Alat Uji Coating Thickness 242

noreply@blogger.com (Anonymous) — Mon, 4 Jan 2016 03:00:00 -0800

Instrument Alat Uji Ketebalan Cat Coating thickness gauge with Printer - Leeb 242

Alat Uji coating thickness 242 berbeda dari versi sebelumnya, dimana pada alat ini telah dilengkapi output ke pc dan printer bahkan bisa wireless printer.Alat Uji Ketebalan cat ini sangat tepat bagi anda yang membutuhkan kepraktisan dalam mengambil data dengan hasil on site.

Fitur alat uji coating thickness leeb 242

Two patterns of working: pattern of direct and pattern of group.
Automatic proofreading zero correction error, system.
Data transmission: USB, can be connected to the PC.
Wireless printing available.
Two methods of power off: Manual & Automatically.
Limit settings: alarm if one of the measurement data is beyond of the limits.
Deleting function: You can delete one of the doubtful data and you can also delete all of data in the memory to prepare for new measurement.
Saving function: capable of 500 sets of measurement value.
Two optional methods available to calibrate the gauge, and you can calibrate system error of the probe using basic calibration method.
Five statistical data: Mean Value, Maximum Value, Minimum Value, Measurement, Standard Deviation.

Measuring Material:

Non magnetic coatings on magnetic substrates (such as aluminum, chromium, copper, zinc, tin, rubber, paint on the steel, iron, alloy and magnetic steel) . (Fe)
Non conductive coating on non magnetic metal (such as rubber, plastic, paint, oxide on aluminum, copper, zinc, tin) . (NFe)

Anda berminat dengan seri Coating Thickness 242, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon cepat dengan penawaran terbaik

Alat Uji Surface Roughness 451/452

noreply@blogger.com (Anonymous) — Sun, 3 Jan 2016 14:46:00 -0800

Instrument Alat Uji Kekasaran Surface Roughness - Leeb 451/452

Instrument alat uji kekasaran permukaan benda atau surface roughness meruapakan alat yang digunakan untuk mengetahui kekasaran material, hal ini berkaitan dengan friksi yang mungkin terjadi serta proses mobilisasi benda serta pengaruh terhadap cetakan apabila benda tersebut untuk mencetak.

Fitur Surface Roughness merek leeb 451/452

Metal case, stronger and anti-electromagnetic interference .
Adapts high speed DSP processor to get fast reaction .
OLED color display, high light, no visual angle and wide temperature, could be used at each
workplace .
Built-in lithium ion chargeable battery
USB for connecting with PC or charging .
Auto power off and low power consumption design .
Transducer has production gate to guarantee the accuracy of testing .
Optimized electric circuit design with transducer structure design, high integrate power, driver and display.
Select freely with Ra, Rz, Rq, Rt parameters.
It could test excircle, flat surface, conical surface and also test groove with length and width larger than 80*30mm.

Applikasi Surface Roughness

Mechanical processing manufacturing industry, especially metal processing manufacturing.Non-metallic processing and manufacturing.
It can measure kinds of machining surface, including: oil pump nozzle matching surface of cylinder head, crankshaft, camshaft, cylinder, cylinder liner, cylinder, piston hole and surface roughness. At the same time can be applied to the PS version of measurement, online detection for setting and adjustment of the machine tool, tool wear loose or machining process.

Anda berminat dengan alat ini, kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon sesegera mungkin dan memberikan penawaran terbaik

Alat Uji Surface Roughness Leeb 432

noreply@blogger.com (Anonymous) — Sun, 3 Jan 2016 09:42:00 -0800

Instrument Alat Uji Kekasaran Permukaan Surface Roughness Leeb 432

Alat Uji Surface roughness merupakan suatu alat yang digunakan untuk menguji kekasaran pada permukaan, baik permukaan metal maupun non metal. berikut adalah spesifikasi dari Surface roughness leeb 432

Fitur Surface Roughness Leeb 432

With slip-up shell.,new design by LEEB 2015.
Can equip with measuring platform, so that can workpiece of any height. The platform can adjust the height of instruments, can also rotate the instruments 360 degree.
The sensor can be changed,so that we can test workpiece of any shape.Such as groove,hook
surface,hole,very small hole,can equip long sensor or lateral transfer sensor.
Design of mechanical and electrical integration is adopted to achieve small bulk, light weight.
Controlled by DSP chip, fast speed of testing with lower consumption and high precision.
Compatible of ISO/ DIN/ ANSI/ JIS standards.
128× 64 DOT matrix LCD displays all parameters and graphs, DSP chip is used to control and process data with high speed and low power consumption.
Four filtering methods of RC, PC-RC, GAUSS and D-P,
Built-in rechargeable lithium -battery,with high capacity and unlimited memory efficiency;Continuous working for more than 20 hours.
Can store more than 100 groups of measuring data and wave forms.
Low power consumption: Auto sleep, automatic shutdown function of saving energy;
USB,can be connected with computer and printer.

Spesifikasi Teknis

Anda membutuhkan alat ini, kirimkan inquiry

atau dengan menghubungi kami, permintaan anda akan kami respon sesegera mungkin dengan penawaran terbaik

Impact Device Hardness Tester

noreply@blogger.com (Anonymous) — Sun, 3 Jan 2016 08:11:00 -0800

Impact Device for Instrument Hardness Tester

Aplikasi dari beberapa type impact device untuk alat uji hardness tester

The bearings and other parts, heavy workpieces, metal material, pressure vessel, failure analysis of turbine generator unit and equipment
Mechanical or permanent assembly components have been installed, the test space is very narrow, requires the original record regular test results
Large workpiece within a wide range of more rapid test measurement site

Special Support Ring

Measuring Range

Technical Specification of Impact Device

Probe Ultrasonic Thickness Gauge

noreply@blogger.com (Anonymous) — Sun, 3 Jan 2016 02:31:00 -0800

Probe untuk Alat Uji Ketebalan Ultrasonic Thickness gauge

Standard Probe

Standard configuration probe : Ø10mm,5MHz, Measuring range:0.8-250mm,Temperature -10°C / 70°C

Optional Probe

Small diameter probe:Ø6mm,7MHz,0.7-50mm, Temperature -10°C / 70°C
Large diameter probe :Ø22mm,2MHz,2.5-350mm,Temperature -10°C / 70°C
High temperature probe:Ø14mm,5MHz,2.0-100mm,Temperature -10°C / 500°C

Calibration Block

Membutuhkan probe ini dapat mengirikan inquiry

atau dengan menghubungi kami, permintaan anda akan kami respon cepat dan kami berikan penawaran terbaik

Alat Uji Ultrasonic Thickness Leeb 352

noreply@blogger.com (Anonymous) — Sun, 3 Jan 2016 02:04:00 -0800

Instrument Alat Uji Ketebalan Plat Ultrasonic Thickness Gauge- Leeb 352

Alat Uji Ketebalan Portable Ultrasonic Thickness leeb 352 sangat tepat anda yang mengutamakan akurasi data, print out langsung, dan mudah dibawa kemana-mana. berikut adalah fitur dari leeb 352. Leeb merupakan merek dagang dari pembuat ultrasonic thickness gauge ini

Fitur Ultrasonic Thickness Leeb 352

Built in rapid thermal printer.
Automatic proofreading zero, on the system error correction.
Data transmission: RS232 interface, can be connected to the PC.
The unit of measurement, metric, inch optional.
A two-point calibration, can improve the accuracy of measurement.
Rechargeable Lithium battery.
Battery information indicates the rest capacity of the battery,Auto sleep and auto power off function to conserve battery life.
Display: LCD with LED backlight .The brightness and the contrast of the LCD is adjustable. And thickness value, coupling condition, power state, CAL calibration state, sound velocity.
Able to measure the ultrasonic velocity in turn if the thickness value is known in order to improve the measurement precision.
A two-point calibration, can improve the accuracy of measurement.
Nonlinear correction, automatic compensation, in order to improve the measurement accuracy.
Alarm function: setting the measurement limit and alarming for the results beyond the limit.
New design shell.

Measuring Material:

Adapted to measure the thickness of good conductor for ultrasonic, such as metal(steel, cast iron,
aluminum, copper), plastic, ceramic, glass, glass fiber and so on.

Applikasi Portable Ultrasonic Thickness Gauge

1. Metal Industry
2. Automotive Industry
3. Spare Part Indsutry
4. Plastic Industry
5. Oil and Gases Industry
6. Rubber Industry
7. Glass and Ceramic Industry
8. University
9. etc

Berminat dengan type ini kirimkan inquiry anda

atau dengan menghubungi kami, permintaan anda akan kami respon cepat dengan penawaran terbaik

Alat Uji Ultrasonic Thickness Dengan Printer

noreply@blogger.com (Anonymous) — Sun, 3 Jan 2016 01:00:00 -0800

Instrument Alat Uji Ketebalan Ultrasonic Thickness Gauge - Leeb 342

Alat Uji ketebalan Ultrasonic thickness gauge versi leeb 432 telah dilengkapi dengan print out, sehingga data yang diperoleh bisa langsung di print. Alat ini sangat tepat bagi anda yang membutuhkan kepraktisan dan memudahkan untuk analisa.

Fitur Ultrasonic Thickness Gauge 342

Built- in rapid thermal printer.
Automatic proofreading zero, on the system error correction.
Data transmission: RS232 interface, can be connected to the PC.
The unit of measurement, metric, inch optional.
A two-point calibration, can improve the accuracy of measurement
Rechargeable NI-MH battery.
Battery information indicates the rest capacity of the battery,Auto sleep and auto power off function to conserve battery life.
Display: LCD with LED backlight .The brightness and the contrast of the LCD is adjustable. And thickness value, coupling condition, power state, CAL calibration state, sound velocity.
Able to measure the ultrasonic velocity in turn if the thickness value is known in order to improve the measurement precision.
A two-point calibration, can improve the accuracy of measurement.
Nonlinear correction, automatic compensation, in order to improve the measurement accuracy.
Alarm function: setting the measurement limit and alarming for the results beyond the limit.

Measuring Material:

Adapted to measure the thickness of good conductor for ultrasonic, such as metal(steel, cast iron,
aluminum, copper), plastic, ceramic, glass, glass fiber and so on.

Applikasi Portable Ultrasonic Thickness Gauge

atau dengan menghubungi kami, permintaan anda akan segera kami respon untuk kami berikan penawaran terbaik

Alat Uji Ultrasonic Thickness Leeb 330 Series

noreply@blogger.com (Anonymous) — Sat, 2 Jan 2016 23:55:00 -0800

Instrument Alat Uji Ketebalan Ultrasonic thickness Gauge - Leeb 330/331/332

Portable Ultrasonic thickness merupakan alat yang digunakan untuk mendapatkan data ketebalan plat, apakah sudah sesuai standar yang diinginkan perusahaan atau belum. Seri leeb 330/331/332 ketebalan maksimum yang dapat diukur adalah 252 mm dan seri 332 lebih akurat 0.01 dengan kemampuan dapat menyimpan data sebanyak 200 data.

Fitur Ultrasonic Thickness leeb 330 Series

Whole metal case, Shielding interference efficiently.
Zero adjustment: auto returning to zero when you press the key after the probe is put on the specimen.
Data transmission: RS232 interface, can be connected to the PC
Battery information indicates the rest capacity of the battery,Auto sleep and auto power off function to conserve battery life.
Display: LCD with LED backlight .The brightness and the contrast of the LCD is adjustable. And thickness value, coupling condition, power state, CAL calibration state, sound velocity.
The unit of measurement, metric, inch optional.
Able to measure the ultrasonic velocity in turn if the thickness value is known in order to improve the measurement precision.
A two-point calibration, can improve the accuracy of measurement.
Nonlinear correction, automatic compensation, in order to improve the measurement accuracy.
Alarm function: setting the measurement limit and alarming for the results beyond the limit.

Measuring Material:

Adapted to measure the thickness of good conductor for ultrasonic, such as metal(steel, cast iron,
aluminum, copper), plastic, ceramic, glass, glass fiber and so on.

Applikasi Portable Ultrasonic Thickness Gauge

atau dengan menghubungi kami, permintaan anda segera mungkin kami respon dengan penawaran terbaik

Alat Uji Ultrasonic Thickness Leeb 320 Series

noreply@blogger.com (Anonymous) — Sat, 2 Jan 2016 22:51:00 -0800

Instrument Alat Uji Ketebalan Plat (Ultrasonic Thickness) - Leeb 320/321/322

Ultrasonic thickness gauge merupakan suatu instrument alat uji yang digunakan untuk mengukur ketebalan material logam, plastik, keramik, gelas, fiber glass. Berikut adalah fitur dari Ultrasonic thickness merek leeb 320/321/322.

Fitur Ultrasonic Thickness Gauge

Display: LCD with LED backlight .The brightness and the contrast of the LCD is adjustable.
Display contents: thickness value, coupling condition, power state, CAL calibration state, soundvelocity.
Able to measure the ultrasonic velocity in turn if the thickness value is known in order to improve themeasurement precision.
Zero adjustment: auto returning to zero when you press the key after the probe is put on the specimen.
Simply and easily operated.
Nonlinear correction, automatic compensation, in order to improve the measurement accuracy.
The test block of measuring sound velocity of known thickness.
Battery information indicates the rest capacity of the battery,Auto sleep and auto power off function to conserve battery life.
Optional software to process the memory data on the PC.
Alarm function: setting the measurement limit and alarming for the results beyond the limit

Measuring Material:

Adapted to measure the thickness of good conductor for ultrasonic, such as metal(steel, cast iron,

aluminum, copper), plastic, ceramic, glass, glass fiber and so on.

Applikasi Portable Ultrasonic Thickness Gauge

atau dengan menghubungi contact di bawah ini, kami akan merespon segera dan memberikan penawaran terbaik.

Alat Uji Hardness Tester Leeb 190

noreply@blogger.com (Anonymous) — Fri, 1 Jan 2016 18:54:00 -0800

Instrument Alat Uji Kekerasan Logam - Leeb 190 - Portable Hardness

Alat Uji kekerasan versi leeb 190 selain desain yang lebih menarik, disertai pula pengukuran yang semakin akurasi. Sehingga memudahkan anda dalam menganalisis material logam yang anda olah dan produksi.

Fitur Leeb Hardness Tester 190

New design based on depth-studying into hardness testing principle, high precision test all metal
materials.
Testing materials can be user-defined.
Easily switch to all hardness parameters (HL、HB、HRB、HRC、HRA、HV、HS).
Large Screen LCD color display,WINDOWS interface, menu operation, information rich, intuitive.
High brightness LED back-light, convenient in the dark.
USB communication interface, can be convenient, shortcut for data exchange and parameter se
tting on PC.
One main machine can be equipped with 7 different impact device, impact device can be aut
omatic identification. No need to re-calibrate after replacement.
Can store 600 groups of measuring data.
Limit alarm setting if measuring data is beyond the limit.
Plastic shell, resistance to vibration, shock, and electromagnetic interference.
Low power consumption: Auto sleep, automatic shutdown function of saving energy.
Ordinary alkaline battery, standby time 150 hours.
Software to connect PC for micro-printer.
Rechargeable lithium battery.

Measuring Materials:

All Metal.
Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper (bronze), forged steel.

Application on Industry

Metal Industry
Automotive Industry
Spare Part Industry
Contractor and Manufacturing
Reasearch Institute
etc

Anda berminat untuk portable hardness tester type leeb 190, kirimkan inquiry

atau anda dapat menghubungi

kami akan merespon sesegara mungkin dan memberikan pelayanan dan penawaran yang terbaik

Alat Uji Hardness Tester Leeb 160/170

noreply@blogger.com (Anonymous) — Fri, 1 Jan 2016 17:27:00 -0800

Instrument Alat Uji Kekerasan Logam - Hardness Tester Leeb 160/170

Alat portable hardness tester yang digunakan untuk menguji kekerasan material logam, seri leeb 160/170 memiliki fitur yang berbeda dengan sebelumnya, dimana parameter hardnessnya HL, HRC,HRB, HS,HB,HV,HRV,HSD

Fitur dari Leeb 160/170

On the basis of Leeb hardness measurement principle, can be used to detect a variety of metal
materials, accurate measurement value stability.
Can calibrate HL,HR,HB directly, it’s unique in China.
Instantly showing the hardness measurement, and can convert 8 different hardness format freely.
Can be configured to 8 different impact device, automatic identification device of impact type, can
replace the impact without being re-calibrate.
High brightness LED back light, convenient in the dark.
Built in rapid thermal printer can print the measurement data immediately.
Low power consumption: Auto sleep, automatic shutdown function of saving energy.
Small, portable, and accurate. Suitable for harsh operating environment, anti vibration, shock and
electromagnetic interference.
Ordinary alkaline battery, standby time 150 hours, suitable for field operation.
Continuous working time: 10 hours.

Measuring Materials:

Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper (bronze), forged steel.
Leeb 170 can also use for measuring the Roller.

Application

Metal Industry
Automotive Industry
Spare Part Industry
Contractor and Manufacturing
Reasearch Institute
etc

Berminat dengan alat uji kekerasan ini, kirimkan inquiry anda

atau dengan menghubungi kami di

Kami akan merespon anda sesegera mungkin dan memberikan penawaran dan pelayanan yang terbaik

Alat Uji Hardness Tester Leeb 140 dengan Printer

noreply@blogger.com (Anonymous) — Fri, 1 Jan 2016 12:13:00 -0800

Instrument Alat Uji Kekerasan Metal - Hardness Tester Leeb 140

Berbeda dengan Hardness Tester Leeb 130 Portable Hardness tester ini telah dilengkapi oleh printer, jadi hasil pengujian langsung terekam dan output bisa ditampilkan atau di print

Alat ini memiliki fitur sebagai berikut

On the basis of Leeb hardness measurement principle, can be used to detect a variety of metal
materials, accurate measurement value stability.
Can calibrate HL,HR,HB directly, it’s unique in China.
Instantly showing the hardness measurement, and can convert 6 different hardness format freely.
Can be configured to 8 different impact device, automatic identification device of impact type, can
replace the impact without being re-calibrate.
High brightness LED back-light, convenient in the dark.
Fully enclosed metal shell, strong anti-interference ability, can be used in bad environment. (Leeb130)
Built in rapid thermal printer can print the measurement data immediately.(Leeb140)
Low power consumption: Auto sleep, automatic shutdown function of saving energy.
Fully enclosed metal shell, strong anti-interference ability.
Ordinary alkaline battery, standby time 150 hours, suitable for field operation.

Measuring Materials:

Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum
alloy, copper zinc alloys (brass), an alloy of copper and tin, copper (bronze), forged steel

Application Industry and University

1. Metal Industry

2. Automotive Industry

3. Spare Part Metal Industry

4. Contractor and Manufacturing

5. Research Institute

6. University

Jika anda membutuhkan dengan type leeb 140 anda dapat mengirimkan inquiry

atau dengan mengubungi kami di contact di bwah ini

kami akan merespon segera permintaan atau inquiry, terima kasih atas kunjungan anda di web kami ,,,

Alat Uji Hardness Tester Leeb 130

noreply@blogger.com (Anonymous) — Tue, 29 Dec 2015 21:57:00 -0800

Instrument Alat Uji Portable Hardness Tester - Leeb 130

Sama seperti seri sebelumnya leeb 110 dan 130, fungsinya adalah untuk menguji kekerasan material logam, perbedaannya leeb 130, selain dapat dikoneksikan ke PC, casing alat terbuat dari metal. Berikut adalah spesifikasi dan fitur dari alat uji kekerasan leeb 130

Fitur Leeb 130

On the basis of Leeb hardness measurement principle, can be used to detect a variety of metal
materials, accurate measurement value stability.

Can calibrate HL,HR,HB directly, it’s unique in China.
Instantly showing the hardness measurement, and can convert 6 different hardness format freely.
Can be configured to 8 different impact device, automatic identification device of impact type, can
replace the impact without being re-calibrate.
High brightness LED back-light, convenient in the dark.
Fully enclosed metal shell, strong anti-interference ability, can be used in bad environment. (Leeb130)
Built in rapid thermal printer can print the measurement data immediately.(Leeb140)
Low power consumption: Auto sleep, automatic shutdown function of saving energy.
Fully enclosed metal shell, strong anti-interference ability.
Ordinary alkaline battery, standby time 150 hours, suitable for field operation.

Kirimkan inquiry anda dengan klik tombol dibawah ini

atau dengan menghubungi kontak dibawah ini, kami akan merespon sesegera mungkin untuk memberikan solusi dan penawaran

Alat Uji Hardness Tester Leeb 120

noreply@blogger.com (Anonymous) — Tue, 29 Dec 2015 19:04:00 -0800

Instrument Alat Uji Hardness Tester (Kekerasan Logam) - Leeb 120

Alat Uji kekerasan material logam merupakan salah satu metode untuk mengetahui sifat fisik material logam, dengan metode indentansi, kekerasan material dapat diketahui. Alat ini biasa digunakan untuk aplikasi di bagian quality control, khususnya industri metal, otomotif, spare part, fakultas teknik, dan lain-lain. (Instrument Alat Uji Indonesia)

Berikut adalah fitur dan spesifikasi dari Portable lebb hardness tester 120, perbedaan dengan leeb hardness 110 adalah pada leeb 120 dilengkapi dengan koneksi PC dan software untuk menampilkan data pengujian.

Segera kirimkan inquiry anda

atau dengan menghubungi kami, sesegera mungkin kami akan memberikan respon yang cepat dan tepat solusinya