La partie est commencée!

Hackulo.us a publié une nouvelle version de Installous avec de nombreuses nouvelles fonctionnalités. La raison pour laquelle ils ont décidés d’améliorer leur anciennce version de Installous est parce qu’ils veulent avoir plus d’utilisateurs que le nombre d’utilisateurs qui utilisent install0us par Puy0

En premier lieu, le design

Le design et l’utilisation de Installous par hackulo.us a été complètement changé. Ils l’ont fait presque identique à l’AppStore qui lui donne un air familier et  une navigation facile. L’application utilise des couleurs plus vibrantes que la version précédente, ce qui augmente la visibilité  sous exposition du soleil. Un désavantages et que l’icône peut être améliorée. Les fenêtres ” pop-up” annonçant les nouveaux téléchargements et installations sont également très minimalistes et attrayantes. En plus apptrackr.org est utilisé dans l’application.

Install0us 2.5.2 par Puy0 a également une interface utilisateur très bonne. Il utilise des couleurs sombres qui rend l’air agréable, mais il est difficile de voir sous le soleil. Les fenêtres pop-up annonçant la télécharge et installe sont très minimaliste et non obstructive. Les barres de téléchargement sont très gros et contient des informations importantes.

Nous donnons:

Installous par une hackulo.us 8 / 10

et

install0us par Puyo une 8.5/10

Dans l’ensemble, la décision sur laquelle on regarde plus beau est à vous.

Général:

Quelque chose que les utilisateurs install0us remarquerez d’abord sur Installous 3.1 est l’absence de consultation de sites web pour obtenir d’autres applications. Elle est limitée à apptrackr.org qui est une base de données de très grandes applications de craquage. Lorsque l’installation d’applications avec Installous 3.1, il apporte une popup avec tous les liens pour télécharger. C’est mieux que d’attendre la version mobile de apptrackr pour charger tous les liens. Vous pouvez également sélectionner à la volée qui pour parcourir vos applications. Soit par des applications et mises à jour, les applications et la popularité. Tout cela peut se faire sans nécessairement revenir à la page d’accueil du apptrackr.org

Installous par hackulo.us:

Pro:

1. Très belle façon de télécharger des applications
2. Chargement rapide des pages application
3. sélection rapide des catégories et sur la volée de commutation
4. Vous parcourez des images est également plus rapide (moins lag)

Con:

1. Pas flexible en termes de navigation d’autres sites.
2. Certaines images ne parviennent pas à la charge

Note: 8 / 10

install0us par Puy0 utilise un navigateur réel ce qui signifie que les pages se chargent moins vite que sur Installous. Une bonne chose d’avoir un navigateur, c’est que vous pouvez consulter n’importe quel site Web que vous souhaitez trouver une application manquants dans apptrackr. La vitesse de recherche utilisant la version mobile de apptrackr est un peu plus lent que sur la construction apptrackr.

install0us par Puy0:

Pro:

1. navigation flexible à de nombreux sites différents app
2. Capacité d’établir une page d’accueil
3. a fait un bouton Actualiser

Con

1. la lenteur de chargement des pages
2. La sélection des différents onglets qui font l ‘temps de chargement plus lent

Note: 7.5/10

Erreurs général:

install0us par Puy0 a à peine toutes les erreurs. La seule erreur que nous avons rencontrés, c’est que de temps en temps, la barre de navigation disparaît ce qui vous oblige à redémarrer l’application.

D’autre part, par Installous hackulo.us est encore en version bêta il contient encore de nombreuses erreurs. Certains d’entre eux sont les suivants:

1. Les icônes de catégorie dans l’onglet Parcourir disparaissent habituellement vous laissant avec seulement “Toutes les applications”
2. Parfois, les applications réelles ne se charge pas après avoir sélectionné une catégorie
3. Effacement de la catégorie et le cache des icônes ne fonctionne pas toujours
4. Il ya quelques plantage occasionnel lors de l’installation d’applications ou pendant la navigation Apps

Erreur sage, install0us par Puy0 a moins de bugs que Installous par hackulo.us. Le seul inconvénient est que Puy0 a cessé le développement de sa demande ce qui signifie que 2.5.2 est la version finale et contient toujours ce problème seul. Installous par hackulo.us a beaucoup de place à amélioration.

Nous donnons:

Installous par Hackulo.us un 7 / 10

et

install0us par Puyo un 9 / 10

Pour conclure, install0us par Puy0 est beaucoup plus stable que son concurrent, mais depuis le développement de l’application est terminée hackulo.us pouvez facilement faire mieux que install0us. Donc, pour l’instant Puy0 gagne le match avec un 8,5 sur 10 contre hackulo.us qui a 7 / 10

Note de fin:

Installous par Hackulo.us 8 / 10

install0us par 8.5/10 Puy0

The game is on!

Hackulo.us has released a new version of Installous with many new features. It was probably because they want to gain more users and to turn the users that use install0us by Puy0, a former of Installous by hackulo.us.

First comes the design

The look and feel of Installous by hackulo.us has been completely revamped. They have made it almost identical to the AppStore which gives it a familiar look for easy navigation. It uses very brighter colors than the previous version which makes it easier to see while being exposed to the sun. The icon could be improved though.  The popups announcing new downloads and installs are also very attractive. Since apptrackr.org is actually implemented in the app, the picture scrolling

Install0us 2.5.2 by Puy0 also has a very good user interface. It uses dark colors which makes it look nice but it is hard to see under sun exposure. The popups announcing the downloads and installs are very  minimalistic and non-obstructive. The download bars are very big and has important information.

We give:

Installous by hackulo.us an 8/10

and

install0us by Puyo an 8.5/10

All in all, the decision on which one looks nicer is up to you.

General:

Something that install0us users will notice at first on Installous 3.1 is the lack of browsing other websites to get applications. It is limited to apptrackr.org which is a very big database of cracked apps. When installing apps with Installous 3.1, it brings a popup with all the links to download. It is better than to wait for the mobile version of apptrackr to load all the links. You can also select on the fly which way to browse your apps. Either by apps & updates, apps and popularity. All this can be done without necessarily going back to the home page of apptrackr.org

Installous by hackulo.us:

Pro’s:

1. Very nice way to download applications
2. Fast loading of the app pages
3. Fast selection of categories and on-the-fly switching
4. Browsing images is also faster (Less lag)

Con’s:

1. Not flexible in terms of browsing other websites.
2. Some images fail to load

Rating: 8/10

install0us by Puy0 uses an actual browser which means that the pages load less fast than on Installous. One good thing about having a browser is that you can browse any website you want to find a missing application in apptrackr. The search speed using the mobile version of apptrackr is a tad slower than on the built in apptrackr.

install0us by Puy0:

Pro’s:

1. Flexible browsing to many different app sites
2. Ability to set a home page
3. Actually has a refresh button

Con’s

1. Slow loading of pages
2. Selection of different tabs which make                                                                                 s the loading time slower

Rating: 7.5/10

General Errors:

install0us by Puy0 barely has any errors. The only error we have encountered is that once in a while, the browser bar disappears which requires you to restart the application.

On the other hand, Installous by hackulo.us is still in beta so it still contains many errors. Some of them are:

1. The category icons in the browse tab usually disappear leaving you with only “All applications”
2. Sometimes the actual apps don’t load after selecting a category
3. Clearing the category and the icons cache doesn’t always work
4. There are some occasional crashing while installing apps or while browsing apps

Error wise, install0us by Puy0 has less bugs than Installous by hackulo.us. The only downside is that Puy0 has stopped the development of his application which means that 2.5.2 is the final version and will always contain that single problem. Installous by hackulo.us has a lot of room for improvement.

We give:

Installous by Hackulo.us a 7/10

and

install0us by Puyo a 9/10

To conclude, install0us by Puy0 is much more stable than its competitor but since the development of the app is terminated hackulo.us can easily make it better than install0us. So, for now Puy0 wins the match with a 8.5 out of 10 beating hackulo.us which has 7/10

End Rating:

Installous by Hackulo.us       8/10

install0us by Puy0                  8.5/10

1. Go to this link.
2. Once at the home page, scroll down to the download section. Select the download file according to which operating system you are running.
3. After completing the download, you can either double-click on the file, or right click and select “Open”.
4. A small window will open, select “Run”.
5. Once the program opens, wait a second or two to let it detect your device.Then, press the “Jailbreak” button and just wait.

It only takes a few seconds, and then your done.Wait until your device restarts and your done.

**TROUBLESHOOTING**

If you are using Windows 7 or Windows Vista, you may get this error message.

To fix this problem, all you need to do is follow these easy steps:

1. Right-click on the “Spirit.exe” file and select the “Properties” option.
2. Once the “Properties” window opens, select the “Compatibility” tab.
3. In this tab, check the “Run this program in compatibility mode for:” square
4. Select Windows 95 and apply these settings.
5. Repeat steps 3 through 5 and enjoy!

For any comments or questions, feel free to write them in the comment box below. Thanks for reading!

So for those of you who just recently purchased an iPod touch/iPhone or made the mistake to upgrade, be strong. The end of this suffering is near!

1. You will need to download Blackra1n if you don’t have it already
2. Download this patcher called BlackFreeze
   • BlackFreeze Download Link
3. Run the BlackFreeze (Run as administrator on vista and windows 7 to avoid problems)
4. This will show up
   
5. Simply click on “Fix my Ra1n!”
6. You well then need to locate the original blackra1n file you downloaded from blackra1n.com
   
7. When you located it, Press on open
   
8. BlackFreeze will then prompt you to choose a place to save the Fixed Blackra1n
   
9. Save it and voila! You are done and you can run BlackRa1n Whenever.
   

There are two ways of doing this.

1. If you already have a jailbroken device
2. Open Cydia and make sure you get this page
   
3. Once you get it, Just select “Make my life easier, Thanks!”
4. Now every time you are going to load Cydia you will have this at the top of the Cydia page
   

Doing this will store your SHSH file on Saurik’s (Cydia) server and will enable you to downgrade later on.

It’s not done yet. To be safe, Make sure to make a backup on your computer and this is how to do it.

1. Download this file made by iH8Snow
   1. http://www.mediafire.com/?jmkw4k0wm00
2. Make sure that your device is in recovery mode
   1. Connect your device to the computer
   2. Press and hold the power + Home button until the “Connect to iTunes” logo appears
3. You also have to make sure you have Java Runtime installed on your computer. If you don’t, the second message your are going to get just press no and AutoSHSH is going to redirect to the download page.
   
4. Launch the AutoSHSH program – Make sure you have an Internet Connection (Windows Vista and Windows 7 launch the program as administrator)
   1. You will get these two messages
      
5. You will then get this main window
   
6. Again make sure that your device is in recovery mode and click on “Grab my SHSH Blobs automatically”
7. Once it finds your ECID, you will be prompted to save the SHSH file anywhere on your computer
   
   
8. Save it and you are done!
   

Now you are safe to accidentally update your firmware and to go back.

1. Using your favorite SSH client, or a way to access your device through USB or simply with iFile go to System/Library/CoreServices/SpringBoard.app/English.lproj/
   
2. Find the file called SpringBoard.Strings
3. Backup up the file
4. Open it with a text editor
   
5. Now find any text you want, For example Slide to unlock
6. When you will find it, It will look like this

   “AWAY_LOCK_LABEL” = “slide to unlock”;

7. What you will now have to do is edit the “slide to unlock” part and NOT the “AWAY_LOCK_LABEL
8. Once you are done editing The Strings you want. Simply save the file and Respring.
   

**Note: “SB” settings stand for SpringBoard settings.

To access your SBSettings home, simply swipe your finger at least 50 pixels across the status bar.What will come down is this:

Here you can right away see 4 main options, Brightness, Processes, SSH and Wi-Fi.

The brightness tab is pretty straight forward, simply press the button and adjust your brightness on the fly, without have to exit whatever you are doing, go to the settings application, waiting for it to load… etc.

The processes tab allows you to view all applications running in the background, so if you find that your device is running a lot slower than it should be, try ending a few useless processes this should make a lot more memory available and allow you to continue using your iPod Touch/iPhone nice and smoothly. There is also a “Free Up Memory” button, will free up any available memory to make your device faster.

The SSH button lets you toggle your SSH connection. If you have no idea what SSH is, or how to use it, go to this tutorial. Disabling this feature can help save battery power, which is great when you are already running low.

And finally, Wi-Fi. Same as the SSH button, you will toggle your connection to the internet, which will save more battery than just by disabling SSH.

Now, for the smaller icons, there is: More, Refresh, Dock, Respring and Power.

By clicking on “More”, you will close the SBSettings drop down menu and open the actual application. you can now adjust a lot more that just brightness.

Firstly, is the themes pages. Yes, you can apply themes to your SBSettings menu, there are 4 main ones already given, however Cydia offers a wide array of themes created by other people.

Then there is the “Set Toggles” tab. The name of the tab is pretty self-explanatory. You can add to the 4 main toggles. A very useful one to have is “Fast Notes”, for when how have to take something down real fast, but don’t have a pen or a piece of paper and loading the notes app would just be too long.

Next on the list is “Dock Applications”. As I mentioned before, on your SBSettings drop down menu there is a Dock button, here is where you select the applications you wish to be placed there. Let’s say you have an application that you don’t use, but still sometimes need to access and find it a waste of space on your home screen, you can select that application so that it goes to your SBSetting dock. By doing so, it is out of sight, but can still easily be accessed.

The “Hide Icons” tab lets you select apps that you don’t want one your home screen but then cannot be accessed through any means, except by “unhiding” them.

The next tab, “Mobile Substrate Add-ons” is used to toggle faulty add-ons so that they can then be removed through Cydia.

Extras are little options like memory in status bar, numeric battery and much more.

And finally the last page, “App Folders” simply gives you the directory in which a chosen app is found. The point? We haven’t really figured that out yet really, seeing that all AppStore apps are in the same directory and Cydia in one own.

So that’s it for the “More” button on the drop down menu, so lets get back to that.

The refresh button will refresh your IP info, available storage and available memory.

The dock button, as I said previously, allows you to quickly access apps pre-selected in the “More” page.

The “Repsring” button will simply respring your device. This comes in handy when, for example, you are transferring files through SSH and need to update your device.

And last but not least, the “Power” button. When pressed, you are given 4 power options. Reboot (useful if your lock button is broken), Power Off (also very useful if lock doesn’t work), Lock and Safe Mode, this is especially useful if you have just installed a cracked application and it keeps crashing, put your device in safe mode and it might run perfectly, if not, the .ipa is invalid.

When you are at your cottage, country house or anywhere you don’t have Wifi but you want to play a game with a friend that also owns an iDevice you can play games or send files to each other using a fake Wifi!

1. You will need to download MyWi from cydia. Make sure you download the No Rock version. You can get it from the Xsellize repo or you can use the download link below (This app should be installed on a device that HAS Bluetooth)
   1. http://www.mediafire.com/?yfqzdfgmmti
2. If you downloaded the emulator from the first link, refer to this tutorial on how to install .DEB files : Installing .DEB Files
3. Make sure you turn on Bluetooth in the Settings App
   
4. Once you have installed it launch the application
5. You are now going to make your fake Wifi network using your bluetooth connection
6. In “Wifi Name”, change it to whatever you want. In this case, We called it Network Test
   
7. Leave the Wifi Channel as is. If ever you are having trouble connecting change the channel to another one and test again
8. You can add a security key if you don’t want anybody else to log in to your fake network
9. Make sure USB and Bluetooth is set to “On”
10. You can now turn on Wifi Tethering – At the bottom you will see (Status: MyWi Broadcasting “Network Test”)
    
11. Wait until the Wifi logo appears at the top of the status bar
    
12. On the other device, Go to Settings and Wi-Fi and select The network Name you chose. On the device where MyWi is running, You can close the app because it runs in the background
    
13. Wait for the Wifi logo to appear on the other device
14. You can now either play games together or transfer files using the Wifi transfer feature in iFile

For a while, the only utility for bluetooth on the iPhone was just to connect to a Bluetooth headset and that was practically it. With an App called iBlueNova, you can now share files between not only iPhones but any phone that has Bluetooth.

1. You will have to install iBlueNova. You can either get it from CydiaStore(Paid) or from any source(Xsellize, iSpazio etc) or the .deb file provided below.
   1. iBlueNova Download
2. If you downloaded the emulator from the first link, refer to this tutorial on how to install .DEB files : Installing .DEB Files
3. Once you downloaded, Launch the app
   
4. Turn “Enable” On
   
5. If you want your device to be discoverable set “Visible” to On
   
6. Scroll down to the file manager part and select what you want to transfer
   1. Pictures
   2. Music
   3. Videos
   4. Other files
      
7. Browse through your files and select what you want to transfer
   
8. Select “Send to Device”
   
9. Choose the bluetooth device you want to send your file to
   
10. It’s going to connect and prompt the other device to accept. Once you accept the file will transfer!