Art Diary Blog

noreply@blogger.com (Isreal Mathew) — Wed, 22 Feb 2012 11:51:00 +1100

I really don't know what I'm doing...

noreply@blogger.com (Isreal Mathew) — Wed, 22 Feb 2012 11:48:00 +1100

Test of AnyPost

Grad Show Setup

noreply@blogger.com (Isreal Mathew) — Mon, 28 Nov 2011 22:04:00 +1100

Assess Wk2 - Assessment Setup

noreply@blogger.com (Isreal Mathew) — Tue, 22 Nov 2011 12:14:00 +1100

Assess Wk1 - Another 13.5 hours on the Plinths...

noreply@blogger.com (Isreal Mathew) — Sat, 19 Nov 2011 00:08:00 +1100

I went to Bunnings and got some more braces for the front of the plinths, also some strips to cover the exposed particle board and the screw holes on the top.

After 13.5 hours... a total of 28.5 hours here are my plinths:

Completed plinths in approx. arrangement for assessment.

Assess Wk1 - 15 hours = blisters, swelling, bruising.

noreply@blogger.com (Isreal Mathew) — Fri, 18 Nov 2011 08:49:00 +1100

Basic plinth structure.

I've successfully built my plinths. I think they still need one more brace on the front so I'll go to Bunnings again this morning to get those extra bits.

Bruised, swollen and callused.

I was working on them from 1:30pm - 4:30am. My right hand is very swolen, I have a couple blisters on that hand and it's really bruised. I likely need medical attention for it.

Worst part of the process, other than the hand... realising after puting together frame 5 that the last four had been constructed with the left and right side panels on the wrong side... thus requiring deconstruction... Melamine particle board chips very easily when being unscrewed. They don't look near as neat as they did. :( Oh well.

Assess Wk1 - Plinth = Milk crate of the art world

noreply@blogger.com (Isreal Mathew) — Tue, 15 Nov 2011 20:16:00 +1100

Now that my assessment for Video is done and the majority of non-major tasks are behind me, I decided today to chase up plinths again...

Today I went from Build My Own to covered Milk Crates to Build My Own... this is what I've decided to do.

On the milk crate idea... I had considered these previously but I was concerned about stability. I went to Music School Cafe who said I could borrow the 23 crates I'd need from their stash... Unfortunately, they'd been recently collected and had none... I called Capital Chilled Foods who collect them and they stated categorically that they do not lend them out... that I should try Scholle, the company they purchase them from... I checked their website... it became too hard so I went to Bunnings instead.

So, design-wise...

Plinth design sketches/calculations

1)
Four sides plus a top at about 1200 high, 30-40cm wide... I found the following at Bunnings:

Dressed Pine: 1200 x 290 x 19 = $13.18
((6 x 4) + 2) x $13.18 = $342.68

Melamine White: 1200 x 295 x 16 = $7.30
((6 x 4) + 2) x $7.30 = $189.90

2)
New Design... 3 sides, one top...
Melamine White: 1200 x 295 x 16 = $7.30

((6 x 3) + 2) x $7.30 = $160.60

Worried about stability, being weighted wrong...

Only two sides but a top and bottom with brackets for bracing...

((6 x 2) + 4) x $7.30 = $116.80

Decided design

Now, that's only for the panels, not screws and brackets... But it's looking much more affordable.

Just want to run the design past a few others before I start construction... hopefully tomorrow.

Assess Wk1 - New picture of both my Mandelboxes

noreply@blogger.com (Isreal Mathew) — Mon, 14 Nov 2011 09:24:00 +1100

Left: White, Strong and Flexible. Right: Sandstone.

Assess Wk1 - 'Silhouette' on YouTube

noreply@blogger.com (Isreal Mathew) — Mon, 14 Nov 2011 08:42:00 +1100

So, I've finally got an edit I'm reasonably happy with... I think this is it...

Break Wk3 - 5 Year Career Plan

noreply@blogger.com (Isreal Mathew) — Sun, 13 Nov 2011 23:53:00 +1100

That was an interesting experience. I've written my 5 year plan. It clarified that I still really don't know what I want. I'm sure that will eventually crystalise.

Break Wk3 - I'm going mental! The Birds! The Birds!

noreply@blogger.com (Isreal Mathew) — Thu, 10 Nov 2011 23:25:00 +1100

Just a quick note to highlight that my schedule at the moment is mental and as a result, I'm going mental. I'm finally back to the bird transition. It's nice working in Nuke. But with 32 frames, all offset and mirrored to produced different shapes and with 52 feathers... this final sequence it doing my head in. Argh!

Break Wk3 - 6 minute length

noreply@blogger.com (Isreal Mathew) — Wed, 9 Nov 2011 21:28:00 +1100

A quick note that I asked Alistair and Lucien today about the 6 minute length... I was concerned that it was to long for ARC.

They both advised that it wasn't too long and they agreed that the 2min 30second lead-up/tension was good.

Break Wk3 - Met Alistair re new version of Sound.

noreply@blogger.com (Isreal Mathew) — Wed, 9 Nov 2011 13:36:00 +1100

The new version of my sound is ready for Alistair's opinion.

I've normalised the base sounds, re-recorded the spacial movement and in the end had to replace what I call the 'clash' sounds... I ended up using my voice. :) I'm pretty happy with the result, though I do feel that it's still missing something.

...

Thus, I met with Alistair today. He said he liked it but if I had more time, he had a few changes worth looking into:

1. a) high harmonics, b) Evolve , c) should be consistent throughout, not off and on.

2. Active sound - change over time, show progression.

3. Add some panning, nothing too drastic

4. 3D Sound

I can't do anything about these suggestions yet... Will definitely do it later though.

Break Wk3 - Catalog DVD Render uploaded to Vimeo

noreply@blogger.com (Isreal Mathew) — Wed, 9 Nov 2011 00:05:00 +1100

In preparation for the Catalog DVD, I've finished my latest render and uploaded it to Vimeo.

Break Wk3 - Recolour/Reformat/Tweak Multi-screen Render

noreply@blogger.com (Isreal Mathew) — Tue, 8 Nov 2011 23:12:00 +1100

Worked out the kinks with my single-screen render and adjusted the colouring to make the distance parts pop a bit better. I attached the sound and now it's ready for uploading and getting the opinion from others.

Break Wk3 - Grad Show AV Requirements

noreply@blogger.com (Isreal Mathew) — Mon, 7 Nov 2011 18:15:00 +1100

Chris has asked for our requirements from an AV requirement perspective. My e-mail:

I'd require the 5 iMacs on plinths (still organising plinths... I hope), with associated power... minimum 1 keyboard and mouse for setup... iMacs will communicate with each other via a wireless connection with each other. An additional plinth will sit nearby to display my two objects. I'd prefer to have sound coming from the installation but if headphones are needed then that's fine... Otherwise, I'd like to connect my 2.1 speaker setup, thus meaning 6 power points.

From a location perspective, if it out in the open, I'd like it to be in a corner, not facing a light source (ie, window) so that I avoid glare.

If you require more info or to discuss further, please advise.

The response:

We are going to to have to be creative, as I don't think we have 5 iMacs. I understand we have 13 for the entire show! Can you outline a possible alternative?

We will get your work installed and looking impressive, somehow.

The logistics of moving from 5 to 3 seems impossible in my head. Apparently I need a backup though... I don't know.

Chris said to have a look at the spot he thinks will work for me... I've taken a photo of it:

Wk13 - Online Profiles/Identities

noreply@blogger.com (Isreal Mathew) — Sat, 5 Nov 2011 20:07:00 +1100

I've tidied up and updated my various online profiles... Tumblr, Facebook, Twitter, Blogger, Google, etc. Not finished yet but getting there.

Wk13 - Artist Statement

noreply@blogger.com (Isreal Mathew) — Fri, 4 Nov 2011 15:49:00 +1100

I submitted my 3 copies of my Artist Statement today.

My Artist Statement:

‘Tglad’s Formula” – Terence Craig

Tglad is the father of the ‘Mandelbox’, an exciting 3D formula-based object which eluded mathematicians and computer scientists for 30 years.

I create video that explores scale and texture. I have been inspired by the Mandelbox. This is also my first experience-based video installation and the first work I’ve produced which crosses from the computer into the physical world, in the form of an accompanying sculpture.

The Mandelbox is based on a 3D fractal formula. In simple terms, a fractal is a recursive (self referencing) mathematical equation that produces shapes, built by parts that are similar with itself at an infinite scale. Tom Lowe (Tglad) discovered this particular fractal formula in 2010. The name Mandelbox is derived from the name of the man who developed the 2D formulas in 1979, Benoît Mandelbrot.

By changing the numbers that the formula needs, you can produce your own forms. The aim for my work entitled, ‘Tglad’s Formula”, was to investigate this area of fractal geometry and find a form that is both visually interesting to experience as a fly-thru and is also capable of being realised in physical form using 3D printing. Unfortunately, these two concepts are mutually exclusive. The more interesting Mandelbox forms are far from solid, yet to produce something physical using 3D printing techniques, it needs to be in one piece.

Due to its complex nature, theoretically, the Mandelbox cannot be realised in physical form. Balancing and compromising on form and fly-through requirements has been difficult but rewarding. The five screens produce an immersive experience and the physical objects reinforce the scale, complexity and beauty of such fractal-based forms.

---

Wk13 - Test 5 screen setup

noreply@blogger.com (Isreal Mathew) — Thu, 3 Nov 2011 11:47:00 +1100

JP helped me organise 5 screens to confirm whether a 5-screen installation will work. Ty helped me with setup.

I set up a shared wireless network and had all 5 running from the same machine's network. Worked a treat. No lag on playback.

Very happy.

Wk13 - Met with Alistair re: Audio/LFO's

noreply@blogger.com (Isreal Mathew) — Thu, 3 Nov 2011 11:18:00 +1100

I've been working on sound for the Mandelbox for the last couple days. The base sounds are only LFO's... It seems though that it is always too quiet despite what I do... I'm not sure what was going on.

I met with Alistair and he thinks that either the speaker thingy isn't centred or more likely that the base sounds needed to be normalised... something I forgot to do.

Wk13 - Working on the multi-screen render

noreply@blogger.com (Isreal Mathew) — Tue, 1 Nov 2011 22:27:00 +1100

I came up with a better version of the calculations for the single screen render. Been working on it for a couple days now.

Calculations for single screen version.

Because the fractal appears differently depending on the angle you view it, stitching the five angles together is proving difficult. I've done relatively well with it though.

Node Graph for my single-screen render.

The merge continually changes but because it is projected onto the back of a sphere, the resize isn't noticeable.

The stitched together version of the 5 screens.

Stitched screens projected onto a sphere.

Wk13 - Honours Proposal Prepared & Submitted

noreply@blogger.com (Isreal Mathew) — Mon, 31 Oct 2011 16:14:00 +1100

Finished the honours proposal and showed it to Martyn. He happily signed it. :)

Wk13 - Decision time - Flower + Bird = Flird.

noreply@blogger.com (Isreal Mathew) — Mon, 31 Oct 2011 13:47:00 +1100

Looking back, I've enjoyed playing and experimenting with various cameras and perspectives but there comes a time when you much decide what you're going to submit... thus after the whole fishbowl incident, I've decided to go with the footage I already have of the flower since it's interesting and with limited success, I'm going to attach the birds to it... Cross fingers.

Wk12 - GoPro saved by Shoelace!!!

noreply@blogger.com (Isreal Mathew) — Sun, 30 Oct 2011 17:15:00 +1100

So, I have a bit of a story to tell today - I attached the GoPro to the side of my car today... just thought I'd check out the perspective... anyway... teach me to clean the surface first... I was about 3 minutes into my drive, doing 80km/h and the GoPro suction cup gives way... luckily I've been using a shoelace as a safety-rope... it luckily held and the camera didn't go flying but two lessons: 1) be paranoid 2) clean a surface before using a suction cap on it. Hmmm.

Wk12 - Broke Toad Hall Fish Bowl. Brilliant. :(

noreply@blogger.com (Isreal Mathew) — Fri, 28 Oct 2011 21:04:00 +1100

In an effort to use a larger bowl with the flower as Riley suggested, I borrowed the Toad Hall one... yeah, broke it before I could use it. Brilliant. Not.