Welcome to Itstuffs

Routing Tables in Windows

noreply@blogger.com (Shahbah) — Mon, 13 Feb 2012 23:06:25 PST

DISPLAY ROUTING TABLES IN WINDOWS

Goto RUN and type cmd

In command prompt type the command netstat -rn

C:\>netstat -rn

Result :

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.0.0.10 192.0.0.93 266
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.0.0.0 255.255.255.0 On-link 192.0.0.93 266
192.0.0.93 255.255.255.255 On-link 192.0.0.93 266
192.0.0.255 255.255.255.255 On-link 192.0.0.93 266
192.168.1.0 255.255.255.0 On-link 192.168.1.16 266
192.168.1.0 255.255.255.0 On-link 192.168.1.15 266
192.168.1.15 255.255.255.255 On-link 192.168.1.15 266

Purchase Requisition Release Process

noreply@blogger.com (Shahbah) — Sat, 31 Dec 2011 06:37:05 PST

Purchase Requisition Release Processing Step by Step

Individual Release of a Purchase Requisition—ME54

Some purchase requisitions may require approval before they can be converted into a RFQ/Purchase order. The approving party may change a requisition that is subject to approval before it is released.

Enter the transaction code ME54 in the command field on the main
SAP R/3 screen.

The following screen is displayed:

1. Enter the purchase requisition number.
2. Enter the release code. In this example, the release code is IT.
3. Click on the Enter button or press Enter to display the
Release: Purchase Requisitions: Item Overview screen:

4. Click on the button(s) to the left of the line item(s) for approval.
5. To select all items, click on Edit Selections Select All.
6. When ready to release, click on the Release + save button (not the Release with the lock) or press F8 to display the Initial Screen.
7. Click on the Exit button or press Shift+F3 until the initial SAP R/3 System screen is displayed.

Collective Release of a Purchase Requisition—ME55

A collective release of purchase requisitions allows several purchase requisitions to be approved simultaneously and is executed when several requisitions sharing similar criteria must be released. A collective release of purchase requisitions functions similarly to list display transactions. Selection criteria, such as the release code, purchasing group and plant, are entered in the initial screen. All purchase requisitions meeting the selection criteria are displayed.

Enter the transaction code ME55 in the command field on the main
SAP R/3 screen.

The following screen is displayed:

1. Enter the release code.
2. Enter the purchasing group.
Note: You can enter additional information in other fields such as Document type, Delivery date, etc
which will narrow down your search.

3. Click on the Execute button to display the Collective Release of Purchase Requisitions screen.
The following screen is displayed:

4. Click on the check box to the left of the desired purchase requisition item(s) and press F9 to select.
5. Click on the Save button or press Ctrl + S to save the release.

The following green lines (with information on additional release codes) are displayed:

6.Click on the Exit button or press Shift+F3 until the initial SAP R/3 System screen is displayed.

CBT Nuggets MCDST Certification Package

noreply@blogger.com (Shahbah) — Wed, 09 Dec 2009 00:54:01 PST

The Microsoft Certified Desktop Support Technician (MCDST) is one of the newest certification offerings from Microsoft. Designed to teach you the basics of supporting end-users on the Windows XP operating system and desktop applications, this training covers the topics and concepts that map to exams 70-271 and 70-272.

Instructor Todd Logan takes time to cover all the information you’ll need, not only to pass the exam, but to be able to do the job. Todd is our XP expert and you’ll appreciate his use of diagrams, examples and real-world analogies along with his upbeat and fun delivery of the material.
These videos were developed for the help desk person who is relatively new to Windows XP Professional and needs to be able to support end-users regarding issues with the XP operating system, MS Office, Internet Explorer and Outlook Express as well as troubleshoot desktop configuration problems. You’ll also learn about Microsoft’s new Service Pack 2 offering; from installation and compatibility to new features and changes.

There are 34 videos, providing more than 17 hours of instruction. A basic understanding of computers and networking, such as the A+/Network+ Combo Pack is recommended before viewing this training.

Download links:

http://rapidshare.com/files/233695042/C.N.M.C.P.part01.rar
http://rapidshare.com/files/233693677/C.N.M.C.P.part02.rar
http://rapidshare.com/files/233695201/C.N.M.C.P.part03.rar
http://rapidshare.com/files/233696800/C.N.M.C.P.part04.rar
http://rapidshare.com/files/233693986/C.N.M.C.P.part05.rar
http://rapidshare.com/files/233697127/C.N.M.C.P.part06.rar
http://rapidshare.com/files/233692585/C.N.M.C.P.part07.rar
http://rapidshare.com/files/233695140/C.N.M.C.P.part08.rar
http://rapidshare.com/files/233693855/C.N.M.C.P.part09.rar
http://rapidshare.com/files/233689806/C.N.M.C.P.part10.rar

CBT Nuggets Check Point CCSA

noreply@blogger.com (Shahbah) — Wed, 09 Dec 2009 00:39:20 PST

Check Point is the global leader in IT security, and Check Point CCSA certification says you’ve got the expertise to handle corporate security needs. Trainer Bobby Meador’s step-by-step instructions show you how to improve the security of your current Check Point firewall deployment or build a Check Point security solution from the ground up. This series maps to Check Point’s Certified Security Administrator NGX R65 156-215.65 exam. Passing the test earns you Check Point CCSA certification.

Prerequisites

Suggested prerequisites include an understanding of networking (such as Cisco CCNA or CompTIA Network+), Windows (such as 70-642 MCTS Windows 2008 Network Infrastructure, Configuring), or Linux (such as CompTIA Linux+).

Download

http://hotfile.com/dl/17695094/26c6212/CBT.CheckPoint.CCSA-.part1.rar.html
http://hotfile.com/dl/17695104/eff8dfd/CBT.CheckPoint.CCSA-.part2.rar.html
http://hotfile.com/dl/17695111/2777dd7/CBT.CheckPoint.CCSA-.part3.rar.html
http://hotfile.com/dl/17695118/6fbd7bc/CBT.CheckPoint.CCSA-.part4.rar.html
http://hotfile.com/dl/17695123/9190a2b/CBT.CheckPoint.CCSA-.part5.rar.html
http://hotfile.com/dl/17695131/c48b18b/CBT.CheckPoint.CCSA-.part6.rar.html

Password: booktraining.org

Mirror download:

http://rapidshare.com/files/292272465/CNCPCCSACSANR65.part1.rar
http://rapidshare.com/files/292272685/CNCPCCSACSANR65.part2.rar
http://rapidshare.com/files/292273319/CNCPCCSACSANR65.part3.rar
http://rapidshare.com/files/292272590/CNCPCCSACSANR65.part4.rar
http://rapidshare.com/files/292273336/CNCPCCSACSANR65.part5.rar
http://rapidshare.com/files/292272556/CNCPCCSACSANR65.part6.rar
http://rapidshare.com/files/292272588/CNCPCCSACSANR65.part7.rar
http://rapidshare.com/files/292272462/CNCPCCSACSANR65.part8.rar

CBT Nuggets CCIE Combo Pack

noreply@blogger.com (Shahbah) — Tue, 08 Dec 2009 23:37:33 PST

The CCIE certification is one of the highest paid and most respected IT certifications available but also one of the most difficult to obtain. Many people have questions and concerns when it comes to obtaining the CCIE and that's what this training is all about.
Jeremy Cioara has done a tremendous job breaking down all the information you need to not only study and prepare for the hands-on lab exam, but he presents it so that you learn how to model and configure advanced LAN/WAN topologies and scenarios. He shows you how to put together a practice lab to duplicate nearly any network set-up and provides an array of cost and time saving tips and tricks that will literally repay your investment in this training many times over.

Even if you do not plan on obtaining certification, you'll learn about the Catalyst 3550 router, Frame-Relay, ISDN, OSPF, ISIS, NAT, VoIP, QOS and BGP.

While a CCNP certification is not a pre-requisite to earn your CCIE certification, you do need to know routing and switching thoroughly. In addition to having a CCNA, we recommend that you have the knowledge and skills of a CCNP prior to viewing the CCIE videos.

The training contains 36 videos providing more than 24 hours of instruction.

Contents: Cisco CCIE Certification Package

- CCIE Series Intro: So you want to be a CCIE
- Advanced LAN Configuration (Part 1): Cat 3550, VLANs, VTP, and EtherChannel
- Advanced LAN Configuration (Part 2): Cat 3550, Spanning Tree Protocol
- Advanced LAN Configuration (Part 3): Cat 3550, Advanced Features
- Advanced WAN Configuration (Part 1): HDLC & PPP
- Advanced WAN Configuration (Part 2): Frame Relay
- Advanced WAN Configuration (Part 3): Frame Relay Traffic Shaping and ATM
- Advanced WAN Configuration (Part 4): ISDN
- Internal Routing Protocols (Part 1): Distance Vector Challenges and RIPv2
- Internal Routing Protocols (Part 2): Advanced EIGRP Configuration
- Internal Routing Protocols (Part 3): OSPF, Key Concepts
- Internal Routing Protocols (Part 4): Foundation OSPF Configuration
- Internal Routing Protocols (Part 5): Advanced OSPF Configuration: NBMA Networks
- Internal Routing Protocols (Part 6): Advanced OSPF Configuration: Practical Example
- Internal Routing Protocols (Part 7): Understanding and Configuring the IS-IS Protocol
- Advanced Router Technology (Part 1): Routing the Unroutable: Router Bridging Technology
- Advanced Router Technology (Part 2): Data Link Switching Plus (DLSW+)
- Advanced Router Technology (Part 3): Voice over IP (VoIP)
- Advanced Router Technology (Part 4): Network Address Translation (NAT)
- Advanced Router Technology (Part 5): HSRP and NTP
- Advanced Router Technology (Part 6): Understanding IP Access-Lists
- Advanced Router Technology (Part 7): Multicast Routing Concepts
- Advanced Router Technology (Part 8): Configuring Multicast Routing
- Quality of Service (Part 1): QoS Fundamentals and the MQC
- Quality of Service (Part 2): Congestion Management and Avoidance
- Quality of Service (Part 3): Policing, Shaping, and Link Efficiency
- BGP (Part 1): BGP Theory
- BGP (Part 2): Understanding BGP Attributes
- BGP (Part 3): Foundation BGP Configuration
- BGP (Part 4): BGP Route Reflectors, Confederations, and Peer-Groups
- BGP (Part 5): BGP Route Aggregation and Filtering
- BGP (Part 6): Configuring BGP Attributes to Influence Routing, Part 1
- BGP (Part 7): Configuring BGP Attributes to Influence Routing, Part 2
- BGP (Part 8): BGP Multihoming, Route Dampening, and Optimization
- Practice Lab
- IPv6

CBT Nuggets CCIE Combo Pack

Download links:

http://uploading.com/files/APK01W8X/CBTCCCP.part01.rar.html
http://uploading.com/files/YQWJDO0W/CBTCCCP.part02.rar.html
http://uploading.com/files/BSWRJMSH/CBTCCCP.part03.rar.html
http://uploading.com/files/KO7OASBQ/CBTCCCP.part04.rar.html
http://uploading.com/files/4KPKXYXF/CBTCCCP.part05.rar.html
http://uploading.com/files/75XV3Z4X/CBTCCCP.part06.rar.html
http://uploading.com/files/TQFA12PL/CBTCCCP.part07.rar.html
http://uploading.com/files/QXUIMUKH/CBTCCCP.part08.rar.html
http://uploading.com/files/CZTDFCPG/CBTCCCP.part09.rar.html
http://uploading.com/files/69TLCHEJ/CBTCCCP.part10.rar.html
http://uploading.com/files/U2WFL6TZ/CBTCCCP.part11.rar.html

CBT NUGGETS-LINUX LPI SERIES-LPIC-I

noreply@blogger.com (Shahbah) — Sat, 03 Oct 2009 01:58:38 PDT

The Linux Operating System continues to grow in popularity and acceptance world-wide and the Linux Professional Institute (LPI) has designed a certification program to certify the competency of system administration using the Linux operating system and its associated tools.

This training maps to the LPIC-1 exams 101 and 102 and teaches you how to work at the Linux command line, perform simple maintenance, support users, and carry out backup, restore, shutdown and reboot commands. You'll also gain the skills to install and configure a workstation and connect it to a LAN, or a stand-alone PC via modem to the Internet.

Instructor Perry Fizzano covers all the topics in a series of easy to comprehend videos that are great for the beginner and expert alike. He even shares his own Linux experiences along the way to give you a better understanding of what using Linux is all about.

There are 19 videos providing more than 9 hours of instruction. A basic understanding of computers and networking is suggested prior to viewing this training.

LPI Series: LPIC-1 Contents:

1)LPIC-1 Series Intro

2)Using the Command Line

3)More Command Line Skills

4)Command Line Skills Part 3

5) Processes

6)Configuration

7)Installation Issues

8) File Systems

9) Package Management

10) X windows

11) Kernel Modules

12) Printing

13) Administrative Tasks 1

14) Administrative Tasks 2

15) Shell Scripting

16) Basic Networking

17) Network Services 1

18) Network Services 2

19) Basic Security

Download Link

http://rapidshare.com/files/271207498/CBT_Nuggets_-_Linux_LPIC-1.part1.rar
http://rapidshare.com/files/271228474/CBT_Nuggets_-_Linux_LPIC-1.part2.rar
http://rapidshare.com/files/271238347/CBT_Nuggets_-_Linux_LPIC-1.part3.rar

CISCO CCDA-Exam Pack 640-863-CBT NUGGETS

noreply@blogger.com (Shahbah) — Fri, 02 Oct 2009 23:56:03 PDT

This CCDA training is cutting edge and focuses on the newest Cisco PDIOO (Plan, Design, Implement, Operate, Optimize) analysis and methodology as well as teaching Cisco Enterprise Composite Network Modeling as the next generation beyond the Cisco 3-layer Design (Access/Distribution/Core). You'll learn modular analysis and modeling along with the newest multilayer switching technology, routing essentials, IP telephony, IP addressing with NAT and IPv6, Management and more.

Instructor Michael Shannon has broken the topics down into easy to understand segments filled with information that you can readily put to use on the job. If you are already certified as a CCNA, this training will give you a lot of background and theory on network design to make you a more knowledgeable and effective IT professional.

Exam 640-863 DESGN is the only exam required to earn the Cisco Certified Design Associate certification. A basic understanding of Cisco networking such as a CCNA certification or equivalent knowledge is recommended before viewing these videos. The training contains 16 videos providing more than 11 hours of instruction.

CD-ROM Contents: Cisco CCDA-DESGN Training

1) Network Design Principles (Part 1): Policies, Procedures, and the PDIOO Method
2) Network Design Principles (Part 2): Recognizing Customer Needs
3) Network Design Principles (Part 3): 8-Step Design Methodology
4) Modular Network Solutions (Part 1): The Cisco Enterprise Network Model
5) Modular Network Solutions (Part 2): Modular Network Solutions and Intelligent Services
6) Basic Switching Design Methods (Part 1): Layer 1 through Layer 3 Technologies
7) Basic Switching Design Methods (Part 2): Enterprise Campus Switching Design Methods
8) Choosing Your Routing Protocol (Part 1): RIPv2, IGRP, and EIGRP Comparisons
9) Choosing Your Routing Protocol (Part 2): OSPF, IS-IS, and BGP4 Comparisons
10) Basic WAN Design (Part 1): Enterprise Edge WAN Design, Planning and Technologies
11) Basic WAN Design (Part 2): WAN, VPN, and Internet Backup Solutions
12) IP Address Design Techniques
13) Designing Voice Networks
14) Assessing Network Security
15) Designing Network Management
16) Introduction to the CCDA Update Series
17) Network Design Methodology
18) Wireless LAN Design
19) IPv6
20) Security Management
21) IP Telephony Design

Download Link:

http://rapidshare.com/files/265519600/cbt-640-863.part01.rar

http://rapidshare.com/files/265519571/cbt-640-863.part02.rar

http://rapidshare.com/files/265519613/cbt-640-863.part03.rar

http://rapidshare.com/files/265519547/cbt-640-863.part04.rar

http://rapidshare.com/files/265519589/cbt-640-863.part05.rar

http://rapidshare.com/files/265519619/cbt-640-863.part06.rar

http://rapidshare.com/files/265519552/cbt-640-863.part07.rar

http://rapidshare.com/files/265519502/cbt-640-863.part08.rar

Cisco CCVP - 642-436-CBT NUGGETS

noreply@blogger.com (Shahbah) — Tue, 29 Sep 2009 07:12:25 PDT

This training provides the core knowledge of Voice over IP (VoIP) required for implementing and supporting data and voice integration solutions at the network level. It helps you grasp the VoIP vision, and to answer three major questions most companies have about VoIP solutions:

Why are so many companies moving to VoIP?
What are the benefits of using VoIP?
Is VoIP right for our company?

After helping you answer these questions, the CVOICE videos get into the nitty-gritty of VoIP implementation. They show you how to:

assign rules to nearly everything using Transformation Rules
move an existing PBX or Key System based network to the newer VoIP technology without getting rid of all your old equipment, so you can maximize the cost efficiency of your VoIP implementation
deploy a worldwide VoIP infrastructure, even using lower-end equipment.
configure your Cisco router to continually monitor the WAN line quality and dynamically change connections as necessary.
set up the Dial Plan that's best for your organization
understand and configure Gatekeeper
use VoIP to handle fax and modem

"CVOICE [Exam-Pack: 642-436 from CBT Nuggets] not only prepares you for the Cisco exam, but also has multiple practical VoIP deployment videos showing exactly how an administrator would set this up in the real world," explained instructor Jeremy Cioara.

The videos cover all objectives for the Cisco CVOICE exam 642-436, which is required for CCVP certification. A thorough understanding of Cisco networking such as CCNA or equivalent knowledge is recommended before viewing these videos. The training contains 33 videos providing more than 16 hours of instruction.

Contents: Cisco CCVP Series - Exam-Pack: 642-436 CVOICE

1)The World Today: Traditional Telephony

2)The World Tomorrow: Packetized Telephone

3)How Spoken Voice Becomes a Packet

4)Planning: Calculating Bandwidth for VoIP Calls

5)Homes and Small Office Connections: Understanding Analog Interfaces

6)Homes and Small Office Connections: Configuring Analog Interfaces

7)Medium to Large Office Connections: Understanding Digital Interfaces

8)Medium to Large Office Connections: Configuring Digital Interfaces

9)Specialty Connections: Handling Fax / Modem Over VoIP

10)Specialty Connections: CAMA/DID Trunks

11)Buying the Right Stuff: What Router, What Interfaces?

12)Resources: Understanding and Using DSP Resources

13)Design: IP Telephony Deployment Models

14)Dial-Peers: The Rest of the Story, Part 1

15)Dial-Peers: The Rest of the Story, Part 2

16)Dial-Peers: The Rest of the Story, Part 3

17)Advanced Dial Plans: Digit manipulation and transformations, Part 1

18)Advanced Dial Plans: Digit manipulation and transformations, Part 2

19)Advanced Dial Plans: Calling Privileges

20)Advanced Dial Plans: Best Practices

21)H.323 Gatekeepers: Key Terms and Concepts

22)H.323 Gatekeepers: Base Configuration

23)H.323 Gatekeepers: Call Admission Control

24)Voice Protocols: H.323 Concepts and Configuration

25)Voice Protocols: SIP Concepts and Configuration

26)Voice Protocols: MGCP Concepts and Configuration

27)Quality of Service: The Missing Piece

28)Quality of Service: The Missing Piece, Part 2

29)The Good Busy Signal: Call Admission Control

30)External VoIP Connections: Cisco Unified Border Element (UBE)

31)Wrap-Up: The Complete Network Design

32)Certification Preparation (two CCVP tracks)

Download Here

Cisco CCNA 640-802-CBT Nuggets

noreply@blogger.com (Shahbah) — Tue, 15 Sep 2009 03:57:38 PDT

Cisco CCNA Certification Package contains these Exam-Packs:

Exam-Pack 640-822: ICND1

Welcome to the world of Cisco networking, and to Cisco’s newest entry-level certification. The ICND1 Exam-Pack gives you the foundational knowledge you need to set up and manage small- to mid-sized Cisco networks, plus prepares you for CCENT Certification.

Exam-Pack 640-816: ICND2

The ICND2 Exam-Pack teaches you how to manage mid- to large-sized Cisco networks. Plus once you’ve passed the ICND1 and ICND2 exams, you will have earned Cisco’s

Download Link:

http://rapidshare.com/files/135991883/CBT.Nuggets.CCNA.part01.rar
http://rapidshare.com/files/135997773/CBT.Nuggets.CCNA.part02.rar
http://rapidshare.com/files/136002753/CBT.Nuggets.CCNA.part03.rar
http://rapidshare.com/files/136011073/CBT.Nuggets.CCNA.part04.rar
http://rapidshare.com/files/136015567/CBT.Nuggets.CCNA.part05.rar
http://rapidshare.com/files/136007131/CBT.Nuggets.CCNA.part06.rar
http://rapidshare.com/files/136000772/CBT.Nuggets.CCNA.part07.rar

Remote Shell (rsh) configuration on Cisco Router

noreply@blogger.com (Shahbah) — Tue, 15 Sep 2009 03:12:47 PDT

Run remote commands on a Cisco router from your PC

Can you go to a Windows command prompt and run a command on your router? Usually, you would have to Telnet or SSH to the router first to run the command, right?
While this approach works, you can also run router commands without leaving the Windows command prompt, which can come in handy for scripting and automating router management. Let’s take a closer look.

What is remote shell (rsh)?

Remote shell (rsh) is a command-line program commonly found in UNIX and Linux systems. Using rsh, you can remotely execute command-line programs on a remote system. This could be another UNIX or Linux system, or it could be a Cisco router or switch. Rsh was part of the BSB UNIX operating system and included with rcp (remote copy) and rlogin (remote login).
While most Linux administrators are already familiar with rsh, some Windows administrators might not be. In fact, Windows XP and Windows Server 2003 both include rsh.

Figure A shows a screenshot of using rsh at the command prompt.

What is remote shell (rsh)?

However, when working with rsh, it’s important to remember that rsh is insecure — it does not encrypt the communications between the remote device and the system. You should always configure rsh as securely as possible on the router by locking down the IP address of the management machine and the username.
However, even when taking such precautions, rsh is still very insecure compared to SSH. It’s a good idea to use rsh only on a protected, secured, internal network. (By the way, if you’re allowing rsh through a firewall, it uses TCP port 514.)

How do I configure rsh on my router?

To be able to run a command on a Windows PC, have it go to the router, execute the command, and then return the output to you, all you need to do is enter two commands. Let’s walk through the process.
First, you need to enable the remote shell services on the router. The Cisco IOS calls the remote shell service ip rcmd. To enable this service, enter the following command when in Global Configuration Mode:

Router(config)# ip rcmd rsh-enable

Second, you need to configure the permissions for your workstation and your user to be able to perform these remote shell commands. Here’s an example of this command:

Router(config)# ip rcmd remote-host root 192.168.1.45 ddavis enable

Let’s take a closer look at this command. The ip rcmd remote-host part is required. Next, you enter the local username on this router of the user that the remote shell will log in under when it runs commands. In this case, we used the local user root.
Next, 192.168.1.45 is the IP address of the management workstation that we want to allow to execute these remote shell commands — in other words, the IP address of the PC. Next, you see my local Windows username: ddavis. In this case, that’s the name of the user logged into the Windows XP machine as well as the user who will be executing the rsh command in Windows. If I were running a batch job script that executed the Windows rsh command, I would need to enter the Windows username of the user that the batch job was running under.

Finally, the command contains the enable keyword. This allows the remote shell user access to enable the mode on the router. I could take this a step further and specify the level of access allowed (i.e., levels 1 through 15).
Keep in mind that these two commands assume you already have the router configured and you already have a local user called root. If you don’t have a root user, you can use the following command to do so:

Router(config)# username root privilege 15 password Cisco

How do I use rsh from my Windows workstation?

Once you’ve configured the above commands, you can easily run a remote shell command from the Windows command prompt. Figure B offers an example.

Figure B

Here’s the actual command I used:

Z: rsh Router1 -l root sh ver

Here’s how the command works:
•The hostname is the first thing specified (in this case, Router1).
•Next, I used -l (i.e., the letter L) to specify the remote username that I will use to log in. (Keep in mind that I still have to be user ddavis on the local Windows PC for the security to work. Also, I have to come from the IP address that I’ve specified — in other words, this wouldn’t work from another workstation.)
•Finally, specify the command. In this case, I ran the show version command (or sh ver).

What can I do with the rsh command?
In addition to using the show version command, you can also run the show running-configuration (sh run) command or any other privileged level command. Here are some more examples:

•show ip interface brief
•show ip route
•show ip ospf neighbors
•show ip bgp summary
•show log

What you can’t do is run a Global Configuration Mode command, such as enabling an interface or configuring an IP address. This usually limits you to the show commands.
However, one very useful thing you could do is copy your current configuration to a TFTP server and do it inside a script initiated on the Windows server. For example, you would use the copy running-configuration tftp:/1.1.1.1 command.

What else can I do with remote commands?

If you check out the Cisco IOS documentation that covers remote commands, you’ll find that there are a number of options you can use with the remote shell commands. One of the latest features in the Cisco IOS is that you can authenticate incoming rsh and rcp commands using a Cisco IOS access control list.
One of the more interesting variations is that you can use remote copy (rcp). So, I could copy a file using the Windows rcp command from my PC to the router or from the router to the PC — without ever using TFTP or FTP. (You can enable rcp with the ip rcmd rcp-enable command).

Java SCJP -CBT nuggets Exam-Pack:CX-310-035

noreply@blogger.com (Shahbah) — Tue, 15 Sep 2009 03:14:04 PDT

Java is so cool. Imagine being able to compile one piece of code and have it run on nearly any operating system, from Windows and Macintosh to Linux, Unix and the Internet. It's widely used and universally accepted as the preferred programming language of the Internet, but it is also a great development platform for business applications, video games and to even create software for mobile devices.
This course will teach you beginning through advanced Java programming skills while preparing you for Sun exam CX-310-035. Instructor Robert Barr introduces you to the Java language fundamentals and, by the end of the training, has you building GUI and web-based applications that can link to databases. Robert calls on his nearly ten years of Java programming experience to pass along helpful tips, tricks and real-world examples.
A basic understanding of computers and programming is recommended before viewing these videos. The training contains 29 videos providing more than 15 hours of instruction.

Contents: Java SCJP - Exam-Pack: CX-310-035

1.Introduction to Java
2.Java Language Fundamentals
3.Java Language Fundamentals Part 2
4.Java Language Flow Control Part 1
5.Java Language Flow Control Part 2
6.Integrated Development Environments (IDEs)
7.Using Arrays
8.Strings
9.OOP Part 1
10.OOP Part 2
11.Working with Math and Dates
12.Introduction to Swing
13.Interfaces and Abstract Classes
14.Exception Handling
15.Thread
16.Inner Classes
17.Event Handling
18.More Swing
19.Java I/O
20.Introduction to JDBC
21.Developing Applets
22.Implementing Tomcat for Servlet/JSP Dev
23.Implementing Tomcat for Servlet/JSP Dev Part 2
24.Introduction to Servlets
25.Servlets Part 2: Database-Connected Servlets
26.Introduction to JSP
27.Implementing JSP Scriptlets
28.Packages
29.Documenting Your Classes

Download Links:

http://rapidshare.com/files/146951520/CBT_Nuggets___Java_-_SCJP.part01.rar
http://rapidshare.com/files/146955419/CBT_Nuggets___Java_-_SCJP.part02.rar
http://rapidshare.com/files/146963051/CBT_Nuggets___Java_-_SCJP.part04.rar
http://rapidshare.com/files/146966779/CBT_Nuggets___Java_-_SCJP.part05.rar
http://rapidshare.com/files/146970588/CBT_Nuggets___Java_-_SCJP.part06.rar
http://rapidshare.com/files/146974359/CBT_Nuggets___Java_-_SCJP.part07.rar
http://rapidshare.com/files/146977991/CBT_Nuggets___Java_-_SCJP.part08.rar
http://rapidshare.com/files/146981802/CBT_Nuggets___Java_-_SCJP.part09.rar
http://rapidshare.com/files/146985217/CBT_Nuggets___Java_-_SCJP.part10.rar
http://rapidshare.com/files/146988575/CBT_Nuggets___Java_-_SCJP.part11.rar
http://rapidshare.com/files/146989689/CBT_Nuggets___Java_-_SCJP.part12.rar

Windows Web Server-CBT Nuggets Video

noreply@blogger.com (Shahbah) — Mon, 14 Sep 2009 14:01:00 PDT

The Web server is the basis of everything that happens with your Web page, and yet often people know nothing about it. This CBT describes you how to build a Windows Web Server using Apache 2 and MySQL. Apache is one of the most popular Web servers on the Web right now, and part of its charm is that it's free. It also has a lot of features that make it very extensible and useful for many different types of Web sites. It is a server that is used for personal web pages up to enterprise level sites.We will also be discussing on how to use PHP in your web server to good effect.

Apache is possibly the world's most popular Web server. It is the most widely used and because it is released as "open source" and with no fee for use, it has had a lot of modifications and modules made for it. You can download the source code, and compile it for your machine, or you can download binary versions for many operating systems (like Windows, Solaris, Linux, OS/2, freebsd, and many more). There are many different add-ons for Apache, as well. The drawback to Apache is that there might not be as much immediate support for it as other commercial servers

DOWNLOAD HERE

ITIL V3 Management -CBT Nuggets Videos

noreply@blogger.com (Shahbah) — Mon, 14 Sep 2009 13:41:49 PDT

The IT Infrastructure Library Foundation series gives you hands on skills for doing IT service management and using the IT Infrastructure Library set of best practices. These skills are required to move into IT management in many organizations. In addition to giving you these real-world skills, the IT Infrastructure Library Foundation series maps to exam objectives for the EXIN ITIL Foundation exam for ITIL Foundation certification, which proves to current and prospective employers that you have these valuable skills.With these skills you can optimize your organization's IT processes and ensure service and resource ability providing your organization cost savings and other benefits that make you worth more to the organization.

The IT Infrastructure Library Foundation series contains:-
1.Introduction to ITIL
2.IT Infrastructure Library
3.IT Service Management Concepts
4.Service Desk Support
5.Incident Management
6.Problem Management
7.Change Management
8.Release Management
9.Configuration Management
10.SLA Management
11.IT Services Financial Management
12.Capacity Management
13.Availability Management
14.IT Service Continuity Management
15.IT Security Management

DONWLOAD HERE PART-1,PART-2

Windows 2003 MCSE Simulator

noreply@blogger.com (Shahbah) — Mon, 28 Sep 2009 13:17:02 PDT

The Windows Server 2003 Simulator gives you the most realistic and sophisticated Windows Server 2003 simulation tool on the market today.

MCSE Lab Simulation Software offers rich, full-scale open Microsoft Windows Server 2003 simulations that allow users to view and practice network configuration and troubleshooting, and develop the necessary skills for the scenario-based MCSE exams, even if they don't have access to a network or software.

Open simulations for Microsoft Windows are critical to the training process. They replicate a real network system and let students execute the same job they can perform on the real system.

Open simulations allows MCSE students discover various answers for completing a task, and view the outcome of specific actions. Students learn through trial and error instead of being taught through specific instructions.
In addition, feedback at the end of each simulation task notifies the user to what was completed successfully and what was not.

Windows Server 2003 video demonstrations are designed to show students how to execute certain tasks using clearly defined steps. These videos are powerful instructional tools when combined with MCSE open simulation exercises.
These Windows Server scenarios require you to think through a difficult computing or administration problem. They are designed to help Microsoft MCSE students improve their troubleshooting skills.

DOWNLOAD HERE

Cisco PIX Remote Access VPN Configuration

noreply@blogger.com (Shahbah) — Mon, 14 Sep 2009 13:03:25 PDT

Cisco PIX (Private Internet eXchange) is a popular IP firewall and network address translation (NAT) appliance. It was one of the first products in this market segment.
In 2005, Cisco introduced the newer Adaptive Security Appliance (ASA), that inherited much of PIX features, and in 2008 announced PIX end-of-sale.

The PIX technology is still sold in a blade, the FireWall Services Module (FWSM), for the Cisco Catalyst 6500 switch series and the 7600 Router series.

The PIX was the first commercially available firewall product to introduce protocol specific filtering with the introduction of the "fixup" command. The PIX "fixup" capability allows the Firewall to apply additional security policies to connections identified as using specific protocols. Two protocols for which specific fixup behaviors were developed are DNS and SMTP. The DNS fixup originally implemented a very simple but effective security policy; it allowed just one DNS response from a DNS server on the Internet (known as outside interface) for each DNS request from a client on the protected (known as inside) interface. "Fixup" has been superseded by "Inspect" on later versions of PIX OS.

Download here

What is a WWAN ?

noreply@blogger.com (Shahbah) — Mon, 14 Sep 2009 12:46:10 PDT

A Wireless Wide Area Network or WWAN is wireless connectivity to the Internet achieved through using cellular tower technology. Cellular services like AT&T™, Verizon™ and Sprint™ offer WWAN for a monthly fee, or alternately on a pay-as-you-need-it basis. WWAN connectivity allows a user with a laptop and a WWAN card to surf the Internet, check email, or connect to a Virtual Private Network (VPN) from anywhere within the regional boundaries of cellular service

As people become more dependent on online technology to conduct business and keep information flowing, wireless connectivity has become a virtual necessity. Many hotels and communities offer local connectivity, but coverage is often spotty or nonexistent. WWAN can all but guarantee connectivity when you need it.
To take advantage of WWAN, a user must first purchase a WWAN PC card for his or her laptop unless WWAN connectivity is built-in. By purchasing the card and paying a monthly fee, one need only slip the card into the PC-card slot (formerly known as the PCMCIA slot) to access the WWAN. Plans vary among providers but most are rated according to data download caps, with unlimited plans running about $80 US Dollars (USD) per month. Data transfers of 5 Megabytes per month can start as low as $20 USD.
In some cases a person may not require 24/7 access to a WWAN, but would like to use it occasionally when free local networks are not available. In this case some WWAN providers will charge by the day for connectivity. By using the WWAN card, the user commits to a small charge, securing a 24-hour pass. At the end of the 24-hour period access to the WWAN is denied unless the user purchases another pass.
As an alternate to a WWAN card, it is possible to connect some cellular phones directly to a laptop using a Universal Serial Bus (USB) cable. The cell phone acts as a modem to patch the laptop into the Internet. This is only possible with certain cellphone models and plans, and the data transfer speed will be slower than connecting with a WWAN card. Before using this method, check with your cellular provider to see what charges (minutes) might apply, if any.

While there are certainly less expensive ways to get wireless connectivity in many cases, none cover the territory offered by WWAN for those visiting, living or working in remote or “nonwired” areas. WWAN is commonly available in regions where services like Digital Subscriber Line (DSL) and cable might not be. It can also be an international solution for global travelers, offering one more option for staying connected.

CBT VMware Esx 3.0 Server Training Videos

noreply@blogger.com (Shahbah) — Sat, 28 Mar 2009 23:19:07 PDT

VMware is one of the fastest growing companies today and its virtualization software is the hottest technology in the computer world today, so if you are trying to advance your career and need the next hot thing, ESX Server is that technology that will give you the edge you need to get ahead. For those of you that are seeking certification, you are still required to attend the VMware class as that is a mandatory step in achieving your certification. You can use our CBT to reinforce what you learned.

If you are trying to learn VMware ESX Server 3.0 because of a job requirement, this CBT gives you practical, hands on training from someone who does it on a day to day basis and has implemented some large ESX deployments.

The CBT contains 10 videos as follows:

Lesson 1: Introduction to Virtualization & ESX Server 3.0
Lesson 2: Installing & Configuring ESX Server 3.0
Lesson 3: Virtual Networking Concepts
Lesson 4: Storage Concepts
Lesson 5: Installation & Administration with Virtual Center
Lesson 6: VM Creation, Gold Builds and Clones
Lesson 7: Resource Management
Lesson 8: VM Access Control
Lesson 9: Disaster Recovery & Backup
Lesson 10: Monitoring

Download Links:

http://rapidshare.com/files/213156988/Trainsignal.VMware.ESX.Server.Training.Package.part1.rar

http://rapidshare.com/files/213169911/Trainsignal.VMware.ESX.Server.Training.Package.part2.rar

http://rapidshare.com/files/213181188/Trainsignal.VMware.ESX.Server.Training.Package.part3.rar

http://rapidshare.com/files/213192171/Trainsignal.VMware.ESX.Server.Training.Package.part4.rar

http://rapidshare.com/files/213193026/Trainsignal.VMware.ESX.Server.Training.Package.part5.rar

Password for opening RAR File:

BlackVinta

Or

Download Torrent file Here

Increase Broadband Internet Speed tips

noreply@blogger.com (Shahbah) — Sat, 28 Mar 2009 08:07:24 PDT

To increase performance of Broadband Internet speeds.

Just copy the following code in Notepad and save the file with any name but the extension of the file must be .REG, and after that run the file:

Windows Registry Editor Version 5.00

Code:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"NegativeCacheTime"=dword:00000000
"NetFailureCacheTime"=dword:00000000
"NegativeSOACacheTime"=dword:00000000
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
"MaxConnectionsPerServer"=dword:00000040
"MaxConnectionsPer1_0Server"=dword:00000040

[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
"MaxConnectionsPer1_0Server"=dword:0000000a
"MaxConnectionsPerServer"=dword:0000000a

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProvider]
"DnsPriority"=dword:00000007
"HostsPriority"=dword:00000006
"LocalPriority"=dword:00000005
"NetbtPriority"=dword:00000008

[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched]
"NonBestEffortLimit"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanworkstation\parameters]
"MaxCmds"=dword:00000064
"MaxThreads"=dword:00000064
"MaxCollectionCount"=dword:00000064

Note: Please take a back-up of registry before attempting any registry changes so that you can revert back.

CCNP Cisco Networking Academy Version 5

noreply@blogger.com (Shahbah) — Sat, 28 Mar 2009 08:27:38 PDT

CCNP Cisco Networking Academy version 5
Cisco Networking Academy Program
File Size:120 MB

The new curriculum will give students access to the knowledge and skills necessary to implement and support an end-to-end IP network infrastructure with integrated advanced technology solutions including security, wireless LANs, quality of service (QoS), and VoIP. The purpose of this update is to provide a summary of the changes and information regarding the equipment requirements for teaching the new courses, instructor training, and certification.

Download Link:

http://www.megaupload.com/?d=KIQJUU7B
http://www.megaupload.com/?d=3074GCSL
http://www.megaupload.com/?d=B00IPFR1
http://www.megaupload.com/?d=7M4BG74P
http://www.megaupload.com/?d=YXFZSEY8
http://www.megaupload.com/?d=KFCTYHBH

Password:
john_vinasofts_ws

How to Disable Error Reporting in Windows

noreply@blogger.com (Shahbah) — Sat, 28 Mar 2009 07:00:23 PDT

To disable Error reporting in Windows XP

1)Click Start, and then click Run.
2)Type msconfig to open the System Configuration Utility.
3)Click the Services tab.
4)Clear the Error Reporting Service check box, and then click OK.
5)Reboot your system.

Restore Active Directory in Windows Server

noreply@blogger.com (Shahbah) — Mon, 23 Mar 2009 08:13:25 PDT

Restore Active Directory

You can't restore Active Directory (AD) to a domain controller (DC) while the Directory Service (DS) is running. To restore AD, perform the following steps.

Reboot the computer.
At the boot menu, select Windows 2003 Server. Don't press Enter. Instead, press F8 for advanced options. You'll see the following text. OS Loader V5.0 Windows 2003 Advanced Options Menu Please select an option: Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Enable Boot Logging Enable VGA Mode Last Known Good Configuration Directory Services Restore Mode (Windows NT domain controllers only) Debugging Mode Use | and | to move the highlight to your choice. Press Enter to choose.
Scroll down, and select Directory Services Restore Mode (Windows NT domain controllers only).
Press Enter.
When you return to the Windows 2003 Server boot menu, press Enter. At the bottom of the screen, you'll see in red text Directory Services Restore Mode (Windows NT domain controllers only).

The computer will boot into a special safe mode and won't start the DS. Be aware that during this time the machine won't act as a DC and won't perform functions such as authentication.

Start NT Backup.
Select the Restore tab.
Select the backup media, and select System State.
Click Start Restore.
Click OK in the confirmation dialog box.

After you restore the backup, reboot the computer and start in normal mode to use the restored information.

SAP IDES ECC 6.0 Installation Procedure Video Training

noreply@blogger.com (Shahbah) — Sat, 21 Mar 2009 23:12:05 PDT

Installation Procedure Video for SAP IDES ECC 6.0

Download Here

How to calculate Subnet Mask & VLSM

noreply@blogger.com (Shahbah) — Sat, 21 Mar 2009 08:45:03 PDT

Method to calculate subnet mask

For 128, Binary is 10000000, we categories this binary as,
NetID: 1 (1’s One)
HostID: 7 (7’s Zero)

Number of PCs:
Formula:
2^ Host ID -2= PC
2^7-2=126 PC

Number of Network:
Formula:
2^Net ID=Network
2^1=2

Boson NetSim for CCNP 7.0 Download

noreply@blogger.com (Shahbah) — Sat, 21 Mar 2009 07:50:11 PDT

Boson NetSim for CCNP 7.0

Features included in the Boson NetSim for CCNP

1)IPv6 addressing
2)OSPFv3 using IPv6 addresses
3)Multicasting configuration
4)New command parser
5)Improved command speed
6)Lab compiler application to create your own lab packages
7)New structure for the Lab Navigator
8)New implementation of OSPF, now with Multi-Area
9)Summarization for RIPv2 and EIGRP
10)New implementation of the routing table

Download Here

GNS3 Video Tutorial

noreply@blogger.com (Shahbah) — Sun, 15 Mar 2009 06:39:54 PDT

What is GNS3 ?

GNS3 is a graphical network simulator that allows simulation of complex networks.

To allow complete simulations, GNS3 is strongly linked with :
1)Dynamips, the core program that allows Cisco IOS emulation.
2)Dynagen, a text-based front-end for Dynamips.
3)Pemu, a Cisco PIX firewall emulator based on Qemu.

GNS3 is an excellent complementary tool to real labs for Cisco network engineers, administrators and people wanting to pass certifications such as CCNA, CCNP, CCIP or CCIE.

It can also be used to experiment features of Cisco IOS or to check configurations that need to be deployed later on real routers.

This project is an open source, free program that may be used on multiple operating systems, including Windows, Linux, and MacOS X.

Features overview

1)Design of high quality and complex network topologies.
2)Emulation of many Cisco router platforms and PIX firewalls.
3)Simulation of simple Ethernet, ATM and Frame Relay switches.
4)Connection of the simulated network to the real world!
5)Packet capture using Wireshark.

Download Link Rapidshare:

Download Part 1
Download Part 2
Download Part 3
Download Part 4
Download Part 5
Download Part 6
Download Part 7
Download Part 8
Download Part 9
Download Part 10
Download Part 11
Download Part 12
Download Part 13
Download Part 14