stop berdoa panjang umur

marikita

abis ngerusak minta dilupain, dimaafin

dianjinganjingin gabole

dikata2in gabole

yg kena disuruh sabar, malah stress+jantung+gerd lengkap dah

yg brengseknya sehat enak2an tidur nyenyak jalan2 makan enak

ANJING

laksanakan kewajiban, maka hak pihak lain akan terlunaskan

tapi …ah, sing barisa mawana, aloh maha uninga

tapida meureun gara2 sayage loba hutang apa nganyenyeri batur

hampura kanu karasa, lain teu mirasa

berguna untuk developer, untuk tau ip publik, tinggal buka ipnya.com

cahaya matahari yg kita terima “sekarang” adalah cahaya yg dipancarkan matahari 8 menit 20 detik lalu

cahaya dari proxima centauri yg kita terima “sekarang” adalah cahaya yg dipancarkan/dipantulkan proxima centauri 4.3 tahun yg lalu

mungkin di ujung sana, sebenarnya sesuatu sudah terjadi bahkan sudah selesai, misal surga dan neraka, atau bahkan ketidakadaan semesta

kayaknya, yang kita alami sekarang adalah sisa cahaya hasil penciptaan dan pengakhiran semesta

jadi, whuuuffuit (baca sambil monyong)

wh.. adalah proses yg disebut bigbang

uuuffu.. adalah yg kita alami sekarang

it adalah akhir cerita yg sebenernya sudah terjadi

nabi muhammad isra mi’raj dan sudah melihat surga dan neraka yg sudah/sedang terjadi, gimana caranya? sedang kita/nabi muhammad pun saat itu sedang menjalani hidup ini

di isra mi’raj dikabarkan nabi muhammad mengalami itu dalam satu malam, bahkan dari posisi masjidil haram (mekah) ke masjidil aqsa (palestina) lalu ke sidratul muntaha (langit), itu jaraknya jauh banget, paling mungkin dilalui se kecepatan cahaya atau bahkan lebih, mengenai menggunakan apa, kita belum atau bahkan bisa jadi ngga akan pernah tahu

karena jumlah ilmu yg kita dapat dibanding ilmu Allah adalah ibarat satu jari dicelupkan ke lautan, nah sisa air diujung jari itu ilmu yg diijinkan Allah utk manusia ,dan lautan adalah ilmu Allah

karena ketika kita bisa bergerak = atau bahkan > kecepatan cahaya maka kita bisa “menyusul” proses whuuuffuit tadi

hanya ide

Occasionally as a Linux administrator you will be in the situation where working on a remote server and you are left with no option but to force a reboot the system. This may be for a number of reasons, but where I have found it most frequent is when working on Linux clusters in a remote location.

When the “reboot” or “shutdown” commands are executed daemons are gracefully stopped and storage volumes unmounted.
This is usually accomplished via scripts in the /etc/init.d directory which will wait for each daemon to shut down gracefully before proceeding on to the next one. This is where a situation can develop where your Linux server fails to shutdown cleanly leaving you unable to administer the system until it is inspected locally. This is obviously not ideal so the answer is to force a reboot on the system where you can guarantee that the system will power cycle and come back up. The method will not unmount file systems nor sync delayed disk writes, so use this at your own discretion.

To force the kernel to reboot the system we will be making use of the magic SysRq key.

The magic_SysRq_key provides a means to send low level instructions directly to the kernel via the /proc virtual file system.

To enable the use of  the magic SysRq option type the following at the command prompt:

    echo 1 > /proc/sys/kernel/sysrq

Then to reboot the machine simply enter the following:

    echo b > /proc/sysrq-trigger

Voilà! Your system will instantly reboot.

masih ada

baru belajar cross app development pake dotnetcore, bikin console hello world aja hasil publishnya 30mb ckckck… worth lah daripada belajar lagi swift atau obj-c

catatatatan, worth untuk developer tua

kalo devs muda mah real native per platform aja yak, btw utk catatan saya upload stepnya dibawah untuk catatan pribadi juga

besok besok mau coba pake gui ah… hepikoding

howto compille php 5.6 on ubuntu 20

php5.6 is end of life, so, here we go

assume you’re in /home/xxx

[xxx@localhost ~]$ wget -O php-5.6.40.tar.gz https://www.php.net/distributions/php-5.6.40.tar.gz
[xxx@localhost ~]$ tar -zxvf php-5.6.40.tar.gz
[xxx@localhost ~]$ mv php-5.6.40 php
[xxx@localhost ~]$ mkdir -p ./build
[xxx@localhost ~]$ mkdir -p ./src
[xxx@localhost ~]$ cd src
[xxx@localhost src]$ git clone https://github.com/curl/curl.git
[xxx@localhost src]$ git clone https://github.com/openssl/openssl.git

Open ssl 1.0.0

[xxx@localhost src]$ cd openssl
[xxx@localhost openssl]$ git checkout OpenSSL_1_0_0-stable

// Make sure Build is clean before recompiling

[xxx@localhost openssl]$ make clean
[xxx@localhost openssl]$ make dclean

// Configure OpenSSL

[xxx@localhost openssl]$ ./config -fPIC shared –prefix=/home/xxx/build

// Make OpenSSL & Install into Build Directory

[xxx@localhost openssl]$ make -j$(nproc)
[xxx@localhost openssl]$ make install

[xxx@localhost openssl]$ cd ~/build/bin
[xxx@localhost bin]$ ./openssl version
OpenSSL 1.0.0u-dev xx XXX xxxx
[xxx@localhost bin]$

Curl with openssl support

[xxx@localhost bin]$ cd ~/src/curl

// Run buildconf to create the autoconf file (may require sudo access)

[xxx@localhost curl]$ ./buildconf

// Configure cURL to point to OpenSSL 1.0.0 libraries, and install to Build directory

[xxx@localhost curl]$ env PKG_CONFIG_PATH=/home/xxx/build/lib/pkgconfig
[xxx@localhost curl]$ ./configure –with-ssl –prefix=/home/xxx/build

// Make & Install cURL to Build directory

[xxx@localhost curl]$ make -j$(nproc)
[xxx@localhost curl]$ make install

[xxx@localhost curl]$ cd ~/build/bin
[xxx@localhost bin]$ ./curl -V
curl 7.24.0 (x86_64-unknown-linux-gnu) libcurl/7.24.0 OpenSSL/1.0.0u zlib/1.2.11
Protocols: dict file ftp ftps gopher http https imap imaps pop3 pop3s rtsp smtp smtps telnet tftp
Features: IPv6 Largefile NTLM NTLM_WB SSL libz

Compile php 5.6

// Generate autoconf files. May require sudo access.
[xxx@localhost bin]$ cd ~/php
[xxx@localhost php]$ ./buildconf

// Configure PHP 5.6 to point to the Build directory containing OpenSSL & cURL

[xxx@localhost php]$ ./configure \
–prefix=/opt/php56 \
–with-config-file-path=/opt/php56/etc \
–with-curl=/home/xxx/build \
–with-openssl-dir=/home/xxx/build \
–with-openssl=shared \
–with-pdo-mysql \
–with-fpm-user=apache \
–with-fpm-group=apache \
–with-libdir=lib64 \ ** Use if on 64 bit OS. Include softlink to lib directory

// Make & Install PHP 5.6

[xxx@localhost php]$ make clean
[xxx@localhost php]$ make -j$(nproc) -B
[xxx@localhost php]$ make install

[xxx@localhost php]$ /opt/php56/bin/php -v
PHP 5.6.40 (built: Aug  8 2021 03:51:44)
Copyright (c) 1997-2016 The PHP Group
Zend Engine v2.6.0, Copyright (c) 1998-2016 Zend Technologies