>man hacker

在Linux下大量改變副檔名

2011-03-29T23:46:00.000-07:00

雖然在linux之下副檔名並沒有什麼意義, 但是有時候為了辨識容易還是會用到.這裡提供一下在bash/C shell下如何大量改變副檔名

Bourne Shell:

for f in *.foo; do
base=`basename $f .foo`
mv $f $base.bar
done

C Shell:

foreach f ( *.foo )
mv $f $f:r.bar
end

如何在cmd之下大量改變檔案之副檔名

2010-10-15T01:02:00.000-07:00

example
rename *.txt *.c

vi 編輯完檔案發現忘記按sudo編輯之解決方法

2010-05-04T20:34:00.000-07:00

:w !sudo tee %

有時候沒有注意編輯檔案的權限, 等到全部編輯完才發現忘記打sudo,

我可不想跳出去再重新編輯一次, 這時候在vi 指令模式下用以上指令即可儲存.

在eeebox b202, FreeBSD 8.0 release 安裝 wireless card driver

2010-05-04T06:41:00.000-07:00

This is the process to setup eeebox's wireless driver on FreeBSD:
The eeebox's wireless chip is rt2860 made by the company - ralink.

method 1(WARNING: this method is NOT success in my trial):
convert windows driver for rt2860 to FreeBSD kernel module.
download windows version driver: rt2860.inf, rt2860.sys
put kernel module generated from ndisgen which is rt2860_sys.ko to /boot/modules
edit /boot/loader.conf add rt2860_sys_load="YES"

result -> fail -> the strange error message keep output to screen
"ndis0 if_input should not be called"

accidently find there are already a driver for rt2860 for FreeBSD 7.0 and 8.0 release
so I abandon method 1 and turn to method 2.

method 2 (SUCCESS): find the kernel module.
Surprisely, someone has write the rt2860/rt2870 driver for FreeBSD.
http://repo.or.cz/w/ralink_drivers/rt2860_fbsd8.git
use git clone links to download whole source code
make
cp rt2860.ko/ rt2860.ko.module to /boot/kernel
set rt2860_load="YES" in /boot/loader.conf
reboot system.

Loading rt2860.ko/rt2870.ko will create the hardware interface rt28600/rt28700 respectively but since version 8 of FreeBSD, these are not controlled directly for the usual settings but with a virtual interface that must created either manually like:

wlans_rt28600="wlan0"
ifconfig_wlan0="WPA DHCP"

network={
ssid="freebsdap" (ssid)
psk="freebsdmall" (password)
}
#/etc/rc.d/netif start # restart the network interface
SUCCEED!!

reference:
"FreeBSD wireless handbook" -
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html

file path summary:
/boot/loader.conf -> setting which module to boot when starting the system.
/boot/defaults/loader.conf -> default modules to boot.
/boot/modules -> put the custom kernel modules .ko to here
/boot/kernels -> put your .ko .ko.symbols to here

快速移動游標 in console

2010-05-04T01:43:00.000-07:00

快速移動游標 in console

ctrl+a -> 移到最前面 (= home)
ctrl+e -> 移到最後面 (= end)

如何刪除幾天以前的舊檔案

2010-04-22T08:01:00.000-07:00

指令如下

find /path/to/files* -mtime +5 -exec rm {} \;

o. /path/to/files* 是你所要刪除檔案的所在資料夾

o. -mitme 後面接的是檔案距離上次修改的時間. 如果打+5代表刪除所有五天以前的檔案

o. 最後的rm就是刪除. 如果要刪除的檔案是資料夾請加 -r.

o. 注意rm, {} , \ 之間有空格.

make your own ls color

2010-03-12T00:31:00.000-08:00

o. add this three line to your ~/.bashrc

alias ls='ls --color'

LS_COLORS='di=1:fi=0:ln=31:pi=5:so=5:bd=5:cd=5:or=31:mi=0:ex=35:*.rpm=90'

export LS_COLORS

o. parameter meaning:

di = directory

fi = file

ln = symbolic link

pi = fifo file

so = socket file

bd = block (buffered) special file

cd = character (unbuffered) special file

or = symbolic link pointing to a non-existent file (orphan)

mi = non-existent file pointed to by a symbolic link (visible when you type ls -l)

ex = file which is executable (ie. has 'x' set in permissions).

o. color number:

0 = default color

1 = bold

4 = underlined

5 = flashing text

7 = reverse field

31 = red

32 = green

33 = orange

34 = blue

35 = purple

36 = cyan

37 = grey

40 = black background

41 = red background

42 = green background

43 = orange background

44 = blue background

45 = purple background

46 = cyan background

47 = grey background

90 = dark grey

91 = light red

92 = light green

93 = yellow

94 = light blue

95 = light purple

96 = turquoise

100 = dark grey background

101 = light red background

102 = light green background

103 = yellow background

104 = light blue background

105 = light purple background

106 = turquoise background

scientific method [FYI]

2010-03-04T03:06:00.000-08:00

In the scientific method, you go through the following steps:

You make observations.
You develop hypotheses to explain these observations.
You suggest experimental ways to test these hypotheses.
You predict the results of the experiments.
You run the experiments.
You compare the results of your experiments to your predictions.
You publish all your results.

腳踏車位置備忘方法

2010-02-27T21:23:00.000-08:00

同學們一定常常遇到一個問題: 騎腳踏車到學校, 停放腳踏車在某個位置, 在一天的課程結束後回家時, 往往忘記自己腳踏車當初停在哪裡, 而感覺自己很笨的在那裡找自己的腳踏車. 之前跟同學討論過這個問題, 很直接就會想說用GPS定位等方法, 但是那些方法成本都太高, 誰也不想放那麼貴的東西在腳踏車上, 要安裝更是麻煩, 於是我想出一個方法, 只要你手機有照像功能就可以了, 在停放好腳踏車後從遠處照一下腳踏車, 在回家時忘記之前停在哪裡, 只要拿出手機看看之前照的相片, 就可以辨認出相對位置, 而不需要精準的定位, 就可以提示你腳踏車之前停放的位置了. (p.s. 記性好的人當然就不需要)

The process of Learning a "tool"

2010-02-24T05:24:00.000-08:00

1. To know why to Learn? (motivation)

2. To Learn how to run.

3. To learn how to use it's basic functions.

4. To learn how to apply this tool to your work.

5. Practice makes perfect.

6. To understand the theory behind this tool.

array pointer and pointer array

2010-02-14T04:57:00.000-08:00

#define COLS 5 /* assume array size = 5*/

int (*xptr)[COLS];  /* this is an array's pointer */

int *xptr[COLS]; /* this is a pointer array */

function pointer example

2010-02-13T08:10:00.000-08:00

#include
#include

void func(int);

main(){
void (*fp)(int);

fp = func;

(*fp)(1);
fp(2);

exit(EXIT_SUCCESS);
}

void
func(int arg){
printf("%d\n", arg);
}

illustrate a[x] means (a+x) equals (x+a) equals x[a]

2010-02-12T00:14:00.000-08:00

code:

int main(void)

{

char a[4]="123";

a[2]='x';

puts(a);

2[a]='y';

puts(a);

return 0;

}

executive result:

12x

12y

科學研究方法

2010-02-06T01:25:00.000-08:00

科學方法包括以下步驟的迭代(Iteration)和遞歸(Recursion)

1. 觀察 - 用感應器官去注意自然現象或實驗中的種種轉變，並記錄下來。

涉及的活動包括眼看、鼻嗅、耳聞和手的觸摸。
2. 解說 - 將從觀察得的事實，加以解釋。
3. 預測 - 根據假說引申出可能的現象
4. 確認 - 透過進一步的觀察和實驗去證實預測的結果
5. 評估 - 根據經驗和結果主觀地評比或下結論。
6. 發表 - 公佈成果。發表有很多形式，像是投稿或是發表會。

reference: wikipedia

[Research] List the keyword

2010-02-03T01:57:00.000-08:00

List the keyword:

o. write a sentence about your topic

o. pull out the keywords and phrases in the sentence above and list them separately.

o. start expanding the list with related terms and synonyms.

o. Are there any larger categories that might lead you to information?

o. Are there any words or phrases that are more specific?

o. now you have a beginning list of key words and phraeses to begin searching for

information.

o. Synonyms and Related Terms

o. Larger Categories

o. Smaller Categories

skype codec policy

2010-02-01T08:29:00.000-08:00

最近想要去驗證skype的一個機制, 通常如果要驗證, 就會想要自己製造出同樣的環境來模擬skype的環境, 理想上要製造出一模一樣的環境, 這樣結果當然會是最正確, 但是既然是模擬, 就不可能一模一樣, 因為一模一樣就不叫模擬了, 叫做實現.

現在問題就是, 我到底可以做到多像, 多接近skype本身的codec policy. 首先, 我要先研究skype的機制, 目前已經初步判定他可能的機制, 接下來要製造出和實驗一模一樣的設定值, 然後套用在模擬的環境中, 在各方面設定都相同的情況下, 做出的結果理論上也應該要相似.

目前所遇到的難點在於, 不是非常確定skype codec的環境設置, 如此一來, 模擬跟實驗的結果就理當會有差異了. 我們先假設skype有按照codec的標準走, 而我們的模擬也要確定有按照codec標準走, 先做到這樣, 再看看結果,

some ways to recover loss packet

2010-01-31T03:37:00.000-08:00

o. FEC (forward error correction)

o. Interleaving

o. Packet Repetition

o. Interpolation

memset 問題

2010-01-28T06:12:00.000-08:00

Function: void * memset ( void * ptr, int value, size_t num );

Today, when I use memset function to initialize a buffer to "0" , I found that the number of byte must to the actually byte of the buffer+1..

However, The third variable of memset is Number of bytes to be set to the value.

Still don't know the reason of this

如何在codeblocks設定連結winsock library

2010-01-17T00:31:00.000-08:00

exec codeblocks

Settings > Compiler and Debugger > Linker Settings > Add >

Go to CodeBlocks Folder (normally C:\Program Files\CodeBlocks)

then MingW then libs and find libws2_32.a and add it.

what is analysis exactly?

2010-01-09T23:54:00.001-08:00

Analysis is the process of breaking a complex topic or substance into smaller parts to gain a better understanding of it.
(from wikipedia)

製作強制關機捷徑 on windows

2010-01-08T03:04:00.001-08:00

1. 在桌面按右鍵->新增->捷徑

2. 在輸入項目的位置處輸入 shutdown -s -t 50 -c "shutdown message"意思是系統會在50秒內強制關機

3. 按下一步完成

4. 點選剛剛新增好的捷徑測試

warning: 請先存檔尚未儲存的檔案

very humorous R example code

2010-01-07T07:00:00.000-08:00

fun <- function() {

ANSWER <- readline("Are you a satisfied R user? ")

if (substr(ANSWER, 1, 1) == "n")

cat("This is impossible. YOU LIED!\n")

else

cat("I knew it.\n")

}

fun()

[LOOP] loop problem

2010-01-05T18:11:00.000-08:00

問題:

mac address 衝突產生 loop message - loop(1) xx.xx.xx.xx.xx.xx to ex1 from ex0. (active)

解決過程:

先看到錯誤訊息, 把訊息中ip mac 傳送的source and destination 畫出來.

發現從不同網卡傳送的封包具有相同的mac address. 結果發現ap 與我的電腦的mac address竟然一樣.

就發現當初在設定ap的時候有個功能是複製你的PC的mac address. 這個功能可能是為了方便填寫mac.

然後你自己要在修改mac address. 不知道為什麼ap 沒有自己預設的mac address而要自己設置.

linux and human.

2010-01-02T23:44:00.001-08:00

[bug] x200 has 48 hours battery life

2010-01-01T01:18:00.001-08:00