MYCNCUK

Measuring large items accurately i.e. +-0.1mm

alanambrose — Wed, 10 Mar 2010 22:27:56 GMT

Hi, OK I'm sure there's an easy answer to this: I would like to measure some items in the 80-100cm range to an accuracy of say 0.1mm. I have a...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Denford Mirac Electronics Refurbishment

CHudson — Tue, 09 Mar 2010 21:40:06 GMT

Hi Guys, I'll start with a little back ground as this is my first post here! I purchased a new RoutoutCNC CNC router at the end of 2009 with a...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

New to MYCNCUK

John Ferguson — Tue, 09 Mar 2010 07:37:35 GMT

Hi, My name is John and I live in Suffolk. I thought I would introduce myself as a new member to this Forum. I have just started the conversion...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

igus drylin

jonm — Tue, 09 Mar 2010 05:31:06 GMT

hi anyone used these in a wood router http://www.igus.co.uk/wpck/default.aspx?PageNr=2376&scroll=957&step=5

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Has Anyone ever used one of these before?

AdCNC — Tue, 09 Mar 2010 01:00:37 GMT

Has anyone used or seen one of these before, if so what are your thoughts on it, as im pondering in using one with 4 servos and a VHF Spindle it...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Ideas sought to deburr a 5mm length of 5mm dia steel!

HankMcSpank — Mon, 08 Mar 2010 16:46:24 GMT

I need to tap into your collective engineering mindsets! Ok, for those who are following my spare time exploits...I'm now faced with making my...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Machine Build Which part of your build leaked the most money?

CNCBlug — Mon, 08 Mar 2010 14:35:18 GMT

Well i have been planning, reading, posting, phoning and adding up all the bits in my cnc birth-plan. As with all plans I have tried to think of...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

RobinCAM v1.0

Robin Hewitt — Sun, 07 Mar 2010 23:52:57 GMT

Couldn't find the G code producing software I wanted so I decided to write my own :whistling: I want to draw lines and arcs with AutoCAD, give...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Another CNC Novice

andyisko — Sun, 07 Mar 2010 20:48:37 GMT

Hi everyone, I have just entered the baffling world of CNC. I sourced what looked to be a reasonably priced and solid cnc router/mill from...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Aluminium Profiles

wizer — Sun, 07 Mar 2010 17:59:36 GMT

Hi Guys I am trying to translate an American CNC plan by CNC Router Parts...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

chain drive

jonm — Sat, 06 Mar 2010 22:28:14 GMT

hi has anyone ever used chain drive for a cnc router, what accuracy could i expect ? upgraded my drivers to zapps msd542...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

PLease help - gcode newbie

scotty — Sat, 06 Mar 2010 14:41:51 GMT

I have joined 2 gcode programs together, both run seperately okay, I have the pause and tool change in the middle of the gcode T0202 see below ...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Newbie Question Anyone have experience of ready made machines

bogstandard — Sat, 06 Mar 2010 14:16:29 GMT

It now looks like I just might be purchasing a CNC mill to fit into my manual shop. But the main problem is, which one? I have already had good...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Nuvva Noob - Dartford, Kent

wizer — Fri, 05 Mar 2010 23:11:30 GMT

Hi guys I'm from nr Dartford, Kent. Been into woodworking, making furniture and stuff for about 6yrs. Got a full woodworking workshop, lots of...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Does such a beast exist (using Z plane as manual-esque drill press)

HankMcSpank — Thu, 04 Mar 2010 16:36:03 GMT

I haven't got a drill press, nor can I justify the space they take up in my meagre little workshop, so I was thinking ...why not use my CNC machine's...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]