http://www.namotorsports.net The newest reviews of our products. Sun, 22 Nov 2009 00:00:00 EST Copyright: (C) North American Motorsports, LLC http://www.namotorsports.net/images/nam.gif http://www.namotorsports.net http://www.namotorsports.net/detail.cfm/part_cd/APSB100044 Thu, 19 Nov 2009 11:56:00 EST http://www.namotorsports.net/detail.cfm/part_cd/APSB100044/review/ROGER My previous vehicle was a Dodge SRT-4 which has a fairly well sorted suspension system. After 5 years of ownership and various tweaks to sway bars and bushings it handled quite sharply. Moving to a 2009 Jetta TDI brought a softer suspension feel with a bit more body roll than I was accustomed to. The installation of the APR Motorsport 27mm Rear Swaybar was just the improvement I was looking for. There is a reduction in body roll through corners. Turn in feels a bit quicker. And a bit of a reduction in Understeer or "Push". Now don't get me wrong the Jetta is no Mini Cooper S, but it is now a much more enjoyable daily driver. The only fault I could find was the welding on the bushing location washers. They were welded on the inboard side. This is where the poly bushings are located and made the installation a bit tougher than it had to be. And by the way, it was about a 40 minute job to put the car on ramps, unbolt the oem swaybar and install the APR swaybar. Just make sure you have the tripple square bit required for the VW bolts. Overall I am very pleased with this product.

-- ROGER ]]> http://www.namotorsports.net/detail.cfm/part_cd/BHBSH-FSI-S2Plus Tue, 17 Nov 2009 09:57:00 EST http://www.namotorsports.net/detail.cfm/part_cd/BHBSH-FSI-S2Plus/review/WILLIAM Don't buy this particular one. The dip stick broke on mine after about 2 days. The stick is just glued onto the bottom of the top cap and over a 2 day period the hot vapors melted the glue and the dip stick fell into my catch tank. I thought it was only mine, but a friend of mine has the same exact one. He put it on a week after mine and 2 days later the same thing happened to him. Warranty is through BSH not NA Motorsports. BSH asked for a picture to prove that it was broken off.

-- WILLIAM ]]> http://www.namotorsports.net/detail.cfm/part_cd/BHBSH-CCTA-BTP Sat, 14 Nov 2009 07:49:00 EST http://www.namotorsports.net/detail.cfm/part_cd/BHBSH-CCTA-BTP/review/ADAM I haven't installed this part on my 07 GTI yet. However, I placed my Order on Nov 12th and I received the package on Nov 13th, which surprised me since I had the shipping method set to Ground. I'm happy to have received this part the day after I ordered it. Good work NAMOTORS!!! I'll keep ordering from you guys!!

-- ADAM ]]> http://www.namotorsports.net/detail.cfm/part_cd/VFA2.0TICK Sun, 08 Nov 2009 10:03:00 EST http://www.namotorsports.net/detail.cfm/part_cd/VFA2.0TICK/review/GARRET Let me begin by saying the product is very well made. The workmanship and engineering that went into the product are outstanding. I have no complaints with the product itself. The installation on the other hand is a different story. The website says Requires NO cutting of the front bumper to fit, this is not entirely true. Maybe the bumper itself and the bumper cover dont requiring cutting, but the Styrofoam bumper requires a fair amount of modification to make it fit. Additionally, there are other parts of the car that must be relocated/modified for proper fitment; (1)The outside air temperature probe is in the way and must be relocated. (2)The driver side horn bracket must be modified so the cold-side pipe will fit. (3)There is a bracket underneath the car that must be modified to allow the throttle body pipe to be installed. (4)The passenger side front inner wheel well brake cooling scope hits the intercooler hot-side pipe. Finally, the installation instructions are minimal help, they should be updated to reflect the twin-intercooler setup vs. the old single intercooler. Again, overall its a great product and I would highly recommend it. Just be aware there are modifications you must make to make it fit properly. Hence the reason I only gave it 4 stars.

-- GARRET ]]> http://www.namotorsports.net/detail.cfm/part_cd/APDPP18T Fri, 06 Nov 2009 07:56:00 EST http://www.namotorsports.net/detail.cfm/part_cd/APDPP18T/review/SHAWN All I can say is that North American Motorsports made my car much more fun. The service and support is top notch. If anyone is thinking about an upgrade they should see you first. "*´¯`*".¸A Fabulous Company!-"*´¯`*".¸An asset to the Audi community-"*´¯`*".¸A++

-- SHAWN ]]> http://www.namotorsports.net/detail.cfm/part_cd/MDSLUXH8 Thu, 05 Nov 2009 09:15:00 EST http://www.namotorsports.net/detail.cfm/part_cd/MDSLUXH8/review/JOSEPH Great results to-date. Quality of the lights and construction are superior. Install is PnP, but realistically a bit tough due to the space constraints of the Bimmer, so small hands or creative tools are a must. Still highly recommended!!!

-- JOSEPH ]]> http://www.namotorsports.net/detail.cfm/part_cd/PE10057 Thu, 29 Oct 2009 05:47:00 EST http://www.namotorsports.net/detail.cfm/part_cd/PE10057/review/JASON All in all im happy, finish is great but the fitment was not so good! Had to use alot of technique to get them to fit flush, also hard to take out once they are in...but i guess nothings perfect

-- JASON ]]> http://www.namotorsports.net/detail.cfm/part_cd/SE70081-01 Thu, 29 Oct 2009 05:45:00 EST http://www.namotorsports.net/detail.cfm/part_cd/SE70081-01/review/JASON Sheets are great, very flexible and can be put on almost anything..Only drawback is they need a better top coat to make it smoother, a little rough..

-- JASON ]]> http://www.namotorsports.net/detail.cfm/part_cd/DDSB-006 Thu, 29 Oct 2009 05:45:00 EST http://www.namotorsports.net/detail.cfm/part_cd/DDSB-006/review/JASON Great leds at a great price..Had them for months now and no problems!

-- JASON ]]> http://www.namotorsports.net/detail.cfm/part_cd/HR54724-55 Thu, 29 Oct 2009 05:44:00 EST http://www.namotorsports.net/detail.cfm/part_cd/HR54724-55/review/JASON I have them installed on my Gli vr-6, let me just say it doesnt get any better. Slightly lower stance, a little bit more than a half inch. Great ride, easy install!!!I recommend these to anyone who is looking for a better look without the harsh ride of coilovers..Oh and NAM is oustanding

-- JASON ]]> http://www.namotorsports.net/detail.cfm/part_cd/KM04010 Wed, 28 Oct 2009 04:19:00 EST http://www.namotorsports.net/detail.cfm/part_cd/KM04010/review/COLIN mine was silver, but who cares lol. super easy install. noticed more aggressive cornering, especially in the rain as it aids to reduce wheel hop. great product!

-- COLIN ]]> http://www.namotorsports.net/detail.cfm/part_cd/NS48.02.66 Wed, 28 Oct 2009 04:16:00 EST http://www.namotorsports.net/detail.cfm/part_cd/NS48.02.66/review/COLIN If you have more power than stock, you really notice this open up the torque band... especially if you are running higher boost pressures. this piece is as noticeable to a modded car as an intake is to a stock car... I do recommend this part!

-- COLIN ]]> http://www.namotorsports.net/detail.cfm/part_cd/BHBSH20TPCV1 Fri, 23 Oct 2009 04:11:00 EST http://www.namotorsports.net/detail.cfm/part_cd/BHBSH20TPCV1/review/Steven NAM associate was patiant and great to deal with!

-- Steven ]]>