Agri Machine Service

Yanmar harvester parts catalog pdf

2026-09-29T17:33:46.610+06:00

Full parts catalog

Here are the download links and technical specs for the Ag600 Harvester Full Parts Catalog PDF.

Download

Ag600 harvester 5 series Error code list PDF

2026-09-14T10:03:20.585+06:00

Ag600 Error Code 5 Series Harvester

Here are the available download links and technical specs for the Ag600 Harvester 5 Series error code list PDF.

Download

Yanmar Harvester Electrical Level 1 Book

2026-09-12T20:37:55.333+06:00

Harvester Book

Here are the available download links and technical specs for the Electrical Level 1 Book PDF.

Lovol RG108 plus harvester catalogue PDF

2026-07-08T16:26:00.388+06:00

Here are the available download links and technical specs for the Lovol RG108 Plus combine harvester PDF.

Lovol RG108 plus harvester

Yanmar error code list pdf

2026-07-06T15:08:01.564+06:00

Yanmar error code list

Lovol harvester pdf

2025-09-16T11:28:00.009+06:00

Lovol Harvester

Yanmar fault code list

2025-05-26T16:51:00.010+06:00

Yanmar harvester error code list.

Yanmar combines the fault code list.

If an error occurs, the hour meter and "Error" are displayed alternately every second.

When you turn ON the buzzer stop button and keep pushing for 5 seconds continuously, the error details will be displayed.

The error details sequentially display the following items every 2 seconds repeatedly and automatically.
Example: hour meter "88"- "2300"-"3".

Yanmar fault code list:

Error Code Ag600 harvester
Sl	Error Code	Error Item	What will happen	Chack point
1	00 08004 9	Communication fault from 'Controller threshing(front' to 'Engine ECU'	Engine output will be restricted.	Cancellation with the key switch OFF. Check the connector, wire-harness, and Fuse.
2	00 08B00 12	Engine controller internal fault: EEPROM ReadWrite fault	Engine output will be restricted.	Power off a few times. Then check if the DTC code is generated again. ECU replacement
3	00 0001D 0	ENG: Accelerator Pedal Position Sensor B: Above normal operational range	Continuous operation is possible.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "B". Power off for a few times. Then check if the DTC code is generated again.
4	00 0001D 1	ENG: Accelerator Pedal Position Sensor B: Below normal operational range	Continuous operation is possible.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "B". Power off for a few times. Then check if the DTC code is generated again.
5	00 0001D 2	ENG: Accelerator Pedal Position Sensor B: Intermittent fault	Continuous operation is possible.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "B". Power off for a few times. Then check if the DTC code is generated again.
6	00 0001D 3	ENG: Accelerator Pedal Position Sensor B: Shorted to high source	Continuous operation is possible.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "B". Power off for a few times. Then check if the DTC code is generated again.
7	00 0001D 4	ENG: Accelerator Pedal Position Sensor B: Shorted to low source	Continuous operation is possible.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "B". Power off for a few times. Then check if the DTC code is generated again.
8	00 0001D 8	ENG: Accelerator Pedal Position Sensor B: Communication fault	Continuous operation is possible.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "B". Power off for a few times. Then check if the DTC code is generated again.
9	00 0001D 15	ENG: Accelerator Pedal Position Sensor B: Not available	Continuous operation is possible.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "B". Power off for a few times. Then check if the DTC code is generated again.
10	00 0005B 0	ENG: Accelerator Pedal Position Sensor A: Above normal operational range	Engine output will be restricted.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "A". Power off for a few times. Then check if the DTC code is generated again.
11	00 0005B 1	ENG: Accelerator Pedal Position Sensor A: Below normal operational range	Engine output will be restricted.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "A". Power off for a few times. Then check if the DTC code is generated again.
12	00 0005B 2	ENG: Accelerator Pedal Position Sensor A: Intermittent fault	Engine output will be restricted.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "A". Power off for a few times. Then check if the DTC code is generated again.
13	00 0005B 3	ENG: Accelerator Pedal Position Sensor A: Shorted to high source	The engine will operate at the same speed.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "A". Power off for a few times. Then check if the DTC code is generated again.
14	00 0005B 4	ENG: Accelerator Pedal Position Sensor A: Shorted to low source	The engine will operate at the same speed.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "A". Power off for a few times. Then check if the DTC code is generated again.
15	00 0005B 15	ENG: Accelerator Pedal Position Sensor A: Not available	Engine output will be restricted.	Check the connector, wire-harness, Accelerator Pedal Position Sensor "A". Power off for a few times. Then check if the DTC code is generated again.
16	00 00064 1	ENG: Oil Pressure: Too Low	Engine output will be restricted.	Check the oil pressure system. Check the wire harness and oil pressure switch. Power off a few times. Then check if the DTC code is generated again.
17	00 00064 4	ENG: Oil Pressure Switch: Shorted to low source	Can still operate, but engine performance may degrade.	Check the connector, wire-harness, and oil pressure switch. Power off a few times. Then check if the DTC code is generated again.
18	00 00066 0	ENG: Boost pressure is abnormally high	Engine output will be restricted.	Power off a few times. The next step is to check if the DTC code is generated again.
19	00 00066 3	ENG: Boost pressure sensor fault (high voltage)	Engine output will be restricted.	Check the connector, wire-harness, and boost pressure sensor. Power off a few times. Then check if the DTC code is generated again.
20	00 00066 4	ENG: Boost pressure sensor fault (low voltage)	Engine output will be restricted.	Check the connector, wire-harness, and boost pressure sensor. Power for a few times. Then check if the DTC code is generated again.
21	00 0006C 3	ENG: Barometric Pressure Sensor: Shorted to high source	Can still operate, but engine performance may degrade.	Check the connector, wire-harness, and Barometric Pressure Sensor. Power off a few times. The next step is to check if the DTC code is generated again.
22	00 0006C 4	ENG: Barometric Pressure Sensor: Shorted to low source	Can still operate, but engine performance may degrade.	Check the connector, wire-harness, and Barometric Pressure Sensor. Power for a few times. Then check if the DTC code is generated again.
23	00 0006E 0	ENG: Engine Coolant Temperature: Too High	Continuous operation is possible.	Check the Engine Cooling System. Check the connector, wire-harness, and Engine Coolant Temperature Sensor. Power for a few times. Then check if the DTC code is generated again.
24	00 0006E 3	ENG: Engine Coolant Temperature Sensor: Shorted to high source	Engine output will be restricted.	Check the connector, wire-harness, and Engine Coolant Temperature Sensor. Power off a few times. Then check if the DTC code is generated again.

00 0006E 4

ENG: Engine Coolant Temperature Sensor: Shorted to low source

Engine output will be restricted.

Check the connector, wire-harness, and Engine Coolant

Temperature Sensor. Power for a few times. Then check if

The DTC code is generated again.

00 0009D 0

ENG: Common rail pressure abnormally high

It can still operate, but high idle speed will be restricted. Engine output will be restricted. Exhaust filter regeneration stops.

Power for a few times. Then check if the DTC code is generated again.

00 0009D 1

ENG: Common rail pressure abnormal lowering

Engine output will be restricted.

Power for a few times. Then check if the DTC code is generated again.

00 0009D 3

ENG: Rail pressure sensor fault (high voltage)

Engine output will be restricted.

Check the connector, wire-harness, and rail pressure sensor. Power for a few times. Then check if the DTC code is generated again.

00 0009D 4

ENG: Rail pressure sensor fault (low voltage)

Engine output will be restricted.

Check the connector, wire-harness, and rail pressure sensor. Power for a few times. Then check if the DTC code is generated again.

00 0009E 0

ENG: System Voltage: Too High

Continuous operation is possible.

Check the alternator. Check battery voltage and wire harness. Power for a few times. Then check if the DTC code is generated again.

00 0009E 1

ENG: System Voltage: Too Low

Continuous operation is possible.

Check the alternator. Check battery voltage and wire harness. Power for a few times. Then check if the DTC code is generated again.

00 000A7 1

ENG: Charge warning

Continuous operation is not possible.

Check the alternator. Check the wire harness and battery charge switch. Power for a few times. Then check if the DTC code is generated again.

00 000A7 4

ENG: Battery Charge Switch: Shorted to low source

Continuous operation is possible.

Check the connector, wire-harness, and battery charge switch. Power for a few times. Then check if the DTC code is generated again.

00 000AE 3

ENG: Fuel temperature sensor fault (high voltage)

Continuous operation is possible.

Check the connector, wire-harness, and fuel temperature sensor. Power for a few times. Then check if the DTC code is generated again.

00 000AE 4

ENG: Fuel temperature sensor fault (low voltage)

Continuous operation is possible.

Check the connector, wire-harness, and fuel temperature sensor. Power for a few times. Then check if the DTC code is generated again.

00 000BE 0

ENG: Engine speed Over speed Condition

The engine stops.

Notify the dealer, and go through a checkup &

maintenance.

Check the engine and the work machine. Check the Engine Fuel Rack Actuator circuit. Power for a few times. Then check if the fault code is generated again.

00 00274 2

ENG: E-ECU internal fault: FlashROM Check

Sum Error (Data Set 1,2)

The engine stops.

Notify the dealer, and go through a checkup &

maintenance.

Reflash the E-ECU's software. Power off a few times. Then, check if the DTC code is generated again.

00 00274 12

ENG: E-ECU internal fault: FlashROM Check

Sum Error (Main Software)

The engine stops.

Notify the dealer, and go through a checkup &

maintenance.

Reflash the software of the E-ECU. Power off a few times. Then check if the DTC code is generated again.

00 00276 2

ENG: E-ECU internal fault: EEPROM Error

(Check Sum, Data)

The engine stops.

Notify the dealer, and go through a checkup &

maintenance.

Reflash the software of the ECU. Power for a few times. Then check if the DTC code is generated again.

00 00276 12

ENG: E-ECU internal fault EEPROM ReadWrite fault

Continuous operation is possible.

Power for a few times. Then check if the DTC code is generated again.

00 00279 3

ENG: SCV Drive circuit + B short circuit

Engine output will be restricted.

Check the connector, wire-harness, SCV, and CR-ECU. Power for a few times. Then check if the DTC code is generated again.

00 00279 5

ENG: SCV drive circuit open circuit and GND

short circuit

Engine output will be restricted.

Check the connector, wire-harness, SCV, and CR-ECU. Power for a few times. Then check if the DTC code is generated again.

00 00279 7

ENG: SCV sticking

Engine output will be restricted.

Check the supply pump and rail pressure sensor, and SCV. Power for a few times. Then check if the DTC code is generated again.

00 0027F 12

ENG: High Speed CAN Communication: Communication fault

It can still operate, but the engine output will be restricted.

Check the connector, wire-harness, other ECU, and battery voltage. Power for a few times. Then check if the DTC code is generated again.

00 0028B 5

ENG: Injector of the 1st cylinder open circuit fault

Engine output will be restricted.

Check the connector, wire-harness, injector, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 0028C 5

ENG: Injector of the 2nd cylinder open circuit fault

Engine output will be restricted.

Check the connector, wire-har, and injector CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 0028D 5

ENG: The injector of the 3rd cylinder open circuit fault

Engine output will be restricted.

Check the connector, wire-harness, injector, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 0028E 5

ENG: Injector of the 4th cylinder open circuit fault

Engine output will be restricted.

Check the connector, wire-harness, injector, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 002A4 5

ENG: Glow + B short circuit or open circuit

Continuous operation is possible.

Check the connector and wire-harness, the Glow relay, and the CR-

ECU. Power for a few times. Then check if the DTC code is generated again.

00 002A4 6

ENG: Glow GND short circuit

Continuous operation is possible.

Check the connector, wire-harness, and Glow relay and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 00437 2

ENG:Sensor 5V : Intermittent fault

Continuous operation is possible.

Check the wire harnesses. Power for a few times. Then check if the DTC code is generated again.

00 00437 3

ENG:Sensor 5V : Shorted to high source

Continuous operation is possible.

Check the wire harnesses. Power for a few times. Then check if the DTC code is generated again.

00 00437 4

ENG:Sensor 5V : Shorted to low source

Continuous operation is possible.

Check the wire harness. Power off a few times. Then check if the DTC code is generated again.

00 00470 0

ENG: E-ECU Internal Temperature: Too High

Continuous operation is possible.

Check the E-ECU surroundings. Power off a few times. Then check if the DTC code is generated again.

00 00470 2

ENG: E-ECU Internal Temperature Sensor: Intermittent fault

Continuous operation is possible.

Power off a few times. Then check if the DTC code is generated again.

00 00470 3

ENG: E-ECU Internal Temperature Sensor: Shorted to high source

Continuous operation is possible.

Power for a few times. Then check if the DTC code is generated again.

00 00470 4

ENG: E-ECU Internal Temperature Sensor Shorted to low source

Continuous operation is possible.

Power for a few times. Then check if the DTC code is generated again.

00 004B2 2

ENG: Immobilizer: System fault

The engine will not start.

Notify the dealer, and go through a checkup &

maintenance.

Check Immobilizer Key.

00 004CF 12

ENG: CR-ECU CAN bus line open circuit detection

Engine output will be restricted.

Check the Connector, wire-harness, Battery, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 00543 0

ENG: Pump protection failure

It can still operate, but high idle speed will be restricted. Engine output will be restricted.

Check the Fuel system and Supply, pump, and Rail pressure sensor. Power for a few times. Then check if the DTC code is generated again.

00 00543 15

ENG: Pump replacement failure

It can still operate, but high idle speed will be restricted. Engine output will be restricted.

Check the Fuel system, Supply, pump, and Rail pressure sensor. Power for a few times. Then check if the DTC code is generated again.

00 005CD 4

ENG: E-ECU Main Relay: Shorted to low source

Continuous operation is possible.

Check the connector, wire-harness, and E-ECU Main Relay. Power off a few times. Then check if the DTC code is generated again.

00 00AED 3

ENG: Injector drive system 1 + B short circuit

Engine output will be restricted.

Check the Connector, wire-harness, injector, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 00AED 5

ENG: Injector drive system 1 open circuit fault

Engine output will be restricted.

Check the Connector, wire-harness, injector, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 00AED 6

ENG: Injector drive system 1 GND short circuit

Engine output will be restricted.

Check the Conne, and wire-harness and injec RRion,r and CR- ECU. Power off a few times. Then check if the DTC code is generated again.

00 00AEE 3

ENG: Injector drive system 2 + B short circuit

Engine output will be restricted.

Check the Connector, wire-harness, injector, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 00AEE 5

ENG: Injector drive system 2 open circuit fault

Engine output will be restricted.

Check the Connector, wire-harness, injector, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 00AEE 6

ENG: Injector drive system 2 GND short circuit

Engine output will be restricted.

Check the Connector, wire-harness, injector, and CR- ECU. Power for a few times. Then check if the DTC code is generated again.

00 7F80B 3

ENG: EGR Stepping Motor A: Circuit fault B

Engine output will be restricted.

Check the connector, wire-harness, and GR Stepping Motor. Power for a few times. Then check if the DTC code is generated again.

00 7F80B 4

ENG: EGR Stepping Motor A: Circuit fault A

Engine output will be restricted.

Check the connector, wire-harness, and EGR Stepping Motor. Power for a few times. Then check if the DTC code is generated again.

00 7F80C 3

ENG: E GR Stepping Motor B Circuit fault B

Engine output will be restricted.

Check the connector, wire-harness, and EGR Stepping Motor. Power for a few times. Then check if the DTC code is generated again.

00 7F80C 4

ENG: E GR Stepping Motor B Circuit fault A

Engine output will be restricted.

Check the connector, wire-harness, and EGR Stepping Motor. Power for a few times. Then check if the DTC code is generated again.

00 7F80D 3

ENG: E GR Stepping Motor C Circuit fault B

Engine output will be restricted.

Check the connector, wire-harness, and EGR Stepping Motor. Power off a few times. Then check if the DTC code is generated again.

00 7F80E 3

ENG: E GR Stepping Motor D Circuit fault B

Engine output will be restricted.

Check the connector, wire-harness, and GR Stepping Motor. Power for a few times. Then check if the DTC code is generated again.

75	00 7F80E 4	ENG: E GR Stepping Motor D Circuit fault A	Engine output will be restricted.	Check the connector, wire-harness, and EGR Stepping Motor. Power for a few times. Then check if the DTC code is generated again.
76	00 7F853 0	ENG: Air Clean Mechanical Malfunction	Engine output will be restricted.	Check the air cleaner system. Check the wire-harness, the Air cleaner switch. Power for a few times. Then check if the DTC code is generated again.
77	00 7F8A0 2	ENG: NE sensor malfunction	Engine output will be restricted.	Check the connector, wire-harness, NE ser, CRCU , and Pulser. Power for a few times. Then check if the DTC code is generated again.
78	00 7F8A0 5	ENG:NE sensor pulser non-input	Engine output will be restricted.	Check the connector, wire-harness, NE sensor, CR-E, and CU Pulser. Power off a few times. Then check if the DTC code is generated again.
79	00 7F8A1 2	ENG: G sensor malfunction	Engine output will be restricted.	Check the connector, wire-harness, G sensor, CR-ECU, and Pulser. Power for a few times. Then check if the DTC code is generated again.
80	00 7F8A1 5	ENG:G sensor pulser non-input	Engine output will be restricted.	Check the connector, wire-harness, G sensor, CR-ECU, and Pulser. Power for a few times. Then check if the DTC code is generated again.
81	00 7F9E7 12	ENG: E-ECU failure.	Continuous operation is possible.	Power for a few times. Then check if the DTC code is generated again.
82	00 7F9E8 12	ENG: E-ECU internal fault: Engine Map Data Version Error	The engine stops. Notify the dealer, and go through a checkup & maintenance.	Reflash the software of the E-ECU. Power for a few times. Then check if the DTC code is generated again.
83	00 7F9EA 8	ENG: Immobilizer Pulse Communication fault	The engine will not start. Notify the dealer, and go through a checkup & maintenance.	Check the connector, wire-harness, and battery voltage. Power for a few times. Then check if the DTC code is generated again.
84	00 7F9EA 12	ENG: Immobilize: CAN Communication fault	The engine will not start. Notify the dealer, and go through a checkup & maintenance.	Check the connector, wire-harness, and battery voltage. Power for a few times. Then check if the DTC code is generated again.
85	00 7FA1E 5	ENG: CR-ECU main relay output error 1	The engine stops. Notify the dealer, and go through a checkup & maintenance.	Check the connector, wire-harness, main relay, the ignition switch,h, and E-ECU, CR-ECU. Power for a few times. Then check if the DTC code is generated again.
86	00 7FA1E 6	EN G: CR-ECU main relay output error 2	The engine stops. Notify the dealer, and go through a checkup & maintenance.	Check the connector, wire-harness, main relay, the ignition switch, and E-ECU, CR-ECU. Power for a few times. Then check if the DTC code is generated again.
87	00 7FA33 2	EN G: “Pump learning not performed” alarm	Continuous operation is possible.	Check the fault indication again after turning the power switch on/off and starting the engine. Pump learning value write.
88	00 7FAF1 12	ENG: CR-ECU CPU monitoring IC fault	Can still operate, but engine output will be restricted.	Power for a few times. Then check if the DTC code is generated again.
89	00 7FAF2 12	EN G: CR-ECU CPU fault	Can still operate, but engine output will be restricted.	Power for a few times. Then check if the DTC code is generated again.
90	00 7FAF3 12	ENG: QR data correction input fault	Engine output will be restricted.	Power for a few times. Then check if the DTC code is generated again. Rewrite the CR-ECU software.
91	00 7FAF4 4	ENG:(Circuit) low charge failure	Engine output will be restricted.	Power for a few times. Then check if the DTC code is generated again.
92	00 7FAF5 3	ENG:(Circuit) overcharge failureThe engine	e stops. Notify the dealer, and go through a checkup & maintenance.	Power for a few times. Then check if the DTC code is generated again.
93	00 7FAF6 12	EN G: CR-ECU Flash RO checksum error. The engine	e stops. Notify the dealer, and go through a checkup & maintenance.	Power for a few times. Then check if the DTC code is generated again. Rewrite the CR-ECU software.
94	00 7FAF7 2	ENG: Data verification error between ECUs (CR-ECU Software P/N)	Engine output will be restricted.	Check if another error is occurring at the same time. Check whether it was replaced with an E-ECU or a CR-ECU.
95	00 7FAF8 2	ENG: Data verification error between ECUs (data error)	Engine output will be restricted.	Check if another error is occurring at the same time. Check whether it was replaced with the E-ECU or the ECU.
96	00 7FB42 0	ENG: CR-ECU sensor 5 V circuit 1 fault (high voltage)	Engine output will be restricted.	Check the wire harness. Power for a few times. Then check if the DTC code is generated again.
97	00 7FB42 1	ENG: CR-ECU sensor 5 V circuit 1 fault (low voltage)	Engine output will be restricted.	Check the wire harness. Power for a few times. Then check if the DTC code is generated again.
98	00 7FB43 0	ENG: CR-ECU sensor 5 V circuit 2 fault (high voltage)	Engine output will be restricted.	Check the wire harness. Power for a few times. Then check if the DTC code is generated again.
99	00 7FB43 1	ENG: CR-ECU sensor 5 V circuit 2 fault (low voltage)	Engine output will be restricted.	Check the wire harness. Power for a few times. Then check if the DTC code is generated again.
100	00 7FBD5 12	ENG: QR data not written	Engine output will be restricted.	Power for a few times. Then check if the DTC code is generated. Rewrite the CR-ECU QR data.
101	00 7FBD5 13	ENG: QR data fault	Engine output will be restricted.	Power for a few times. Then check if the DTC code is generated again.
102	00 7FBF1 5	EN G: NE and G sensor pulser non-input at the same time	The engine stops. Notify the dealer, and go through a thorough checkup & maintenance.	Check the connector, wire-harness, NE sensor, and G sensor. Power on a few times. Then check if the DTC code is generated again. Check the eck Pulser attachment.

103

00 000AE 0

ENG: “Fuel temperature high” alarm

Continuous operation is possible.

Check the connector, wire-harness, Fuel temperature

sensor, and CR-ECU. Power for a few times. Then check if the DTC

code is generated again.

104

00 7F859 0

ENG: Oily Water Separator: Mechanical

Malfunction

Engine output will be restricted.

Check the oily water separator system. Check the harness, the Oily water separator switch. Power for a few times. Then check if the DTC code is generated again.

105

00 0006E 2

ENG: Engine Coolant Temperature Sensor: Intermittent fault

A coolant temperature of 30 °C will ensure continuous operation. （EGR valve does not work）

1. Poor fit of the connector .2.Poor wiring

harness（Sensor signal line, sensor 5V line,or sensor GND

line wiring is broken ）3.Cooling water temperature sensor

Failure 4. E-ecu internal circuit failure.

106

00 0027E 2

ENG: Enne: Malfunction

The engine stops. Notify the dealer and go through checkup & maintenance. The

The wiring harness is poor (rack actuator wire, power supply short circuit, or GND short circuit), (2) the engine speed is increased due to the rotation load on the machine side, (3) the FOP control is abnormal.

107

00 0027E 3

ENG: Engine Fuel Rack Actuator: Shorted to high. The engine

generator stops. Notify the dealer and go through checkup & maintenance.

1. Poor coordination of the connector, 2. Poor wiring of the wiring harness (Rack actuator wire power short circuit), 3. Rack actuator failure, 4. E-ecu internal circuit failure

108

00 0027E 4

ENG: Engine Fuel Rack Actuator: Shorted to low. The engine

IIS stopped. Notify the demand and go through checkup & maintenance.

1. Poor coordination of the connector, 2. Poor wiring of the wiring harness (Rack actuator wire power short circuit), 3. Rack actuator failure, 4. E-ecu internal circuit failure

109

00 0027E 7

ENG: Engine Fuel Rack Actuator: Mechanical. The engine

stops. Notify the dealer and go through checkup & maintenance.

1. Rack stuck

110

00 00436 4

ENG: Engine Fuel Injection Pump Speed

Seor: Shorted to low source

The engine ops. Notify the dealer and go through checkup & maintenance.

1. Poor coordination of the connector, .2 Insufficient engine speed (Low battery voltage, starting motor system failure, fuel freezing, and the increase of working machine combined with slewing load), 3. Poor wiring harness (Sensor signal wire broken or GND short circuit, starting motor signal line power short circuit), 4. Speed sensor fault, 5. E-ECU internal circuit fault

111

00 004BA 3

ENG: Engine Fuel Rack Position Sensor: Shorted to high source

The engine operates at the output/ speed limit. (Rack position control failed, but speed control activation.)

(1) Poor coordination of the connector, (2) Poor wiring harness (Sensor GND wire broken, sensor signal wire power short circuit, rack actuator wire GND short circuit), (3) Rack position sensor fault, (4) Rack actuator failure, (5) E-ECU internal

circuit failure

112

00 004BA 4

ENG: Engine Fuel Rack Position Sensor orhortedlow source

The engine operates at the output/ speed limit. (Rack position control failed, but speed control activated)

(1) Poor coordination of the connector, (2) Poor wiring harness (Sensor signal wire broken or GND short circuit, sensor 12V broken wire or GND short circuit), (3) Rack position sensor fault, (4) E-ECU internal circuit failure

113

00 7F801 2

ENENG Engineuel Rack Actuator Relay: intermittent fault

EngiThe engines. Notify the dealer, and go through checkup & maintenance.

(1) Poor coordination of the connector, (2) Poor wiring harness (Rack actuator relay wire broken), (3) E-ECU internal circuit failure

114

00 7F801 3

ENG: Engine Fuel Rack Actuator Relay: Circuit fault B

The engine stops. Notify the dealer, and go through checkup & maintenance.

(1)Poor coordination of the connector, (2) Poor wiring of the ring harness (Rack actuator relay wire power short circuit), (3) Rack actuator relay fault, (4)E-ECU internal circuit failure

115

00 7F801 4

ENG: Engine Fuel Rack Actuator Rela: Circuit fault A

The engine stops. Notify the dealer, and go through checkup & maintenance.

(1)Poor coordination of the connector, (2) Poor wiring of the wiring harness (Rack actuator relay wire broken or GND short circuit

(3) Rack actuator relay fault, (4)E-ECU internal circuit failure

116

00 7F802 2

ENG: Cold Start Device: Intermittent fault

When the CSD is off, the engine runs continuously

(1) Poor connector coordination, (2) Poor wiring of the harness

(CSD solenoid wire broken), 3)E-ECU internal circuit failure

117

00 7F802 3

ENG: Cold Start Device: Circuit fault B

When the CSD is off, the engine runs continuously.

(1) Poor coordination of the connector, (2) Poor wiring harness (CSD solenoid valve wire GND short circuit), (3) CSD solenoid valve fault, (4) E-ECU internal circuit failure

118

00 7F802 4

EN G: Cold Start Device: Circuit fault A

When the CSD is off, the engine runs continuously.

(1) Poor coordination of the connector, (2) Poor wiring harness (CSD solenoid valve wire GND short circuit), (3) CSD solenoid valve fault, (4) E-ECU internal circuit failure

119

00 7F803 2

ENG: Air Heater Relay: Intermittent fault

When the starting aid relay is disconnected, the engine

runs continuously

(1) Poor coordination of the connector, (2) Poor wiring harness (Starting auxiliary relay wire broken ), (3) E-ECU internal circuit failure

120

00 7F803 3

ENG: Air Heater Relay: Circuit fault B

When the starting aid relay is disconnected, the engine

runs continuously

(1) Poor coordination of the connector, (2) Poor wiring harness (Starting auxiliary relay line wire GND short circuit), (3) CSD solenoid valve fault, (4) E-ECU internal circuit failure

121

00 7F803 4

ENG: Air Heater Rela: Circuit fault A

When the starting aid relay is disconnected, the engine runs continuously

(1) Poor coordination of the connector,

(2) Poor wiring harness

(The starting auxiliary relay line is broken or the power supply is short-circuited),

(3) CSD solenoid valve fault,

(4) E-ECU internal circuit failure

122

00 7F80D 4

ENG: EGR Stepping Motor C: Circuit fault

The restricted engine operates at

92% output and 1800min-1

(1) Poor coordination of the connector,

(2) Poor wiring harness (The power supply of the EGR stepper motor C phase line is short-circuited),

(3) EGR stepper motor C phase fault,

(4) E-ECU internal circuit failure

123

00 7F84A 0

ENG: EngineCoolantTemperature Abnormal temperature

Continuous operation is possible.

(1) The engine is overheated,

(2) The engine cooling water is insufficient,

(3) The engine cooling device is faulty,

(4) The wiring harness of the water temperature switch is short-circuited to GND.

(5) The water temperature switch is faulty,

(6) E-ECU internal circuit failure

124

28 03B00 0

Fuel sensor broken

The fuel meter display is not possible.

Check whether fuses are blown or not.

Check the connector. Ensure the connection of the connector and the terminal.

125

28 08110 12

Communication fault from 'Combination meter'

The meter is not working properly.

The type of abnormal behavior is different depending on the model specification.

The connector is coming off.

Wiring disconnection. Harness short circuit. The controller is abnormal.

126

28 08B10 12

Meter internal fault: EEPROM ReadWrite fault

The meter is not operating properly.

The type of abnormal behavior is different depending on the model specification.

Connector coming off. Wiring disconnection.

Harness short circuit. The controller is abnormal. Power for a few times. Then check if the DTC code is generated again.

127

28 08610 12

Meter internal fault: CAN data translation fault

The meter is not working properly.

The type of abnormal behavior is different depending on the model specification.

Connector coming off. Wiring disconnection. Harness short circuit. The controller is abnormal.

128

28 08100 9

Communication fault from 'Engine ECU' to

'Meter'

Engine-related information is not updated.

Check fuse disconnection and connector coming off, wiring disconnection, and harness short circuit.

129

28 08106 9

Communication fault from 'Column ECU' to

'Meter'

The display of the height sensor, etc., does not appear normally.

Check fuse disconnection and connector coming off, wiring disconnection, and harness short circuit.

130

28 00062 5

Fuel gauge sensor error

The combination can not display the amount of fuel.

Connector Wire harness Combination meter Fuel gauge sensor

Check the connection with the gauge sensor.

131

28 00099 9

CAN communication error from the Engine

ECU.

A combination can not display the very engine information.

Engine ECU Battery Connector Wire harness

Combination meter

Check the connection with the Engine ECU.

Dhan kata machine price in bangladesh

2023-10-27T23:32:00.013+06:00

Good news! Good news! Good news!

There is a golden opportunity to purchase ACI Motors agricultural machinery with government subsidy nationwide. Agricultural entrepreneurs are getting 50% or 70% (Hourly and coastal areas) government subsidy to purchase ACI Motors agricultural machinery. So contact your nearest ACI Motors representative soon and purchase your required agricultural machinery with a government subsidy.

Yanmar Harvester government subsidy

Yanmar combine harvester of Japanese technology is the best all-rounder in the paddy field.

From cutting rice or wheat to threshing, threshing, and bagging. Also, consumption is only 8-9 liters per acre. Also, after harvesting, the hay remains intact. That's why agricultural entrepreneurs trust Yanmar combine harvesters for field performance.

Good news for agricultural entrepreneurs! In the upcoming Amon'23 season, there is a subsidy (discount) of Tk 13 lakh on a limited number of harvesters from ACI and Yanmar if you buy a Yanmar harvester AG600. For details contact your nearest ACI Motors service representative or call our customer care number 16533 (Saturday to Thursday 9 am to 10 pm).

Yanmar harvester details

The market price of Japanese technology Yanmar AG600 Tank Type Harvester price is Tk.39,00,000.

Buy a Yanmar AG600 harvester this Amon season only and get a subsidy (discount) of Tk 13,00,000 from ACI and Yanmar.

Yanmar AG600 (Tk. 39,00,000 - 13,00,000) = With an investment of only Tk. 26,00,000 you can become the proud owner of Yanmar harvester. Downpayment (one-time payment) Tk.6,00,000. There is also an interest-free 6-month installment option.

ACI Sales team member numbers

B: Note: ACI and Yanmar subsidy is for a limited period.

Sir, you want to buy Yanmar Harvester from which upazila in which district?

fzs v3 price in bd - fzs v3 price in bd 2024

2023-10-05T15:23:00.002+06:00

Engine:

The engine type is air-cooled with a 4-stroke, SOHC, and 2-valve system. It has a displacement of 149 cc and a bore and stroke measurement of 57.3 mm x 57.9 mm. The compression ratio is 9.6:1, and the maximum horsepower is 9.1 kW (12.4PS) at 7,250 r/min. The maximum torque is 13.3 N.m (1.4 kg f.m) at 5,500 r/min. The starting system type is an electric starter.

YAMAHA FZS V3 METALLIC GRAY

YAMAHA FZS V3 BD PRICE: Yamaha FZS v3 Price in BD is 256,000.00Tk

Dimensions:

The overall length and width of the vehicle are 1,990mm/2,000mm(Deluxe) and 780mm, respectively, while its height is 1,080mm. The seat height is 790mm, and the wheelbase measures 1,330mm. The minimum ground clearance is 165mm, and the curb weight is 135kg.

YAMAHA FZS V3 METALLIC BLACK

Chassis:

The front tire size is 100/80-17M/C 52P-Tubeless, while the rear tire size is 140/60R17M/C 63P-Radial Tubeless. Additionally, your motorcycle has a single-channel ABS system, and the front and rear brakes are both disc brakes with sizes of 282mm and 220mm, respectively.

YAMAHA FZS V3 MAJESTY RED

Others information:

The fuel tank capacity is 13 liters, and the carburetor type/fuel supply is not specified. The transmission type is a constant mesh, 5-speed system, while the brake/tail light is 12V, 21/5W x 1 (for FZ FI). The suspension type is a telescopic fork at the front and a 7-step adjustable Monocross suspension at the rear. The headlight is LED, and the taillight is LED (for FZ-S FI & Deluxe). Additionally, the clock is digital, the speedometer is digital, and the battery is 12V. The motorcycle has an ECO indicator and a side-stand engine cut-off switch.

Mini truck price in Bangladesh

2023-06-22T00:09:00.016+06:00

ACI Motors Agricultural Machinery Rice Harvester Yanmar, Rice Transplanter, Sonalika Tractor, Power Tiller, Agriculture Drone Spray, Also Commercial Vehicle Foton Truck.

Doing business.

Foton is the world's number 1 selling commercial vehicle brand. More than 10 million people around the world have trusted Foton's various models of commercial vehicles.

Foton 3.5 Ton Truck

Why buy Foton commercial vehicle?

6 free services, If you buy a Foton Truck, you get 6 free after-sales services

ACI Motors provides countrywide spare parts and service guarantees so Foton customers can rest assured of car service and spare parts.

Latest technology engine

4 Cylinder QC engine is used in 1-ton and 1.2- ton Truck Foton. This engine is very fuel efficient and powerful as it is made with modern technology.

The 1.5-ton Foton uses an ISUZU 4JB1 series turbocharger and intercooler engine which is fuel efficient and durable.

The 3.5-ton Truck of Foton uses the powerful Cummins engine of world-famous America.

Features

Foton 3.5 ton Features

Technical Parameters:

Complete vehicle main dimensions Overall dimensions (L x W x H) mm	6995 X 2250 X 2350
Cargo Dimensions Length (L x W x H) mm	5150 X 2050 X 550
Wheelbase (mm)	12’6”’/3800mm
Complete vehicle weight GVW (kg)	7150 kg
Curb weight (kg)	3650 kg
Rated payload (kg)	3500 kg
Minimum ground clearance (mm)	190
Engine model	Cummins F3.8s3141
Engine type	Vertical, In-line, Water-cooling, Four-stroke, turbocharging
Engine CC	3760
Engine Cylinder	4
Engine Hors Power	156 HP
Max torque (N.m/rpm)	500/1200 - 1900
Rated power (kw/rpm)	105/2600(143hp)
Transmission model	6TS55
Transmission ration	6 Speed (6 Forward, 1 Reverse
Clutch type 325x210	Diaphragm spring clutch
Service brake type	Air, front, and rear drum
Parking brake type	Air break breaking
auxiliary brake type	Exhaust brake
Battery Electric system	24V, 1 00AH*2
Wheel and tire size	6+ 1, 7.50R16
Fuel tank capacity (L)	120

Foton 1.5 ton pickup price in bangladesh

2023-06-19T22:51:00.006+06:00

Technology Leading Into The Future

Foton 1.5 Ton

Foton 1.5 ton pickup price in Bangladesh Price: 1500000/-

Yamaha fzs v3 price in Bangladesh

Technical Specifications (1.5 ton)

Product Model Foton BJ 1 041

Cabin	Cabin type	Single-row seat, Tiltable
	Persons in cab	3
	Steering type	Adjustable, Power steering
Dimensions	Wheelbase (mm)	2800
	Overall dimensions (L x W x H) mm	5425 X 1910 X 2240
	Cargo Dimensions (L x W x H) mm	3655 X 1810 X 360
Weights	GVW (kg)	2990
	Curb weight (kg)	1500
	Rated payload (kg)	1490
Vehicle performance	Max. speed (km/h)	95
	Max. slope of climb (%)	35
	Min. turning diameter (m)	11
	Min. ground clearance (mm)	1858
Engine	Engine model	BJ493ZLQV1 (ISUZU 4JB1 tech.)
	Engine type	Vertical, In-line, Water-cooling, Four strokes, turbocharging
	Displacement (L)	2.77
	Rated power (kw/rpm)	76/3600 (103hp)
	Max torque (N.m/rpm)	225/1900-2200
Clutch & Transmission	Transmission model	JC5-28
	Transmission ration	5 Speed ( 5 Forward, 1 Reverse )
	Clutch type	<p260 X <p160 Diaphragm spring clutch
Braking system	Service brake type	Hydraulic, fronVrear drum
	Parking brake type	Central drum brake
	Auxiliary brake type	Exhaust brake
Batter	Electric system	12V, 120AH
Wheel & tire size	6+ 1, 6.50R16
Fuel tank capacity (L)	80

Features:

Foton 1.5 ton Features

aci lovol harvester price in bangladesh

2023-03-19T18:30:00.002+06:00

ACI Lovol is a Chinese manufacturer of agrarian outfits, including harvesters. They produce a range of different harvester models, including grain harvesters, sludge harvesters, and rice harvesters.

One of their popular models is the ACI Lovol Corn Harvester FC- 1. It's a tone-propelled harvester that's designed for harvesting sludge in colorful field conditions. The harvester has an important machine, wide tires, and a specially designed sludge head that can fluently pick up and separate sludge from the stalks. Another model is the ACI Lovol Grain Harvester, which is designed for harvesting small grains like wheat, barley, and rice.

It has a large capacity grain tank, a malleable knife bar, and an important machine that can handle tough harvesting conditions.ACI Lovol harvesters are known for their continuity, effectiveness, and ease of operation. They're designed to increase productivity and reduce labor costs for growers. also, ACI Lovol offers after- deals support and corridor vacuity to ensure that their outfit performs reliably numerous times.

Lovol Heavy Industry Co., Ltd. is a Chinese manufacturer that produces a range of agricultural machinery, including harvesters. Here is some information about Lovol harvesters:

Lovol harvesters come in a range of models for different crops, including wheat, rice, corn, and soybeans.
Lovol harvesters are designed to be efficient and reliable, with advanced technology that improves their performance in the field.
Lovol harvesters are equipped with features such as automatic leveling, automatic unloading, and automatic speed control, which make them easier to use and improve their productivity.
Lovol harvesters are built with high-quality materials and undergo rigorous testing to ensure their durability and longevity.
Lovol Harvesters are sold in many countries around the world, and the company provides customer support and service to ensure their customers are satisfied with their purchases.

Overall, Lovol harvesters are a reliable and efficient choice for farmers looking for a quality harvester

aci lovol harvester price in Bangladesh:

The price of LOVOL Harvester is tk.27,00,000/-. (Price Changable)
The LOVOL harvester is available on a government subsidy, priced at tk 14,75,000 with a 50% subsidy and tk 9,85,000 with a 70% subsidy.

Fuel pump runs but no pressure

2022-10-28T23:54:00.001+06:00

Fuel Method:

The fuel system works with the help of a high-pressure pump by spraying diesel in the compression chamber of the engine cylinder through the high-pressure injector in a timely manner resulting in firing in the cylinder.

Yanmar fuel pump

Fuel pump runs but no pressure:

This is called the heart of the engine. Fuel pump work is given to the engine cylinder by high pressurizing the fuel. A pump has many components and the plaza is very dry.

Either way, if there is a leak or air somewhere in the fuel line mixed with the particulate water adulterated diesel kerosene in the pump, the plaza is destroyed very quickly.

This means that in order to keep the fuel pump in good condition, you have to use the original micro fuel filter and good diesel all the time. The opening pressure of the Sonalika tractor's fuel pump is 220 to 250 bar.

Injector:

Its job is to spray the high-pressure fuel obtained from the high-pressure pump in the compression chamber of the engine cylinder-like tiny particles of mist. The better the spray, the more power the car will have. Two types of injection are used in Sonalika tractors.

1. S-type 2. P-type. The S-type nozzle has four and the P-type nozzle has five. In other words, if the diesel is dirty, the holes will be closed in a short time. As a result, it will be difficult for the tractor to take the load and black smoke comes out through the silencer box.

What is meant by fuel pump timing?

At the right time i.e. compression stroke 10 to 30 degrees before reaching TDC. The system of fuel injection events is called injection timing or pump timing.

What is Fuel Pump's Timing Advance and Retard?

If the fuel injection is before the right time it is called advance and if it is after the right time it is called retard. If the fuel pump turns in the opposite direction, the timing will be returned.

What will be the problem if the fuel injection timing is not right?

1. Fuel cannot go completely, that is, maximum power cannot be obtained from fuel.

2. Fuel will be wasted.

3. The engine will overheat and the engine will not sound right.

4. If it is advanced, black smoke will come out and if it is returned, white smoke will come out.

There are 7 important aspects to check when setting up an engine.

1. You need to check the clearance of the thrust washer when setting the crankshaft.

2. The clearance of main and big-end bearings should be checked.

3. The pressure of the good pump needs to be checked.

4. Clearance of the piston, piston ring, the liner should be checked.

5. Engine timing needs to be checked.

6. Check if the engine valve stands leaking. And the head bolts have to be tightened well.

7. Tapate clearance needs to be checked.

Thanks for reading......

Yamaha motorcycle mt 03-india price

2022-10-11T01:15:00.002+06:00

Introduction:

Welcome to the Yamaha world of motorcycling! As the owner of the YAMAHA MT03, you are benefiting from Yamaha's vast experi and the newest technology regarding the design and manufacture of high-quality products, which have Yamaha a reputation for dependability.

Yamaha motorcycle MT 03

Note: Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.

Yamaha motorcycle MT 03 India price: Rs 3 Lak.

Safety Tips Guideline:

Make sure that you are qualified and that you only lend your mo motorcycle to other qualified operators.
Know your skills and limits. Staying within your limits may help you to avoid an accident.
We recommend that you practice riding your motorcycle where there is no traffic until you have become thoroughly familiar with the motorcycle and all of its controls.
Many accidents have been caused by an error from the motorcycle operator. A typical error made by Always wearing an approved helmet. the operator is veering wide on a turn due to excessive speed or under-cornering (insufficient lean angle for the speed).
Always obey the speed limit and hazard. never travel faster than warranted by road and traffic conditions.
The use of a jacket, heavy boots, trousers, gloves, etc., is effective in preventing or reducing abra.
Always signal before turning or lacerations. changing lanes. Make sure that other motorists can see you.
The posture of the operator and Never wearing loose-fitting clothes, otherwise they could catch on the control levers, footrests, or wheels passenger is important for proper and causes injury or an accident. control. Always wear protective clothing.
The operator should keep both that cover your legs, ankles, and hands on the handlebar and feet. The engine or exhaust sys both feet on the operator's footrests during operation to maintain operation and can cause control of the motorcycle.
The passenger should always hold onto the operator, the seat strap, or the grab bar, if equipped, with both hands and keep both feet on the passenger footrests. Never carry a passenger unless he or she can firmly place both feet on the passenger footrests.
Never ride under the influence of alcohol or other drugs.

Protective Apparel:

The majority of fatalities from motorcycle accidents are the result of head injuries. The use of a safety helmet is the single most critical factor in the prevention or reduction of head injuries.
Wear a face shield or goggles. Wind in your unprotected eyes could contribute to an impairment of vision that could delay seeing burns. A passenger should also observe the above precautions.
Always wear an approved helmet.
Wear a face shield or goggles. wind in your unprotected eyes could contribute to an impairment of vision that could delay seeing a hazard.
The use of a jacket, heavy boots, trousers, gloves, etc. Is effective in preventing or reducing abrasion or lacerations.
Never wear loose-fitting clothes, otherwise, they cloud catch on the control levers, footrests, or wheels and cause injury or an accident.
Always wear protective clothing that covers your legs, ankles, and feet. the engine or exhaust system becomes very hot during or after the operation and can cause burns.
A passenger should also observe the above precautions.

Avoid Carbon Monoxide Poisoning:

All engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nausea, confusion, and eventually death. Carbon Monoxide is a colorless, odorless, tasteless gas that may be present even if you do not see or smell any engine exhaust. Deadly levels of carbon monoxide can collect rapidly and you can quickly be overcome and unable to save yourself. Also, deadly levels of carbon monoxide can linger for hours or days in enclosed or poorly ventilated areas. If you experience any symptoms of carbon monoxide poisoning, leave the area immediately, get fresh air, and SEEK MEDICAL TREATMENT.

Do not run the engine indoors. Even if you try to ventilate engine exhaust with fans or open windows and doors, carbon monoxide can rapidly reach dangerous levels.
Do not run the engine in poorly ventilated or partially enclosed areas such as barns, garages, or carports.
Do not run the engine outdoors where engine exhaust can be drawn into a building through openings such as windows and doors.

Loading:

Adding accessories or cargo to your motorcycle can adversely affect stability and handling if the weight distribution of the motorcycle is changed. To avoid the possibility of an accident, use extreme caution when adding cargo or accessories to your motorcycle. Use extra care when riding a motorcycle that has added cargo or accessories. Here, along with the information about accessories below, are some general guidelines to follow if loading cargo onto your motorcycle:

The total weight of the operator, passenger, accessories, and cargo must not exceed the maximum load limit.

The operation of an overloaded vehicle could cause an accident.

Maximum load: 160 kg (353 lb)

When loading within this weight limit, keep the following in mind:

Cargo and accessory weight should be kept as low and close to the motorcycle as possible. Securely pack your heaviest items as close to the center of the vehicle as possible and make sure to distribute the weight as evenly as possible on both sides of the motorcycle to minimize imbalance or instability.
Shifting weights can create a sudden imbalance. Make sure that accessories and cargo are securely attached to the motorcycle before riding. Check accessory mounts and cargo restraints frequently.
Properly adjust the suspension for your load (suspension-adjustable models only), and check the condition and pressure of your tires.

This vehicle is not designed to pull a trailer or to be attached to a sidecar.

Genuine Yamaha Accessories:

Choosing accessories for your vehicle is an important decision. Genuine Yamaha accessories, which are available only from a Yamaha dealer, have been designed, tested, and approved by Yamaha for use on your vehicle. Many companies with no connection to Yamaha manufacture parts and accessories or offer other modifications for Yamaha vehicles. Yamaha is not in a position to test the products that these aftermarket companies produce. Therefore, Yamaha can neither endorse nor recommend the use of accessories not sold by Yamaha or modifications not specifically recommended by Yamaha, even if sold and installed by a Yamaha dealer.

Aftermarket Parts, Accessories, and Modifications

While you may find aftermarket products similar in design and quality to genuine Yamaha accessories, recognize that some aftermarket accessories or modifications are not suitable because of potential safety hazards to you or others. Installing aftermarket products or having other modifications performed to your vehicle that change any of the vehicle's design or operation characteristics can put you and others at greater risk of serious injury or death. You are responsible for injuries related to changes in the vehicle. Keep the following guidelines in mind, as well as those provided under "Loading" when mounting accessories.

Never install accessories or carry cargo that would impair the performance of your motorcycle. Carefully inspect the accessory before using it to make sure that it does not in any way reduce ground clearance or cornering clearance, limit suspension travel, steering travel or control operation, or obscure lights or reflectors.
Accessories fitted to the handlebar or the front fork area can create instability due to improper weight distribution or aerodynamic changes. If accessories are added to the handlebar or front fork area, they must be as lightweight as possible and should be kept to a minimum.
Bulky or large accessories may seriously affect the stability of the motorcycle due to aerodynamic effects. Wind may attempt to lift the motorcycle, or the motorcycle may become unstable in cross winds. These accessories may also cause instability when passing or being passed by large vehicles.

Yamaha motorcycle MT 03

Canister.
Coolant reservoir.
Main fuse.
Tool kit.
Passenger seat lock.
Storage compartment.
Shock absorber assembly spring preload adjusting ring.
Shift pedal.
Engine oil drain bolt.
Engine oil filter cartridge.

Yamaha motorcycle MT 03

The fuse box.
Battery.
Fuel tank cap.
Auxiliary light.
Headlight.
Engine oil filler cap.
Engine oil level check window.
Brake pedal.
Rear brake light switch.
Rear brake fluid reservoir.

Specifications:

Dimensions: Overall length: 2090 mm (82.3 in) Overall width: 755 mm (29.7 in) Overall height: 1070 mm (42.1 in) Seat height: 780 mm (30.7 in) Wheelbase: 1380 mm (54.3 in) Ground clearance: 160 mm (6.30 in) Minimum turning radius: 2.9 m (9.51 ft).

Fuel: Recommended fuel Unleaded gasoline (E10 acceptable) Octane number (RON): 90.
Fuel tank capacity: 14 L (3.7 US gal, 3.1 Imp.gal) Fuel reserve amount: 3.0 L (0.79 US gal, 0.66 Imp.gal).

Fuel injection: *Throttle body: ID mark: BR51.

Weight: Curb weight: 169 kg (373 lb).

Engine: Combustion cycle: 4-stroke Cooling system: Liquid-cooled Valve train: DOHC Cylinder arrangement: Inline Number of cylinders: 2-cylinder Displacement: 321 cm³ Bore x stroke: 68.0 x 44.1 mm (2.68 x 1.74 in) Starting system: Electric starter.

Engine oil: Recommended brand: YAMALUBE
YAMALUBE SAE viscosity grades: 10W-40 Recommended engine oil grade: API service SG type or higher, JASO standard MA "Engine oil quantity: Oil change: 1.80 L (1.90 US qt, 1.58 Imp. qt).
With oil filter removal: 2.10 L (2.22 US qt, 1.85 Imp.qt).

Coolant quantity: Coolant reservoir (up to the maximum level mark): 0.25 L (0.26 US qt, 0.22 Imp.qt) Radiator (including all routes): 0.81 L (0.86 US qt, 0.72 Imp.qt).
Drivetrain: *Gear ratio: 1st: 2.500 (35/14) 2nd: 1.824 (31/17) 3rd: 1.348 (31/23) 4th: 1.087 (25/23) 5th: 0.920 (23/25) 6th: 0.800 (24/30).
Front tire: Type: Tubeless Size: 110/70R-17M/C 54H Manufacturer/model: DUNLOP/GPR-300F.

Rear tire: Type: Tubeless Size: 140/70R-17M/C 66H Manufacturer/model: DUNLOP/GPR-300.
Loading: Maximum load: 160 kg (353 lb) (Total weight of rider, passenger, cargo, and accessories).
Front brake: Type: Hydraulic single disc brake.
Rear brake: Type: Hydraulic single disc brake.

Front suspension: Type: Telescopic fork.
Rear suspension: Type: Swingarm.
Electrical system: System voltage: 12 V.
Battery: Model: GTZ8V Voltage, capacity: 12 V, 7.0 Ah (10 HR).

Bulb wattage: Headlight: LED.
Brake/tail light: LED.
Front turn signal light: LED.
Rear turn signal light: LED.
Auxiliary light: LED.
License plate light: 5.0 W.

Motorcycles blue book-Nada Motorcycles blue book.

2022-10-04T20:16:00.007+06:00

Welcome to the Yamaha world of motorcycling!

As the owner of the Model MT03-A, you are benefiting from Yamaha's vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability. Please take the time to read this manual thoroughly, so as to enjoy all advantages of your MTN320-A. The Owner's Manual does not only instruct you on how to operate, inspect, and maintain your motorcycle, but also on how to safeguard yourself and others from trouble and injury.

In addition, the many tips given in this manual will help keep your motorcycle in the best possible condition. If you have any further questions, do not hesitate to contact your Yamaha dealer. The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety first! Yamaha continually seeks advancements in product design and quality.

Yamaha mt03 right view

While this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your motorcycle and this manual. If there is any question concerning this manual, please consult a Yamaha dealer.

Yamaha mt3

Yamaha MT03

Safety information :

Be a Responsible Owner:

As the vehicle's owner, you are responsible for the safe and proper operation of your motorcycle.
Motorcycles are single-track vehicles. Their safe use and operation are dependent upon the use of proper riding techniques as well as the expertise of the operator. Every operator should know the following requirements before riding this motorcycle. He or she should:

Obtain thorough instructions from a competent source on all aspects of motorcycle operation.

Observe the warnings and maintenance requirements in this Owner's Manual.

Obtain qualified training in safe and proper riding techniques. Obtain professional technical service as indicated in this Owner's Manual and/or when made necessary by mechanical conditions.

Never operate a motorcycle without proper training or instruction. Take a training course. Beginners should receive training from a certified instructor. Contact an authorized motorcycle dealer to find out about the training courses nearest you.

Safe Riding:

Perform the pre-operation checks each time you use the vehicle to make sure it is in safe operating condition. Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage. See pages 4-1 for a list of pre-operation checks.

This motorcycle is designed to carry the operator and a passenger.

The failure of motorists to detect and recognize motorcycles in traffic is the predominant cause of automobile/motorcycle accidents. Many accidents have been caused by an automobile drivers who did not see the motorcycle. Making yourself conspicuous appears to be very effective in reducing the chance of this type of accident.

Therefore

Wear a brightly colored jacket.

Use extra caution when approaching and passing through intersections since intersections are the most likely places for motorcycle accidents.

Ride where other motorists can see you. Avoid riding in another motorist's blind spot.

Never maintain a motorcycle without proper knowledge. Contact an authorized motorcycle dealer to inform you about basic motorcycle maintenance. Certain maintenance can only be carried out by certified staff.

Motorcycles-price-in-Bangladesh

2022-08-22T22:47:00.007+06:00

Introduction:

Welcome to the Yamaha world of motorcycling!

As the owner of the FZS V3, FZS V2, R15, and Fazer v3, you are benefiting from Yamaha's vast experience and newest technology. Regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.

Discuss all types of motorcycle models and prices:

1. Yamaha R15 V3:

Yamaha R15 V3

Yamaha R15 V3 Price: 475000/-

Product Details:

Engine type: Liquid-cooled, 4-stroke, SOHC, 4-valve.
Displacement: 155 cc.
Bore & Stroke: 58.0 mm X 58.7 mm.
Compression ratio: 11.6:1.
Maximum power: 14.2kW (19.3PS).

2. Yamaha R15 V4:

Yamaha R15 V4

Yamaha R15 V4 Price: 555000/-

Engine type Liquid-cooled, 4-stroke, SOHC, 4-valve.
Displacement 155 CC.
Bore & stroke 58.0 mm × 58.7 mm.
Compression ratio 11.6: 1.
Maximum horsepower 13.5kW(18.4PS)/10000 RPM.

3. Yamaha MT-15:

Yamaha MT-15 Price: 430000/-

Product Details:

Engine type: Liquid-cooled, 4-stroke, SOHC, 4-valve.
Displacement: 155 cm3.
Bore & Stroke: 58.0 mm x 58.7 mm.
Compression ratio: 11.6: 1.
Maximum power: 14.2 kW (19.3 PS).
Performance: 6-Speed Transmission.
Braking System: Single ABS.
Kerb Weight: 138 kg.

4. Yamaha FZS FI V3 ABS:

Yamaha FZS FI V3 ABS

Yamaha FZS FI V3 ABS Price: 259500/-

Product Details:

Engine Type: Air Cooled.
Displacement: 149 cc.
Fuel Supply: Fuel Injection (FI).
Braking System: Single ABS.
Seat Height: 790 mm.
Kerb Weight: 137 kg.

5. Yamaha Saluto 125 CC:

Yamaha Saluto 125 CC

Yamaha Saluto 125 CC Price: 140000/-

Product Details:

Yamaha Saluto Disk Brake 125CC.
Engine type: Air cooled, 4-stroke, SOHC, 2-valve.
Displacement: 125cc.
Bore & Stroke: 52.4mm x 57.9mm.
Compression ratio: 10.0:1.
Maximum Horse Power: 6.1kW.
Fuel Tank: 7.6 Liters.
Tyre: Tubeless (Both).
Seat Height: 805mm.
Kerb: 113 kg.

Yamaha fzs v2-yamaha fzs v2 price in bangladesh 2022

2022-07-17T22:07:00.015+06:00

Welcome to the Yamaha world of motorcycling! As the proprietor of the Yamaha FZS- FIV3.0, you're serving from Yamaha's vast experience and newest technology regarding the do- subscribe and manufacture of high-quality products, which have earned Yamaha a character for responsibility. Please take the time to read this homemade completely, to enjoy all advantages of your Yamaha FZS- FIV3.0. The proprietor's Manual doesn't only instruct you in how to operate, check and maintain your motorcycle, but also in how to guard yourself and others from trouble and injury. In addition, the numerous tips given in this primer will help keep your motorcycle in the most stylish possible condition. However, don't vacillate to communicate with your Yamaha dealer, If you have further questions. The Yamaha platoon wishes you numerous safe and affable lifts. So, flashback to putting safety first! Yamaha continually seeks advancements in product design and quality. thus, while this primer contains the most current product information available at the time of printing, there may be minor disagreement between your motorcycle and this primer, If there's any question concerning this primer, please consult a Yamaha dealer.

yamaha fzs v3

Yamaha fzs v2 price in Bangladesh 2022
Price: 220000/-

Yamaha fzs v3 price: 249000/-

YAMAHA FZS FI V3 ABS

Product Details:

Engine:

Engine type Air-cooled, 4-stroke SOHC, 2-valve Displacement 149 cm3.

Bore and Stroke: 57.3mm x 57.9mm.

Compression ratio: 9.5:1

Maximum Horse Power: 9.7 kW (13.2PS) / 8,000 r/min.

Maximum torque: 12.8 N.m (1.3 kg f.m) / 6,000 r/min.

Starting system type: Electric Starter.

Cylinder arrangement: Single Cylinder.

Dimensions:

Overall length x width x height 1,990mm X 780mm X 1,080mm, Seat height 790 mm.

Wheelbase 1,330 mm Minimum ground clearance 165 mm.

Weight(with oil and a full fuel tank) 137 kg.

Chassis:

Frame type: Diamond.

Tubeless tyre size (Front): 100/80-17M/C 52P.

Tubeless tyre size (Rear): 140/60R17M/C 63P

Brake type (Front): Hydraulic single disk brake.

Brake type (Rear): Hydraulic single disk brake.

Lubrication system Wet sump Engine oil capacity 1.20 L

Technical Parameters:

Fuel tank capacity: 12.8 L.

Carburetor Type: Fuel supply, Fuel injection.

Clutch type: Wet, multi-disc.

Transmission type: Constant mesh, 5-speed.

Shift type: Return.

Ignition system type: TCI (Transistor controlled ignition).

Suspension type: (front/rear) Telescopic fork/Mono Shock Body Kit Semi Front Body Kit in Engine Cover.

Headlight: LED.

Auxiliary light: 12V, 5W x 1 Brake/ Tail light 12V,21/5W x 1 .

Turn signal light (Front and Rear) 12V, 10W x 2 Fuel gauge Digital

Clock: Digital.

Speedometer: Digital

Fuel consumption indicator: Equipped.

Yamaha fz v3 user manual pdf-Yamaha service policy

2022-03-18T17:20:00.002+06:00

Welcome to the Yamaha world of motorcycling! As the proprietor of the Yamaha FZS-FIV3, you're serving from Yamaha's vast experience and newest technology regarding the do- subscribe and manufacture of high-quality products, which have earned Yamaha a character for responsibility. Please take the time to read this home-made thoroughly, to enjoy all advantages of your Yamaha FZS-FI V2. The Proprietor's Manual doesn't only instruct you in how to operate, check and maintain your motorcycle, but also in how to guard yourself and others from trouble and injury. In addition, the numerous tips given in this primer will help keep your motorcycle in the most stylish possible condition.

However, don't vacillate to communicate with your Yamaha dealer, If you have any further questions. The Yamaha platoon wishes you numerous safe and affable lifts. So, remember to put safety first! Yamaha continually seeks advancements in product design and quality. Thus, while this primer contains the most current product information available at the time of printing, there may be minor disagreement between your motorcycle and this primer, If there's any question concerning this primer, please consult a Yamaha dealer.

Yamaha FZS-FIV3

Service Policy:

1. PDI Check: The customer must complete all the work through the PDI checklist and supply the motorbike. The signature of the customer has to be taken to the effect that PDI has been completed.

2. Registration: DMS registration has to be done correctly as per the rules because it is essential to have customer information online (DMS).

3. Importance of maintenance: To get the best service from your motorbike, maintenance is very important as per the rules of the owner's manual. Please read the owner's manual and follow the maintenance rules accordingly.

4. Free Schedule Service: There are 5 (five) free service coupons offered by ACI Motors in this book (where 4 coupons apply for the Saluto model). Free service coupons will be performed according to the maintenance schedule of the owner's manual. Free scheduled service must be received within a specified time, it will not be applicable after the specified time.

5. Paid Schedule Service: There are 3 (three) paid service coupons offered by ACI Motors in this book. Paid service coupons will be performed according to the maintenance schedule of the owner's manual. The customer will pay the charge for the paid service.

6. Other services: Other services and repairs can be done according to the customer's problem, in which case the service charge has to be paid at a fixed rate. Accept warranty-free and paid service schedules on time and ensure the safety of your valuable motorbike. Use octane, and avoid petrol. | Only Yamalur Halon Oil - is approved engine oil.

7. Schedule (Free and Paid) Services: Service and Paid Services are performed as per the guidelines of the Owners Manual. Dealer-wearing technicians will check every checkpoint as per the guidelines, and clean, adjust, change, repair, and oil as required. Also, be able to solve problems according to the customer's problem. Report any problem with your motorbike to the dealer service point.

8. Break-in period: Every motorbike provides the best service for a long time after the sale, i.e. after purchase, if certain rules are followed. So from the time of purchase of the motorbike to the next 1000-2000 km, do not raise the RPM of your favorite motorbike more than 4000-5000. Do not accelerate too fast and too often. Don't forget the speed. Do not carry an excessive load. This is because at this time the parts of different parts of the engine are sharp and need to be smooth. Follow the rules of the Owners Manual.

Yamaha fzs v2

The first 1000 kilometers are very important for your motorbike to give the best service for a long time.

9. Fuel: Be sure to use good quality octane. The only octane is the approved fuel for your motorbike. A mixture of octane and petrol or adulterated fuel can damage your motorbike or shorten its life by reducing performance and mileage. So use good quality octane as fuel.

10. Safety: Always wear a helmet. If you read the owner's manual then you will know about the safety of you and the motorbike. Obey traffic.

11. Genuine Spare Parts: Non - ACI Motors is not responsible for any damage caused by the use of genuine spare parts. Use of non-genuine spare parts may void the warranty. ACI does not guarantee the quality of non-genuine spare parts. So use genuine spare parts, and walk safely and safely.

12. Engine Oil: ACI Motors is not responsible for any damage caused by the use of unapproved or non-genuine engine oil. Rather, the use of unauthorized or non-genuine engine oil does not warrant a warranty. The ACI does not provide any assurances regarding the quality of non-approved or non-genuine engine oil. So use genuine Yamalob engine oil, and walk safely and safely.

13. Customer Responsibilities and Duties and Rights: Adhere to the break-in period, so that the best service will be available for a long time. The property is yours. You have the right to complete the PDI, complete the registration, and take delivery. Read the Owners' Manual carefully and be aware of safety and maintenance in that way. Schedule maintenance and other checkups as per rules. Use genuine spare parts and engine oil. Save the book here and present it at the time of taking service.

ACI Motors is committed to providing the best after-sales service for your Yamaha Motorbike and is working towards that goal. You can get all the benefits as per the rules of this book. If you have any valuable opinions, suggestions, complaints, and know more, you can let us know at this address- ACI Motors Limited, Service Department, Yamaha, ACI Center, 245 Tejgaon Industrial Area, Dhaka-1207, Bangladesh. Hotline number: 09606 or 16533

Yamaha fzs v2 price in Bangladesh 2022

2022-02-11T21:25:00.032+06:00

Introduction:

Congratulations on behalf of ACI Motors for purchasing a product of the Yamaha brand. You are now a proud owner of the world-famous Japanese motorbike brand Yamaha Motorbike. Your Yamaha motorbike has been designed and manufactured with the latest and latest technology and engineering. Yamaha Motor-bike Manufacturer is always committed to providing you with high-quality Motorbikes with the best after-sales service.1 With this service and warranty handbook you will be able to know the details about the service and warranty policy of your motorbike. As well as regular maintenance, your own safety is also discussed in this book.

I request you to read the whole book. Also, save the book and display the book while taking service and warranty service. Have a nice walk with the world-famous Yamaha family.

Yamaha FZS v2 price in Bangladesh:

Yamaha FZS V3 price details

Yamaha FZS v2

SPECIFICATION:

Engine Type: Air-cooled, 4-stroke, SOHC, 2-valve.

Displacement: 149cc.

Brake Type: Double disc.

Battery: 12V, 4.0AH (10H), Sealed type.

Fuel tank volume: 12L

FZS-fi-dark-night

Warranty policy:

Warranty of motorbikes supplied by ACI Motors Limited. Provided by ACI Motors Limited. In this case, some conditions apply. Details of the warranty are given below:

1. Authorized Dealer: Warranty of motorbikes sold only by an authorized dealer is provided. ACI Motors or its dealers are not obliged to provide any warranty or service for motorbikes sold by any party other than ACI Motors.

2. Warranty Registration: Only motorbikes sold by authorized dealers need to be registered online (DMS system) by properly filling up the warranty registration form in this book. Otherwise, warranty registration will not be completed. Note: The copy of ACI Motors along with the PDI copy of the warranty registration form should be sent to ACI Motors regularly. A dealer copy should be given to the dealer and a customer copy should be given to the customer along with this book.

3. Warranty Registration Cancellation: The warranty will be canceled or will not be accepted if any kind of abrasion, tearing, or failure to register properly.

4. Warranty period: The limited warranty period of your purchased motorbike is 01 (one) year or 12,000 kilometers (whichever comes first). Which will start from the date of purchase. The warranty period does not increase or decrease. With the change of ownership of the motorbike, the next customer can get the remaining warranty period service. To get the warranty, the customer must receive free scheduled service and paid services from the authorized dealer or service point at the specified time. In this case, the customer can apply for a warranty by following certain rules and displaying this book.

5. Reasons why the warranty is not applicable:

loss Any damage as a result of repairs in an unauthorized workshop.
Using non-genuine spare parts and unauthorized engine oil.
In case of any loss due to the customer's negligence or improper maintenance.
If used for commercial purposes or racing, in case of any damage due to an accident.
In case of any loss due to improper operation of the customer.
Customized, modified, and tampered with mechanical or electrical systems.
If you tamper with the auto meter or keep its cable open.
Warranty will not apply if free services and paid services are not properly received at dealer points or authorized service points as per proper rules.
No warranty for accessories is applicable. Warranty and free service without service and warranty handbook are not applicable.

For the above reasons, a warranty will not be applicable to your motorbike. To avoid the above tasks.

6. Warranty Claim Service: If any customer is entitled to a warranty, the service will be provided only through the repair or replacement of parts (whichever is applicable) to solve the problem. In this case, whatever will be applicable, such measures will be taken to solve the problem. In this case, the decision of the company concerned will be considered final.

7. Services that are not covered by warranty services: General repair, engine tune-up, de-carbonization, fuel system cleaning, Dhaka, brake, clutch, and other adjustments are not covered by warranty. Accidental repairs and any repairs to motorbikes that have expired warranty are not covered by the warranty. Any repairs related to the warranty claim are free, and a service charge will be charged for any other repairs or work.

8. Parts that are not covered by the warranty:

Parts that are damaged or do not work in normal use are not covered by the warranty, that is, the warranty cream does not apply to any damage to those parts. The following parts are Spark Plug, Air Filter, Oil Filter, Fuel Filter, Drive Chain & Socket, Brake Shoe & Pad, Brake Drum, Brake Disc, Clutch Plate, Friction Plate, Clutch Unit, Lights, Bulbs, Throttle Cable, Clutch Brake cable, Any other oil including electrical cables, fuses, relays, switches, batteries, rubber items, plastic items, drive belts, fans, gaskets, O-rings, race bearings, engine oil, fork oil, coolant, gear oil, any other oil. No warranty is given for any parts which may be damaged due to wear and tear or other wear and tear.

9. Warranty service: There is no service charge for any warranty-related service. Warranty parts are supplied free of charge after an inspection or the problem is solved by repair. (In this case, due to non-availability of parts stock or some time may be required for repair). In this case, the decision of the company concerned will be considered final.

Yamaha fzs v3 price in Bangladesh 2022

2022-01-14T19:50:00.005+06:00

Introduction:

Welcome to the Yamaha world of motorcycling! As the owner of the Yamaha FZS-FIV 3.0, you are benefiting from Yamaha's vast experience and newest technology regarding the do-sign and manufacture of high-quality products, which have earned Yamaha a reputation for dependability. Please take the time to read this manual thoroughly, to enjoy all advantages of your Yamaha FZS-FIV 3. The Owner's Manual does not only instruct you on how to operate, inspect and maintain your motorcycle, but also on how to safeguard yourself and others from trouble and injury. In addition, the many tips given in this manual will help keep your motorcycle in the best possible condition. If you have any further questions, do not hesitate to contact your Yamaha dealer. The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety first! Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your motorcycle and this manual, If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING Please read this manual carefully and completely before operating this motorcycle.

Yamaha FZS v3 price in Bangladesh 2022

Yamaha FZS v2 price details

Matt-Blue FZS V3

Engine Specifications :

Engine type: Air-cooled, 4-stroke SOHC, 2-valve.
Displacement: 149 cm3.
Bore and Stroke: 57.3mm x 57.9mm.
Compression ratio: 9.5:1.
Maximum Horse Power: 9.7 kW (13.2PS) / 8,000 r/min.
Maximum torque: 12.8 N.m (1.3 kg f.m) / 6,000 r/min.
Starting system type: Electric Starter.
Cylinder arrangement: Single Cylinder.

Grey-Cyan FZS

Dimensions:

Overall length x width x height: 1,990mm X 780mm X 1,080mm.
Seat height: 790 mm.
Wheelbase: 1,330 mm.
Minimum ground clearance: 165 mm.
Weight(with oil and a full fuel tank): 137 kg.

Chassis:

Frame Type: Diamond.
Tubeless tyre size (Front): 100/80-17M/C 52P.
Tubeless tyre size (Rear): 140/60R17M/C 63P.
Brake type (Front): Hydraulic single disk brake.
Brake type (Rear): Hydraulic single disk brake.
Lubrication system: Wet sump.
Engine oil capacity: 1.20 L.

Technical Parameters:

Fuel tank capacity: 12.8 L.
Carburetor type/ Fuel supply: Fuel injection.
Clutch type: Wet, multi-disc.
Transmission type: Constant-mesh, 5-speed.
Shift type: Return.
Ignition system type: TCI (Transistor controlled ignition).
Suspension type (front/rear): Telescopic fork/Mono Shock.
Body Kit: Semi Front Body Kit in Engine Cover.
Headlight: LED.
Auxiliary light: 12V, 5W x 1.
Brake/ Taillight: 12V,21/5W x 1.
Turn signal light(Front and Rear): 12V, 10W x 2.
Fuel gauge: Digital.
Clock: Digital.
Speedometer: Digital.
Fuel consumption indicator: Equipped.

FEATURES:

LED Headlight

Front 1ch ABS

Comfortable Two-Level Seat

Negative LCD Instrument Cluster

Important manual information:

Particularly important information is distinguished in this manual by the following notations:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

⚠ WARNING:

A Warning indicates a hazardous situation that, if not avoided, could result in death or serious injury.

NOTICE: A Notice indicates special precautions that must be taken to avoid damage to the vehicle or other property.

TIPS:

A TIP provides key information to make procedures easier or clearer.

"Product and specifications are subject to change without notice.

Matt-Black FZS V3

Yamaha FZS-FIV 3.0 OWNER'S MANUAL ©2019 by India Yamaha Motor Pvt. Ltd. 1st edition, November 2018 All rights reserved. Any reprinting or unauthorized use without the written permission of India Yamaha Motor Pvt. Ltd. is expressly prohibited. Printed in India.

Excavator price in bangladesh

2022-01-12T21:59:00.001+06:00

ACI Motors Limited ACI Motors provides the stylish result of quality ministry to your valued construction workshop. Presently, we're offering you the world's leading brands-KOBELCO, CASE, LOVOL, and ESCORTS. We also have gu effective service network all over Bangladesh to insure you stylish quality service in the shortest possible time which we consider our core commitment to our valued guests.

Lovol excavator

Features:

Operating weight: 8300 kg.
Engine brand: YANMAR of Japan.
Engine power: 81.5 horsepower @ 2200 rpm.
Hydraulic Pumps & Valves: German REXROTH.
Bucket size: 0.32 cubic meters.
Maximum excavation depth: 13.2 feet.
Maximum excavation height: 23.45 feet.
Swing system: Korea's EATON.
Max Digging Depth, mm: 4050.
Max Digging Height, mm: 7150.

Model FL956F-II

SPECIFICATIONS:

Model FL956F-II
Operating Weight (Kg): 16940.
Rated Load (Kg): 5000.
Bucket Capacity (M3): 3.00.
Engine Made: Weichai-STEYR.
Engine Power (Hp @ RPM): 220@2200.
Dimension (LxWxH) mm: 8080x2980x3410.
Wheel Base (mm): 3250.
Dump Height (450),mm: 3130.

ACI Motors Head Office Numbers:

+8801730028547 +8801708144593 +8801713052963

Regional Office Numbers:

Mymensingh, Kishorgonj, Comilla Region: +8801714163132, +8801730002503

Chittagong, Feni, Sylhet Region: +8801730028577, +8801730015816

Khulna, Jessore, Satkhira Region: +8801730024484, +8801730015804

Rajshahi, Rangpur, Dinajpur Region: +8801714163200, +8801730028572, +8801755582621, +8801714163183.

Combine harvester price in Bangladesh

2021-11-18T15:22:00.002+06:00

ACI Motors company is bringing various agricultural equipment to the farmers, which are given to the farmers of Bangladesh at very low prices and with government subsidies. 50% government subsidy in the general area and 70% in the haor area only. Due to this farmers can easily buy agricultural machinery. Therefore, in the development of agriculture in Bangladesh, the government of Bangladesh is trying to improve agriculture in a big way. To this end, ACI Motors is cooperating with various agricultural machinery farmers.

Yanmar Harvester Ag600

Special Features of Yanmar Harvester:

Automatic feeding depot system.
Can be handled very easily.
The eco-diesel engine rotates automatically.
Three drums and three fans complete the threshing system.
Selection can be adjusted.
Dust Delivery Controller.
Automatic wind volume can be controlled.
There are 6 special sensors or alarms.

General Features of Yanmar Harvester:

Yanmar diesel engine with 70 horsepower
There are 6 special sensors that prevent unwanted engine breakdown.
It takes one hour to harvest, thresh, thresh and pack one acre of paddy and wheat and it consumes 10 to 12 liters of fuel.
After harvesting the paddy remains whole.
The tank can hold up to 600 kg.
Suitable for both dry and muddy soils.
Assurance of full-time after-sales service spare parts and driver training.

Combine harvester prices in Bangladesh:

YANMAR Combine Harvester AG 600 is available with a government subsidy, the price at government subsidy:

1. Yanmar Combine Harvester Tank Type Smart Assist Remote (SAR) with 70% (for haor and coastal areas) subsidized at Tk. 11,40,000 and 50% subsidized at Tk. 17,00,000.

2. Yanmar Combine Harvester Bag Type Smart Assist Remote (SAR) with 70% subsidy (for haor and coastal areas) at Tk. 9,40,000 and 50% subsidy at Tk. 15,00,0

Headquarters of the ACI Motors Sales Team:

Panchagarh district, Phone number: 01704123943

Dinajpur district, Phone number: 01730024495

Nilphamari district, Phone number: 01730024390

Gaibandha district, Phone number: 01709656845

Lalmonirhat district, Phone number: 01719993081

joypurhat district, Phone number: 01709656885

Sirajganj district, Phone number: 01700767936

Nature district, Phone number: 01713053060

Naogaon district, Phone number: 01714173329

Chapai Nawabganj District, Phone number: 01713053261

Khulna district, Phone number: 01755534987

Chuadanga district, Phone number: 01730024256

Magura district, Phone number: 01713053312

Gopalganj District, Phone number: 01713053061

Barguna District, Phone number: 01704114201

Bhola District, Phone number: 01755582626

Sunamganj District, Phone number: 01730028461

Habiganj District, Phone number: 01700767950

Sherpur District, Phone number: 01713053288

Netrokona District, Phone number: 01700768046

Jamalpur District, Phone number: 01708467514

Munshiganj District, Phone number: 01708463006

Manikganj District, Phone number: 01700702211

Kishoreganj District, Phone number: 01714162185

Brahmanbaria District, Phone number: 01708463007

Chandpur District, Phone number: 01755582620

Feni District, Phone number: 01704114200

Noakhali District, Phone number: 01755608490

Smart Assist Remote System (SAR)

Benefits available:

Having GPS allows the machine to be tracked from anywhere.
How many hours the harvester has been running can be seen sitting at home.
Can be protected from theft.
The machine signals when it is time for periodic service.
Gives a signal in case of a sudden electrical problem.
Able to measure land size very easily.

Yanmar Harvester Ag600

Power tiller price list - power tiller price in November

2021-11-05T14:33:00.021+06:00

Introduction:

Bangladesh as a developing country has been making a significant contribution to the growth of agricultural machinery such as tractors, power tillers, harvesters, etc. The use of this machinery has modernized traditional farming and has also significantly increased agricultural crop production. Sonalika Tractor of ACI Motors is one of the partners in the country's progress. This handbook will discuss the proper management of the tractor business, expansion strategies, and proper maintenance of tractors. In addition, the handbook will provide ideas on how to plan a new business and how to determine the financial considerations of the business.

Power tiller R40

Power tiller price list-power tiller price in Bangladesh

S.N	Power tiller Model	Blades	Horse Power	Price
01.	Aci power tiller R40	40 Blades	28HP	295000/-(Changeable)
02.	Aci power tiller R28	28 Blades	25HP	237000/-(Changeable)

Power tiller R28

Power tiller R24

Changchai -DF

Power tiller R28

Yanmar YH700 Price in Bangladesh

2021-11-03T13:24:00.002+06:00

The solution to harvest more rice in less time is ACI Motors‌'s Yanmar Harvester YH700. Equipped with Smart Assist Remote System or SAR, the country's only steering wheel type harvester is the Yanmar YH700 which has the original Yanmar TNV engine which is fuel-efficient.

Yanmar YH700 Price in Bangladesh :

Total Price in bd 3600000/-
Normal area government subsidy of 50%
Only the Haor area government subsidy is 70%.

Good news for agricultural entrepreneurs. In the case of the purchase of YH700 Harvester in Yanmar. there is now a government subsidy of 15 lakh 50 thousand Tk. ( 21 lakh 60 thousand Tk in the Haor area).

With ACI Motors:

Free driver training.
1-year warranty and lifetime after-sales service.
Nationwide spare parts assurance.

Smart Assist Remote System (SAR)

Benefits available:

Having GPS allows the machine to be tracked from anywhere.
How many hours the harvester has been running can be seen sitting at home.
Can be protected from theft.
The machine signals when it is time for periodic service.
Gives a signal in case of a sudden electrical problem.
Able to measure land size very easily.

There is no comparison to the fast harvester whose name is Yanmar harvester YH700

Paddy/wheat of 1.26 acres of land harvested per hour.
The only steering wheel in the country is the type harvester.
Harvester with Smart Assist Remote System SAR.
Particularly suitable for working in mud lands.
The highest ground clearance is 420 (mm).

Corn cutting machine

Yanmar YH700 harvester. Corn can be easily harvested with this harvester. Maize can be harvested with this machine at a low cost to the farmer. You can also cut corn if you want. Yanmar YH700 harvester is available all over Bangladesh.

Corn cutting machine

power tiller new price in bd - aci agriculture products

2021-09-22T20:57:00.016+06:00

Power tiller price in bd

power tiller R40

Model Name: power tiller R40

Engine Model: ZS 1125 GN,
Engine Horse Power: 28 HP,
Tilling Blade: 40 Blades,
Rotary Transmission: Pinion type,
Headlight: Duel light,
Color: Red, Powder Coated Paint,
Iron Wheel: 10 Sprocket 20 Bit Iron Wheel with additional 12 mm rod binding
Seat: Spring-type Seat,
Radiator: 144 Pipe-based, Copper, made,
Additional Feature: Iron Wheel Carrier & Hydraulic Jack.

power tiller price in bd R40: ৳290,000 (Changeable).

Model Name: Classic

Model Name: Classic

Engine Model: S 195 NL GN
Engine Horse Power: 12 HP
Tilling Blade: 18 Blades
Radiator: 144 Pipe-based, Copper, made
Color: Green, Powder Coated Paint
Iron Wheel: 8 Sprocket 20 Bit Iron Wheel
Additional Feature: Iron Wheel Carrier

Power tiller price in bd.

power tiller R24

Model Name: power tiller R24

Engine Model: ZS 1110 GN
Engine Horse Power: 20 HP
Tilling Blade: 24 Blades
Color: Red, Powder Coated Paint
Iron Wheel: 10 Sprocket 20 Bit Iron Wheel with additional 12 mm rod binding
Seat: Spring-type Seat
Additional Feature: Iron Wheel Carrier

Power tiller price in bd:

power tiller R28

Model Name:power tiller R28

Engine Model: ZS 1115 GN
Engine Horse Power: 25 HP
Tilling Blade: 28 Blades
Rotary Transmission: Pinion type
Color: Red, Powder Coated Paint
Iron Wheel: 10 Sprocket 20 Bit Iron Wheel with additional 12 mm rod binding
Seat: Spring-type Seat
Radiator: 144 Pipe-based, Copper, made
Additional Feature: Iron Wheel Carrier & Hydraulic Jack

power tiller price in bd:৳235,000.(Changeable)

ACI Changchai

Model Name: DF 20 HP 24 Blade

Engine Model: Changchai S 1110 A2N
Engine Horse Power: 20 HP
Chassis: ACI Chassis
Tilling Blade: 24 Blades
Color: Blue

power tiller price in bd

ACI genuine parts