ldapsearch -x -H ldap://dc01.example.local \
  -D "user@example.local" -W \
  -b "dc=example,dc=local" -s base "(objectClass=*)" dn

ldap_bind: Strong(er) authentication required (8)
  additional info: 00002028: LdapErr: DSID-0C09xxxx, The server requires binds to turn on integrity checking if SSL\TLS are not already active on the connection

kinit user@EXAMPLE.LOCAL
ldapsearch -Y GSSAPI -H ldap://dc01.example.local -b "dc=example,dc=local" -s base dn

# 署名なしを強制して失敗するか確認（失敗すれば署名必須）
ldapsearch -Y GSSAPI -O "minssf=0,maxssf=0" -H ldap://dc01.example.local -b "dc=example,dc=local" -s base dn

# 証明書・TLSバージョンの確認
openssl s_client -connect dc01.example.local:636 -showcerts </dev/null

# LDAPSでbind
LDAPTLS_CACERT=/path/to/ca.pem \
ldapsearch -x -H ldaps://dc01.example.local \
  -D "user@example.local" -W -b "dc=example,dc=local" -s base dn

# StartTLS（389）
ldapsearch -x -ZZ -H ldap://dc01.example.local -D "user@example.local" -W -b "dc=example,dc=local" -s base dn

Add-Type -AssemblyName System.DirectoryServices.Protocols
$cred = Get-Credential   # user@example.local

# 389 + Simple bind（署名必須なら例外）
$c = New-Object System.DirectoryServices.Protocols.LdapConnection("dc01.example.local:389")
$c.SessionOptions.ProtocolVersion = 3
$c.AuthType = [System.DirectoryServices.Protocols.AuthType]::Basic
try { $c.Bind($cred.GetNetworkCredential()); "389 Simple bind: 成功（署名不要）" }
catch { "389 Simple bind: 失敗 -> $($_.Exception.InnerException.Message)" }

# 636 LDAPS
$s = New-Object System.DirectoryServices.Protocols.LdapConnection("dc01.example.local:636")
$s.SessionOptions.ProtocolVersion = 3
$s.SessionOptions.SecureSocketLayer = $true
$s.AuthType = [System.DirectoryServices.Protocols.AuthType]::Basic
try { $s.Bind($cred.GetNetworkCredential()); "LDAPS: 成功" }
catch { "LDAPS: 失敗 -> $($_.Exception.InnerException.Message)" }

Get-ItemProperty HKLM:\SYSTEM\CurrentControlSet\Services\LDAP -Name LDAPClientIntegrity
# 0=なし, 1=ネゴシエート(既定), 2=必須

pcuser@192.168.1.21に接続できませんでした
SSH 接続を確立できませんでした。ホストに到達可能であること、および SSH の設定が正しいことを確認してから、再試行してください。詳細なエラーは以下に表示されています。
Host denied (verification failed)

Get-Content "$env:LOCALAPPDATA\Packages\Claude_pzs8sxrjxfjjc\LocalCache\Roaming\Claude\ssh_configs.json"

Get-Content "$env:LOCALAPPDATA\Packages\Claude_pzs8sxrjxfjjc\LocalCache\Roaming\Claude\logs\ssh.log" -Tail 60

2026-08-11 22:28:06 [info] [ClaudeSSHManager] Initialized with version 5db5e4a12f88487e47c2c48259b69a2d630bb3f7
2026-08-11 22:28:08 [info] [RemoteServerController] Ensuring server is ready on pcuser@192.168.1.21 (trigger: warm_up)
2026-08-11 22:28:08 [info] [BinaryDeployment] Setting up remote server on pcuser@192.168.1.21
2026-08-11 22:28:08 [info] [SSH2Connection] Resolved pcuser@192.168.1.21 -> pcuser@192.168.1.21:22 (identityFiles: 0)
2026-08-11 22:28:08 [warn] [SSH2Connection] Host 192.168.1.21:22 is not in known_hosts
2026-08-11 22:28:08 [info] [SSH2Connection] Connecting to pcuser@192.168.1.21:22 (agent: none, keys: 1[ssh-ed25519], proxy: false, keyboard: true)
2026-08-11 22:28:08 [warn] [SSH2Connection] Rejecting host key for 192.168.1.21:22 — host is not in known_hosts
2026-08-11 22:28:08 [error] [SSH2Connection] Connection error: Host denied (verification failed)
2026-08-11 22:28:08 [error] [RemoteServerController] Connection failed (79ms, trigger: warm_up): Host denied (verification failed)
2026-08-11 22:28:11 [info] [RemoteServerController] Ensuring server is ready on pcuser@192.168.1.21 (trigger: send_message)
2026-08-11 22:28:11 [info] [BinaryDeployment] Setting up remote server on pcuser@192.168.1.21
2026-08-11 22:28:11 [info] [SSH2Connection] Resolved pcuser@192.168.1.21 -> pcuser@192.168.1.21:22 (identityFiles: 0)
2026-08-11 22:28:11 [warn] [SSH2Connection] Host 192.168.1.21:22 is not in known_hosts
2026-08-11 22:28:11 [info] [SSH2Connection] Connecting to pcuser@192.168.1.21:22 (agent: none, keys: 1[ssh-ed25519], proxy: false, keyboard: true)
2026-08-11 22:28:11 [warn] [SSH2Connection] Rejecting host key for 192.168.1.21:22 — host is not in known_hosts
2026-08-11 22:28:11 [error] [SSH2Connection] Connection error: Host denied (verification failed)
2026-08-11 22:28:11 [error] [RemoteServerController] Connection failed (46ms, trigger: send_message): Host denied (verification failed)
2026-08-11 22:28:19 [info] [RemoteServerController] Detaching (leaving daemon running)
2026-08-11 22:34:38 [info] [ClaudeSSHManager] Initialized with version 5db5e4a12f88487e47c2c48259b69a2d630bb3f7
2026-08-11 22:34:40 [info] [RemoteServerController] Ensuring server is ready on pcuser@192.168.1.21 (trigger: warm_up)
2026-08-11 22:34:40 [info] [BinaryDeployment] Setting up remote server on pcuser@192.168.1.21
2026-08-11 22:34:40 [info] [SSH2Connection] Resolved pcuser@192.168.1.21 -> pcuser@192.168.1.21:22 (identityFiles: 0)
2026-08-11 22:34:40 [warn] [SSH2Connection] Host 192.168.1.21:22 is not in known_hosts
2026-08-11 22:34:40 [info] [SSH2Connection] Connecting to pcuser@192.168.1.21:22 (agent: none, keys: 1[ssh-ed25519], proxy: false, keyboard: true)
2026-08-11 22:34:40 [warn] [SSH2Connection] Rejecting host key for 192.168.1.21:22 — host is not in known_hosts
2026-08-11 22:34:40 [error] [SSH2Connection] Connection error: Host denied (verification failed)
2026-08-11 22:34:40 [error] [RemoteServerController] Connection failed (109ms, trigger: warm_up): Host denied (verification failed)

"HOME       = $env:HOME"
"USERPROFILE= $env:USERPROFILE"
"HOMEDRIVE  = $env:HOMEDRIVE"
"HOMEPATH   = $env:HOMEPATH"

PS C:\Users\OSAKANATARO> "HOME       = $env:HOME"
HOME       =
PS C:\Users\OSAKANATARO> "USERPROFILE= $env:USERPROFILE"
USERPROFILE= C:\Users\OSAKANATARO
PS C:\Users\OSAKANATARO> "HOMEDRIVE  = $env:HOMEDRIVE"
HOMEDRIVE  = C:
PS C:\Users\OSAKANATARO> "HOMEPATH   = $env:HOMEPATH"
HOMEPATH   = \Users\OSAKANATARO
PS C:\Users\OSAKANATARO> 

PS C:\Users\OSAKANATARO> [Environment]::SetEnvironmentVariable("HOME", $env:USERPROFILE, "User")

PS C:\Users\OSAKANATARO> "HOME       = $env:HOME"
HOME       = C:\Users\OSAKANATARO
PS C:\Users\OSAKANATARO> "USERPROFILE= $env:USERPROFILE"
USERPROFILE= C:\Users\OSAKANATARO
PS C:\Users\OSAKANATARO> "HOMEDRIVE  = $env:HOMEDRIVE"
HOMEDRIVE  = C:
PS C:\Users\OSAKANATARO> "HOMEPATH   = $env:HOMEPATH"
HOMEPATH   = \Users\OSAKANATARO
PS C:\Users\OSAKANATARO>

PS C:\Users\OSAKANATARO> Get-WindowsCapability -Online -Name OpenSSH.Client*


Name         : OpenSSH.Client~~~~0.0.1.0
State        : NotPresent
DisplayName  : OpenSSH クライアント
Description  : OpenSSH ベースのセキュア シェル (SSH) クライアントで、セキュアなキー管理とリモート マシンへのアクセスを
               可能にします。
DownloadSize : 0
InstallSize  : 0



PS C:\Users\OSAKANATARO>

PS C:\Users\OSAKANATARO> Add-WindowsCapability -Online -Name OpenSSH.Client


Path          :
Online        : True
RestartNeeded : False



PS C:\Users\OSAKANATARO> Get-WindowsCapability -Online -Name OpenSSH.Client*


Name         : OpenSSH.Client~~~~0.0.1.0
State        : Installed
DisplayName  : OpenSSH クライアント
Description  : OpenSSH ベースのセキュア シェル (SSH) クライアントで、セキュアなキー管理とリモート マシンへのアクセスを
               可能にします。
DownloadSize : 0
InstallSize  : 7995927



PS C:\Users\OSAKANATARO>

PS C:\Users\OSAKANATARO> Get-Content "$env:LOCALAPPDATA\Packages\Claude_pzs8sxrjxfjjc\LocalCache\Roaming\Claude\logs\ssh.log" -Tail 30 -Encoding utf8
＜略＞
2026-08-11 23:20:24 [info] [RemoteServerController] Ensuring server is ready on pcuser@192.168.1.21 (trigger: send_message)
2026-08-11 23:20:24 [info] [BinaryDeployment] Setting up remote server on pcuser@192.168.1.21
2026-08-11 23:20:24 [info] [SSH2Connection] Resolved pcuser@192.168.1.21 -> pcuser@192.168.1.21:22 (identityFiles: 7)
2026-08-11 23:20:24 [info] [SSH2Connection] Connecting to pcuser@192.168.1.21:22 (agent: none, keys: 1[ssh-ed25519], proxy: false, keyboard: true)
2026-08-11 23:20:24 [info] [SSH2Connection] ssh2: Outbound: Sending SERVICE_REQUEST (ssh-userauth)
2026-08-11 23:20:24 [info] [SSH2Connection] ssh2: Inbound: Received SERVICE_ACCEPT (ssh-userauth)
2026-08-11 23:20:24 [info] [SSH2Connection] ssh2: Outbound: Sending USERAUTH_REQUEST (none)
2026-08-11 23:20:24 [info] [SSH2Connection] ssh2: Inbound: Received USERAUTH_FAILURE (publickey,password)
2026-08-11 23:20:24 [info] [SSH2Connection] ssh2: Client: none auth failed
2026-08-11 23:20:24 [info] [SSH2Connection] ssh2: Outbound: Sending USERAUTH_REQUEST (publickey -- check)
2026-08-11 23:20:24 [info] [SSH2Connection] ssh2: Inbound: Received USERAUTH_PK_OK
2026-08-11 23:20:24 [info] [SSH2Connection] ssh2: Outbound: Sending USERAUTH_REQUEST (publickey)
2026-08-11 23:20:25 [info] [SSH2Connection] ssh2: Inbound: Received USERAUTH_SUCCESS
2026-08-11 23:20:25 [info] [SSH2Connection] Connected to pcuser@192.168.1.21:22
2026-08-11 23:20:25 [info] [BinaryDeployment] Remote: home=/home/pcuser, platform=linux-amd64, shell=posix, localVer=5db5e4a12f88487e47c2c48259b69a2d630bb3f7
2026-08-11 23:20:25 [info] [BinaryDeployment] Server binary up to date (5db5e4a12f88487e47c2c48259b69a2d630bb3f7), skipping upload
2026-08-11 23:20:25 [info] [BinaryDeployment] CLI v2.1.222 cached
2026-08-11 23:20:26 [info] [BinaryDeployment] Remote server started
2026-08-11 23:20:26 [info] [BinaryDeployment] Bridge channel opened
2026-08-11 23:20:26 [info] [RemoteServerController] server capabilities: version=5db5e4a12f88487e47c2c48259b69a2d630bb3f7, methods=19, features=[process.stdin.offset]
2026-08-11 23:20:26 [info] [RemoteServerController] Connected to remote server (1557ms, trigger: send_message, reused: false)
PS C:\Users\OSAKANATARO>

pcuser@ubuntu:~$ sudo mokutil --sb-state
SecureBoot enabled
pcuser@ubuntu:~$

[pcuser@almalinux9 ~]$ sudo mokutil --sb-state
SecureBoot disabled
Platform is in Setup Mode
[pcuser@almalinux9 ~]$

pcuser@ubuntu:~$ sudo mokutil --db
[key 1]
SHA1 Fingerprint: 13:7e:57:1f:0b:81:8a:0f:5c:32:3d:a2:7f:4a:ec:cf:95:98:0c:96
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            e9:d9:ff:69:e6:f3:e7:e4
        Signature Algorithm: sha256WithRSAEncryption
        Issuer: C=US, ST=California, L=Palo Alto, O=VMware, Inc.
        Validity
            Not Before: Oct 16 17:16:05 2008 GMT
            Not After : Dec 31 17:16:05 2019 GMT
        Subject: C=US, ST=California, L=Palo Alto, O=VMware, Inc.
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:c5:65:a7:45:cf:67:7f:f3:15:2e:79:0e:7f:53:
                    bb:cc:76:27:96:b7:6a:fa:08:93:b2:ac:84:74:59:
                    dc:3f:17:57:6d:e5:05:4d:fe:e5:b9:bc:1d:0f:ab:
                    80:81:0b:a4:bf:fc:64:c8:fe:54:46:4b:5d:93:ff:
                    ef:30:88:bf:3c:6c:25:0a:ef:12:6f:46:b6:dc:2e:
                    e6:a3:da:71:f0:80:e5:a3:21:22:fa:48:35:8b:5f:
                    66:29:cf:b9:1b:73:a2:8a:fe:29:52:cd:a5:e1:d4:
                    d7:f6:f0:b6:17:84:19:43:8f:8c:96:3a:f4:4d:67:
                    4b:48:b4:31:13:9c:c6:4c:8f:e4:83:44:a2:50:0a:
                    a4:75:b3:9f:c9:b0:b9:0c:9f:eb:bc:c7:c7:8b:34:
                    2d:9a:25:e9:81:98:a2:3c:da:2a:a5:8f:d1:7f:f6:
                    e5:11:14:3f:06:89:14:1f:04:8a:1c:ed:05:7f:3d:
                    b9:e7:dd:11:84:05:b0:3b:90:b8:9f:d4:18:05:0c:
                    5e:54:51:b4:de:4e:a5:ad:04:f4:3b:8b:0b:85:46:
                    88:5d:a1:94:12:86:d4:f1:53:1c:ab:c9:e4:df:a2:
                    6d:af:e0:9c:95:3c:75:c6:21:18:79:f6:2c:b0:f6:
                    ba:dc:a8:b3:5d:b8:b4:7a:40:7f:e6:c4:02:b0:5a:
                    13:7f
                Exponent: 3 (0x3)
        X509v3 extensions:
            X509v3 Subject Key Identifier:
                4A:D8:BA:04:72:07:3D:28:12:77:06:DD:C6:CC:B9:05:04:41:BB:C7
            X509v3 Authority Key Identifier:
                keyid:4A:D8:BA:04:72:07:3D:28:12:77:06:DD:C6:CC:B9:05:04:41:BB:C7
                DirName:/C=US/ST=California/L=Palo Alto/O=VMware, Inc.
                serial:E9:D9:FF:69:E6:F3:E7:E4
            X509v3 Basic Constraints:
                CA:TRUE
    Signature Algorithm: sha256WithRSAEncryption
    Signature Value:
        70:ef:b4:2e:c4:c4:ae:66:d8:18:20:27:1c:0c:8d:0d:4f:9e:
        93:b3:e7:f4:e5:95:6f:6c:09:45:79:16:27:20:c3:9d:94:3f:
        b0:db:c0:e7:b7:45:92:a7:4b:49:a7:43:8b:94:0b:59:c7:de:
        18:65:31:84:75:53:c0:35:bc:16:0b:2b:93:9b:d5:fb:52:52:
        a0:59:08:3c:37:a4:f5:01:51:f8:3f:bd:62:7b:35:25:ec:c6:
        bb:b5:21:9d:a2:17:5d:80:8a:0d:fc:1b:4c:87:53:83:63:b4:
        0b:d5:49:93:0d:69:f6:72:33:ec:da:ee:c8:39:8d:ac:8f:6a:
        be:80:33:b8:e1:68:e3:44:0a:66:03:75:45:ca:ca:2a:e0:10:
        ee:52:06:45:32:ca:1b:67:b7:d0:24:bc:9b:be:a2:91:59:0c:
        0a:7e:34:2a:26:4f:a5:80:15:b9:d3:47:23:cd:0b:c3:4b:c9:
        94:f8:43:d1:6f:87:48:39:ba:de:ef:16:82:13:cb:4d:0a:3f:
        05:c1:a1:be:64:7f:b2:54:d4:73:96:7d:85:a6:7a:c5:ee:d3:
        51:4c:4e:3c:77:bc:df:40:1b:49:62:60:70:f8:08:0b:dd:32:
        28:eb:d1:5b:57:08:2e:00:a8:c0:5b:21:35:71:28:36:43:3a:
        97:e9:6c:a3

[key 2]
SHA1 Fingerprint: 73:8a:96:2b:d9:c8:1b:72:77:17:af:17:ee:09:3f:e9:b4:ba:ee:c0
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            e3:4c:a7:5a:0a:61:58:53
        Signature Algorithm: sha256WithRSAEncryption
        Issuer: C=US, ST=California, L=Palo Alto, O=VMware, Inc., CN=VMware Secure Boot Signing
        Validity
            Not Before: Oct 24 06:47:59 2017 GMT
            Not After : Oct 19 06:47:59 2037 GMT
        Subject: C=US, ST=California, L=Palo Alto, O=VMware, Inc., CN=VMware Secure Boot Signing
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
＜略＞

pcuser@ubuntu:~$ sudo mokutil --db|grep -e 'Subject:' -e 'Not After'
            Not After : Dec 31 17:16:05 2019 GMT
        Subject: C=US, ST=California, L=Palo Alto, O=VMware, Inc.
            Not After : Oct 19 06:47:59 2037 GMT
        Subject: C=US, ST=California, L=Palo Alto, O=VMware, Inc., CN=VMware Secure Boot Signing
            Not After : Jun 27 21:32:45 2026 GMT
        Subject: C=US, ST=Washington, L=Redmond, O=Microsoft Corporation, CN=Microsoft Corporation UEFI CA 2011
            Not After : Oct 19 18:51:42 2026 GMT
        Subject: C=US, ST=Washington, L=Redmond, O=Microsoft Corporation, CN=Microsoft Windows Production PCA 2011
            Not After : Jun 13 19:08:29 2035 GMT
        Subject: C=US, O=Microsoft Corporation, CN=Windows UEFI CA 2023
            Not After : Jun 13 19:31:47 2038 GMT
        Subject: C=US, O=Microsoft Corporation, CN=Microsoft UEFI CA 2023
pcuser@ubuntu:~$

pcuser@ubuntu:~$ sudo mokutil --kek
[key 1]
SHA1 Fingerprint: 45:9a:b6:fb:5e:28:4d:27:2d:5e:3e:6a:bc:8e:d6:63:82:9d:63:2b
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            33:00:00:00:13:14:16:b8:61:6d:82:82:4b:00:00:00:00:00:13
        Signature Algorithm: sha256WithRSAEncryption
        Issuer: C=US, O=Microsoft Corporation, CN=Microsoft RSA Devices Root CA 2021
        Validity
            Not Before: Mar  2 20:21:35 2023 GMT
            Not After : Mar  2 20:31:35 2038 GMT
        Subject: C=US, O=Microsoft Corporation, CN=Microsoft Corporation KEK 2K CA 2023
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:e3:5e:88:8b:73:2c:c3:0a:c4:e9:f5:ce:81:2d:
                    f1:0f:f1:26:35:37:d1:49:53:71:b1:5b:93:52:af:
                    e1:15:df:de:8b:39:bd:af:4c:65:75:53:e5:da:0a:
                    32:98:2f:33:26:b6:2b:be:94:99:9f:ec:da:c2:8e:
                    05:34:92:13:0f:63:bf:74:a2:72:a8:29:7e:9f:32:
                    21:29:08:59:c4:77:c4:2a:92:4c:87:b6:03:37:eb:
                    9a:e2:c3:c9:b4:48:21:c3:61:94:ea:17:51:b1:e7:
                    14:e2:24:63:2e:d5:f2:c6:a5:f2:a2:5e:1f:69:c6:
                    51:0d:a7:29:fb:52:0a:9b:e3:88:e8:68:ff:bb:fa:
                    92:69:af:c4:16:ff:5d:e5:5f:e0:df:ec:66:55:0b:
                    61:c2:ac:3b:20:6e:df:b4:0d:eb:2b:c8:d0:c2:34:
                    4e:82:96:39:ee:f1:31:85:04:3d:ef:d6:76:fb:c3:
                    ca:c1:d5:8c:2f:0b:10:28:9b:48:9a:b0:10:14:a4:
                    d9:94:e5:68:5b:cd:6e:e7:7a:ec:bc:a0:49:b8:a9:
                    53:d8:4d:2f:b2:7b:c8:da:bc:b2:e7:fc:ab:70:10:
                    77:95:45:49:fd:ad:d2:3f:17:cb:66:9a:f2:7d:36:
                    dd:0a:2c:e2:c0:87:21:2d:93:db:08:96:d2:e8:5c:
                    54:e1
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Key Usage: critical
                Digital Signature, Certificate Sign, CRL Sign
            1.3.6.1.4.1.311.21.1:
                ...
            X509v3 Subject Key Identifier:
                E0:AB:72:BC:96:3E:FF:B8:66:9B:7D:10:5A:43:3E:5C:42:54:87:5F
            1.3.6.1.4.1.311.20.2:
                .
.S.u.b.C.A
            X509v3 Basic Constraints: critical
                CA:TRUE
            X509v3 Authority Key Identifier:
                84:44:86:06:00:98:3F:2C:AA:B3:C5:89:F3:AC:2E:C9:E6:9D:09:03
            X509v3 CRL Distribution Points:
                Full Name:
                  URI:http://www.microsoft.com/pkiops/crl/Microsoft%20RSA%20Devices%20Root%20CA%202021.crl
            Authority Information Access:
                CA Issuers - URI:http://www.microsoft.com/pkiops/certs/Microsoft%20RSA%20Devices%20Root%20CA%202021.crt
    Signature Algorithm: sha256WithRSAEncryption
    Signature Value:
        85:02:06:12:fa:67:ae:4f:39:a9:b8:34:dc:5d:2a:78:19:7b:
        38:ee:9c:82:8f:1b:e2:3c:3d:32:0a:5e:bf:58:06:e7:6f:f8:
        8d:18:a8:1b:84:f5:9b:ca:ad:8b:08:44:0e:26:8d:2c:d8:5f:
        6e:23:25:07:fa:5b:4c:26:2e:76:31:43:2e:6e:e8:c8:31:c1:
        4a:d2:f2:02:b7:a6:f1:75:e4:96:ed:06:e2:ca:95:78:44:a8:
        33:76:d4:2b:4d:d7:bc:dc:87:3b:ab:4d:29:ad:96:89:b7:d5:
        c2:8f:ab:46:c3:5d:b3:fd:ed:a5:9e:f5:76:b7:2b:85:ff:98:
        a1:9f:6b:1c:9b:3e:f7:ee:0e:17:a3:fd:36:2f:e1:cd:28:98:
        1c:40:99:26:ca:03:8d:a6:35:ea:d2:0a:a7:8b:16:ae:21:01:
        00:1e:27:0f:b7:0e:b2:42:31:56:2e:e6:f8:8e:ea:0c:34:f0:
        4e:df:70:30:69:04:d1:cf:d3:9c:64:46:6f:cc:21:cd:cb:ef:
        05:32:bb:08:a6:d8:9f:45:38:5d:4e:d2:9c:92:89:e9:73:e4:
        7a:08:35:1e:4f:a6:c2:ba:6b:3e:b7:1f:54:34:49:fa:b4:7a:
        cb:da:a0:1f:59:81:2b:2a:f6:88:26:b0:fa:6c:f2:eb:c1:d8:
        ae:41:e1:6f:fc:bf:13:e8:6e:14:e7:e7:c7:03:8b:40:99:10:
        38:06:6d:70:bd:01:c8:de:8d:56:1d:38:0f:4f:23:a8:25:40:
        de:bb:28:2d:43:af:a4:bc:20:83:b5:06:f9:05:21:9f:3b:b9:
        79:0d:70:6b:53:c0:75:c2:1b:10:13:b3:e4:6f:09:a8:cf:d1:
        b7:0e:71:5c:b7:c9:8f:e5:1c:f0:13:55:d9:93:b9:ae:5d:3f:
        ca:0b:b0:59:6a:45:4a:c3:e1:e3:27:78:0d:16:81:fc:58:2d:
        b1:41:ba:18:0d:cf:f0:ef:ab:08:1e:4f:f8:fc:c6:fd:4b:dd:
        1d:ef:30:25:50:39:a3:df:fe:3f:b9:fa:eb:96:97:d0:cd:f9:
        04:26:fb:0d:48:19:08:d8:e1:93:c1:50:c7:6e:6d:d8:d0:6b:
        8e:95:72:64:50:c9:ed:55:89:6e:c1:4b:a2:06:d4:32:b5:a9:
        6d:65:01:7a:f1:52:57:18:05:30:5c:b8:28:66:11:b7:7a:f0:
        71:4e:86:61:60:7a:6d:56:c7:5b:09:3e:a2:ef:d4:0e:9e:92:
        d3:1f:99:f6:9d:b1:1d:78:78:6b:ff:e8:2a:04:af:78:67:3e:
        f0:2a:0b:a7:e0:5d:01:e9:87:99:35:30:90:ed:d7:45:6b:9c:
        cc:e6:a2:e4:e6:17:a7:dd

[key 2]
SHA1 Fingerprint: 31:59:0b:fd:89:c9:d7:4e:d0:87:df:ac:66:33:4b:39:31:25:4b:30
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            61:0a:d1:88:00:00:00:00:00:03
        Signature Algorithm: sha256WithRSAEncryption
        Issuer: C=US, ST=Washington, L=Redmond, O=Microsoft Corporation, CN=Microsoft Corporation Third Party Marketplace Root
        Validity
            Not Before: Jun 24 20:41:29 2011 GMT
            Not After : Jun 24 20:51:29 2026 GMT
        Subject: C=US, ST=Washington, L=Redmond, O=Microsoft Corporation, CN=Microsoft Corporation KEK CA 2011
        Subject Public Key Info:
＜略＞

pcuser@ubuntu:~$ sudo mokutil --kek|grep -e 'Subject:' -e 'Not After'
            Not After : Mar  2 20:31:35 2038 GMT
        Subject: C=US, O=Microsoft Corporation, CN=Microsoft Corporation KEK 2K CA 2023
            Not After : Jun 24 20:51:29 2026 GMT
        Subject: C=US, ST=Washington, L=Redmond, O=Microsoft Corporation, CN=Microsoft Corporation KEK CA 2011
pcuser@ubuntu:~$

pcuser@ubuntu:~$ sudo mokutil --dbx
[key 1]
  [sha256]
  80b4d96931bf0d02fd91a61e19d14f1da452e66db2408ca8604d411f92659f0a
  f52f83a3fa9cfbd6920f722824dbe4034534d25b8507246b3b957dac6e1bce7a
＜略＞
  13a1f37bedfb5417b6b737e2a3816c8fd587d74d836914b2b2edc9fd6ca30e58

[key 2]
SHA1 Fingerprint: 8d:a5:a1:98:f2:e8:b2:7d:0d:51:d0:b4:d7:34:21:52:5b:a8:df:5d
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number: 2806418927 (0xa7468def)
        Signature Algorithm: sha256WithRSAEncryption
        Issuer: CN=Debian Secure Boot CA
        Validity
            Not Before: Aug 16 18:22:50 2016 GMT
            Not After : Aug 16 18:22:50 2026 GMT
        Subject: CN=Debian Secure Boot Signer
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:d3:d1:83:90:0f:da:65:a2:2f:07:5a:60:95:eb:
                    f7:c7:86:7c:20:86:da:65:a3:a6:12:eb:5b:3b:ce:
                    c8:fb:3f:a1:72:4b:9e:df:50:c5:03:33:a4:0c:2b:
                    5f:d6:41:04:0d:b6:cf:95:48:ed:8a:b2:ad:d6:e5:
                    01:37:4e:60:cd:b2:4a:38:04:b3:44:80:94:af:9f:
                    6e:54:db:a8:1f:3c:b7:4b:30:de:21:81:6f:09:a3:
                    66:ba:6a:2b:96:d6:9a:61:77:0c:d4:ed:3c:d0:71:
                    bb:ad:8c:f0:22:5c:3e:25:cc:6d:22:2e:61:97:95:
                    af:9b:2e:4d:58:b6:7e:78:02:c3:0e:b9:fa:b2:5b:
                    27:de:7d:a2:be:0c:14:ac:73:ec:97:b0:15:5e:ed:
                    ed:e5:a5:75:3f:78:e0:71:ce:2f:ce:83:ed:53:31:
                    30:98:4e:e6:f9:01:a2:88:88:a6:23:08:7c:0d:b7:
                    54:3a:16:95:ed:5e:79:5e:90:4e:fe:cd:aa:de:82:
                    fc:f6:96:71:4e:49:49:b9:d3:e9:b0:ab:7f:d7:2a:
                    47:b7:53:30:27:7c:dc:66:98:09:6f:d1:7e:f5:7f:
                    3d:3e:d4:a2:6a:88:59:02:2f:2f:3d:c8:c6:28:de:
                    42:fe:d9:52:3d:24:c2:fc:40:98:11:f6:76:bf:8c:
                    bb:65
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            Netscape Cert Type:
                Object Signing
            X509v3 Extended Key Usage:
                Microsoft Trust List Signing
            X509v3 Key Usage:
                Digital Signature
    Signature Algorithm: sha256WithRSAEncryption
＜略＞

pcuser@ubuntu:~$ sudo fwupdtool get-updates
ロード中…                [************************************** ]
WARNING: UEFI capsule updates not available or enabled in firmware setup
See https://github.com/fwupd/fwupd/wiki/PluginFlag:capsules-unsupported for more information.
Devices with no available firmware updates:
 ~ UEFI dbx
No updates available for remaining devices
pcuser@ubuntu:~$

pcuser@ubuntu:~$ sudo fwupdtool refresh
ロード中…                [************************************** ]
WARNING: UEFI capsule updates not available or enabled in firmware setup
See https://github.com/fwupd/fwupd/wiki/PluginFlag:capsules-unsupported for more information.
Metadata is up to date; use --force to refresh again.
pcuser@ubuntu:~$

[root@esxi:~] esxcli nvme device list
HBA Name  Status  Signature
--------  ------  ---------
vmhba1    Online  nvmeMgmt-nvmhba0
vmhba0    Online  nvmeMgmt-nvmhba1
[root@esxi:~]

[root@esxi:~] esxcli nvme device log smart get -A vmhba0
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 318 K
   Available Spare: 100 %
   Available Spare Threshold: 10 %
   Percentage Used: 0 %
   Data Units Read: 0x281ea0
   Data Units Written: 0x27e613
   Host Read Commands: 0x145c04f
   Host Write Commands: 0x161ca45
   Controller Busy Time: 0xa37
   Power Cycles: 0xb4
   Power On Hours: 0x608
   Unsafe Shutdowns: 0xf
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x0
   Warning Composite Temperature Time: 12 Mins
   Critical Composite Temperature Time: 1001 Mins
   Temperature Sensor 1: 0 K
   Temperature Sensor 2: 0 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~]

[root@esxi:~] esxcli nvme device log smart get -A vmhba1
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 316 K
   Available Spare: 100 %
   Available Spare Threshold: 1 %
   Percentage Used: 1 %
   Data Units Read: 0x1c706ba
   Data Units Written: 0x2fd6fe3
   Host Read Commands: 0x21811d5a
   Host Write Commands: 0x2509be1b
   Controller Busy Time: 0x891
   Power Cycles: 0xc7
   Power On Hours: 0x6db
   Unsafe Shutdowns: 0x14
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x1
   Warning Composite Temperature Time: 3522 Mins
   Critical Composite Temperature Time: 1912 Mins
   Temperature Sensor 1: 316 K
   Temperature Sensor 2: 308 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~]

[root@esxi:~] esxcli storage core device list
t10.NVMe____TWSC_TSC1BN2562DF7T10A___________________0000000000010000
   Display Name: Local NVMe Disk (t10.NVMe____TWSC_TSC1BN2562DF7T10A___________________0000000000010000)
   Has Settable Display Name: true
   Size: 244198
   Device Type: Direct-Access
   Multipath Plugin: HPP
   Devfs Path: /vmfs/devices/disks/t10.NVMe____TWSC_TSC1BN2562DF7T10A___________________0000000000010000
   Vendor: NVMe
   Model: TWSC TSC1BN256-F7T10A
   Revision: T1103N0L
   SCSI Level: 0
   Is Pseudo: false
   Status: on
   Is RDM Capable: false
   Is Local: true
   Is Removable: false
   Is SSD: true
   Is VVOL PE: false
   Is Offline: false
   Is Perennially Reserved: false
   Queue Full Sample Size: 0
   Queue Full Threshold: 0
   Thin Provisioning Status: no
   Attached Filters:
   VAAI Status: unsupported
   Other UIDs: vml.05382b44a545e29308c99c2e0ef990edeaa5ba7d16ef3c2ae03a9befc3814afd0d
   Is Shared Clusterwide: false
   Is SAS: false
   Is USB: false
   Is Boot Device: true
   Device Max Queue Depth: 255
   No of outstanding IOs with competing worlds: 32
   Drive Type: physical
   RAID Level: NA
   Number of Physical Drives: 1
   Protection Enabled: false
   PI Activated: false
   PI Type: 0
   PI Protection Mask: NO PROTECTION
   Supported Guard Types: NO GUARD SUPPORT
   DIX Enabled: false
   DIX Guard Type: NO GUARD SUPPORT
   Emulated DIX/DIF Enabled: false

t10.NVMe____SPD_SP7002D2TNGH_________________________0200000000000000
   Display Name: Local NVMe Disk (t10.NVMe____SPD_SP7002D2TNGH_________________________0200000000000000)
   Has Settable Display Name: true
   Size: 1953514
   Device Type: Direct-Access
   Multipath Plugin: HPP
   Devfs Path: /vmfs/devices/disks/t10.NVMe____SPD_SP7002D2TNGH_________________________0200000000000000
   Vendor: NVMe
   Model: SPD SP700-2TNGH
   Revision: SP02203A
   SCSI Level: 0
   Is Pseudo: false
   Status: on
   Is RDM Capable: false
   Is Local: true
   Is Removable: false
   Is SSD: true
   Is VVOL PE: false
   Is Offline: false
   Is Perennially Reserved: false
   Queue Full Sample Size: 0
   Queue Full Threshold: 0
   Thin Provisioning Status: no
   Attached Filters:
   VAAI Status: unsupported
   Other UIDs: vml.05c56298c6cae09f64ef49957d1d7af93c98b2a5792c87d191b47f87ea5b89f9e2
   Is Shared Clusterwide: false
   Is SAS: false
   Is USB: false
   Is Boot Device: false
   Device Max Queue Depth: 1023
   No of outstanding IOs with competing worlds: 32
   Drive Type: physical
   RAID Level: NA
   Number of Physical Drives: 1
   Protection Enabled: false
   PI Activated: false
   PI Type: 0
   PI Protection Mask: NO PROTECTION
   Supported Guard Types: NO GUARD SUPPORT
   DIX Enabled: false
   DIX Guard Type: NO GUARD SUPPORT
   Emulated DIX/DIF Enabled: false
[root@esxi:~]

[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____TWSC_TSC1BN256
2DF7T10A___________________0000000000010000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1544   N/A        N/A    N/A
Power Cycle Count         180    N/A        N/A    N/A
Reallocated Sector Count  0      90         N/A    N/A
Drive Temperature         43     83         N/A    N/A
[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____SPD_SP7002D2TN
GH_________________________0200000000000000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1755   N/A        N/A    N/A
Power Cycle Count         199    N/A        N/A    N/A
Reallocated Sector Count  0      99         N/A    N/A
Drive Temperature         43     90         N/A    N/A
[root@esxi:~]

[root@esxi:~] esxcli nvme device log smart get -A vmhba0
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 324 K
   Available Spare: 100 %
   Available Spare Threshold: 10 %
   Percentage Used: 0 %
   Data Units Read: 0x281fc3
   Data Units Written: 0x27e69c
   Host Read Commands: 0x145f45c
   Host Write Commands: 0x16201bc
   Controller Busy Time: 0xa38
   Power Cycles: 0xb4
   Power On Hours: 0x60a
   Unsafe Shutdowns: 0xf
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x0
   Warning Composite Temperature Time: 12 Mins
   Critical Composite Temperature Time: 1001 Mins
   Temperature Sensor 1: 0 K
   Temperature Sensor 2: 0 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____TWSC_TSC1BN256
2DF7T10A___________________0000000000010000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1546   N/A        N/A    N/A
Power Cycle Count         180    N/A        N/A    N/A
Reallocated Sector Count  0      90         N/A    N/A
Drive Temperature         52     83         N/A    N/A
[root@esxi:~] esxcli nvme device log smart get -A vmhba1
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 317 K
   Available Spare: 100 %
   Available Spare Threshold: 1 %
   Percentage Used: 1 %
   Data Units Read: 0x1c71334
   Data Units Written: 0x2fd767a
   Host Read Commands: 0x2181e209
   Host Write Commands: 0x250ab10d
   Controller Busy Time: 0x891
   Power Cycles: 0xc7
   Power On Hours: 0x6dd
   Unsafe Shutdowns: 0x14
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x1
   Warning Composite Temperature Time: 3522 Mins
   Critical Composite Temperature Time: 1912 Mins
   Temperature Sensor 1: 317 K
   Temperature Sensor 2: 319 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____SPD_SP7002D2TN
GH_________________________0200000000000000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1757   N/A        N/A    N/A
Power Cycle Count         199    N/A        N/A    N/A
Reallocated Sector Count  0      99         N/A    N/A
Drive Temperature         44     90         N/A    N/A
[root@esxi:~]

[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____TWSC_TSC1BN256
2DF7T10A___________________0000000000010000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1547   N/A        N/A    N/A
Power Cycle Count         180    N/A        N/A    N/A
Reallocated Sector Count  0      90         N/A    N/A
Drive Temperature         54     83         N/A    N/A
[root@esxi:~] esxcli nvme device log smart get -A vmhba0
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 327 K
   Available Spare: 100 %
   Available Spare Threshold: 10 %
   Percentage Used: 0 %
   Data Units Read: 0x2820c9
   Data Units Written: 0x27e737
   Host Read Commands: 0x1461a66
   Host Write Commands: 0x1622f01
   Controller Busy Time: 0xa39
   Power Cycles: 0xb4
   Power On Hours: 0x60b
   Unsafe Shutdowns: 0xf
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x0
   Warning Composite Temperature Time: 12 Mins
   Critical Composite Temperature Time: 1001 Mins
   Temperature Sensor 1: 0 K
   Temperature Sensor 2: 0 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____TWSC_TSC1BN256
2DF7T10A___________________0000000000010000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1547   N/A        N/A    N/A
Power Cycle Count         180    N/A        N/A    N/A
Reallocated Sector Count  0      90         N/A    N/A
Drive Temperature         54     83         N/A    N/A
[root@esxi:~] esxcli nvme device log smart get -A vmhba1
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 320 K
   Available Spare: 100 %
   Available Spare Threshold: 1 %
   Percentage Used: 1 %
   Data Units Read: 0x1c78f10
   Data Units Written: 0x30203c4
   Host Read Commands: 0x218425aa
   Host Write Commands: 0x2519b431
   Controller Busy Time: 0x892
   Power Cycles: 0xc7
   Power On Hours: 0x6df
   Unsafe Shutdowns: 0x14
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x1
   Warning Composite Temperature Time: 3522 Mins
   Critical Composite Temperature Time: 1912 Mins
   Temperature Sensor 1: 320 K
   Temperature Sensor 2: 334 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~] esxcli nvme device log smart get -A vmhba1
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 320 K
   Available Spare: 100 %
   Available Spare Threshold: 1 %
   Percentage Used: 1 %
   Data Units Read: 0x1c78f11
   Data Units Written: 0x3020450
   Host Read Commands: 0x218425f1
   Host Write Commands: 0x2519b834
   Controller Busy Time: 0x892
   Power Cycles: 0xc7
   Power On Hours: 0x6df
   Unsafe Shutdowns: 0x14
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x1
   Warning Composite Temperature Time: 3522 Mins
   Critical Composite Temperature Time: 1912 Mins
   Temperature Sensor 1: 320 K
   Temperature Sensor 2: 332 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____SPD_SP7002D2TN
GH_________________________0200000000000000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1759   N/A        N/A    N/A
Power Cycle Count         199    N/A        N/A    N/A
Reallocated Sector Count  0      99         N/A    N/A
Drive Temperature         47     90         N/A    N/A
[root@esxi:~]

[root@esxi:~] esxcli nvme device log smart get -A vmhba0
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 327 K
   Available Spare: 100 %
   Available Spare Threshold: 10 %
   Percentage Used: 0 %
   Data Units Read: 0x28249f
   Data Units Written: 0x27eada
   Host Read Commands: 0x146b7f3
   Host Write Commands: 0x16305bb
   Controller Busy Time: 0xa3d
   Power Cycles: 0xb4
   Power On Hours: 0x611
   Unsafe Shutdowns: 0xf
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x0
   Warning Composite Temperature Time: 12 Mins
   Critical Composite Temperature Time: 1001 Mins
   Temperature Sensor 1: 0 K
   Temperature Sensor 2: 0 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____TWSC_TSC1BN256
2DF7T10A___________________0000000000010000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1553   N/A        N/A    N/A
Power Cycle Count         180    N/A        N/A    N/A
Reallocated Sector Count  0      90         N/A    N/A
Drive Temperature         54     83         N/A    N/A
[root@esxi:~] esxcli nvme device log smart get -A vmhba1
SMART And Health Info:
   Available Spare Space Below Threshold: false
   Temperature Warning: false
   NVM Subsystem Reliability Degradation: false
   Read Only Mode: false
   Volatile Memory Backup Device Failure: false
   Composite Temperature: 321 K
   Available Spare: 100 %
   Available Spare Threshold: 1 %
   Percentage Used: 1 %
   Data Units Read: 0x1cb74d7
   Data Units Written: 0x309f82b
   Host Read Commands: 0x21a21851
   Host Write Commands: 0x2596bdff
   Controller Busy Time: 0x899
   Power Cycles: 0xc7
   Power On Hours: 0x6e5
   Unsafe Shutdowns: 0x14
   Media Errors: 0x0
   Number of Error Info Log Entries: 0x1
   Warning Composite Temperature Time: 3788 Mins
   Critical Composite Temperature Time: 1936 Mins
   Temperature Sensor 1: 321 K
   Temperature Sensor 2: 342 K
   Temperature Sensor 3: 0 K
   Temperature Sensor 4: 0 K
   Temperature Sensor 5: 0 K
   Temperature Sensor 6: 0 K
   Temperature Sensor 7: 0 K
   Temperature Sensor 8: 0 K
[root@esxi:~] esxcli storage core device smart get -d t10.NVMe____SPD_SP7002D2TN
GH_________________________0200000000000000
Parameter                 Value  Threshold  Worst  Raw
------------------------  -----  ---------  -----  ---
Health Status             OK     N/A        N/A    N/A
Power-on Hours            1765   N/A        N/A    N/A
Power Cycle Count         199    N/A        N/A    N/A
Reallocated Sector Count  0      99         N/A    N/A
Drive Temperature         48     90         N/A    N/A
[root@esxi:~]

[root@esxi:~] /etc/init.d/sfcbd-watchdog status
sfcbd-init[1052108]: args ('status')
sfcbd-init[1052108]: Getting Exclusive access, please wait...
sfcbd-init[1052108]: Exclusive access granted.
sfcbd is not running
[root@esxi:~]

[root@esxi:~] /etc/init.d/sfcbd-watchdog start
sfcbd-init[1052119]: args ('start')
sfcbd-init[1052119]: Getting Exclusive access, please wait...
sfcbd-init[1052119]: Exclusive access granted.
sfcbd-init[1052119]: Request to start sfcbd-watchdog, pid 1052119
sfcbd-init[1052119]: sfcbd not started, administratively disabled.
[root@esxi:~]

[root@esxi:~] esxcli system wbem get
   Enabled: false
   WS-Management Service: true
   Enable HTTPS: true
   Authorization Model: password
   Port: 5989
   HTTP Procs: 2
   HTTPS Procs: 4
   Provider Procs: 16
   Keepalive Timeout: 1
   Keepalive Max Requests: 10
   Provider Sample Interval: 30
   Provider Timeout Interval: 120
   HTTP Max Content Length: 1048576
   Max Message Length: 40000000
   Thread Stack Size: 1048576
   Provider Resource Pool Override:
   SSL Cipher List: ECDHE+AESGCM:ECDHE+AES
   Threadpool Size: 5
   Readonly: false
   Log Level: warning
   Service Location Protocol PID: 0
   WS-Management PID: 0
   CIM Object Manager PID: 0
   Enabled SSL Protocols:
   Enabled System SSL Protocols: tlsv1.2
   Enabled Running SSL Protocols:
[root@esxi:~]

[root@esxi:~] esxcli system wbem set -e true
[root@esxi:~] esxcli system wbem get
   Enabled: true
   WS-Management Service: true
   Enable HTTPS: true
   Authorization Model: password
   Port: 5989
   HTTP Procs: 2
   HTTPS Procs: 4
   Provider Procs: 16
   Keepalive Timeout: 1
   Keepalive Max Requests: 10
   Provider Sample Interval: 30
   Provider Timeout Interval: 120
   HTTP Max Content Length: 1048576
   Max Message Length: 40000000
   Thread Stack Size: 1048576
   Provider Resource Pool Override:
   SSL Cipher List: ECDHE+AESGCM:ECDHE+AES
   Threadpool Size: 5
   Readonly: false
   Log Level: warning
   Service Location Protocol PID: 1052207
   WS-Management PID: 1053086
   CIM Object Manager PID: 1053049
   Enabled SSL Protocols:
   Enabled System SSL Protocols: tlsv1.2
   Enabled Running SSL Protocols: tlsv1.2
[root@esxi:~]

[root@esxi:~] /etc/init.d/sfcbd-watchdog status
sfcbd-init[1053334]: args ('status')
sfcbd-init[1053334]: Getting Exclusive access, please wait...
sfcbd-init[1053334]: Exclusive access granted.
sfcbd is running
[root@esxi:~]

[root@esxi:/vmfs/volumes/~/iso] ls -l /vmfs/volumes/~/iso/VMware-amd-zen-ipmi_thermal_910.1.0.0006-5vmw.803.0.0.24022510.zip
-rw-r--r--    1 root     root         23355 Jul  8 00:32 /vmfs/volumes/~/iso/VMware-amd-zen-ipmi_thermal_910.1.0.0006-5vmw.803.0.0.24022510.zip
[root@esxi:/vmfs/volumes/~/iso]

[root@esxi:/vmfs/volumes/~/iso] esxcli softwar
e component apply -d /vmfs/volumes/~/iso/VMwar
e-amd-zen-ipmi_thermal_910.1.0.0006-5vmw.803.0.0.24022510.zip
Installation Result
   Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.
   Components Installed: VMware-smntemp_910.1.0.0006-5vmw.803.0.0.24022510
   Components Removed:
   Components Skipped:
   Reboot Required: true
   DPU Results:
[root@esxi:/vmfs/volumes/~/iso]

[root@esxi:~] esxcli hardware ipmi sdr list
Node-Sensor  Description            Entity-Instance  Computed Reading  Base Unit  Raw Reading  Sensor Type  Timestamp/Comment    Raw  Formatted-Raw
-----------  ---------------------  ---------------  ----------------  ---------  -----------  -----------  -------------------  ---  -------------
0.1          Processor 1 CPU0_Tctl  3.1              59                degrees C  59           Temperature  2026-07-08T00:56:20
[root@esxi:~]

[root@esxi:~] lspci -v | grep -A2 '0000:00:18.3'
0000:00:18.3 Bridge Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 3
         Class 0600: 1022:15eb

[root@esxi:~] cat /etc/vmware/default.map.d/smntemp.map|grep 15eb
regtype=native,bus=pci,id=102215eb..............,driver=smntemp
[root@esxi:~]

systemctl --failed

# postqueue -p

# postfix abort

# for queid in `postqueue -p|grep "Jun 24 04"  |grep ユーザ名|awk '{ print $1 }' | sed s/\*//ig`; do postsuper -d $queid; done

# for queid in `postqueue -p|grep MAILER|awk '{ print $1 }' | sed s/\*//ig`; do postsuper -d $queid; done

netapp::> storage aggregate show


Aggregate     Size Available Used% State   #Vols  Nodes            RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0_netapp_01
           30.06GB    9.46GB   69% online       1 netapp-01        raid_dp,
                                                                   normal
netappSSD       0B        0B    0% restricted   0 netapp-01        raid_dp,
                                                                   normal
2 entries were displayed.

netapp::>

netapp::> storage aggregate online -aggregate netappSSD

Error: command failed: Failed to bring aggregate "netappSSD" online. Reason: Neither fsinfo block of aggregate
       'netappSSD' is valid.

netapp::>

netapp::> set diag

Warning: These diagnostic commands are for use by NetApp personnel only.
Do you want to continue? {y|n}: y

netapp::*> storage aggregate wafliron show
This table is currently empty.

netapp::*>

netapp::*> storage aggregate wafliron start -aggregate netappSSD

Warning: Aggregate netappSSD is in state "restricted". This aggregate might contain one or more SnapMirror
         destination volumes. You have chosen to skip wafliron on the SnapMirror destination volumes. Do you still
         want to continue? {y|n}: y
Initiated wafliron-start on aggregate "netappSSD".
Monitor the status with the "storage aggregate wafliron show" command.


netapp::*>

netapp::*> storage aggregate wafliron show
                                                Percent
                                        Percent Summary  Last Last Start
                                         Blocks  Blocks Start Related
Aggregate      State   Current Status   Scanned Scanned Errno Information
-------------- ------- ---------------- ------- ------- ----- ----------------
netappSSD      restricted
                       not_running            -       -   138 Neither fsinfo
                                                              block of
                                                              aggregate
                                                              'netappSSD' is
                                                              valid.

netapp::*>

netapp::*> storage aggregate show


Aggregate     Size Available Used% State   #Vols  Nodes            RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0_netapp_01
           30.06GB    9.95GB   67% online       1 netapp-01        raid_dp,
                                                                   normal
netappSSD       0B        0B    0% restricted   0 netapp-01        raid_dp,
                                                                   normal
2 entries were displayed.

netapp::*>

netapp::*> storage aggregate online -aggregate netappSSD

Error: command failed: Failed to bring aggregate "netappSSD" online. Reason: Neither fsinfo block of aggregate
       'netappSSD' is valid.

netapp::*>

root@proxmox1:~# apt upgrade
Not upgrading:
  zfs-initramfs  zfs-zed  zfsutils-linux

Summary:
  Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 3
root@proxmox1:~#

root@proxmox1:~# apt dist-upgrade
Upgrading:
  zfs-initramfs  zfs-zed  zfsutils-linux

Installing dependencies:
  libzfs7linux  libzpool7linux

REMOVING:
  libzfs6linux

Summary:
  Upgrading: 3, Installing: 2, Removing: 1, Not Upgrading: 0
  Download size: 2,308 kB
  Space needed: 4,470 kB / 31.8 GB available

Continue? [Y/n] y
Get:1 http://download.proxmox.com/debian/pve trixie/pve-no-subscription amd64 zfs-initramfs all 2.4.1-pve1 [26.8 kB]
Get:2 http://download.proxmox.com/debian/pve trixie/pve-no-subscription amd64 zfsutils-linux amd64 2.4.1-pve1 [596 kB]
Get:3 http://download.proxmox.com/debian/pve trixie/pve-no-subscription amd64 zfs-zed amd64 2.4.1-pve1 [71.0 kB]
Get:4 http://download.proxmox.com/debian/pve trixie/pve-no-subscription amd64 libzfs7linux amd64 2.4.1-pve1 [226 kB]
Get:5 http://download.proxmox.com/debian/pve trixie/pve-no-subscription amd64 libzpool7linux amd64 2.4.1-pve1 [1,388 kB]
Fetched 2,308 kB in 2s (935 kB/s)
Reading changelogs... Done
(Reading database ... 76859 files and directories currently installed.)
Preparing to unpack .../zfs-initramfs_2.4.1-pve1_all.deb ...
Unpacking zfs-initramfs (2.4.1-pve1) over (2.3.4-pve1) ...
Preparing to unpack .../zfsutils-linux_2.4.1-pve1_amd64.deb ...
Unpacking zfsutils-linux (2.4.1-pve1) over (2.3.4-pve1) ...
Preparing to unpack .../zfs-zed_2.4.1-pve1_amd64.deb ...
Unpacking zfs-zed (2.4.1-pve1) over (2.3.4-pve1) ...
(Reading database ... 76862 files and directories currently installed.)
Removing libzfs6linux:amd64 (2.3.4-pve1) ...
Removing 'diversion of /lib/x86_64-linux-gnu/libzfs_core.so.3 to /lib/x86_64-linux-gnu/libzfs_core.so.3.usr-is-merged by libzfs6linux'
Removing 'diversion of /lib/x86_64-linux-gnu/libzfs_core.so.3.0.0 to /lib/x86_64-linux-gnu/libzfs_core.so.3.0.0.usr-is-merged by libzfs6linux'
Selecting previously unselected package libzfs7linux:amd64.
(Reading database ... 76850 files and directories currently installed.)
Preparing to unpack .../libzfs7linux_2.4.1-pve1_amd64.deb ...
Unpacking libzfs7linux:amd64 (2.4.1-pve1) ...
Selecting previously unselected package libzpool7linux:amd64.
Preparing to unpack .../libzpool7linux_2.4.1-pve1_amd64.deb ...
Unpacking libzpool7linux:amd64 (2.4.1-pve1) ...
Setting up libzpool7linux:amd64 (2.4.1-pve1) ...
Setting up libzfs7linux:amd64 (2.4.1-pve1) ...
No diversion 'diversion of /lib/x86_64-linux-gnu/libzfs_core.so.3 to /lib/x86_64-linux-gnu/libzfs_core.so.3.usr-is-merged by libzfs6linux', none removed.
No diversion 'diversion of /lib/x86_64-linux-gnu/libzfs_core.so.3.0.0 to /lib/x86_64-linux-gnu/libzfs_core.so.3.0.0.usr-is-merged by libzfs6linux', none removed.
Setting up zfsutils-linux (2.4.1-pve1) ...
Installing new version of config file /etc/default/zfs ...
Installing new version of config file /etc/zfs/zfs-functions ...
zfs-import-scan.service is a disabled or a static unit, not starting it.
Setting up zfs-initramfs (2.4.1-pve1) ...
Setting up zfs-zed (2.4.1-pve1) ...
Processing triggers for libc-bin (2.41-12+deb13u2) ...
Processing triggers for man-db (2.13.1-1) ...
Processing triggers for initramfs-tools (0.148.3) ...
update-initramfs: Generating /boot/initrd.img-7.0.2-2-pve
Running hook script 'zz-proxmox-boot'..
Re-executing '/etc/kernel/postinst.d/zz-proxmox-boot' in new private mount namespace..
No /etc/kernel/proxmox-boot-uuids found, skipping ESP sync.
root@proxmox1:~#

root@proxmox1:~# apt update
Hit:1 http://security.debian.org/debian-security trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://download.proxmox.com/debian/ceph-squid trixie InRelease
Hit:5 http://download.proxmox.com/debian/pve trixie InRelease
All packages are up to date.
root@proxmox1:~#

dovecot_destination_recipient_limit = 1
virtual_mailbox_domains = your.domain.here
virtual_transport = dovecot

dovecot   unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/dovecot-lda -f ${sender} -d ${recipient}

$ telnet メールサーバホスト名 25
Trying 192.168.x.x...
Connected to 192.168.x.x.
Escape character is '^]'
220 メールサーバホスト名 ESMTP Postfix
ehlo testhost
250-メールサーバホスト名
250-＜以下省略＞
mail from: <>
250 2.1.0 Ok
rcpt to: nothing@your.domain.here
250 2.1.5 Ok

$ telnet メールサーバホスト名 25
Trying 192.168.x.x...
Connected to 192.168.x.x.
Escape character is '^]'
220 メールサーバホスト名 ESMTP Postfix
ehlo testhost
250-メールサーバホスト名
250-＜以下省略＞
mail from: <>
250 2.1.0 Ok
rcpt to: nothing@your.domain.here
550 5.1.1 <nothing@your.domain.here>: Recipient address rejected: User unknown in virtual mailbox table

[root@xxxxxxxxxxx mysql]# ls -ltr /var/lib/mysql/binlog*
-rw-r-----. 1 mysql mysql 1076027128 Apr 11 12:15 /var/lib/mysql/binlog.000401
-rw-r-----. 1 mysql mysql  895282121 Apr 23 06:48 /var/lib/mysql/binlog.000402
-rw-r-----. 1 mysql mysql 1076428654 Apr 23 19:12 /var/lib/mysql/binlog.000403
-rw-r-----. 1 mysql mysql  596357576 Apr 24 03:25 /var/lib/mysql/binlog.000404
-rw-r-----. 1 mysql mysql 1074553571 Apr 24 22:57 /var/lib/mysql/binlog.000405
-rw-r-----. 1 mysql mysql 1075609896 Apr 26 11:28 /var/lib/mysql/binlog.000406
-rw-r-----. 1 mysql mysql 1075981972 Apr 27 18:37 /var/lib/mysql/binlog.000407
-rw-r-----. 1 mysql mysql 1075913505 Apr 28 00:47 /var/lib/mysql/binlog.000408
-rw-r-----. 1 mysql mysql 1075838660 Apr 28 05:05 /var/lib/mysql/binlog.000409
-rw-r-----. 1 mysql mysql 1075205513 Apr 28 08:48 /var/lib/mysql/binlog.000410
-rw-r-----. 1 mysql mysql    5651277 Apr 29 23:47 /var/lib/mysql/binlog.000411
-rw-r-----. 1 mysql mysql    2052256 Apr 29 23:56 /var/lib/mysql/binlog.000412
-rw-r-----. 1 mysql mysql     101787 Apr 30 00:01 /var/lib/mysql/binlog.000413
-rw-r-----. 1 mysql mysql    3171581 Apr 30 03:19 /var/lib/mysql/binlog.000414
-rw-r-----. 1 mysql mysql 1074621728 May  3 02:47 /var/lib/mysql/binlog.000415
-rw-r-----. 1 mysql mysql 1074747087 May  5 18:27 /var/lib/mysql/binlog.000416
-rw-r-----. 1 mysql mysql 1074122275 May  6 01:02 /var/lib/mysql/binlog.000417
-rw-r-----. 1 mysql mysql 1076183303 May  6 16:09 /var/lib/mysql/binlog.000418
-rw-r-----. 1 mysql mysql 1074003040 May  7 01:08 /var/lib/mysql/binlog.000419
-rw-r-----. 1 mysql mysql        320 May  7 01:08 /var/lib/mysql/binlog.index
-rw-r-----. 1 mysql mysql  286409863 May  7 16:07 /var/lib/mysql/binlog.000420
[root@xxxxxxxxxxx mysql]# 

[root@xxxxxxxxxxx mysql]# mysql -u root
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 50827
Server version: 8.0.45 Source distribution

Copyright (c) 2000, 2026, Oracle and/or its affiliates.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show variables like 'binlog%';
+------------------------------------------------+--------------+
| Variable_name                                  | Value        |
+------------------------------------------------+--------------+
| binlog_cache_size                              | 32768        |
| binlog_checksum                                | CRC32        |
| binlog_direct_non_transactional_updates        | OFF          |
| binlog_encryption                              | OFF          |
| binlog_error_action                            | ABORT_SERVER |
| binlog_expire_logs_auto_purge                  | ON           |
| binlog_expire_logs_seconds                     | 2592000      |
| binlog_format                                  | ROW          |
| binlog_group_commit_sync_delay                 | 0            |
| binlog_group_commit_sync_no_delay_count        | 0            |
| binlog_gtid_simple_recovery                    | ON           |
| binlog_max_flush_queue_time                    | 0            |
| binlog_order_commits                           | ON           |
| binlog_rotate_encryption_master_key_at_startup | OFF          |
| binlog_row_event_max_size                      | 8192         |
| binlog_row_image                               | FULL         |
| binlog_row_metadata                            | MINIMAL      |
| binlog_row_value_options                       |              |
| binlog_rows_query_log_events                   | OFF          |
| binlog_stmt_cache_size                         | 32768        |
| binlog_transaction_compression                 | OFF          |
| binlog_transaction_compression_level_zstd      | 3            |
| binlog_transaction_dependency_history_size     | 25000        |
| binlog_transaction_dependency_tracking         | COMMIT_ORDER |
+------------------------------------------------+--------------+
24 rows in set (0.00 sec)

mysql> 

mysql> show binary logs;
+---------------+------------+-----------+
| Log_name      | File_size  | Encrypted |
+---------------+------------+-----------+
| binlog.000401 | 1076027128 | No        |
| binlog.000402 |  895282121 | No        |
| binlog.000403 | 1076428654 | No        |
| binlog.000404 |  596357576 | No        |
| binlog.000405 | 1074553571 | No        |
| binlog.000406 | 1075609896 | No        |
| binlog.000407 | 1075981972 | No        |
| binlog.000408 | 1075913505 | No        |
| binlog.000409 | 1075838660 | No        |
| binlog.000410 | 1075205513 | No        |
| binlog.000411 |    5651277 | No        |
| binlog.000412 |    2052256 | No        |
| binlog.000413 |     101787 | No        |
| binlog.000414 |    3171581 | No        |
| binlog.000415 | 1074621728 | No        |
| binlog.000416 | 1074747087 | No        |
| binlog.000417 | 1074122275 | No        |
| binlog.000418 | 1076183303 | No        |
| binlog.000419 | 1074003040 | No        |
| binlog.000420 |  319677238 | No        |
+---------------+------------+-----------+
20 rows in set (0.02 sec)

mysql> 

mysql> set PERSIST binlog_expire_logs_seconds=604800;
Query OK, 0 rows affected (0.00 sec)

mysql> show variables like 'binlog%';
+------------------------------------------------+--------------+
| Variable_name                                  | Value        |
+------------------------------------------------+--------------+
| binlog_cache_size                              | 32768        |
| binlog_checksum                                | CRC32        |
| binlog_direct_non_transactional_updates        | OFF          |
| binlog_encryption                              | OFF          |
| binlog_error_action                            | ABORT_SERVER |
| binlog_expire_logs_auto_purge                  | ON           |
| binlog_expire_logs_seconds                     | 604800       |
| binlog_format                                  | ROW          |
| binlog_group_commit_sync_delay                 | 0            |
| binlog_group_commit_sync_no_delay_count        | 0            |
| binlog_gtid_simple_recovery                    | ON           |
| binlog_max_flush_queue_time                    | 0            |
| binlog_order_commits                           | ON           |
| binlog_rotate_encryption_master_key_at_startup | OFF          |
| binlog_row_event_max_size                      | 8192         |
| binlog_row_image                               | FULL         |
| binlog_row_metadata                            | MINIMAL      |
| binlog_row_value_options                       |              |
| binlog_rows_query_log_events                   | OFF          |
| binlog_stmt_cache_size                         | 32768        |
| binlog_transaction_compression                 | OFF          |
| binlog_transaction_compression_level_zstd      | 3            |
| binlog_transaction_dependency_history_size     | 25000        |
| binlog_transaction_dependency_tracking         | COMMIT_ORDER |
+------------------------------------------------+--------------+
24 rows in set (0.00 sec)

mysql> 

mysql> show binary logs;
+---------------+------------+-----------+
| Log_name      | File_size  | Encrypted |
+---------------+------------+-----------+
| binlog.000401 | 1076027128 | No        |
| binlog.000402 |  895282121 | No        |
| binlog.000403 | 1076428654 | No        |
| binlog.000404 |  596357576 | No        |
| binlog.000405 | 1074553571 | No        |
| binlog.000406 | 1075609896 | No        |
| binlog.000407 | 1075981972 | No        |
| binlog.000408 | 1075913505 | No        |
| binlog.000409 | 1075838660 | No        |
| binlog.000410 | 1075205513 | No        |
| binlog.000411 |    5651277 | No        |
| binlog.000412 |    2052256 | No        |
| binlog.000413 |     101787 | No        |
| binlog.000414 |    3171581 | No        |
| binlog.000415 | 1074621728 | No        |
| binlog.000416 | 1074747087 | No        |
| binlog.000417 | 1074122275 | No        |
| binlog.000418 | 1076183303 | No        |
| binlog.000419 | 1074003040 | No        |
| binlog.000420 |  358509579 | No        |
+---------------+------------+-----------+
20 rows in set (0.00 sec)

mysql> 

mysql> PURGE BINARY LOGS BEFORE '2026-05-01 00:00:00';
Query OK, 0 rows affected (0.02 sec)

mysql> show binary logs;
+---------------+------------+-----------+
| Log_name      | File_size  | Encrypted |
+---------------+------------+-----------+
| binlog.000415 | 1074621728 | No        |
| binlog.000416 | 1074747087 | No        |
| binlog.000417 | 1074122275 | No        |
| binlog.000418 | 1076183303 | No        |
| binlog.000419 | 1074003040 | No        |
| binlog.000420 |  377894939 | No        |
+---------------+------------+-----------+
6 rows in set (0.00 sec)

mysql> 

[root@xxxxxxxxxxx mysql]# ls -ltr /var/lib/mysql/binlog*
-rw-r-----. 1 mysql mysql 1074621728 May  3 02:47 /var/lib/mysql/binlog.000415
-rw-r-----. 1 mysql mysql 1074747087 May  5 18:27 /var/lib/mysql/binlog.000416
-rw-r-----. 1 mysql mysql 1074122275 May  6 01:02 /var/lib/mysql/binlog.000417
-rw-r-----. 1 mysql mysql 1076183303 May  6 16:09 /var/lib/mysql/binlog.000418
-rw-r-----. 1 mysql mysql 1074003040 May  7 01:08 /var/lib/mysql/binlog.000419
-rw-r-----. 1 mysql mysql         96 May  7 16:25 /var/lib/mysql/binlog.index
-rw-r-----. 1 mysql mysql  383435241 May  7 16:25 /var/lib/mysql/binlog.000420
[root@xxxxxxxxxxx mysql]# 

[root@xxxxxxxxxxx ~]# ls -ltr /var/lib/mysql/bin*
-rw-r-----. 1 mysql mysql 1074747087 May  5 18:27 /var/lib/mysql/binlog.000416
-rw-r-----. 1 mysql mysql 1074122275 May  6 01:02 /var/lib/mysql/binlog.000417
-rw-r-----. 1 mysql mysql 1076183303 May  6 16:09 /var/lib/mysql/binlog.000418
-rw-r-----. 1 mysql mysql 1074003040 May  7 01:08 /var/lib/mysql/binlog.000419
-rw-r-----. 1 mysql mysql 1074323672 May  8 03:18 /var/lib/mysql/binlog.000420
-rw-r-----. 1 mysql mysql 1073965591 May  8 16:47 /var/lib/mysql/binlog.000421
-rw-r-----. 1 mysql mysql 1074897443 May 10 12:39 /var/lib/mysql/binlog.000422
-rw-r-----. 1 mysql mysql        128 May 10 12:39 /var/lib/mysql/binlog.index
-rw-r-----. 1 mysql mysql  576882057 May 11 14:17 /var/lib/mysql/binlog.000423
[root@xxxxxxxxxxx ~]#

[root@xxxxxxxxxxx ~]# ls -ltr /var/lib/mysql/bin*
-rw-r-----. 1 mysql mysql 1074747087 May  5 18:27 /var/lib/mysql/binlog.000416
-rw-r-----. 1 mysql mysql 1074122275 May  6 01:02 /var/lib/mysql/binlog.000417
-rw-r-----. 1 mysql mysql 1076183303 May  6 16:09 /var/lib/mysql/binlog.000418
-rw-r-----. 1 mysql mysql 1074003040 May  7 01:08 /var/lib/mysql/binlog.000419
-rw-r-----. 1 mysql mysql 1074323672 May  8 03:18 /var/lib/mysql/binlog.000420
-rw-r-----. 1 mysql mysql 1073965591 May  8 16:47 /var/lib/mysql/binlog.000421
-rw-r-----. 1 mysql mysql 1074897443 May 10 12:39 /var/lib/mysql/binlog.000422
-rw-r-----. 1 mysql mysql        128 May 10 12:39 /var/lib/mysql/binlog.index
-rw-r-----. 1 mysql mysql  867993952 May 12 11:46 /var/lib/mysql/binlog.000423
[root@xxxxxxxxxxx ~]# 

-rw-r-----. 1 mysql mysql         56 Nov 16  2021  auto.cnf
-rw-r-----. 1 mysql mysql  880718553 May 14 03:39  binlog.000424
-rw-r-----. 1 mysql mysql 1074983980 May 15 22:05  binlog.000425
-rw-r-----. 1 mysql mysql 1074458947 May 16 01:00  binlog.000426
-rw-r-----. 1 mysql mysql 1076353655 May 16 04:11  binlog.000427
-rw-r-----. 1 mysql mysql 1075894927 May 16 11:45  binlog.000428
-rw-r-----. 1 mysql mysql 1076430757 May 16 20:30  binlog.000429
-rw-r-----. 1 mysql mysql 1074418130 May 17 01:11  binlog.000430
-rw-r-----. 1 mysql mysql 1075734983 May 17 17:52  binlog.000431
-rw-r-----. 1 mysql mysql 1074210923 May 18 13:17  binlog.000432
-rw-r-----. 1 mysql mysql 1074818836 May 18 19:42  binlog.000433
-rw-r-----. 1 mysql mysql 1075645558 May 19 00:18  binlog.000434
-rw-r-----. 1 mysql mysql 1074848030 May 19 10:46  binlog.000435
-rw-r-----. 1 mysql mysql 1075579091 May 19 15:20  binlog.000436
-rw-r-----. 1 mysql mysql 1076234338 May 19 20:25  binlog.000437
-rw-r-----. 1 mysql mysql  618166201 May 20 03:45  binlog.000438
-rw-r-----. 1 mysql mysql 1075233776 May 20 15:03  binlog.000439
-rw-r-----. 1 mysql mysql 1076237754 May 20 18:18  binlog.000440
-rw-r-----. 1 mysql mysql 1074276162 May 20 21:19  binlog.000441
-rw-r-----. 1 mysql mysql  227580182 May 21 11:19  binlog.000442
-rw-r-----. 1 mysql mysql        304 May 20 21:19  binlog.index

mysql> set PERSIST binlog_expire_logs_seconds=1;
Query OK, 0 rows affected (0.00 sec)

mysql> show variables like 'binlog%';
+------------------------------------------------+--------------+
| Variable_name                                  | Value        |
+------------------------------------------------+--------------+
| binlog_cache_size                              | 32768        |
| binlog_checksum                                | CRC32        |
| binlog_direct_non_transactional_updates        | OFF          |
| binlog_encryption                              | OFF          |
| binlog_error_action                            | ABORT_SERVER |
| binlog_expire_logs_auto_purge                  | ON           |
| binlog_expire_logs_seconds                     | 1            |
| binlog_format                                  | ROW          |
| binlog_group_commit_sync_delay                 | 0            |
| binlog_group_commit_sync_no_delay_count        | 0            |
| binlog_gtid_simple_recovery                    | ON           |
| binlog_max_flush_queue_time                    | 0            |
| binlog_order_commits                           | ON           |
| binlog_rotate_encryption_master_key_at_startup | OFF          |
| binlog_row_event_max_size                      | 8192         |
| binlog_row_image                               | FULL         |
| binlog_row_metadata                            | MINIMAL      |
| binlog_row_value_options                       |              |
| binlog_rows_query_log_events                   | OFF          |
| binlog_stmt_cache_size                         | 32768        |
| binlog_transaction_compression                 | OFF          |
| binlog_transaction_compression_level_zstd      | 3            |
| binlog_transaction_dependency_history_size     | 25000        |
| binlog_transaction_dependency_tracking         | COMMIT_ORDER |
+------------------------------------------------+--------------+
24 rows in set (0.00 sec)

mysql> perge binary logs before '2026-05-20 00:00:00';
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'perge binary logs before '2026-05-20 00:00:00'' at line 1
mysql> purge binary logs before '2026-05-20 00:00:00';
Query OK, 0 rows affected (0.12 sec)

mysql> show binary logs;
+---------------+------------+-----------+
| Log_name      | File_size  | Encrypted |
+---------------+------------+-----------+
| binlog.000438 |  618166201 | No        |
| binlog.000439 | 1075233776 | No        |
| binlog.000440 | 1076237754 | No        |
| binlog.000441 | 1074276162 | No        |
| binlog.000442 |  234276939 | No        |
+---------------+------------+-----------+
5 rows in set (0.00 sec)

mysql> purge binary logs before '2026-05-21 00:00:00';
Query OK, 0 rows affected, 1 warning (0.05 sec)

mysql> show binary logs;
+---------------+-----------+-----------+
| Log_name      | File_size | Encrypted |
+---------------+-----------+-----------+
| binlog.000442 | 234276939 | No        |
+---------------+-----------+-----------+
1 row in set (0.00 sec)

mysql> 

error alert
Lcm prechecks detected 1 issue that would cause upgrade failures.

Check 'test_ntp_server_reachability' failed: Failure reason: Cannot upgrade if the configured NTP server(s): ['0.pool.ntp.org', '1.pool.ntp.org'] are not reachable. For details read article 6401

[root@NTNX-4bc9a811-A ~]# chronyc -n sources -v

  .-- Source mode  '^' = server, '=' = peer, '#' = local clock.
 / .- Source state '*' = current best, '+' = combined, '-' = not combined,
| /             'x' = may be in error, '~' = too variable, '?' = unusable.
||                                                 .- xxxx [ yyyy ] +/- zzzz
||      Reachability register (octal) -.           |  xxxx = adjusted offset,
||      Log2(Polling interval) --.      |          |  yyyy = measured offset,
||                                \     |          |  zzzz = estimated error.
||                                 |    |           \
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^? 163.5.56.11                   0   9     0     -     +0ns[   +0ns] +/-    0ns
^? 109.61.109.140                0   9     0     -     +0ns[   +0ns] +/-    0ns
^? 192.168.1.1                   0   8     0     -     +0ns[   +0ns] +/-    0ns
[root@NTNX-4bc9a811-A ~]#

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo chronyc -n sources -v

  .-- Source mode  '^' = server, '=' = peer, '#' = local clock.
 / .- Source state '*' = current best, '+' = combined, '-' = not combined,
| /             'x' = may be in error, '~' = too variable, '?' = unusable.
||                                                 .- xxxx [ yyyy ] +/- zzzz
||      Reachability register (octal) -.           |  xxxx = adjusted offset,
||      Log2(Polling interval) --.      |          |  yyyy = measured offset,
||                                \     |          |  zzzz = estimated error.
||                                 |    |           \
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo cat /etc/chrony.conf
# Auto generated by ChronyConfig on Thu Jul  9 01:28:04 2026

local stratum 10
driftfile /var/lib/chrony/drift
maxdistance 16.0
makestep 1.0 3
rtcsync
allow 0.0.0.0/0
allow 127.0.0.1
allow ::/0
allow ::1
leapsectz right/UTC
cmdport 0
logdir /var/log/chrony
log measurements statistics tracking
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~

[root@NTNX-4bc9a811-A ~]# cat /etc/chrony.conf
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
keyfile /etc/chrony.keys

# Get TAI-UTC offset and leap seconds from the system tz database.
leapsectz right/UTC

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking
port 0
cmdport 0
server 1.pool.ntp.org maxpoll 10 iburst
server 0.pool.ntp.org maxpoll 10 iburst
server 192.168.1.1 maxpoll 10 iburst
[root@NTNX-4bc9a811-A ~]#

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ ncli cluster get-ntp-servers

    NTP Servers               : 0.pool.ntp.org, 1.pool.ntp.org, 192.168.1.1
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ nc -vz -u 192.168.1.1 123
Ncat: Version 7.92 ( https://nmap.org/ncat )
Ncat: Connected to 192.168.1.1:123.
Ncat: UDP packet sent successfully
Ncat: 1 bytes sent, 0 bytes received in 2.02 seconds.
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ nc -vz -u 163.5.56.11 123
Ncat: Version 7.92 ( https://nmap.org/ncat )
Ncat: Connected to 163.5.56.11:123.
Ncat: UDP packet sent successfully
Ncat: 1 bytes sent, 0 bytes received in 2.01 seconds.
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ nc -vz -u 109.61.109.140 123
Ncat: Version 7.92 ( https://nmap.org/ncat )
Ncat: Connected to 109.61.109.140:123.
Ncat: UDP packet sent successfully
Ncat: 1 bytes sent, 0 bytes received in 2.02 seconds.
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo vi /etc/chrony.conf
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo cat /etc/chrony.conf
# Auto generated by ChronyConfig on Thu Jul  9 01:28:04 2026

local stratum 10
driftfile /var/lib/chrony/drift
maxdistance 16.0
makestep 1.0 3
rtcsync
allow 0.0.0.0/0
allow 127.0.0.1
allow ::/0
allow ::1
leapsectz right/UTC
cmdport 0
logdir /var/log/chrony
log measurements statistics tracking
server 192.168.1.1 maxpoll 10 iburst
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo systemctl restart chronyd
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo chronyc -n sources -v

  .-- Source mode  '^' = server, '=' = peer, '#' = local clock.
 / .- Source state '*' = current best, '+' = combined, '-' = not combined,
| /             'x' = may be in error, '~' = too variable, '?' = unusable.
||                                                 .- xxxx [ yyyy ] +/- zzzz
||      Reachability register (octal) -.           |  xxxx = adjusted offset,
||      Log2(Polling interval) --.      |          |  yyyy = measured offset,
||                                \     |          |  zzzz = estimated error.
||                                 |    |           \
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^? 192.168.1.1                   0   6     0     -     +0ns[   +0ns] +/-    0ns
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ ncc health_checks network_checks check_ntp

####################################################
# TIMESTAMP : Thu Jul 09 01:52:10 2026 (UTC +0000) #
####################################################
Cluster Name: cvm
Cluster Id: 3772327690115644291
Cluster UUID: 00064e84-58d6-fd69-345a-000c29b67b83
Cluster Version: 6.8.1
NCC Version: 5.0.1-83db8d0f
    CVM ID(Svmid)            : 2
    CVM external IP          : 192.168.1.14
    Hypervisor IP            : 192.168.1.13
    Hypervisor version       : Nutanix 20230302.101026
    Node serial              : 61e640f9-e1fe-4ba3-a4cc-8c2384c95c9a
    Model                    : CommunityEdition
    Node Position            : A
    Block S/N                : 4bc9a811


Running : health_checks network_checks check_ntp
[==================================================] 100%
/health_checks/network_checks/check_ntp                                              [ WARN ]
---------------------------------------------------------------------------------------------+

Detailed information for check_ntp:
Node 192.168.1.14:
WARN: NTP servers configured on CVM (['192.168.1.1']) differ from those configured in the cluster (['0.pool.ntp.org', '1.pool.ntp.org', '192.168.1.1']).
WARN: The host (192.168.1.13) is not synchronizing with any NTP server. This might occur if none of the configured NTP servers are available or you are currently experiencing network instability determined by the high offset/high jitter.
Refer to KB 4519 (http://portal.nutanix.com/kb/4519) for details on check_ntp or Recheck with: ncc health_checks network_checks check_ntp --cvm_list=192.168.1.14
+-----------------------+
| State         | Count |
+-----------------------+
| Warning       | 1     |
| Total Plugins | 1     |
+-----------------------+
Plugin output written to /home/nutanix/data/logs/ncc-output-latest.log
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo vi /etc/chrony.conf
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo cat /etc/chrony.conf
# Auto generated by ChronyConfig on Thu Jul  9 01:28:04 2026

local stratum 10
driftfile /var/lib/chrony/drift
maxdistance 16.0
makestep 1.0 3
rtcsync
allow 0.0.0.0/0
allow 127.0.0.1
allow ::/0
allow ::1
leapsectz right/UTC
cmdport 0
logdir /var/log/chrony
log measurements statistics tracking
server 192.168.1.1 maxpoll 10 iburst
server 1.pool.ntp.org maxpoll 10 iburst
server 0.pool.ntp.org maxpoll 10 iburst
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo systemctl restart chronyd
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo chronyc -n sources -v

  .-- Source mode  '^' = server, '=' = peer, '#' = local clock.
 / .- Source state '*' = current best, '+' = combined, '-' = not combined,
| /             'x' = may be in error, '~' = too variable, '?' = unusable.
||                                                 .- xxxx [ yyyy ] +/- zzzz
||      Reachability register (octal) -.           |  xxxx = adjusted offset,
||      Log2(Polling interval) --.      |          |  yyyy = measured offset,
||                                \     |          |  zzzz = estimated error.
||                                 |    |           \
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^? 192.168.1.1                   0   6     0     -     +0ns[   +0ns] +/-    0ns
^? 122.215.240.52                0   6     0     -     +0ns[   +0ns] +/-    0ns
^? 46.250.253.227                0   6     0     -     +0ns[   +0ns] +/-    0ns
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ ncc health_checks network_checks check_ntp

####################################################
# TIMESTAMP : Thu Jul 09 01:57:28 2026 (UTC +0000) #
####################################################
Cluster Name: cvm
Cluster Id: 3772327690115644291
Cluster UUID: 00064e84-58d6-fd69-345a-000c29b67b83
Cluster Version: 6.8.1
NCC Version: 5.0.1-83db8d0f
    CVM ID(Svmid)            : 2
    CVM external IP          : 192.168.1.14
    Hypervisor IP            : 192.168.1.13
    Hypervisor version       : Nutanix 20230302.101026
    Node serial              : 61e640f9-e1fe-4ba3-a4cc-8c2384c95c9a
    Model                    : CommunityEdition
    Node Position            : A
    Block S/N                : 4bc9a811


Running : health_checks network_checks check_ntp
[==================================================] 100%
/health_checks/network_checks/check_ntp                                              [ ERR  ]
---------------------------------------------------------------------------------------------+

Detailed information for check_ntp:
Node 192.168.1.14:
ERR : node (service_vm_id: 2) : NTP synchronized to server which is neither in the cluster nor in the list of allowed NTP servers
WARN: The host (192.168.1.13) is not synchronizing with any NTP server. This might occur if none of the configured NTP servers are available or you are currently experiencing network instability determined by the high offset/high jitter.
Refer to KB 4519 (http://portal.nutanix.com/kb/4519) for details on check_ntp or Recheck with: ncc health_checks network_checks check_ntp --cvm_list=192.168.1.14

One or more plugins generated ERROR as there were insufficient data to validate results. Please resolve other reported issues and re-run the health checks.
+-----------------------+
| State         | Count |
+-----------------------+
| Error         | 1     |
| Total Plugins | 1     |
+-----------------------+
Plugin output written to /home/nutanix/data/logs/ncc-output-latest.log
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo chronyc tracking
Reference ID    : 7F7F0101 ()
Stratum         : 10
Ref time (UTC)  : Thu Jul 09 02:06:19 2026
System time     : 0.000000004 seconds slow of NTP time
Last offset     : +0.000000000 seconds
RMS offset      : 0.000000000 seconds
Frequency       : 5.919 ppm slow
Residual freq   : +0.000 ppm
Skew            : 0.000 ppm
Root delay      : 0.000000000 seconds
Root dispersion : 0.000000000 seconds
Update interval : 0.0 seconds
Leap status     : Normal
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

[root@NTNX-4bc9a811-A ~]# chronyc tracking
Reference ID    : 00000000 ()
Stratum         : 0
Ref time (UTC)  : Thu Jan 01 00:00:00 1970
System time     : 0.000000000 seconds slow of NTP time
Last offset     : +0.000000000 seconds
RMS offset      : 0.000000000 seconds
Frequency       : 5.788 ppm slow
Residual freq   : +0.000 ppm
Skew            : 0.000 ppm
Root delay      : 1.000000000 seconds
Root dispersion : 1.000000000 seconds
Update interval : 0.0 seconds
Leap status     : Not synchronised
[root@NTNX-4bc9a811-A ~]#

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ ncc health_checks network_checks check_ntp --cvm_list=192.168.1.14

####################################################
# TIMESTAMP : Thu Jul 09 06:07:56 2026 (UTC +0000) #
####################################################
Cluster Name: cvm
Cluster Id: 3772327690115644291
Cluster UUID: 00064e84-58d6-fd69-345a-000c29b67b83
Cluster Version: 6.8.1
NCC Version: 5.0.1-83db8d0f
    CVM ID(Svmid)            : 2
    CVM external IP          : 192.168.1.14
    Hypervisor IP            : 192.168.1.13
    Hypervisor version       : Nutanix 20230302.101026
    Node serial              : 61e640f9-e1fe-4ba3-a4cc-8c2384c95c9a
    Model                    : CommunityEdition
    Node Position            : A
    Block S/N                : 4bc9a811


Running : health_checks network_checks check_ntp
[==================================================] 100%
/health_checks/network_checks/check_ntp                                              [ WARN ]
---------------------------------------------------------------------------------------------+

Detailed information for check_ntp:
Node 192.168.1.14:
WARN: NTP servers configured on CVM (['0.pool.ntp.org', '192.168.1.1', '1.pool.ntp.org']) differ from those configured in the cluster (['0.pool.ntp.org', '1.pool.ntp.org', '192.168.1.1', '192.168.1.10']).
Refer to KB 4519 (http://portal.nutanix.com/kb/4519) for details on check_ntp or Recheck with: ncc health_checks network_checks check_ntp --cvm_list=192.168.1.14
+-----------------------+
| State         | Count |
+-----------------------+
| Warning       | 1     |
| Total Plugins | 1     |
+-----------------------+
Plugin output written to /home/nutanix/data/logs/ncc-output-latest.log
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$ sudo cat /etc/chrony.conf
# Auto generated by ChronyConfig on Thu Jul  9 06:11:50 2026

pool 0.pool.ntp.org iburst maxpoll 10
server 192.168.1.10 iburst maxpoll 10
pool 1.pool.ntp.org iburst maxpoll 10
server 192.168.1.1 iburst maxpoll 10
local stratum 10
driftfile /var/lib/chrony/drift
maxdistance 16.0
makestep 1.0 3
rtcsync
allow 0.0.0.0/0
allow 127.0.0.1
allow ::/0
allow ::1
leapsectz right/UTC
cmdport 0
logdir /var/log/chrony
log measurements statistics tracking
nutanix@NTNX-4bc9a811-A-CVM:192.168.1.14:~$

Arduino：1.8.19 (Linux), ボード："ESP32C3 Dev Module, Disabled, Disabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 160MHz (WiFi), QIO, 80MHz, 4MB (32Mb), 921600, None, Disabled, Disabled"

警告：ライブラリESP_SRのカテゴリ「Sound」は有効ではありません。「Uncategorized」に設定します。
警告：ライブラリHashのカテゴリ「Security」は有効ではありません。「Uncategorized」に設定します。
警告：ライブラリESP Insightsのカテゴリ「」は有効ではありません。「Uncategorized」に設定します。
警告：ライブラリESP RainMakerのカテゴリ「」は有効ではありません。「Uncategorized」に設定します。
警告：ライブラリTFLite Microのカテゴリ「」は有効ではありません。「Uncategorized」に設定します。
警告：ライブラリWiFiProvのカテゴリ「」は有効ではありません。「Uncategorized」に設定します。
最大1310720バイトのフラッシュメモリのうち、スケッチが282882バイト（21%）を使っています。
最大327680バイトのRAMのうち、グローバル変数が14240バイト（4%）を使っていて、ローカル変数で313440バイト使うことができます。
                                                                                
 Usage: esptool [OPTIONS] COMMAND [ARGS]...                                     
                                                                                
 Try 'esptool -h' for help                                                      
╭─ Error ──────────────────────────────────────────────────────────────────────╮
│ Invalid value for '--port' / '-p': Path '/dev/ttyACM0' is not readable.      │
╰──────────────────────────────────────────────────────────────────────────────╯
                                                                                
シリアルポート「                                                                                
」が選択されていますが、そのポートは存在しないか、ボードが接続されていません。


「ファイル」メニューの「環境設定」から
「より詳細な情報を表示する：コンパイル」を有効にすると
より詳しい情報が表示されます。

pcuser@ubuntu:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 001 Device 007: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 001 Device 008: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 001 Device 022: ID 303a:1001 Espressif USB JTAG/serial debug unit
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
pcuser@ubuntu:~$

root@ubuntu:~# /home/pcuser/.arduino15/packages/esp32/tools/esptool_py/5.1.0/esptool --port /dev/ttyACM0 chip-id
esptool v5.1.0
Connected to ESP32-C3 on /dev/ttyACM0:
Chip type:          ESP32-C3 (QFN32) (revision v0.4)
Features:           Wi-Fi, BT 5 (LE), Single Core, 160MHz, Embedded Flash 4MB (XMC)
Crystal frequency:  40MHz
USB mode:           USB-Serial/JTAG
MAC:                ac:eb:e6:6d:6b:b0

Stub flasher running.

Warning: ESP32-C3 has no chip ID. Reading MAC address instead.
MAC:                ac:eb:e6:6d:6b:b0

Hard resetting via RTS pin...
root@ubuntu:~#

pcuser@ubuntu:~$ /home/pcuser/.arduino15/packages/esp32/tools/esptool_py/5.1.0/esptool --port /dev/ttyACM0 chip-id

 Usage: esptool [OPTIONS] COMMAND [ARGS]...

 Try 'esptool -h' for help
lq Error qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x Invalid value for '--port' / '-p': Path '/dev/ttyACM0' is not readable.     x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj

pcuser@ubuntu:~$

pcuser@ubuntu:~$ ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0  4月  8 11:40 /dev/ttyACM0
pcuser@ubuntu:~$

pcuser@ubuntu:~$ sudo chmod a+rw /dev/ttyACM0
[sudo] pcuser のパスワード:
pcuser@ubuntu:~$ ls -l /dev/ttyACM0
crw-rw-rw- 1 root dialout 166, 0  4月  8 11:40 /dev/ttyACM0
pcuser@ubuntu:~$

pcuser@ubuntu:~$ /home/pcuser/.arduino15/packages/esp32/tools/esptool_py/5.1.0/esptool --port /dev/ttyACM0 chip-id
esptool v5.1.0
Connected to ESP32-C3 on /dev/ttyACM0:
Chip type:          ESP32-C3 (QFN32) (revision v0.4)
Features:           Wi-Fi, BT 5 (LE), Single Core, 160MHz, Embedded Flash 4MB (XMC)
Crystal frequency:  40MHz
USB mode:           USB-Serial/JTAG
MAC:                ac:eb:e6:6d:6b:b0

Stub flasher running.

Warning: ESP32-C3 has no chip ID. Reading MAC address instead.
MAC:                ac:eb:e6:6d:6b:b0

Hard resetting via RTS pin...
pcuser@ubuntu:~$

pcuser@ubuntu:~$ ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0 4月 8 11:53 /dev/ttyACM0
pcuser@ubuntu:~$

pcuser@ubuntu:~$ sudo usermod -aG dialout pcuser
[sudo] pcuser のパスワード:
pcuser@ubuntu:~$

pcuser@ubuntu:~$ ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0  4月  8 11:53 /dev/ttyACM0
pcuser@ubuntu:~$ /home/pcuser/.arduino15/packages/esp32/tools/esptool_py/5.1.0/esptool --port /dev/ttyACM0 chip-id

 Usage: esptool [OPTIONS] COMMAND [ARGS]...

 Try 'esptool -h' for help
lq Error qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x Invalid value for '--port' / '-p': Path '/dev/ttyACM0' is not readable.     x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj

pcuser@ubuntu:~$

pcuser@ubuntu:~$ ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0  4月  8 11:53 /dev/ttyACM0
pcuser@ubuntu:~$ /home/pcuser/.arduino15/packages/esp32/tools/esptool_py/5.1.0/esptool --port /dev/ttyACM0 chip-id
esptool v5.1.0
Connected to ESP32-C3 on /dev/ttyACM0:
Chip type:          ESP32-C3 (QFN32) (revision v0.4)
Features:           Wi-Fi, BT 5 (LE), Single Core, 160MHz, Embedded Flash 4MB (XMC)
Crystal frequency:  40MHz
USB mode:           USB-Serial/JTAG
MAC:                ac:eb:e6:6d:6b:b0

Stub flasher running.

Warning: ESP32-C3 has no chip ID. Reading MAC address instead.
MAC:                ac:eb:e6:6d:6b:b0

Hard resetting via RTS pin...
pcuser@ubuntu:~$ id
uid=1000(pcuser) gid=1000(pcuser) groups=1000(pcuser),4(adm),20(dialout),24(cdrom),27(sudo),30(dip),46(plugdev),101(lxd)
pcuser@ubuntu:~$

#define LED_PIN (8)

void setup() {
  Serial.begin(9600);
  Serial.print("start");
  pinMode(LED_PIN, OUTPUT);

  while(1)
  {
    digitalWrite(LED_PIN, LOW);
    delay(500);

    digitalWrite(LED_PIN, HIGH);
    delay(100);
  }

}

void loop() {

  Serial.println("loop test");
  delay(3000);
}

#define LED_PIN (8)

void setup() {
  Serial.begin(9600);
  delay(2000); 
  Serial.print("start");
  pinMode(LED_PIN, OUTPUT);

  //while(1)
  //{
  //  digitalWrite(LED_PIN, LOW);
  //  delay(500);

  //  digitalWrite(LED_PIN, HIGH);
  //  delay(100);
  //}

}

void loop() {

  Serial.println("loop test");
  delay(3000);
}