The PACE 1039 Mini-Mite is a self-contained portable roll groover that is two tools in one! It features rugged construction with a larger top roller bearing, heavier top slide, and more material in the housing to make for more durability. And all hex drives on this robust unit are 15/16″ so one wrench fits everything!

The PACE 1039 Mini-Mite portable roll groover is simple to operate. It rolls grooves 1-1/4″ to 6.00″ Schedule 40 or thin wall steel pipe and/or 2.00″ – 8.00″ Copper tube on the scaffold or anywhere power is unavailable. Two models have the ability to chuck in a Rigid 300 – in just seconds (no gearbox removal).

PipeMan Products, Inc. TF: 1-877-PIPEMAN (747-3626)

Features

• Heavy Duty Cast CF8 304 Stainless Steel Body, Packing Gland, Yoke, Stemnut Retainer and Gate Clevis. Sizes larger than 24″ are available in a fabricated and welded design.
• Full Port
• 150 PSI CWP Rated
• Precision CNC machined valve body and stem
• ASTM a 240 304 Stainless Steel gate fully machined and surface ground. All edges are chamfered to extend packing  life and to provide a superior atmospheric seal.
• 14″ and larger valves are supplied with a ball bearing yoke bushing to reduce handwheel rimpull
• Braided Teflon Synthetic Packing is standard 3-11 PH rating
• BUNA N seat is standard 180 Deg. F.
• Locking fasteners are standard on all Fabricast valves
• Cast WCB Steel handwheel (weldable)
• Easily adapted to Air Cylinder, Hydraulic Cylinder, Bevel Gear, Lever or Electric Motor Operator (no welding required)

• Please contact us with any questions at 1-877-747-3626.

Additional features and benefits:

• Powder coated steel body (LPD-250) – 33 lbs.
• Connects to hydrant or fire hose
• Adaptable for low and high-volume flow
• Chlorine Levels 0-10 ppm, Flush Rate: 200-1,250 gpm
• Set-up Time: 1-3 minutes

Call us at 1-877-747-3626 for pricing and additional information

Lightweight and economical, the futuristic Kinetic Water Ram generates a shock wave that instantly pulverizes stoppages in 1-1/4” to 4” lines – yet won’t harm pipes. Quickly clear clogged sinks, toilets and tubs of grease, hair, sediment and debris.

Environmentally friendly, the compact, portable drain cleaning tool is cleaner than snakes – and safer than chemicals. It requires no electrical power or CO2 gas.

The Kinetic Water Ram uses a burst of compressed air that drives a shock wave (kinetic energy) through water to break up the stoppage. The shock wave bypasses vents and stacks to break-up clogs. You get instant impact with no pressure build-up. The built-in pump and
pressure gauge lets you choose the right amount of force for each job.

The Kinetic Water Ram is particularly useful when the stoppage is on the far side of a drum trap or series of tight bends, since the shock wave can travel around bends without losing its force.

The sleek and easy-to-handle Kinetic Water Ram is made of durable plated metal components. The unit comes in a sturdy carrying case with molded compartments for the drain cleaning tool and accessories.

Call PipeMan Products at 1-877-PIPEMAN (747-3626) with any questions or to order.

Specifications:
* The Cold-Shot CST-2 keeps pressurized systems operating while you make  repairs.
* Eliminates Draining the System and Avoid Shut-downs
* It freezes many type of liquids from 1/8″ to 2.00″ I.D. steel, copper, cast iron, aluminum, and plastic pipe
* It uses carbon dioxide (CO2) to freeze the pipe. 20lb. and 50lb. Dip-tube type cylinders are available
* It is faster and less expensive than “refrigerator-type” units and uses less CO2 than “bag-type” units
* In one-three minutes you’re ready to go to work on steel pipe or copper tubing

Contact us with any questions at 1-877-PIPEMAN (747-3626)

The Kwik-Snap 2500 Production Cast Iron Pipe Cutter is a powerful portable high volume soil pipe cutter for cast iron pipe. With its 3.5 second cutting cycle time from the electric hydraulic power, you can cut more pipe faster to get the job done quickly. It has a capacity of 1-1/2″ to 6.00″ OD pipe and its unique chain design cuts pipe fast, thus eliminating the need to reset for each cut on the same size pipe. It is quiet and reliable and easy to use.

The Powerful, Portable Solution to Your High Volume Soil Pipe Cutting Requirements

Features

• Pipe Cutter for cast iron soil pipe
• Soil pipe cutting capacity from 1-1/2″-6.00″ OD
• 3.5 second cutting cycle time
• Unique chain design eliminates the need to reset
• for each cut on the same size pipe
• Semi-automatic operation
• Significantly cleaner than sawing soil pipe… Virtually no airborne
• particles are generated when cutting
• Dual pressure switches for safe operation
• Extremely portable design, easily fits through any standard door way
• Replaceable cutter chain
• Electric/hydraulic power is quiet and reliable
• Built in handle and pneumatic tires for easy transport

• Powder coated steel body (LPD-250) – 33 lbs.
• Connects to hydrant or fire hose
• Adaptable for low and high-volume flow
• Chlorine Levels 0-10 ppm, Flush Rate: 200-1,250 gpm, Set-up Time: 1-3 minutes
• Optional flow measurement pitot with Dual Read Kem-X Gauge with quick connection
• Optional: Hitch and Tire for secure hold while flushing
• Optional: Dechlorination Tablets for LPD-250

What is the purpose of a Thermowell?
Thermowells are tubular fittings used to protect temperature sensors installed in industrial processes. They are typically installed in piping systems and are subject to both hydrostatic and aerodynamic forces. The thermowell protects the instrument (thermometer, thermocouple or resistance temperature detector) from the pressure, flow-induced forces, and chemical effects of the process fluid. They are installed into pipe, sumps or tanks so they can measure the temperature of the contents of a live line.

Thermowells are manufactured so they allow the temperature in the line to be transferred through its wall so it be measured. Thermowell units come in different lengths and size based on the size of the pipe and flow. They are normally inserted into a welded on threaded thermowell fitting that seals when the thermowell is installed. Thermowells are purchased by their required application, size, and insertion length into the pipe.

What type of fittings can be used for a live Thermowell installation?
Many companies use a Carbon Steel or Stainless Steel 2.0” x 1/2” NPT or 2.0” x 3/4” NPT Thermowell weld-on fittings for live line installation similar to the ThermFitTM weld-on fittings. The 2.0” outside threads allow for the use of standard 2.0” NPT adapter from a hot tap machine for installation.
The 1/2″ or 3/4″ internal threads allows for installation in small and large pipe applications as needed.

When doing a live installation, the most important part of the job is the Thermowell installation equipment. Thermowell units are made by many companies. To do a live installation you will need to be able to insert the Thermowell while the line is under pressure and thread it completely into the fitting so it will be permanently sealed.

Thermowell units come with different head sizes. Make sure you have socket adapters for these sizes 7/8”, 15/16”, 1.00”, 1-1/16”, 1-1/8”, and 1-1/4”. Your customer may purchase a wide variety of Thermowell units based on their needs for size of pipe and insertion length. Normally your customer
will determine the brand, style and length of the Thermowell.

The Benefits of Roll Grooving to Join Pipe Together

Roll grooving has been around for more than 50 years and is the most common preferred method of grooving pipe by professionals. It is a quick and cost effective way to mechanically join pipe. It can be used on different types of pipe, on many sizes and wall thicknesses.

How is the pipe groove formed? Roll grooving moves a small portion of the pipe wall orbitally by a cold forming process. The end of the pipe is placed between the roll set of a grooving machine. As the roll set closes, the pipe compresses as it rotates. This leaves a smooth recessed groove around the outside diameter and an indent on the inside diameter of the pipe being grooved. One the pipe is grooved, it can be connected by a Victaulic, Grinnell or other brand groove clamps.

Roll grooving is used on Schedule 5 through ANSI standard wall thickness carbon steel and stainless steel pipe and copper and aluminum pipe or tubing. It can be used up to Schedule 80 PVC pipe. Roll grooving machines are available from 3/4” up to 48” or larger.