http://rugerforum.net/ Ruger Forum: Ruger Forum for owners of Ruger pistols, Ruger revolvers, Ruger rifles, Ruger shotguns. Ruger Classifieds. en Sat, 25 Feb 2012 07:04:12 GMT vBulletin 60 http://cdn.rugerforum.net/images/styles/ruger/misc/rss.jpg http://rugerforum.net/ rugerforumhttp://feedburner.google.com http://feedproxy.google.com/~r/rugerforum/~3/-QDwoJiYV8I/48778-leupold-vx-ii-3-9x33mm-rimfire-efr-discontinued.html Sat, 25 Feb 2012 04:52:57 GMT I was told today that this scope is not currently being manufactured? Anyone else hear that? I bought the last one on my dealer's shelf and am thinking of another one... ]]> Optics Akboater http://rugerforum.net/optics/48778-leupold-vx-ii-3-9x33mm-rimfire-efr-discontinued.html http://rugerforum.net/optics/48778-leupold-vx-ii-3-9x33mm-rimfire-efr-discontinued.html http://feedproxy.google.com/~r/rugerforum/~3/ZZQw3SX36YM/48777-show-off-your-stuff.html Sat, 25 Feb 2012 04:40:36 GMT Hey all ruger fans and users, i thought I'd create a thread where you can show off all your stuff. Any thing like gun mods, your accuracy on targets, or tips for other newbies. Show anything that you are proud of. ]]> Ruger 10/22 Rimfire insertnamehere http://rugerforum.net/ruger-10-22-rimfire/48777-show-off-your-stuff.html http://rugerforum.net/ruger-10-22-rimfire/48777-show-off-your-stuff.html http://feedproxy.google.com/~r/rugerforum/~3/0MUxXzMS9HU/48776-3-same-serial-numbered-rugers.html Sat, 25 Feb 2012 04:27:04 GMT Anyone have any idea what the value of three Rugers, a M-77 in 308, A #1 in 308, and a Bearcat, all with the same serial number,"76", might be worth? ]]> Collectors JDP http://rugerforum.net/collectors/48776-3-same-serial-numbered-rugers.html http://rugerforum.net/collectors/48776-3-same-serial-numbered-rugers.html http://feedproxy.google.com/~r/rugerforum/~3/OrAVaOGQ6eA/48775-diy-pistol-magnet.html Sat, 25 Feb 2012 04:24:59 GMT I made up a inexpensive pistol magnet for my shop Ruger. I liked Quik Draw's magnet, but I could the use the $30 elsewhere.



The supplies I used were left overs from other projects, making my cost zero. However, the magnets I used are from a 2 pack of 60# magnets from Harbor Freight for $3. The hook and rivet are aluminum. I drilled the rivet out with a 1/4" bit.

I removed the tape-like covering on the bottom of the magnet and removed the adhesive with lighter fluid. There are special solvents just for adhesives if you prefer.



The coating on the magnet is 3 brushed coats of Plasti-Dip. All the metal areas covered nicely with no metal to metal contact with my Ruger.



The magnets are best installed horizontally, as the pistol would change its axis if placed on a vertical surface. I chose a hidden, horizontal area above my tool chest.



I used a 1/4" bolt through the shelf. Up top I added a 1/4" fender washer and finished with a nylock.





The Ruger is hidden completely from view unless someone is halfway up into the shop. The magnet provides a firm grip and does not wobble the pistol when shaking the wood shelf.

Access is immediate and precise.

Semper Fi


]]> Projects KnurledNut http://rugerforum.net/projects/48775-diy-pistol-magnet.html http://rugerforum.net/projects/48775-diy-pistol-magnet.html http://feedproxy.google.com/~r/rugerforum/~3/Jb3o2sf4QXk/48774-am-i-only-one-does-while-waiting-10-days.html Sat, 25 Feb 2012 04:12:05 GMT My god am i the only impatient/excited one to do this? im still countin the days to pick up my new sig sp2022(god i hate the waiting period law here)... My god am i the only impatient/excited one to do this? im still countin the days to pick up my new sig sp2022(god i hate the waiting period law here) and have looked at every web site and gun shop for accessories for it. I already ordered a stainless guide rod, 2 more clips and went back to the gun shop to bring home my light/laser that i bought with the gun. gonna start collectin ammo tomorrow. god this is the longest week of my life! please tell me im not crazy and this is normal. :confused: ]]> bad89coupe http://rugerforum.net/pistols-revolvers/48774-am-i-only-one-does-while-waiting-10-days.html http://rugerforum.net/pistols-revolvers/48774-am-i-only-one-does-while-waiting-10-days.html http://feedproxy.google.com/~r/rugerforum/~3/QOvJddRmGsE/48773-3-same-serial-numbered-rugers.html Sat, 25 Feb 2012 04:05:31 GMT Anyone have any idea what 3 Rugers, M77-308, #1-308, and a Bearcat, all with serial #76 may be worth? Anyone have any idea what 3 Rugers, M77-308, #1-308, and a Bearcat, all with serial #76 may be worth? ]]> New Users JDP http://rugerforum.net/new-users/48773-3-same-serial-numbered-rugers.html http://rugerforum.net/new-users/48773-3-same-serial-numbered-rugers.html http://feedproxy.google.com/~r/rugerforum/~3/xBCjDGf1X0E/48771-wanted-mark-iii-factory-box.html Sat, 25 Feb 2012 03:58:03 GMT I don't care if it's grey or green or what ever, as long as it'll hold my MKIII Hunter. If you have one in great condition/new, shoot me an email and let me know your terms and price and I'll get back. Let me know asap, since I am watching some on feebay. Thanks

email = mmcconnell_00 at yahoo dot com ]]> MKIII4life http://rugerforum.net/parts-accessories/48771-wanted-mark-iii-factory-box.html http://rugerforum.net/parts-accessories/48771-wanted-mark-iii-factory-box.html http://feedproxy.google.com/~r/rugerforum/~3/s-5tvBfsGh0/48769-power-custom-half-cock-hammer-trigger-question.html Sat, 25 Feb 2012 03:51:36 GMT I installed a PC half cock hammer and trigger in my 45 Colt Blackhawk, and everything works fine. Had to refit the hand to adjust the timing, and... I installed a PC half cock hammer and trigger in my 45 Colt Blackhawk, and everything works fine. Had to refit the hand to adjust the timing, and that was about it.
One thing I noticed is the cylinder won't rotate when the hammer is on half cock and the loading gate closed.
Any ideas?
The cylinder latch bolt seems to drop too soon and is back out by the time you reach half cock. ]]> Gunsmithing bchannell http://rugerforum.net/gunsmithing/48769-power-custom-half-cock-hammer-trigger-question.html http://rugerforum.net/gunsmithing/48769-power-custom-half-cock-hammer-trigger-question.html http://feedproxy.google.com/~r/rugerforum/~3/pWqCL0bh0Ks/48768-10-22-deluxe-sportster.html Sat, 25 Feb 2012 03:23:21 GMT At the range today the range owners dad saw my 22 and said it was a sportster deluxe.. What does that mean to me? At the range today the range owners dad saw my 22 and said it was a sportster deluxe.. What does that mean to me? ]]> Ruger 10/22 Rimfire Joey Kelly http://rugerforum.net/ruger-10-22-rimfire/48768-10-22-deluxe-sportster.html http://rugerforum.net/ruger-10-22-rimfire/48768-10-22-deluxe-sportster.html http://feedproxy.google.com/~r/rugerforum/~3/zny4haMMQZs/48765-new-guy.html Sat, 25 Feb 2012 02:50:30 GMT Hi everybody, I'm the new guy in this forum. Located in north west ohio. ]]> New Users kirshcrete http://rugerforum.net/new-users/48765-new-guy.html http://rugerforum.net/new-users/48765-new-guy.html http://feedproxy.google.com/~r/rugerforum/~3/hGETtkV31ZA/48764-new-old-sr1911.html Sat, 25 Feb 2012 01:59:11 GMT I picked up my new SR1911 last night form my FFL. While inspecting the gun, I was surprised when I looked at the Test Casing Envelope. the test shot... I picked up my new SR1911 last night form my FFL. While inspecting the gun, I was surprised when I looked at the Test Casing Envelope. the test shot was fired on 4-12-11. How can a gun that is in such short supply be in the system (Ruger inventory, or Distributor, or ?) for 10 months.
It doesn't bother me, but I am curious as to where this gun has been. The dealer got 4 in at the same time. I don't know the dates for the other units. i guess getting one mfg. in 2011 is a good thing (100 years) ]]> Ruger Pistols 96LT4CE http://rugerforum.net/ruger-pistols/48764-new-old-sr1911.html http://rugerforum.net/ruger-pistols/48764-new-old-sr1911.html http://feedproxy.google.com/~r/rugerforum/~3/nT52R81QtmI/48757-remington-mil-contract-22lr-40gr-lrn-114-95-5000rds-shipped.html Sat, 25 Feb 2012 01:24:56 GMT This deal is $84.95 shipping included through CMP for club members. ... This deal is $84.95 shipping included through CMP for club members.


https://estore.odcmp.com/store/catal...4=&note5=&max= ]]> Ammo Dump WeldonHunter http://rugerforum.net/ammo-dump/48757-remington-mil-contract-22lr-40gr-lrn-114-95-5000rds-shipped.html http://rugerforum.net/ammo-dump/48757-remington-mil-contract-22lr-40gr-lrn-114-95-5000rds-shipped.html http://feedproxy.google.com/~r/rugerforum/~3/hbzAC5bvBvE/48755-new-sr22p-lasermax-unimax-micro-laser-range-report.html Sat, 25 Feb 2012 01:18:26 GMT Well, I can truly say that the SR22P with the Lasermax Uni-Max Micro Laser works as good as it looks! Took the pistol to the range today during my... Well, I can truly say that the SR22P with the Lasermax Uni-Max Micro Laser works as good as it looks! Took the pistol to the range today during my lunch hour, and I can truly report that the SR22 and the laser shoots as accurately as the shooter can manage. Very tight groups at 25 feet and 33 feet, my preferred distances for pistols.

Incidentally, I adjusted the laser at home to correspond to a military sight picture at 25 feet, before going to the range. The result was that I had no need whatever to adjust the laser once I got to the range.

I am also happy to report that the Uni-Max Micro was still tight on the rail after 240 rounds, and was still dead-on zeroed. No dirt on the lens either; the laser was still clean after 240 rounds.

The Uni-Max Micro and SR22P seem to be a really nice combination!

]]> Range Reports Redleg http://rugerforum.net/range-reports/48755-new-sr22p-lasermax-unimax-micro-laser-range-report.html http://rugerforum.net/range-reports/48755-new-sr22p-lasermax-unimax-micro-laser-range-report.html http://feedproxy.google.com/~r/rugerforum/~3/qQ5J__1PBlw/48753-f-s-nos-shoemaker-basket-weave-snubby-combat-holster.html Sat, 25 Feb 2012 01:02:20 GMT F/S New Old Stock Tex Shoemaker Basket Weave High Ride Thumb Snap Cross Draw Holster for Smith & Wesson K or L frame revolvers with 2 1/2 inch barrels and Ruger Speed Six with 2 3/4 inch barrels. A picture is below, revolver is not for sale.
Asking $40 plus shipping and insurance.
robbtsroost@yahoo.com

]]> rooster http://rugerforum.net/parts-accessories/48753-f-s-nos-shoemaker-basket-weave-snubby-combat-holster.html http://rugerforum.net/parts-accessories/48753-f-s-nos-shoemaker-basket-weave-snubby-combat-holster.html http://feedproxy.google.com/~r/rugerforum/~3/reikxlaPCKg/48752-time-again.html Sat, 25 Feb 2012 01:02:18 GMT Springs all but knocking on the door so it's getting closer to hitting the ranges again. They were closed most of last year to re-work them all. Have a bunch of builds that gotta get their first shots and yet I'm now thinking there should be another ready to bring as well. :D Have one barrel still awaiting getting drilled & tapped but maybe yet another could begin it's formation. Stock is here and I have receivers to strip (need a silver one for this planned build). Barrel is all decided on too. A decision on optics would be easy so maybe his weekend or next, I'll bite the bullet and place some orders. :) ]]> Ruger 10/22 Rimfire BlkHawk73 http://rugerforum.net/ruger-10-22-rimfire/48752-time-again.html http://rugerforum.net/ruger-10-22-rimfire/48752-time-again.html