Samsung Software Hardware Solution

Free download Papago X8.5-X9 - M9 for android - Maps Update

2012-11-21T10:44:00.001-08:00

>> Download << : Maps from MFM (4 July 2012) Malaysia , Singapore & Brunei

>> Download << : Maps from MFM (9 August 2012) Malaysia , Singapore & Brunei

PAPAGO	X8.5-X9 - M9 for Android
System Requirement	Supported O/S up to : Android 4.0 Handset Requirement: CPU 500Mhzor above Flash 5MB above
Compatible Mobile Model:	Htc Sensation ( O.S 4.0.3 ) - can run from external Motorola Atrix ( O.S 2.3.6 ) - only run from internal Motorola Razr ( O.S 2.3.6 ) - only run from internal Samsung Note Samsung Galaxy S Samsung Galaxy S2 HTC Desire HD HTC Desire Z HTC Desire S Samsung Galaxy Tab 7 Samsung Galaxy Tab 7 Plus Samsung Galaxy Tab 8 Samsung Galaxy Tab 10 Samsung Galaxy Mini II Motorola Defy Mini
Supported Screen Resolution:	240 x 320 240 x 400 320 x 240 320 x 480 400 x 240 480 x 320 480 x 800 480 x 854 540 x 960 600 x 1024 800 x 480 800 x 1232 800 x 1280 854 x 480 960 x 540 1024 x 600 1280 x 752 1280 x 800

How to Update Samsung Galaxy Apollo I5800 Flash tool & Flasher

2012-11-21T10:14:00.003-08:00

Samsung Galaxy Apollo I5800 Flash tool & Flasher

Run Samsung I5800 Galaxy 3 Downloader.
Click OPS button and select: apollo_0531.ops
Click BOOT button and select: I5800xxxxx-REV02-Bootloader-low-CL794643.tar.md5
Click PHONE button and select: I5800xxxxx_PHONE.tar.md5
Click PDA button and select: I5800xxxxx-REV02-PDA-CL794643.tar.md5
Click CSC button and select: I5800Oxxxxx-CSC-MULTI-OXX.tar.md5
Check these options: Auto Reboot, Protect OPS, Reset Time
Put the phone into download mode: Press Volume Down Key + OK Key + Power Key
Connect USB cable to phone and PC.
Make sure the program detect the COM the phone takes.
Press Start button and wait till all is done.
Turn On the phone and do full reset by this Code: *2767*3855#.

Apollo I5800 Firmware Update List

Samsung Galaxy Apollo I5800 Firmware Update List

2012-11-21T10:11:00.000-08:00

Some things to keep in mind :

Check your firmware by typing *#1234#
Check your simlock before you flash!

Zip archive password: ## samfirmware.com or # samsung-firmwares.com

Europe - I5800 Firmwares






















Download PDA Version Release Date CSC version Country / Carrier
  


Link

I5801BUJE8 2.1 2010 May	 
  


Link

I5801BVJE8 2.1 2010 May		 
  


Link

I5800XXJF8 # 2.1 2010 June		 
  


Link

I5800XWJG3 ## 2.1 2010 July		 
  


Link

I5800XXJG6 # 2.1 2010 July		 
  


Link

I5800XXJG6 ## 2.1 2010 July		 
  


Link

I5800XWJG7 2.1 2010 July	 
  


Link

I5800XWJG9 ## 2.1 2010 July 
  


Link

I5801BVJG3 # 2.1 2010 July 
  


Link

I5800BOJG7 # 2.1 2010 July 
  


Link

I5800XXJH1 ## 2.1 2010 August	 
  


Link

I5800XWJH2 # 2.1 2010 August		 
  


Link

I5800XWJH3 ## 2.1 2010 August	 
  


Link

I5800BOJH1 ## 2.1 2010 August	 
  


Link

I5800XXJI2 ## 2.1 2010 September		 
  


Link

I5800XWJI4 ## 2.1 2010 September		 
  


Link

I5800XXJK1 ## 2.1 2010 November 
  


Link

I5801BVJK4 ## 2.1 2010 November 


































Download PDA Version Release Date CSC version Country / Carrier
  


Link

I5800BOJPC ## 2.2 
  


Link

I5801BVJPE ## 2.2 I5801FTMJP9 France (Orange)	
  


Link

I5801BVJPE ## 2.2 I5801ORAJP9 United Kingdom (Orange)	
  


Link

I5800XWJPE ## 2.2 I5800SERJP1 Russia	
  


Link

I5800XWJPE ## 2.2 I5800BSEJP1 Belgium	
  


Link

I5800XWJPE ## 2.2 I5800PROJP1 Belgium / Luxemburg	
  


Link

I5800XXJPN ## 2.2 I5800OXFJP8		 
  


Link

I5800XXJPN ## 2.2 I5800OXXJPN		 
  


Link

I5800XWJPF ## 2.2 I5800XENJP1 Netherlands	
  


Link

I5800XWJPI ## 2.2 
  


Link

I5800XXJPQ ## 2.2 
  


Link

I5800XXJPS ## 2.2 I5800XENJP1 
  


Link

I5800XXJP8 ## 2.2 2010 November 
  


Link

I5800XXJP9 ## 2.2 2010 November 
  


Link

I5800XXJPA ## 2.2 2010 November 
  


Link

I5800XXJPB ## 2.2 2010 December 
  


Link

I5800XXJPF ## 2.2 2010 December 
  


Link

I5800BOJP6 ## 2.2 2010 December 
  


Link

I5801BVJP9 ## 2.2 2011 January 
  


Link

I5800XXJPM ## 2.2 2011 February 
  


Link

I5800XWJPD ## 2.2 2011 February 
  


Link

I5800POJPE ## 2.2 2011 March I5800SFRJP7 France (SFR)	
  


Link

I5800XWJPI ## 2.2 2011 May I5800MOTJP3 Slovenia (Mobitel)	
  


Link

I5800XWJPK ## 2.2 2011 June I5800BSE 
  


Link

I5800XWJPI ##	 2.2 2011 May I5800OMNJP3 Italy (Vodafone)
  


Link

I5800XXJPU ##	 2.2 2011 November	 I5800OXXJPO Spain
  


Link

I5800BAJP6	 2.2 2012 February I5800ATLJP5 Spain (Vodafone)
  


Link

I5800XXJPQ 2.2 2011 June I5800OXFJP9 Romania (Cosmote)
  


Link

I5800XWJPD 2.2 2011 March I5800PLSJP4 Poland (PLUS)
  


Link

I5800XWJPD 2.2 2011 March I5800TRGJP4 Austria (Telering)

Download	PDA	Version	Release Date
Link	I5801BUJE8	2.1	2010 May
Link	I5801BVJE8	2.1	2010 May
Link	I5800XXJF8 #	2.1	2010 June
Link	I5800XWJG3 ##	2.1	2010 July
Link	I5800XXJG6 #	2.1	2010 July
Link	I5800XXJG6 ##	2.1	2010 July
Link	I5800XWJG7	2.1	2010 July
Link	I5800XWJG9 ##	2.1	2010 July
Link	I5801BVJG3 #	2.1	2010 July
Link	I5800BOJG7 #	2.1	2010 July
Link	I5800XXJH1 ##	2.1	2010 August
Link	I5800XWJH2 #	2.1	2010 August
Link	I5800XWJH3 ##	2.1	2010 August
Link	I5800BOJH1 ##	2.1	2010 August
Link	I5800XXJI2 ##	2.1	2010 September
Link	I5800XWJI4 ##	2.1	2010 September
Link	I5800XXJK1 ##	2.1	2010 November
Link	I5801BVJK4 ##	2.1	2010 November

Download	PDA	Version	Release Date	CSC version	Country / Carrier
Link	I5800BOJPC ##	2.2
Link	I5801BVJPE ##	2.2		I5801FTMJP9	France (Orange)
Link	I5801BVJPE ##	2.2		I5801ORAJP9	United Kingdom (Orange)
Link	I5800XWJPE ##	2.2		I5800SERJP1	Russia
Link	I5800XWJPE ##	2.2		I5800BSEJP1	Belgium
Link	I5800XWJPE ##	2.2		I5800PROJP1	Belgium / Luxemburg
Link	I5800XXJPN ##	2.2		I5800OXFJP8
Link	I5800XXJPN ##	2.2		I5800OXXJPN
Link	I5800XWJPF ##	2.2		I5800XENJP1	Netherlands
Link	I5800XWJPI ##	2.2
Link	I5800XXJPQ ##	2.2
Link	I5800XXJPS ##	2.2		I5800XENJP1
Link	I5800XXJP8 ##	2.2	2010 November
Link	I5800XXJP9 ##	2.2	2010 November
Link	I5800XXJPA ##	2.2	2010 November
Link	I5800XXJPB ##	2.2	2010 December
Link	I5800XXJPF ##	2.2	2010 December
Link	I5800BOJP6 ##	2.2	2010 December
Link	I5801BVJP9 ##	2.2	2011 January
Link	I5800XXJPM ##	2.2	2011 February
Link	I5800XWJPD ##	2.2	2011 February
Link	I5800POJPE ##	2.2	2011 March	I5800SFRJP7	France (SFR)
Link	I5800XWJPI ##	2.2	2011 May	I5800MOTJP3	Slovenia (Mobitel)
Link	I5800XWJPK ##	2.2	2011 June	I5800BSE
Link	I5800XWJPI ##	2.2	2011 May	I5800OMNJP3	Italy (Vodafone)
Link	I5800XXJPU ##	2.2	2011 November	I5800OXXJPO	Spain
Link	I5800BAJP6	2.2	2012 February	I5800ATLJP5	Spain (Vodafone)
Link	I5800XXJPQ	2.2	2011 June	I5800OXFJP9	Romania (Cosmote)
Link	I5800XWJPD	2.2	2011 March	I5800PLSJP4	Poland (PLUS)
Link	I5800XWJPD	2.2	2011 March	I5800TRGJP4	Austria (Telering)

Asia - I5800 Firmwares






Download PDA Version Release Date CSC version Country / Carrier
  


Link

I5801DXJG5 # 2.1 2010 July 
  


Link

I5801DDJG6 # 2.1 2010 July 








Download PDA Version Release Date CSC version Country / Carrier
  


Link

I5801DDJP2 ## 2.2 
  


Link

I5801ZFJPE ## 2.2 2011 February 
  


Link

I5801ZHJPF ## 2.2 2011 March 
  


Link

I5801DXJPC ## 2.2 2011 June

Download	PDA	Version	Release Date	CSC version	Country / Carrier
Link	I5801DXJG5 #	2.1	2010 July
Link	I5801DDJG6 #	2.1	2010 July

Download	PDA	Version	Release Date
Link	I5801DDJP2 ##	2.2
Link	I5801ZFJPE ##	2.2	2011 February
Link	I5801ZHJPF ##	2.2	2011 March
Link	I5801DXJPC ##	2.2	2011 June

North America - I5800 Firmwares







Download PDA Version Release Date CSC version Country / Carrier



Link

I5800LVIJE3 2.1 2010 May 



Link

I5800LVIJG7 ## 2.1 2010 July 



Link

I5800LVIJG8 # 2.1 2010 July 





Download PDA Version Release Date CSC version Country / Carrier



Link

I5800DTLKDA ## 2.2 2011 April

Download	PDA	Version	Release Date
Link	I5800LVIJE3	2.1	2010 May
Link	I5800LVIJG7 ##	2.1	2010 July
Link	I5800LVIJG8 #	2.1	2010 July

Download	PDA	Version	Release Date	CSC version	Country / Carrier
Link	I5800DTLKDA ##	2.2	2011 April

Samsung Galaxy Celox I9210 firmware Update list

2012-11-21T09:53:00.000-08:00

Some things to keep in mind :

Check your firmware by typing *#1234#
Check your simlock before you flash!
Make sure you make necessary data backup !
Full reset : *2767*3855#

Some firmwares require password to unpack. Try the following passwords depending on the sign :

## Password is samfirmware.com
# Password is samsung-firmwares.com
* file is not complete!

Europe - I9210 Firmwares








Link

I9210XXLB1 2.3.6 2012 February I9210COVKL4 Sweden

Link

I9210XXLC2	 2.3.6 2012 March I9210COVLC1 Sweden

Link

I9210XXLC2	 2.3.6 2012 March I9210TMNLB3 Portugal (TMN)

Link

I9210XXLPJ 4.0.4 2012 November I9210COVLP5 Sweden
Link I9210XXLPH 4.0.4 2012 September I9210TLALP2 Sweden

ASIA - I9210 Firmwares






 Link

I9210ZHLH2 2.3.6 2012 August I9210ZZHLH2 Hong Kong

All Stock And Original Firmwares Samsung Android

2012-11-21T02:31:00.002-08:00

Samsung Entering Recovery Mode Image

2012-11-16T01:19:00.000-08:00

turn off your phone "Power off".

Entering recovery mode on Samsung Galaxy: (Young CDMA SCH-i509 and Chinese Version CDMA SCH-i509)

- Make shure you start the phone like this : Long press and hold the (Volume up Button) + (Power Button)

Entering recovery mode on Samsung Galaxy: (Gravity Smart SGH-T589/R/W ) (551 GT-i5510/B/L/M/T) (Pro GT-B7510)

-Make shure you start the phone like this : Long press and hold the (T Button) + (Power Button)
[

Entering recovery mode on Samsung Galaxy: (Ace GT-S5830/B/C/D/L/M/T) (Gio GT-S5660/M/L/V) (Fit GT-S5670/B/L) (Mini GT-S5770/B/L, GT-S5771)
- Make shure you start the phone like this : Long press and hold the (Power Button) + (Home Button)

Entering recovery mode on Samsung Galaxy : (Ace GT-S5830i) (Mini GT-S5570I) (W GT-I8150/B) (Xcover GT-S5690/I/M/L/R) (Young GT-S5360/B/L/T, GT-S5363, GT-S5369) (Y-Duos GT-S6102/B) (Y-Pro GT-B5510/B/L) (Y-Pro Duos GT-B5512/B) (M-Pro GT-B7800) (Pocket GT-S5300/B)

- Make shure you start the phone like this :

Method 1:
Long press and hold the (Volume up Button) + (Home Button) + (Power button)

* If for some reason with Method 1 the phone reboot always when entering recovery mode (depends on the models) please use the Method 2 option

Method 2:
Long press and hold the (Volume up Button) + (Home Button) + (Power button) when you see the samsung logo for the second time release (Home Button) and press again the (Home Button) and after that release the (Power button)

How to Install XXLSJ Android 4.1.2 Jelly Bean on Galaxy S2 I9100

2012-11-16T00:54:00.000-08:00

How to Install XXLSJ Android 4.1.2 Jelly Bean on Galaxy S2 I9100

We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy S II to XXLSJ Android 4.1.2 Jelly Bean. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
Please read every line carefully and make sure you read the entire tutorial once before actually performing it on your phone.

To Remember:

This Android 4.1.2 XXLSJ tutorial is only for Samsung Galaxy S2 I9100. Please don’t try this on any other variants of the phone.
This is a pre-release test firmware leaked online, not an official update or full firmware by Samsung.
Make sure you backup all your data in your phone before proceeding.

Rooting Warning: This is an official Android 4.1.2 build XXLSJ update for Galaxy S II I9100, which means you will lose root as soon as you install this update. You will again have to root Galaxy S2 to gain full system access and be able to install root apps again. See here: How to Root XXLSJ Android 4.1.2 on Galaxy S2 I9100.
Complete Step-By-Step Instructions:
Step 1 - Download Android 4.1.2 I9100XXLSJ for Galaxy S2 to your computer and extract the zip file.
Step 2 - Download ODIN v1.85 which will help you to install Android 4.1.2 on Samsung Galaxy S2 I9100.
Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy S2 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

Click on ‘PDA’ and select file with ‘CODE’ or ‘HOME’ in its name.
Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy S II has now been updated to Android 4.1.2 build XXLSJ software update. Go to Settings > About phone to verify what build have you installed.
Hit +1 or LIKE to thank us!

Tutorials Updateing Galaxy S2 I9100 to XXLSJ Android 4.1.2 Jelly Bean Leaked Official Test Firmware

2012-11-16T00:52:00.000-08:00

As you continue reading below, we will guide you through the entire process of how to update Galaxy S2 I9100 to XXLSJ Android 4.1.2 Jelly Bean using ODIN. This latest I9100XXLSJ firmware has been leaked online – it is a pre-release test firmware. Make sure you backup all your data before trying this and you know what you are doing. Let’s continue with the tutorial below.

Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial
Galaxy S2 I9100 XXLSJ Android 4.1.2 New Features:

Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
New TouchWiz Nature UX (Same UI as of the Galaxy S III and Galaxy Note II)
Samsung’s Cloud services
Direct Call, Smart Stay and Pop-up Play Features
New Widgets From the Galaxy S III
2 Home screen modes
New Notifications bar
Google Now

Android 4.1.2 XXLSJ Firmware Details:
Android Version: 4.1.2 – JZO54K (Jelly Bean)
PDA: I9100XXLSJ
CSC: I9100OXXLS1
MODEM: I9100XXLS6
Changelist: 462349
Build Date: 6th November 2012
Make sure you have installed all your USB drivers for the Samsung Galaxy S II to connect it with the computer. Download Samsung Galaxy S2 USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.
1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.
2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery,
3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

Backup your SMS messages.
Backup Contacts, Gmail and Google Data.
Backup Call History.
Backup WhatsApp Messages.
Backup APN Settings: GPRS, 3G, MMS Settings.

Data can also be backed up using Samsung KIES for their devices, but if you backup data manually, you get more options what top choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.
4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.
Now, let’s proceed with the tutorial on the next page and update Galaxy S2 I9100 to XXLSJ Android 4.1.2 Jelly Bean leaked firmware.

Look Complete Tutorials update Galaxy S2 I9100 to XXLSJ Android 4.1.2 Jelly Bean leaked firmware.

How to Enable USB Debugging in Android Phones

2012-11-16T00:48:00.001-08:00

How to Enable USB Debugging in Android 4.0 Phones

Here is how you can enable USB debugging on phones that are on Android 4.0 or later.

Go to Settings.
Scroll down and tap “Developer options”.
Now check “USB debugging” from there.

That’s it. USB debugging is now enabled on your Android phone.

How to Enable USB Debugging in Android 2.3 Phones

Here is how you can enable USB debugging on phones that are on Android 2.3 or earlier.

Go to Settings.
Tap on “Applications”.
Then go to “Development”.
Now check “USB debugging” from there.

That’s it. USB debugging is now enabled on your Android phone.

Galaxy Y Duos Pro B5512 & B5512B Firmware List

2012-11-13T22:56:00.001-08:00

Samsung Galaxy Y Pro Duos B5512 Firmware List

Welcome to the Samsung Galaxy Y Pro Duos B5512 firmware page list. Here you will find the latest firmware version.

We will sort the list by continents : EUROPE, ASIA, ARABIC, AMERICA/AUSTRALIA,TURKEY, PROVIDER firmwares

TIPS / Some things to keep in mind :

Check your firmware by typing *#1234#
Check your simlock before you flash!
Remove Simcard and SD card when you gonna flash.
Make always a hard reset after flashing by code: *2767*3855#

Some firmwares require password to unpack. Try the following passwords depending on the sign :

## Password is samfirmware.com
# Password is samsung-firmwares.com
* file is not complete!

Flash Program.
Odin inside firmware.

EUROPE B5512 Firmwares

Download	PDA	Version	Release Date	CSC version	Country / Carrier
Link	B5512XXKL3 ##	2.3.6	2011 December	B5512OXEKL3
Link	B5512XXKL7 ##	2.3.6	2011 December	B5512OXEKL7
Link	B5512XXLD2	2.3.6	2012 April	B5512OXALD2	Open Europe
Link	B5512XXLF1		2012 June	B5512OXALF1	Europe Open

MIDDLE EAST B5512 Firmwares

Download	PDA	Version	Release Date	CSC version	Country / Carrier
Link	B5512JPLE1	2.3.6	2012 May	B5512OJPLD1	Egypt
Link	B5512JPLF3	2.3.6	2012 July	B5512OJPLD1	Egypt
Link	B5512JPLE1	2.3.6	2012 May	B5512OJPLD1	Iran
Link	B5512JPLI1	2.3.6	2012 September	B5512OJPLD1	Iran
Link	B5512JPLE1	2.3.6	2012 May	B5512OJPLD1	Saudi Arabia (JED)
Link	B5512JPLE1	2.3.6	2012 May	B5512OJPLD1	United Arab Emirates
Link	B5512JPLI1	2.3.6	2012 September	B5512OJPLD1	United Arab Emirates

AFRICA B5512 Firmwares

Download	PDA	Version	Release Date	CSC version	Country / Carrier
Link	B5512JPLE1	2.3.6	2012 May	B5512OJPLD1	Morocco (MWD)
Link	B5512JPLI1	2.3.6	2012 September	B5512OJPLD1	Morocco (MWD)

SOUTH AMERICA GT-B5512B Firmwares

Download PDA Version Release Date CSC version Country / Carrier
Link
B5512BVJLD2 2.3.6 2012 April B5512BZTOLD3 Brazil
Link
B5512BVJLD2 2012 April B5512BZTOLD3 Brazil
Link
B5512BVJLF1 2012 June B5512BZTOLF1 Brazil

Download	PDA	Version	Release Date	CSC version	Country / Carrier
Link	B5512BVJLD2	2.3.6	2012 April	B5512BZTOLD3	Brazil
Link	B5512BVJLD2		2012 April	B5512BZTOLD3	Brazil
Link	B5512BVJLF1		2012 June	B5512BZTOLF1	Brazil

Tutorials How to Root Samsung Galaxy Pro

2012-11-13T22:45:00.000-08:00

Pre Root Instructions:

Warranty will get void once you root Samsung Galaxy Pro, though warranty can be claimed once you un root your device.
In an unlikely event you may lose all the data which is present in your Samsung Galaxy Pro, so it’s recommended to create a backup of all the data like call log, messages, applications, music, videos and other data which is present in the phone, so that you can restore the same once the rooting process is completed.
Ensure that you have the installed the latest framework in your computer or also you can install the latest version of KIES which is dubbed as KIES 2 so as to ensure that all the required drivers are installed successfully.
It’s very important to maintain a minimum battery power of 50% so as to facilitate the smoother rooting process or else there is a high possibility that your device may end up turning completely off in the process of rooting.
Since the process of rooting will be taking place, all the APN settings with which you access the Internet will be wiped off completely, so ensure that you have noted all the required settings for accessing the internet so that you can configure them again back once the device gets rooted. Also, additionally ensure that you have also backed up the MMS Settings and other settings as in an unlikely event sometimes you may end up losing all the 3G Settings as well as the APN or MMS settings in the process of Rooting the device.
Last but not the least follow the below mentioned instructions carefully so as to save your phone from being turned into an expensive paper weight.

Procedure to Root Samsung Galaxy Pro using Z4 Root:

First up, download the Z4 Root application from here in your computer and after that you will have to extract the same, in the process of extraction if it prompts you to enter the password then enter the password as androidadvices.com. Its highly recommended to not to download this zip file of Z4 Root from your phone as it’s a password protected file which cannot be extracted most of the time in your Android phone.
So, once you extract the Z4 Root APK file, you will have to transfer the same into your phone by connecting your phone with the computer by connecting using the USB cable. Please note that place this file in the path of \sd card and not into any other folder or else you may face it difficult to find the same.
After copying the file, from your phone just open the same so that the application gets installed successfully in your phone after which you just need to open the same after which you will see the screen as shown below.

Now, as soon as the installation of Z4 Root is completed, you will have to tap on the application to open the same after which you will see two options that is temporary root and another one will be the Permanent Root. From this, you will have to tap on the “Permanent Root” after which the device will be rooted in seconds. Do, note that while the process is running don’t interrupt its processes or else you will have to repeat the rooting process, and also its not recommended to choose the temporary root as if you do the temporary root then the device will get un rooted just by a simple restart as shown in the below screen shot.

Now, after choosing the option from the two, the process of rooting the device will be processed after which you will see that the phone will be restarted, please note that if you choose the temporary root option then the device will be restarted to fix the rooting in your phone. It’s always recommended to use the Permanent root as if you opt for the temporary root, then the device will be un rooted as soon as you restart the device. Please note that as soon as the rooting process is successful, you will see that the “Superuser” icon will be created in your application which is in the skull shaped. So, there you go you have now successfully rooted your phone and you are ready to customize the phone the way you want it.

Just in case if you are unable to see the Super user icon then it means that the device hasn’t been rooted and you will have to root the device again by following the above instructions from the start. Despite repeating the above process if you are still unable to root your phone then you will have to follow the below procedure to root your phone.
Procedure to Root Samsung Galaxy Pro using Super Click:

So, the second method with which you can root your Samsung Galaxy Pro is by using the Super One Click Root which we will see in the due course of this article. Unlike the Z4 Root which you will have to shift the APK file in your phone and then you had to open the same in your phone to start the rooting process, this is one of the hassle free methods which can be controlled straight from your computer. This method of rooting is much simpler than the ons which are available like HRoot or any such tools for rooting which may be confusing at times to the users who are new to Android.
Next up, before proceeding you will have to install the Java SDK, not just Runtime but the full SDK which you can download from here which also supports framework which is required to run the Android SDK. It’s very important to install this SDK is that to root the device the computer will be requiring the drivers so that you can easily root the phone using the Super One click.

For using this software application, first you will have to download the PC version of Super One Click software and then you will have to install the same.Please note that while extracting the downloaded zip file of the Super One Click if you are prompted to enter in the password then you will have to enter in the password as androidadvices.com. After extraction, you will have to click on the file which is named as Super One Click Root as shown in the below screen shot.
After installing, you need to first set your device in the USB debugging mode and in this process make sure that you don’t mount the SD Card or else whole data will get lost or even some major issue can arise.

After this open the installed Super One click software and then you will have to connect the USB cable to your phone and computer, if you are unable to get it run then you can try in the recovery mode. Make sure that all the drivers all installed through your PC suites of your respective Android phones. That’s it, after connecting, all you need to do is to just select the option which you wish to perform and that’s it you have now successfully finished rooting, shell rooting, un rooting as well as allowing Non Market apps (requires rooting) very easily all in just one click.
Please note that you will have to reconfigure the APN settings after updating the firmware to access the data services and the Internet services as all the Internet APN settings will be reset. You will have to contact your Service provider which is Verizon Wireless to get more info on the APN Settings. Not to forget also configure the MMS Settings. Do let us know if you face any issues while rooting the device as we will see to it that the issues are solved. Just in case if the rooting process is interrupted in the middle then you just need to re follow the whole procedure from the start to root your Samsung Galaxy Pro phone.

Attached Files

SuperOneClickv1.9.1-ShortFuse.zip (1.61 MB )
Android SDK.zip (184 Bytes )
z4root.1.3.0.zip (939.7 KB )

Android 4.2 OTA Update Rolling Out to Nexus 4 and Nexus 10. Brings Added Features

2012-11-13T22:23:00.000-08:00

Happy Nexus eve everyone! The Nexus 4 and Nexus 10 are just hours away from being released to the public, and Google has wasted no time on getting some added Android 4.2 features to go with these flagship devices. These updates were confirmed by the boys over at Android Police, who went inside their “Check updates” menu and sure enough, delicious treats were waiting.

The two major added features with this update, are the multiple user accounts on the Nexus 10, and the lockscreen widgets on both the Nexus 4 and the 10. The lockscreen widgets is what I am most looking forward in Android 4.2, because as you know, I am a huge widget head. More widgets, the more I am happy. Take a look at the screen shots below to see the beautiful added features.

So pretty. So who is getting a new Nexus device tonight/tomorrow? Let us know how it is, since Santa Android does not seem to making his way over to our side of the community. No, I am sure one of will get our hands on one of those sexy devices, and we will be sure to do a full on review.
Written by: David Pena

Tutorials How to flash ReVolt JB ROM for the Galaxy S2 I9100

2012-11-12T09:52:00.001-08:00

This guide shows you how to flash ReVolt JB ROM for the Galaxy S2 I9100.

Warning

The instructions in this guide are intended for use with the Samsung Galaxy S2, model number GT-I9100. Applying these instructions on another device or model may produce undesired outcomes.
The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.
Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
Read and understand the whole guide first before actually performing the instructions.

Requirements

Download ReVolt JB 2.6 ROM (ReVolt_JB_2.6_I9100.zip, md5sum: 4bb53fe79b5a269421335779f09d2b33)
- Mirror 1
- Mirror 2
Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.

Instructions

Copy the ReVolt JB 2.6 ZIP file into your phone’s internal SD card.
Turn off your Galaxy S2.
Boot your phone to ClockworkMod Recovery by pressing and holding down the Volume Up, Home, and Power buttons together until the recovery boots.
- NOTE: You can use the Volume keys to navigate and the Power button to select an item or option in Recovery Mode.
Create NANDroid backup of your current ROM by going to Backup and Restore and then select Backup.
Go back to main menu and perform a full wipe:
- Select Wipe data/factory reset and confirm the action on the next screen.
- Select Wipe cache partition and confirm the action on the next screen.
- Go back to the main menu and select Advanced. From there, select Wipe Dalvik cache and confirm the action on the next screen.
Return to the main menu and select Install ZIP from SD card.
Select Choose ZIP from SD card, then locate and select the ROM ZIP file. You then need to confirm the installation on the next screen.
Return to the main menu and select Reboot system now to restart your phone.

Great work! You have successfully installed the ReVolt JB 2.6 ROM based on Android 4.1.2 Jelly Bean on your Samsung Galaxy S2 GT-I9100.

How to flash C-RoM Mix for the Galaxy S I9000

2012-11-12T09:45:00.001-08:00

Warning

The instructions in this guide are intended for use with the Samsung Galaxy S, model number GT-I9000. Applying these instructions on another device or model may produce undesired outcomes.
The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.
Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
Read and understand the whole guide first before actually performing the instructions.

Requirements

Download C-RoM Mix v5.0 (C-RoM Mix v5.zip, 287 MB)
- Alternate Link
Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
- For backup tips, check our guides on how to sync your data to the cloud and how to create local backups of your mobile data.

Instructions

Copy C-RoM Mix ZIP file to your phone’s internal SD card.
Turn off your Galaxy S.
Reboot your phone to ClockworkMod Recovery by pressing and holding down the Volume Up, Home, and Power buttons at the same time until recovery boots.
- NOTE: You can use the Volume keys to navigate and the Power button to select an option while in Recovery Mode.
In Recovery Mode select Backup and Restore, then select Backup to create a NANDroid backup of your current ROM.
Wipe and reset your phone by doing the following:
- Select Wipe data/factory reset and confirm the action on the next screen.
- Select Wipe cache partition and confirm the action on the next screen.
Return to the main menu and select Install ZIP from SD card, then select Choose ZIP from SD card.
Locate and select C-RoM Mix v5.zip. Confirm the installation by selecting Yes – C-RoM Mix v5.zip on the next screen.
Return to the main menu and select Reboot system now to restart your phone.

Great job! You have successfully flashed C-RoM Mix 5.0 based on Android 4.1 Jelly Bean to your Samsung Galaxy S GT-I9000.

How to upgrade Samsung Galaxy Note GT-N7000 to Official Ice Cream Sandwich ICS 4.0.3 N7000XXLPY

2012-11-09T23:15:00.002-08:00

Follow below instructions to upgrade Samsung Galaxy Note GT-N7000 to official stock ROM Ice Cream Sandwich ICS 4.0.3 N7000XXLPY :

First make backup of contact, sms, apps, etc
Prepare USB cable, Fully charged N7000
Download Samsung Galaxy Note GT-N7000 N7000XXLPY Ice Cream Sandwich ICS 4.0.3 Open Germany firmware update and extract it
Download Odin3 v1.87 from here
If you have not install Samsung USB drivers or Samsung KIES yet, download here or mirror and then install it.
Turn off the phone
Put your Samsung Galaxy Note GT-N7000 into download mode by pressing and holding Volume down + HOME + Power button until Warning!! message appear on phone screen’s and the press Volume Up button to continue

How to put Samsung Galaxy Note GT-N7000 into download mode

Your Samsung Galaxy Note GT-N7000 should be in downloading mode now, (Android picture with Downloading… text appear on the phone)
Connect Galaxy Note to pc by USB cable, make sure driver is installed
Open Odin3 v1.87.exe
Make sure your N7000 detected by odin (ID:COM should be yellow on odin)

Samsung Galaxy Note GT-N7000 download mode detected by Odin downloader

Here is the files that should be selected on odin :

PDA : N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5

Press Start button then upgrading Samsung Galaxy Note GT-N7000 to Ice Cream Sandwich ICS 4.0.3 N7000XXLPY process will be started
Wait until finish and odin show PASS!
Congratulations, you have official stock ROM Ice Cream Sandwich ICS 4.0.3 on your Samsung Galaxy Note GT-N7000 now
Its recomended to wipe data/factory reset and wipe cache partition in recovery mode by pressing and holding Volume Up + HOME + Power button until recovery screen shown up while phone in off state
If you want to root and install ClockWorkMod recovery on it, follow instructions at How to Root and Install ClockWorkMod Recovery on Samsung Galaxy Note GT-N7000 running ICS 4.0.3 N7000XXLPY

Samsung Galaxy Note GT-N7000 running Ice Cream Sandwich ICS 4.0.3 N7000XXLPY

How to Root and Install ClockWorkMod Recovery on Samsung Galaxy Note GT-N7000 running ICS 4.0.3 N7000XXLPY

2012-11-09T23:10:00.001-08:00

Follow below instructions to root and install ClockWorkMod Recovery on Samsung Galaxy Note GT-N7000 running official stock ROM Ice Cream Sandwich ICS 4.0.3 N7000XXLPY :

First thing first if your Galaxy Note is not running latest ICS 4.0.3 N7000XXLPY, upgrade it first by following instructions at How to upgrade Samsung Galaxy Note GT-N7000 to Official Ice Cream Sandwich ICS 4.0.3 N7000XXLPY
Prepare USB cable, Fully charged N7000
Download CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.zip and extract it until you have CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.tar file
Download Odin3 v1.87 from here
If you have not install Samsung USB drivers or Samsung KIES yet, download here or mirror and then install it.
Turn off the phone
Put your Samsung Galaxy Note GT-N7000 into download mode by pressing and holding Volume down + HOME + Power button until Warning!! message appear on phone screen’s and the press Volume Up button to continue

How to put Samsung Galaxy Note GT-N7000 into download mode

Your Samsung Galaxy Note GT-N7000 should be in downloading mode now, (Android picture with Downloading… text appear on the phone)
Connect Galaxy Note to pc by USB cable, make sure driver is installed
Open Odin3 v1.87.exe
Make sure your N7000 detected by odin (ID:COM should be yellow on odin)

Samsung Galaxy Note GT-N7000 download mode detected by Odin downloader

Here is the files that should be selected on odin :

PDA : CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.tar

Press Start button then rooting and installing ClockWorkMod Recovery on Samsung Galaxy Note GT-N7000 running official stock ROM Ice Cream Sandwich ICS 4.0.3 N7000XXLPY process will be started
Wait until finish and odin show PASS!
Congratulations, you have rooted and installed CWM recovery on Samsung Galaxy Note GT-N7000 running official stock ROM Ice Cream Sandwich ICS 4.0.3 N7000XXLPY now
To enter CWM recovery mode, press and hold Volume Up + HOME + Power button until CWM recovery screen shown up while phone in off state

Source: http://www.androidaddicted.com

Update Firmware Samsung I747 Galaxy S III

2012-09-18T08:50:00.000-07:00

Features Samsung Galxy I747 GS III:

- GSM 850 / 900 / 1800 / 1900.
- HSDPA 850 / 1900 / 2100.
- LTE 700 MHz Class 17 / 2100.
- LCD: Super AMOLED capacitive touchscreen, 16M colors.
- Protection: Corning Gorilla Glass 2.
- TouchWiz UI.
- Internal Memory: 16 GB storage, 2 GB RAM.
- Wi-Fi 802.11 a/b/g/n, DLNA, Wi-Fi Direct, Wi-Fi hotspot.
- Bluetooth v4.0 with A2DP, EDR.
- NFC.
- Camera 8 MP, 3264x2448 pixels, autofocus, LED flash.
- Android OS, v4.0 (Ice Cream Sandwich).
- CPU: Dual-core 1.5 GHz.
- GPU: Adreno 225.
- Radio: TBD.
- A-GPS support and GLONASS.
- MicroSIM card support only.
- S-Voice Natural Language Commands and Dictation.
- Smart Stay eye tracking.
- Dropbox (50 GB storage).
- Active noise cancellation with dedicated mic.
- TV-out (via MHL A/V link).
- SNS integration.
- MP4/DivX/XviD/WMV/H.264/H.263 player.
- MP3/WAV/eAAC+/AC3/FLAC player.
- Organizer.
- Image/video editor.
- Document editor (Word, Excel, PowerPoint, PDF).
- Google Search, Maps, Gmail,YouTube, Calendar, Google Talk, Picasa integration.
- Voice memo/dial/commands.
- Predictive text input (Swype).

Tools For Update:

- Samsung I747 GS III Firmware Package.
- USB Drivers.
- Samsung I747 Odin Flasher.

Firmware Update Steps:

- Extract the Firmware Package to known location on your PC.

- Extract and Install the USB drivers and reboot your PC.

- Extract Odin flasher and run Odin.exe

- Make sure to check these Options on Odin flasher: Auto Reboot, F.Reset Time.

- Click on PDA button and Select the Firmware file from the Firmware folder:

I747UCxxxx_I747ATTxxxx_I747UCxxxx_HOME.tar.md5

- Put your phone into Download Mode: Press Volume Down Key + Power button, Then Volume Up key.

- Connect the Original USB cable to the Phone and the PC and install needed drivers.

- If all is OK then Odin should detect your Phone Com Port number.

- Click Start button toe let Odin upload the Firmware file to your phone.

- During the Update process do not try to stop or remove USB cable from phone or PC.

- When Odin completes the Job wait till your Phone rebooted completely.

- Do Full reset By this Code: *2767*3855#.

- After the Reset Done you can now Setup your Phone the way you like to use it.

Source: http://www.tsar3000.com

ROOT/UNLOCK TOOLKIT Samsung Galaxy Nexus Root Toolkit v1.3

2012-09-06T10:48:00.002-07:00

Samsung Galaxy Nexus Root Toolkit v1.3

VERSION 1.3 - This program contains all the files you need to unlock and root your device, or flash it back to stock and re-lock it. You can also use this program to backup all your user apps, system apps, and app data, and easily restore them later in one click; you can flash or boot any img files you wan't to any partition on your device; as well as flash any current or future stock android release, making updating your device as easy as can be; and now with the latest release (v1.3), you can configure the drivers automatically.

FEATURE BREAKDOWN:

System Variables:

Ask the end user if they want to update their systems path variable to point to adb for global use from the cmd line
This feature is optional.

Drivers:
This will automatically:

Install the “Verizon_Wireless_I515_Galaxy_Nexus_USB_Driver_v1. 4.6.0.exe”
Provide the end user detailed instructions for manually configuring their drivers.
Driver configuration is a two step manual process:
Your device has to be configured once when its ON and again when its in BOOTLOADER
You have to manually configure these drivers through device manager.
Follow the onscreen instructions for driver configuration, or refer to post #2 for more details.

Unlock:
This will automatically:

This will unlock your device which will also inexorably factory reset your device.
Factory resting means that, ALL your user app settings and files will be erased.
So… please take the steps necessary to preserver your important data.
I recommend backing up all your picture, music files, and such manually by just:
Plugging your device into your computer and using drag and drop to copy them over
Then use the backup feature of the toolkit to make a full backup of your apps and settings
See “backup and restore”

Root:
This will automatically:

Push su.zip (Superuser.apk) to your sdcard
Flash clockwork mod (this is specific to your device model; ie CDMA version vs. GSM version)
Provide on screen instructions for completing the rooting procedure
Launch a script which automatically enters adb shell commands to rename the file “recover-from-boot.p” to to “recover-from-boot.p.bak to ensure permanent clockwork

*If your computer says it can’t find su.zip then you probably forgot to do the initial install… do it.
*If you did do the initial install, then the problem is still related to that.
*Your su.zip along with clockwork img, all should be in the directory

Code: \android-sdk-windows\platform-tools

Flash Stock + Unroot:
This will automatically:

Download the latest 4.02 android release for your specific model (CDMA/LTE vs GSM/HSPA+)
Hashcheck the resulting download once it’s finished to verify the files integrity. If it passes:
Extract the .tgz factory image package in the proper manner to a specific sub directory in your GnexToolkit folder
Flash the stock images to your device in a highly controlled and ordered fashion.
Allow you to bypass the download and extract phase in the future if you have already done it before
Allow you to point the program to ANY android factory image package, and let the program take care of the rest
This process also includes a user input box governed hashcheck verification step to ensure the files integrity.
Has an option to start the flashstock process from bootloader mode incase the user is bricked and can’t boot ups charged first!
Flashing stock will also inexorably unroot your device.

OEM lock:
This will automatically:

Re-lock your device back to original equipment manufacture specifications.
You must use the “flash stock + unroot” feature first before being able to use this option successfully.

Backup Apps + Data:
This will automatically:

Initiate a backup of all your apps and app data
User will be prompted to enter a password on there device to protect their backup file
Once the backup is complete it will be stored on the users computer in the directory:
And the file name will automatically be generated as the date and time the backup was made
Note: this does not backup all of your SDcards contents: So its up to the end-user to backup any picture or music files they have.
This only backs up apps + app data
The user is given the option to backup system apps as well

Restore Apps + Data:
This will automatically:

Initiates a customized browse to file window which asks you to locate the android backup files (*.ab) you would like to restore
This browse to file window automatically defaults to the proper location of your backups

Code: \android-sdk-windows\nexusbackup

Once the user selects the backup file, the program will automatically initiate a restore operation
User will be prompted to enter the password they set in order to restore their file
When the correct password is entered the file will be restore.

Quick tools:

Provides the end user an easy one click method for rebooting their device
Rebooting their device into bootloader mode, and checking if their device is recognized.

Flash to partition:

Provides the end user an easy one click method for flashing any img file to any partition on their device
Is designed to make modding on the nexus as simple as selecting the file you wan’t to flash and pressing ok
Has the option to boot img files as well, to try them out temporarily before flashing them permanently

Instructions:

Do not plug in your device until this program prompts you too!
Install the program by double clicking the GnexRootToolkit.sfx.exe
This will extract the contents to C:\GnexRootToolkit
Place a shortcut on your Desktop
Launch the program for first use
Use the “Drivers” option to make sure all your drivers get configured properly.
This is a crucial step. Nothing else will work otherwise, so make sure your drivers are properly configured before you try doing anything else with this program.
Follow the onscreen driver instructions carefully and you should have no problems.
Use the “Backup Apps + Data” if you want to preserve your apps and settings for restoration after you unlock and root.
Then use the “Unlock” to unlock and the “Root” to root… Tada! Enjoy your unlocked and rooted device. ^_^
Then whenever you need to go back to square one just use the “Flash stock + Unroot” and “OEM lock” features.
Remember that this option can also be used if you completely brick.
This should bring you back to a fully locked stock factory state.

Downloads:

There is now one universal version that works for both Verizon (CDMA) and GSM models.

DOWNLOAD LINK
MIRROR LINK
Galaxy Nexus Forum Link (More Info Here)

Cedits:

WugFresh!!!!
Droid Life for their great instructions!
Google for being pwn and making android.
Koush for making Clockwork Mod
mskip for getting Devcon.exe to work properly on XP
copkay for his great guide on making backups

DONATE to WugFresh

One-Click Unbrick Tool For Samsung Android Devices

2012-09-06T10:30:00.002-07:00

One-Click Unbrick Tool For Samsung Android Devices

This tool was created and develop by AdamOutler over XDA, above all it's free and very easy to use. Now, this tool can fix bricked problems on Samsung android devices, such as, getting problem on booting the phone into download mode and or recovery mode, the idea of this tool will force the device into download mode (like a download mode jig) which you can get access to restore or flash back your Samsung phone's Android firmware.

Note: Stuck in a boot loop? Is it still able to boot into CWM(Recovery Mode) or Download Mode.
If it's still able to go back into Download Mode, you don't need this software.
Just turn your Captivate into the Download Mode and flash back to STOCK Eclair or Froyo using Odin 1 Click or whatever similar.

About One-Click UnBrick

This Software:
Will work on all Samsung devices which use Odin
Is a single, portable executable
Is the first one-click anything for our devices on Linux
Works on Mac
Works on Windows
Is open source
Is programmed in Java
Deploys and installs Heimdall for your OS
Is super easy to use.... Only one button!

Demonstration video:

One-Click Unbrick Tool Screenshot:

This software is completely safe. It is a part of my Heimdall One-Click project. I wanted to release this to work out any cross-platform difficulties which may be encountered before I release Heimdall One-Click.

You can download this tool and get a full instruction and support from Adan's XDA-developer thread here: http://forum.xda-developers.com/show....php?t=1153310

Samsung Navi firmware Downloader

2012-09-06T10:09:00.004-07:00

Samsung navi firmware

* Automatically checks for new firmware update! (Pro only)
* Notifies the user with signal and vibration if a new firmware is released. (Pro only)
* Finds your Product Code and HIDSWVER
* Use custom or presets of Product Codeand HIDSWVER
* Send the output by email
* No ads (Pro Only)
* Check multiple regions automatically (Pro Only).
* Check multiple regions on one click (Pro Only).

Click to Download CFD v2.1

Supported models:

Work on any Samsung Device running Android/BADA
it contained .md5 files only..
you can download your .ops & .pit files here click this

Presets Click on model to toggle presets and click a country of your choice ;
Android Model:

GT-B5510 Model: GT-B5510B Model: GT-B5510L Model: GT-B7510 Model: GT-B7510L Model: GT-I5500 Model: GT-I5500B Model: GT-I5500L Model: GT-I5500M Model: GT-I5503 Model: GT-I5503T Model: GT-I5510 Model: GT-I5510L Model: GT-I5510M Model: GT-I5510T Model: GT-I5700 Model: GT-I5800 Model: GT-I5800L Model: GT-I5801 Model: GT-I8150 Model: GT-I8150B Model: GT-I9000 Model: GT-I9000B Model: GT-I9000M Model: GT-I9000T Model: GT-I9001 Model: GT-I9003 Model: GT-I9003L Model: GT-I9008L Model: GT-I9088 Model: GT-I9100 Model: GT-I9100G Model: GT-I9100M Model: GT-I9100P Model: GT-I9100T Model: GT-I9103 Model: GT-I9108 Model: GT-I9220 Model: GT-N7000 Model: GT-P1000 Model: GT-P1000L Model: GT-P1000M Model: GT-P1000N Model: GT-P1000T Model: GT-P1010 Model: GT-P6200 Model: GT-P6201 Model: GT-P6211 Model: GT-P6800 Model: GT-P6810 Model: GT-P7300 Model: GT-P7310 Model: GT-P7500 Model: GT-P7500D Model: GT-P7500M Model: GT-P7500R Model: GT-P7501 Model: GT-P7510 Model: GT-P7511 Model: GT-S5360 Model: GT-S5360B Model: GT-S5360L Model: GT-S5360T Model: GT-S5363 Model: GT-S5369 Model: GT-S5570 Model: GT-S5570B Model: GT-S5570I Model: GT-S5570L Model: GT-S5578 Model: GT-S5660 Model: GT-S5660L Model: GT-S5660V Model: GT-S5670 Model: GT-S5670L Model: GT-S5690 Model: GT-S5830 Model: GT-S5830B Model: GT-S5830i Model: GT-S5830L Model: GT-S5830T Model: GT-S5838 Model: GT-S6102 Model: GT-S7230E Model: GT-S7500 Model: SC-01C Model: SC-01D Model: SC-02B Model: SC-02C Model: SC-02D Model: SC-03D Model: SCH-i559 Model: SCH-i569 Model: SCH-i589 Model: SCH-i809 Model: SCH-i909 Model: SCH-M720 Model: SCH-W899 Model: SGH-I727 Model: SGH-I727R Model: SGH-I777 Model: SGH-I857 Model: SGH-I896 Model: SGH-I897 Model: SGH-I927 Model: SGH-I927R Model: SGH-I957 Model: SGH-I957D Model: SGH-I957M Model: SGH-I997 Model: SGH-I997R Model: SGH-T499 Model: SGH-T589 Model: SGH-T589R Model: SGH-T679 Model: SGH-T679M Model: SGH-T839 Model: SGH-T859 Model: SGH-T869 Model: SGH-T959 Model: SGH-T959P Model: SGH-T959V Model: SGH-T989 Model: SGH-T989D Model: SPH-D710 Model: YP-G70 Bada OS Model: GT-S5250 Model: GT-S5253 Model: GT-S5260 Model: GT-S5330 Model: GT-S5333 Model: GT-S5380 Model: GT-S5380D Model: GT-S5750E Model: GT-S5753E Model: GT-S7230E Model: GT-S7250 Model: GT-S8500 Model: GT-S8500B Model: GT-S8500L Model: GT-S8530 Model: GT-S8600 Model: SHW-M210S Model: SPH-M7350

Samsung Galaxy W GT-I8150T Firmware List

2012-09-06T09:42:00.000-07:00

Galaxy W GT-I8150T Firmware List

Welcome to the Samsung Galaxy W GT-I8150T firmware page list. Here you will find the latest firmware version.

Some things to keep in mind :

Check your firmware by typing *#1234#
Check your simlock before you flash!
Re-partition : ________.OPS

Zip archive password:
Code:
mod2xtreme.com
IF you wish to get more firmware of GT-I8150T, kindly provide the following info:-
Product Code & HIDSWVER (pda/csc/phone/kernel)

Download	PDA	Version	Release Date	CSC version	Country / Carrier
Link	I8150TDULA4	2.3.6	January 2012	I8150TVAULA1	Australia (Vodafone)
Link	I8150TDULM1	2.3.6	July 2012	I8150TVAULG1	Australia (Vodafone)

Oceania - I8150T Firmwares

Download PDA Version Release Date CSC version Country / Carrier
Link
I8150TDULA4 2.3.6 January 2012 I8150TVAULA1 Australia (Vodafone)
Link
I8150TDULM1 2.3.6 July 2012 I8150TVAULG1 Australia (Vodafone)

May I have Product Code / HIDSWVER (pda/csc/phone/kernel)

In Dialer Keypad type *2767*4387264636#

e.g. For Note

Code:
GT-N7000RWAXEU

With these info.

Code:
GT-I8150XXXXXX
I8150TDULA4/I8150TVAULA1/I8150TDULA2/I8150TDULA4
We can trying searching for it at Samsung server.

How To Update Firmwares of Samsung: C3330 Champ 2 and C3332 Champ 2 DUOS

2012-09-04T00:15:00.000-07:00

How To Update Firmwares of Samsung:
C3330 Champ 2 and C3332 Champ 2 DUOS

These two models from Samsung come to cover many needs in GSM Market from making usual calls to using two sim cards in one mobile phone instead of using two sets for each sim card.

The both models have TFT Resistive Touchscreen with 256K colors, TouchWiz Lite UI v2.0, Card slot for microSD up to 16 GB, Bluetooth, 2 MP Camera (1600 x 1200 pixels), Stereo FM radio with record option, And only C3332 model support Dual Sim cards option when C3330 support one Sim card.

The Update steps is same for both models and the only difference is the Firmware package you must use in the update process.

Before you start updating your phone download these tools:

- Samsung C3330 or C3332 Firmware Package ( download and extract ).
- Original Flashtool program.
- Original USB cable.

It will be easier if you install USB drivers before you start th Update and you can do that like this:

Take out the battery from your phone and put it back then keep pressing Volume Down and Up keys and insert the USB cable into it and wait till windows ask you for the drivers of the connected device, At this step you can show windows the USB drivers folder that are located inside the Flashtool folder, Then reboot your PC.

Firmware Update Steps:

- Run Flashtool program and make sure that ( Custom Order ) is checked and also ( Erase whole flash before download ) is selected too.

- Now you should select the Firmware files so you can Drag & Drop them on the Flashtool in this order:

C3330xxxxx_psi.fls
C3330xxxxx_slb.fls
C3330xxxxx_BIN.fls
C3330xxxxx_CDS.fls
C3330Oxxxxx_CSC.dffs

And if the phone is Samsung C3332 :

C3332xxxxx_psi.fls
C3332xxxxx_slb.fls
C3332xxxxx_BIN.fls
C3332xxxxx_CDS.fls
C3332Oxxxxx_CSC.dffs

- Make sure of the following options:

USB Port = 1
Baud Rate = 921600
# Channels = 1
Communication Driver = Infineon USB Driver

- Click NEXT> button ( at the lower right corner ).

- Click Start USB1 button at the new window.

- Press and keep Volume Up and Volume Down Keys on the phone and connect USB cable to it.

- If all is OK the the Update will start automatically.

- You will see that the program will upload the selected firmware files one by one.

- When the process is done correctly you will see Success word on the program window with Green line under it.

- Disconnect phone and turn it on then make full reset: *2767*3855#.

How To Update Samsung I8530 Galaxy Beam Firmware

2012-09-03T20:39:00.000-07:00

How To Update Samsung I8530 Galaxy Beam Firmware

As Samsung keep releasing new updates for Android OS everyday so it is very important to you as Android phone user to learn the right steps to update any Android device, In this Guide we will talk about the update process of Samsung I8530 Galaxy Beam and give you all the needed tools and steps.

All you have to do is to read this guide first and then download the tools and firmware and after that follow the steps one by one.

Samsung I8530 Main Features:

- GSM 850 / 900 / 1800 / 1900.
- HSDPA 850 / 900 / 1900 / 2100.
- Built-in nHD projector.
- Touch-Sensitive Controls.
- LCD: TFT capacitive touchscreen, 16M colors.
- TouchWiz UI v4.0.
- MMC: MicroSD, up to 32 GB.
- Internal Memory : 8 GB storage, 768 MB RAM.
- Wi-Fi 802.11 b / g / n, DLNA, Wi-Fi Hotspot.
- Bluetooth : v3.0 with A2DP, HS.
- Camera : 5 MP, 2592 x 1944 pixels, Autofocus, LED flash.
- Android OS.
- CPU : Dual-core 1 GHz Cortex-A9.
- A-GPS Support.

What to Download for the Update Process?

The first thing you need is the Firmware Package which will be used to update your phone with, So check at Samsung I8530 Firmware page and download the wanted one ( Download and extract it to known place on your PC ).

You may need to download and install USB drivers on your PC if it is the first time you connect new Samsung phone to it.

Odin Flasher is the Original program you will use to Update your phone so download it.

Firmware Update Steps:

- Run Odin program and check: Re.Partition, Auto Reboot, F.Reset Time.

- Click PIT button and select: GT-I8530_EUR_XX_xG.pit

- Click PDA button and select: CODE_GT-I8530_I8530xxxxx_xx_REV00_user_SEC_KEY_xxx_xG.tar.md5

- Click CSC button and select: CSC_GT-I8530-CSC-xxxxxx_SEC_KEY_xG.tar.md5

- Put the phone into Download Mode: Volume Down + OK button + Power button.

- Use the Original USB cable to connect your Phone to PC and install drivers if needed.

- When all is OK the Odin will Detect the Com port number of your phone.

- Click Start button and wait the update process to be done.

- PASS! word in green will appear at Odin's window if the update done correctly.

- The phone will rebooted automatically so wait till it fully on and then do full reset by code: *2767*3855#

How To Update Samsung P3110 Galaxy Tab 2 7.0 Firmware

2012-09-03T17:04:00.000-07:00

How To Update Samsung P3110 Galaxy Tab 2 7.0 Firmware

In another Guide we talk about how you can use the Original Odin Flasher to upgrade the Android version of Samsung P3100 Galaxy Tab 2 7.0, And in this one we will try to show you the steps you should take when you want to update Samsung P3110 Galaxy Tab 2 7.0 as this one has no GSM section what means there is no Modem part to flash or update.

Some of the Main Features of Samsung P3110:

- PLS LCD Capacitive Touchscreen, 16M colors.
- TouchWiz UX UI

- MMC: microSD, up to 64 GB.
- Internal Memory: 8 / 16 / 32 GB storage, 1GB RAM.
- Wi-Fi 802.11 a / b / g / n, DLNA, Wi-Fi Direct, Dual-Band.
- Bluetooth: v3.0 with A2DP.
- Camera: 3.15 MP, 2048 x 1536 pixels.
- Geo-Tagging, Smile Detection.
- Android OS, v4.0.3 (Ice Cream Sandwich).
- CPU: Dual-core 1 GHz.
- GPU: PowerVR SGX540
- GPS

Now before you start the Upgrade process you have to get these tools:
- Samsung P3110 Galaxy Tab 2 (7.0) wanted Firmware Package.
- Odin Flasher ( P3110 ).
- USB Drivers.
- Original USB Cable.

After you get the above tools you can extract and install USB drivers, And for sure you need to extract the Firmware package to select the files from it.

Firmware Upgrade Steps:

- Run Odin flasher and check all these options at the left side of Odin's window:
Re-Partition, Auto Reboot, F.Reset Time

- Select PIT file: for 16GB tablet model select ( signed_espresso_20120220_16G.pit ) and for 8GB tablet Model you have to select ( signed_espresso_20120220_8G.pit ).

- As this Tablet does not have GSM part then no need for Modem file but you need these:

BOOTLOADER: BOOTLOADER_P3110xxxxxx_379370_REV04_user_low_ship.tar.md5

PDA: PLATFORM_P3110xxxxxx_379370_REV04_user_low_ship.tar.md5

CSC: CSC_Oxx_P3110Oxxxxxx_396275_REV04_user_low_ship.tar.md5

- Before you Connect USB cable between your Tablet and the PC you must put the Tablet into Download Mode:

Press Volume Down Key + Power Key at the same time for about 10 seconds.
After that press Volume Up key to get into Download Mode.

- Now you can connect USB cable to your Tablet and PC too and install needed USB drivers.

- At this step you need to make sure that the Odin Flasher can detects your Tablet correctly so in case all is OK you must see the com number that your Tablet takes at Odin's window in yellow.

- When all the previous steps are done you can Click START button to begin the Upgrade process.

- Wait till you see PASS! word in Green at Odin's window, And the Tablet restarts by itself.

- Make Full Reset to your Tablet using this Code: *2767*3855#.

Notice: Sometimes when you download Samsung P3110 Firmware Package you may find one file only inside it so in this case you do not need to check ( Re-Partition ) at all and also the one file you have must be selected as PDA part.

How To Update Samsung S5220 Star 3 Firmware By Flashtool and USB Cable

2012-09-03T13:29:00.000-07:00

How To Update Samsung S5220 Star 3 Firmware By Flashtool and USB Cable

Samsung S5220 Star 3 also known with another name ( Samsung Tocco Lite 2 ) so the both names are for the same model.

This Guide is going to explain the Update process completely from the needed tools till the final steps, So Collect the tools and read the steps then start to do them one by one carefully to get you Samsung Star 3 Firmware updated.

Main Features of Samsung S5220:

- GSM 850 / 900 / 1800 / 1900.
- LCD: TFT capacitive touchscreen, 256K colors.
- TouchWiz Lite UI v2.0.
- MMC: microSD, up to 32 GB.
- Wi-Fi 802.11 b/g/n.
- Bluetooth: v3.0 with A2DP.
- Camera: 3.15 MP, 2048x1536 pixels.
- Stereo FM radio with RDS.
- SNS integration.
- MP3 / WAV / WMA / AAC+ player.
- H.263 / H.264 / MP4 player.
- Organizer.
- Document viewer.
- Voice memo.
- Predictive text input.

Update Tools:

- Original S5220 Firmware Package.
- Original Flashtool Program.
- Original USB Cable.

Firmware Update Steps:

- First you need to let your PC install the needed USB drivers, And to do that remove battery from the phone and insert it back, Now press Volume + and - keys and keep them like that and insert USB cable into the phone, When windows ask you to install the drivers you can let it search inside the Flashtool folder. After that reboot your PC.

- Run Flashtool program and make sure that ( Custom Order ) is checked and also ( Erase whole flash before download ) is selected too.

- Press Ctrl + O each time you want to select one of the Firmware Files and select them in this Order:

S5220xxxxx_psi.fls
S5220xxxxx_slb.fls
S5220xxxxx_BSY.fls
S5220xxxxx_CDS.fls
S5220Oxxxxx_CSC.dffs

- Make sure of the following options:

USB Port = 1
Baud Rate = 921600
# Channels = 1
Communication Driver = Infineon USB Driver

- Click NEXT> button ( at the lower right corner ).

- Click Start USB1 button at the new window.

- Press Volume + and - Keys on the phone and connect USB cable to it.

- If all is OK the the Update will start automatically.

- You will see that the program will upload the selected firmware files one by one.

- When the process is done correctly you will see Success word on the program window with Green line under it.

- Disconnect phone and turn it on then make full reset: *2767*3855#.

Link	I9210XXLB1	2.3.6	2012 February	I9210COVKL4	Sweden
Link	I9210XXLC2	2.3.6	2012 March	I9210COVLC1	Sweden
Link	I9210XXLC2	2.3.6	2012 March	I9210TMNLB3	Portugal (TMN)
Link	I9210XXLPJ	4.0.4	2012 November	I9210COVLP5	Sweden
Link	I9210XXLPH	4.0.4	2012 September	I9210TLALP2	Sweden