Special Projects Blog

KISS Packaging Systems positive displacement pump filler

Special Projects International — Tue, 15 Oct 2013 20:55:17 +0000

KISS Packaging Systems Inc. model SPDF-12-ROP positive displacement pump filler. The filler has 12 heads and pumps, has a viscosity range up to 18,000 cps, and is capable of up to an estimated 120 cpm depending on container size and product. The filler heads have brass nozzles and are movable to accommodate different size containers. The filler has been modified to include 12 filters, one for each head. The filler primarily consists of stainless steel contact parts. Requires 220/240 vac 3 phase electrical supply and 120 psi @ 6-12 cfm air supply.

http://www.specialprojects.com/equipment/5073/

Hartzell stainless steel centrifugal fan

Special Projects International — Wed, 05 Jun 2013 20:45:34 +0000

Hartzell Fan Inc stainless steel centrifugal fan. Model 032-22-BC00. Blower has up to an estimated 8309 cfm with 5 hp motor. Blower has a 23.25″ diameter inlet and a 17.5″ x 24.25″ outlet. The blower fan blade is 22″ diameter x 6.5″ wide. The ring around the squirrel cage is carbon steel. Requires a 5 hp 1800 rpm motor. Appears unused.

http://www.specialprojects.com/equipment/6017/

Tri-Mer Corp wet dust collector

Special Projects International — Thu, 11 Apr 2013 15:55:54 +0000

Tri-Mer Corporation model W/W-100 high efficiency wet dust collector. This Whirl/Wet dust collector is constructed of stainless steel. It is designed to remove particles that are 3 microns or larger. The dust collector is designed to handle an air stream of 8,400 to 10,500 cfm. The dust collector has 20″ diameter air inlets and outlets. The base has 4 sight glasses to monitor the water level. There is a 3″ flanged water drain in the bottom of the collector. There are also a 1.5″ and a 1.25″ npt fitting for water fill. The over-all dimensions of the dust collector are 100″ wide x 67″deep x 149″ tall (the unit can be disassembled into the 65″ tall top section and 85″ tall bottom section for shipping). This unit includes a 500 gallon stainless steel recirculation tank. The tank has on the top a 24″ manway, 2″ vent pipe, 1.5″ npt and 3″ flanged fitting. The bottom has a 2″ npt drain with 13″ of ground clearance. The water level is regulated by four pressure switches and a 15 psi pressure gauge. The over-all dimensions of the recirculation tank are 60″in diameter x 72″ tall. Blower and pump (not included) will need to be added specifically for your application. Last use was for spices. Serial number 40488.

http://www.specialprojects.com/equipment/5910/

Mueller 15-gallon insulated and jacketed reactor

Special Projects International — Wed, 10 Apr 2013 18:52:02 +0000

Mueller Co 15 gallon insulated and jacketed reactor. Reactor interior has 4 baffles and is all constructed of stainless steel. The internal pressure rating for the vessel is 25 psi & full vacuum @ 340° F. The jacket is rated for 100 psi @ 340° F. National Board # 4438. The reactor has caster. This unit has a .5 hp 1725 rpm Lightnin agitator that is tagged for hazardous locations with (2) 4 blade propellers. The top has (4) .5″ diameter NPT inlets and (2) 1.5″ NPT outlets. The side has a 2″ NPT for insulation, a (2) .75″ NPT jacket in/outlets. The bottom has a .75″ NPT, a .5″ NPT, and a 1″ NPT center discharge reduced to .5″ NPT that is 6″ from the ground. Overall dimensions are 42″ wide x 42″ long x 80″ tall. Serial number 140409-1. Requires 115/230 vac 1 phase electrical supply.

http://www.specialprojects.com/equipment/6000/

AMI TopZip resealable packaging system

Special Projects International — Wed, 03 Apr 2013 14:40:53 +0000

AMI TopZip model D-2500-25-RH is a resealable packaging system that affixes a zipper along the top, short side of polyethylene packages (ex. Ziploc). TopZip can run up to an estimated 60 bags per minute. The TopZip system can be used with any vertical bagger and can be used inline with form, fill, and seal equipment. The reclosable zipper application is currently set up for 1629 type zipper. The unit includes a Branson BCA 900 ultrasonic power supply. Serial # 00021801. Requires 220 vac, 3 phase, 20 amp electrical and 80 psi pneumatic supplies. Built 2000. This unit was inspected at our warehouse by an AMI technician and is in working condition. Good condition.

http://www.specialprojects.com/equipment/5443/

Breddo Likwifier 600 gallon blender

Special Projects International — Fri, 15 Mar 2013 15:06:03 +0000

Breddo Likwifier 600 gallon 316 stainless steel jacketed scrape surface conical bottom blender. Model LORWWSS and size 600 gallon. National Board # 32546. Interior dimensions are 64″ diameter x 40″ straight side height x 15″ cone. Overall dimensions are 72″ wide x 123″ long x 116″ high with legs and agitator. The bottom has a 3″ Tri-Clamp discharge that is 25″ from the ground and a 14″ diameter high shear blending impeller driven by a 125 hp 1770 rpm motor. The top has (2) 1/3 hinged lids, (4) 2″ Tri-Clamp inlets, (2) 1.5″ Tri-Clamp inlets and (1) 2″ inlet. The side and bottom jackets have a Maximum Working Pressure (MAWP) of 125 psi @ 400° F, a Minimum Design Metal Temperature (MDMT) of 0° F @ 125 psi, and (4) 2″ NPT inlets/outlets. Tank is equipped with a side and bottom scrape agitator. Agitator is driven by a 7.5 hp 1720 rpm with a 96.8:1 ratio gear reduced euro drive motor. Serial number 267622 01117. Requires 230/460 vac 3 phase electrical supply. Built in 2001 and refurbished in 2008. Cost an estimated $97,500 new. Good Condition.

http://www.specialprojects.com/equipment/6201/

Palamatic Rota Slit bag opener

Special Projects International — Thu, 14 Mar 2013 13:19:49 +0000

Palamatic Rota Slit bag opener. Stainless steel construction on contact surfaces. Capable of handling 2-8 50 lbs sacks per minute. The sacks are loaded onto a 30″ wide x 18′ long conveyor and feed to rotating cutting wheels to open the bag. The product is separated from bag by screw and screen system. This also allows for delumping of product. Product is discharge to through chute to 4″ rotary airlock then to 1.5″ discharge line. The bag remnants are sent to a bag compactor for collection. Overall dimensions of unit are 9′ wide x 20′ long x 13′ high with conveyor. Requires 230/460 vac 60 hz 3 phase electrical supply. Excellent condition.

http://www.specialprojects.com/equipment/6506/

Fitzpatrick Co. Fitzmill GuiloRiver mill

Special Projects International — Wed, 13 Mar 2013 12:27:56 +0000

The Fitzpatrick Company Fitzmill stainless steel GuiloRiver mill. Model 59. The GuiloRiver mill is used for pre-breaking or sizing frozen food products. The mill has 15″ diameter x 20″ wide rotor, a 11.75″ x 20.25″ infeed hopper that is 74″ from the ground, and a 17.5″ x 21″ discharge that is 36.5″ from the ground. Rotor is driven by 50 hp 1770 rpm motor. Overall dimensions are 45″ wide x 95″ long x 92″ tall. Serial number GR-20-538. Requires 208-220/440 vac 3 phase electrical supply.

http://www.specialprojects.com/equipment/6614/

Fryma model VME-2400 vacuum mixer

Special Projects International — Tue, 12 Mar 2013 14:47:21 +0000

2400 Liter working capacity Fryma model VME-2400 vacuum mixer. The tank has an overall height of 101″ to the top of lid including legs and 87″ to the top with the lid removed. The overall diameter of tank with jacket is 63″. The interior dimensions are: 61″ diameter, 54″ straight side height, 11″ dome top, and 11″ dish bottom. The working temperatures are 150° C for the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. There are two agitator drives, a 7.5 hp motor that drives a center 3 prop agitator and a scrape agitator through a chain drive and a 50 hp motor that drives a disperser type agitator off to the side of the center shaft. The top has an 8″ flanged opening that is clamped shut and 6″ glass inspection port with light. The top also has a 2″ sanitary, 1.5″ sanitary, and (2) 1″ threaded fittings. The bottom has a 6″ sanitary discharge with a pneumatically operated valve. Fabrication # M10510. Requires 230/ 460 vac 3 phase electrical supply. Previously used for toothpaste. Good Condition.

http://www.specialprojects.com/equipment/5613/

Detroit Tool & Eng Co 100 cuft stainless steel double ribbon blender

Special Projects International — Thu, 07 Mar 2013 14:08:27 +0000

Detroit Tool & Eng Co 100 cuft stainless steel double ribbon blender. Mixing chamber measures 90″ long x 45″ wide x 55″ deep for a total volume of 100 cu ft. The outer 45″ diameter ribbon and the inner 33″ diameter ribbon are on a 6″ shaft. Blender has a 13″ x 13″ inlet on top, a 2″ sanitary Tri-Clamp inlet on the front side, and has a 7″ x 21″ end discharge. Discharge has a manual open/close gate valve. Blender has a half lid. Driven by a 40 hp 1775 rpm motor through a 24.3:1 gear reducer. The overall dimensions are 138″ long x 60″ wide x 78″ tall. Require 230/460 vac 3 phase electrical supply.

http://www.specialprojects.com/equipment/5271/