Pusat Service, Parts dan Konsultasi Printer HP,Epson, Canon

Head Officejet 7000

2012-02-02T11:33:00.001+07:00

Ready Head Officejet 7000

Harga Call aja ya

Head Canon IX4000, IX5000 (Original)

2011-09-24T10:52:00.004+07:00

Head Canon Untuk : PIXUS 560i, 850i, MP700, MP710, MP730, MP740, i560, i850
MultiPASS MP700, MP730
ImageCLASS MP700, MP730
iP3100, iP3000
iX4000, iX5000

Harga Rp 725.000 (Original)

Formatter Laserjet Mono

2011-09-24T05:55:00.004+07:00

Price List Formatter Laserjet Mono :

Formatter Laserjet 1010 Rp 225.000 (Exchange Refurb)

Formatter Laserjet 1020 Rp 275.000 (Exchange Refurb)

Formatter Laserjet M2727NF Rp 1.000.000 (Exchange Refurb)

Formatter Laserjet M1522NF Rp 900.000 (Exchange Refurb)

Formatter Laserjet M1005MFP Rp 700.000 (Exchange Refurb)

Formatter Laserjet 5200L Rp 1.100.000 (Exchange Refurb)

Formatter Laserjet 5200 Rp 1.300.000 (Exchange Refurb)

Formatter Laserjet 5200N Rp 1.500.000 (Exchange Refurb)

Formatter Laserjet 2055D Rp 700.000 (Exchange Refurb)

Formatter Laserjet 2055DN Rp 900.000 (Exchange Refurb)

Formatter Laserjet 4015N Rp 2.000.000 (Exchange Refurb)

Formatter Laserjet 4515N Rp 2.300.000 (Exchange Refurb)

SALE!!!! SCANJET 5590

2011-06-30T15:43:00.003+07:00

SALE Scanjet 5590 Harga cuma Rp 1.000.000
Cuma ada 4 unit... Spec Bagus... Garansi 1 bulan.

Fusing Assy Laserjet

2010-07-28T18:49:00.007+07:00

SALE !!!!!!! SALE !!!!!!!

Fusing Laserjet 1160/1320 NEW !!! REPLACE !!! Rp 800.000,-

Fusing Laserjet Color CP 1215 NEW !!! REPLACE !!! Rp 900.000,-
(Also use For CM1312/CP1210/CP1515N/CP1518)

Fusing Laserjet Color 1600/2600 NEW !!! REPLACE !!! Rp 900.000,- (SOLD OUT)

Formatter P2015D, P2015DN, P3005D, P3005DN

2010-05-09T19:30:00.005+07:00

Ready Stock!!!!!!!!

Formatter Laserjet P2015D (Refurb)
Harga : Rp 700.000(Exchange), Rp 850.000 (Replace)

Formatter Laserjet P2015DN (Refurb)
Harga : Rp 900.000(Exch), Rp 1.100.000(Replace)

Formatter Laserjet P3005D (Refurb)
Harga : Rp 800.000(Exch), Rp 1.000.000(Replace)

Formatter Laserjet P3005DN (Refurb)
Harga : Rp 900.000(Exch), Rp 1.100.000(Replace)

PLATEN EPSON

2010-03-13T11:24:00.002+07:00

Platen Epson Compatible
Use For Epson LQ-2180, LQ-2170, FX2180, FX 2170
Harga :
1 pcs Rp 175.000
10 pcs Rp 150.000
20pcs Rp 125.000

Hubungi kami segera......

Komponen/Elektronik Parts

2009-11-16T21:33:00.002+07:00

Ready stock Mosfet untuk power supply Epson Dotmatrik
2SK1692 (untuk power supply LQ 1170/ LQ 2170/2180)
2SK1725 (untuk power supply LQ 2170/2180)

Kami juga melayani Permintaan pembelian komponen atau elektronik part (IC, Transistor, Mosfet) dalam jumlah minimal 100 pcs.

Laserjet /Deskjet Second/Bekas

2009-11-16T21:23:00.004+07:00

Laserjet Second/Bekas
Laserjet 1300 include: Toner, Cable power&usb 4 unit
Laserjet 1320 include: Toner, Cable power&usb 3 unit
Laserjet P2015N include: Toner, Cable power&usb 1 unit
Laserjet 4200N include: Toner, Cable power&usb 1 unit
Laserjet 4100 include: Toner, Cable power&usb 1 unit

Deskjet Second/Bekas
Deskjet 3820 (A4)
Deskjet 9800 (A3)

Jetdirect External EW2400

2009-02-21T13:42:00.003+07:00

HP Jetdirect ew2400
802.11g Wireless and Fast Ethernet External Print Server
Jetdirect external untuk printer HP Business Inkjet, HP Color LaserJet, HP Designjet,HP LaserJet, HP Officejet, HP Deskjet, dll
Koneksi bisa melalui 10/100Base-TX (UTP) atau melalui Wireless
Kondisi barang Refurbise
Include: Power supply, USB cable, LAN/Ethernet cable, set up documentation
Price : Rp 800.000

Laserjet Second

2009-02-03T08:50:00.006+07:00

Ready stock
Laserjet 8100N(A3) 110v 1unit harga Rp 4.500.000,- (SOLD OUT)
Laserjet 8150DN(A3) 110v 1unit harga Rp 5.000.000,- (SOLD OUT)
Penjualan termasuk : Toner Remanufacture, Kabel Printer, Kabel Power, Step Down.
Warranty 1 bulan.

ERROR CODE CANON MP145/MP160

2009-01-22T12:44:00.000+07:00

ERROR CODE CANON MP145/MP160 :

E2-2 = tidak ada kertas (ASF)
E3-3 = Paper jam
E4 = tidak ada tinta/cartridge
E5-5 = ink cartridges tidak terpasang atau cartirdge yang terpasang salah (tidak compatibel)
E8 = absorber full, atau platen waste ink absorber full mita direset
E9 = hubungan ke digital camera / video camera tidak support
E14 = Ink cartridges whose destination are wrong
E15 = Ink cartridge tidak terpasang E16 - Ink remaining is unknown
E16 -E19 = masalah pada scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error (bagian cleaning head)
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = ink absorber full or platen waste ink absorber full > reset dengan toolsnya
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = motor driver tidak normal
E40 20 = hardware lain error
E42 22 = Scanner error

2009-01-06T19:56:00.002+07:00

79.XXXX
A critical hardware error has occurred.

8X.YYYY EIO ERROR
The EIO accessory card has encountered a critical error.

2009-01-06T19:52:00.002+07:00

64 ERROR
A scan buffer error has occurred.
1. Turn the device off and then on.
2. If the message persists, replace the formatter.

68.X PERMANENT STORAGE FULL
A non-volatile storage device is full. Press to clear the message. Printing can continue, but unexpected behavior could result.
X Description
0 Onboard NVRAM
1 Removable disk (flash or hard)
3. Perform an NVRAM initialization.
4. If the message persists, replace the formatter

2008-12-26T08:40:00.002+07:00

59.50 ERROR
A main motor (M1) error has occurred. Motor operation is verified during device power-up.
Verify that nothing is hindering the main motor. If necessary, remove all paper trays and the print cartridge, and then turn on the device and listen for motor operation.
Verify that the main motor is connected to connector on the ECU. If the message persists, replace the motor.

62 NO SYSTEM
No system was found. Replace the formatter.

64 ERROR
A scan buffer error has occurred. Replace the formatter.

68.X PERMANENT STORAGE FULL
A non-volatile storage device is full. Press to clear the message. Printing can continue, but unexpected behavior could result.
X Description
0 Onboard NVRAM
1 Removable disk (flash or hard)
Perform an NVRAM initialization. If the message persists, replace the formatter.

2008-12-26T08:27:00.004+07:00

54.XX ERROR
A device command error has occurred.

55.XX.YY DC CONTROLLER ERROR
The engine is not communicating with the formatter.
1. Verify that the flat ribbon cable between the ECU and the formatter PCA is connected.
2. If the message persists, replace the ECU. If the message still persists,replace the formatter.

57.03 ERROR (FM2) & 57.04 ERROR (FM1)
A sub cooling fan error has occurred. Fan operation is verified during device powerup.
Fan operation occurs only during powerup or during a print job.
1. Verify that nothing is hindering or blocking the fan.
2. Verify that the fan is connected to connector on the ECU PCA.
4. If the message persists, replace the fan.

53.10.01 ERROR UNSUPPORTED RAM

2008-12-07T16:04:00.002+07:00

53.10.01 ERROR UNSUPPORTED RAM
The memory DIMM is not a supported DIMM. Install a supported DIMM.

52 ERROR

2008-12-07T16:02:00.001+07:00

52.00 ERROR
A scanner motor error has occurred. Scanner motor rotation is verified at the initialization of
a print job.
1. Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly.
2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection.
3. Verify that the ribbon cable installed in connector J403 on the ECU is fully seated. You must remove the ECU in order to verify this connection.
4. If the message persists, replace the laser/scanner assembly

51 ERROR

2008-12-07T16:00:00.000+07:00

51.XY ERROR
A device error has occurred.
1. Press to continue or press for more information.
2. If the message persists after exiting help, turn the device off and then on.
3. If the message persists, contact HP Support.

Fuser Error

2008-12-07T15:23:00.003+07:00

50.1 FUSER ERROR
AC power is not being provided to the fuser assembly. AC voltage is necessary to generate heat in the fuser assembly.
1. Verify that the fuser power cable at the back of the device is connected and the ECU is fully seated.
2. If the message persists, replace the fuser assembly.

50.6 FUSER ERROR
The main or sub thermistors are unable to provide temperature feedback to the ECU.
The main and sub thermistors monitor the fuser assembly hot-roller temperature and provide feedback to regulate the fusing temperature.
1. Verify that the seven-wire connector is firmly seated in connector J405 on the ECU. You might have to remove the main cooling fan to see this connection.
2. Verify that the four-wire connector at the rear of the device is firmly seated in the fuser assembly.
3. Verify that the AC voltage is being
provided to the fuser assembly.
4. If the message persists, replace the
fuser assembly.

Mainboard Epson LX-300+ II

2008-12-05T15:34:00.002+07:00

MainBoard Epson LX-300+ II Price Rp 400.000

41.3 UNEXPECTED SIZE IN TRAY

2008-12-01T07:37:00.003+07:00

41.3 UNEXPECTED SIZE IN TRAY
LOAD TRAY X
Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.
1. Press to print from a different tray.
2. To print from the current tray, load the tray with the size and type indicated.
Ensure that all trays are configured correctly before printing again.

41.5 UNEXPECTED TYPE IN TRAY X
The device senses a different media type than what is configured in the tray.
1. Press to print from a different tray.
2. To print from the current tray, load the tray with the size and type indicated.
Ensure that all trays are configured correctly before printing again.

41.X ERROR
A device error has occurred.
1. If the message persists after exiting help, turn the device off and then on.
3. If the message persists, contact HP Support.

49.XXXXX ERROR
A critical firmware error has occurred.
1. Turn the device off and then on.
2. Try to determine whether the error occurs intermittently, while printing, or when turning on the device.
3. If the error appears while printing, determine whether it occurs when printing from a specific computer, a specific application, or a specific file. If all other computers, applications, or files
can print without the error, then the problem may be only within one print job or computer. Make sure the computer has the most current printer drivers, or use a generic printer driver.
4. Go to www.hp.com. Click Download Drivers andSoftware. Check for the latest firmware
image version at the bottom of the page. If this firmware image is newer than the one installed on the device and the device can receive a firmware update, download the newer firmware upgrade.
5. Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job, contact the software vendor for assistance.
6. If the message persists, contact HP Support.

40 BAD SERIAL TRANSMISSION

2008-12-01T07:34:00.001+07:00

40 BAD SERIAL TRANSMISSION
A serial data error (parity, framing, or line overrun) has occurred while the device was receiving data.

40 EIO X BAD TRANSMISSION
A connection with the card in the EIO slot has broken.

40 EMBEDDED I/O BAD TRANSMISSION
The connection with the HP Jetdirect embedded print server has broken.

22-EIO X BUFFER OVERFLOW

2008-12-01T07:30:00.002+07:00

22-EIO X BUFFER OVERFLOW
For devices with an EIO device only.
The device EIO card in slot X has overflowed its I/O buffer during a busy state.

22-EMBEDDED I/O BUFFER OVERFLOW
The embedded HP Jetdirect print server buffer has overflowed during a busy state

22-PARALLEL I/O BUFFER OVERFLOW
The device parallel buffer has overflowed during a busy state.

22-SERIAL I/O BUFFER OVERFLOW
The device serial buffer has overflowed during a busy state.

22-USB I/O BUFFER OVERFLOW
The device's USB buffer has overflowed during a busy state.

21 PAGE TOO COMPLEX

2008-12-01T07:23:00.002+07:00

21 PAGE TOO COMPLEX
The page-compression process is too slow for the device. Some data may be lost on the page.
1. Press to see step-by-step information.
2. To print the job with some data loss, press ? to exit the message, If data is lost, simplify the page content to reduce its complexity.
3. To exit, press ?.