Achute Tech

I've read the first part and followed every st...

2016-07-16T12:10:32.596+05:30

I've read the first part and followed every steps; however, my rogue access point still doesn't provide internet(veven with echo 1 > /proc/sys/net/ipv4/ip_forward ).

echo 1 > /proc/sys/net/ipv4/ip_forward Please...

2016-07-14T16:34:56.980+05:30

echo 1 > /proc/sys/net/ipv4/ip_forward

Please read the first part.

People are able to connect, but there is no intern...

2016-07-14T13:39:18.126+05:30

People are able to connect, but there is no internet.
How can I fix that?

Please could you elaborate the problem , and once ...

2015-07-31T14:23:56.226+05:30

Please could you elaborate the problem , and once try again from scratch. It should work.

people are unable to connect, first time it worked...

2015-07-30T22:12:32.736+05:30

people are unable to connect, first time it worked but after that its not working

Just admiring your work and wondering how you mana...

2015-06-15T11:44:35.540+05:30

Just admiring your work and wondering how you managed this whing so well. It’s so remarkable that I can’t afford to not go through this valuable information whenever I surf the internet!
see us at: get followers on twitter

This is another method I dont get to work, can ann...

2015-04-06T01:43:34.898+05:30

This is another method I dont get to work, can annyone see what im doing wrong?

$ ifconfig

#My internet is coming from wlan1 "inet addr:192.168.0.104 Bcast:192.168.0.255 Mask:255.255.255.0"

$ airmon-ng start wlan0
$ airbase-ng --essid "FakeAP" mon0

######This far everything is OK, I can se the "FakeAP" from other computers. But I need to asign IP`s.

#Verfiy details of logical access point interface
$ ifconfig at0

at0 Link encap:Ethernet HWaddr 10:08:b1:1e:be:b7
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

#Create a bridge interface (To chek Iw briged at0 to wlan1 (internett) and wlan0 (mon0))
$ brctl addbr myBridge

#Now, associate real interfaces (wlan1 and at0) to bridge interfaces
#I needed to run this command to make it work: $ iw dev wlan1 set 4addr on
$ brctl addif myBridge wlan1
$ brctl addif myBridge at0

#Verfiy details of new bridge interface
$ brctl show

#bridge name bridge id STP enabled interfaces
#myBridge 8000.1008b11ebeb7 no at0
wlan1

######Looks like wlan1 (internett) and at ("FakeAP"?) are connected.

#Remove the IP address of wlan1 and at0 interfaces
$ ifconfig wlan1 0.0.0.0 up
$ ifconfig at0 0.0.0.0 up

#Assign IP address to bridge interface we have created earlier. You can use your old wlan0 IP address or assign any IP free address on your network
$ ifconfig myBridge 192.168.0.104/8 up

$ ifconfig myBridge
myBridge Link encap:Ethernet HWaddr 10:08:b1:1e:be:b7
inet addr:192.168.0.104 Bcast:192.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::1208:b1ff:fe1e:beb7/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:648 (648.0 B)

######It looks like my bride has an assigned IP. The One From wlan1

#Enable IP forwarding on your computer. In other word, your computer will work as a router. IT will perform NATing.
$ echo 1 > /proc/sys/net/ipv4/ip_forward

######Try to restart "FakeAP"

$ airbase-ng --essid "FakeAP" mon0
16:06:20 Created tap interface at0
16:06:20 Trying to set MTU on at0 to 1500
16:06:20 Access Point with BSSID 10:08:B1:1E:BE:B7 started.
Error: Got channel -1, expected a value > 0.
16:06:26 Client 00:E3:B2:C2:3B:F0 associated (unencrypted) to ESSID: "FakeAP"
16:06:26 Client 00:E3:B2:C2:3B:F0 associated (unencrypted) to ESSID: "FakeAP"
16:06:26 Client 00:E3:B2:C2:3B:F0 associated (unencrypted) to ESSID: "FakeAP"

######And the latest lines just repeats itselves, and the computer trying to connect with dont get an IP. WHat am I doing wrong.

My devices dont get an IP. The .config is as you d...

2015-04-06T01:41:46.230+05:30

My devices dont get an IP. The .config is as you described. And it looks like the server is starting. Iw bin trying to make a rouge AP for almost a week now, and your guide is by far the easyest and most self explaining. But please help me and the others with the IP problem.

My devices dont get an IP. The .config is as you d...

2015-04-06T01:41:32.345+05:30

I Have Best Gopcpro Online Tech Support Services ...

2014-11-06T22:18:23.813+05:30

I Have Best Gopcpro Online Tech Support Services

More Info Visit Here: http://gopcpro.com

good bro..but air crack-ng is better operated with...

2014-08-20T11:20:44.788+05:30

good bro..but air crack-ng is better operated with comm view for wifi...

Thank you so much I had join in techguy.org today ...

2014-08-14T12:11:11.405+05:30

Thank you so much I had join in techguy.org today and Here's an another website for Technology Handsets

http://www.techialerts.com

Yes in order to do that we need to bridge the inte...

2014-08-07T00:13:38.552+05:30

Yes in order to do that we need to bridge the interfaces using the " brctl " command .

Its is generally not available in Kali linux so you need to install it using
" apt-get install bridge-utils "

try to search for the brctl command in google .. If you arent able to do it, I will try to recreate the scenario in my own laptop and let you know.

how to share the internet connection (from eth0, w...

2014-08-06T02:32:04.390+05:30

how to share the internet connection (from eth0, wlan1/0, pppoe0) to at0 ? is no use if the victim doesn't get internet connecting to our fake ap. (i did read the part 2)

@Kemp Ross , If the other devices are not getting ...

2014-06-07T20:14:37.859+05:30

@Kemp Ross , If the other devices are not getting ip address that means something is wrong with the DHCP server . Please read the above mentioned steps , to configure the dnsmasq , If it still fails , I will be happy to guide you.

@Angchung .. That means other service is using the...

2014-06-07T20:10:18.833+05:30

@Angchung .. That means other service is using the same port , my best guess restart your laptop and try once more , If the problem persists , i will try to solve it in my laptop and let u know..

help ! i get the access point started but clients ...

2014-06-06T10:18:31.174+05:30

help ! i get the access point started but clients aren't assigned any ip addresses. when i try to use the browser on the associated machine it says no internet connection

i get the access point started but when i try to c...

2014-06-06T10:15:21.447+05:30

i get the access point started but when i try to connect to it they are not getting any ip addresses. don't know what wrong..... need help figuring this out

I am always searching online for articles that can...

2014-05-22T18:56:58.314+05:30

I am always searching online for articles that can help me. There is obviously a lot to know about this. I think you made some good points in Features also. Keep working, great job!
video marketing forum

there is another gadget website having a forum rel...

2014-02-28T18:28:52.743+05:30

there is another gadget website having a forum related to gadget only

http://mygadgetreview.in/

thank you so much

2013-12-19T08:17:31.051+05:30

thank you so much

You have missed one of the best technology forum i...

2013-12-14T18:42:25.068+05:30

You have missed one of the best technology forum in this list that is http://techpluck.com

Help! I have got a problem. It says failed to bi...

2013-08-27T22:24:16.351+05:30

Help!

I have got a problem.
It says failed to bind dhcp server socket. Already in use

Very good nice list thank you

2013-06-10T02:12:32.203+05:30

Very good nice list thank you

yes beemp3 was nice but nowdays difficult to downl...

2013-04-23T10:18:50.283+05:30

yes beemp3 was nice but nowdays difficult to download songs try http://hippomp3.com its nice and good