techm@xsupport.blogspot

D-Link wirless Controller

noreply@blogger.com (Anonymous) — Wed, 27 Mar 2013 05:02:00 +0000

DWS-3160-24PC

System

Size

19-inch Sandard Rack-Mount Width, 1U Height

Network Interfaces

20 10/100/1000Base-T
4 Combo 10/100/1000Base-T/SFP

Console Port

RJ45 RS-232

MAC Address Table

Maximum Power Consumption

467 W (full POE load)

Performance

Switching Capacity

48 Gbps

Maximum Forwarding Rate

35.71 Million Packets per Second

Forwarding Method

Store and Forward

Packet Buffer Memory

Up to 256 static MAC entries
Enable/disable auto-learning of MAC addresses

802.3af Power over Ethernet

15.4 W Per Port
370 W Total Power Budget
740 W Total Power Budget With RPS

Number of VLANs per Device

Static Routes

Jumbo Frames

Physical

MTBF

282,541 hours

Acoustic

Below 30 °C (86 °F)< 39.8 dB
Over 30 °C (86 °F):< 51.8 dB

Heat Dissipation

With 370 W PoE load: 1593.5 BTU/hr

Dimensions

440 x 310 x 44 mm (17.32 x 12.20 x 1.73 inches)

Redundant Power Supply

DPS-700

Weight (without optional module)

5.24 kg (11.55 pounds)

Operating Temperature

0 to 50 °C (32 to °F)

Storage Temperature

-40 to 70 °C ( to 158 °F)

Operating Humidity

10% to 90% RH

Storage Humidity

5% to 90% RH

EMI Certifications

FCC Class A
CE
ICES-003
C-Tick
VCCI

Safety

UL/cUL
CB

Software Specifications

Management

Manages up to 48 Unified Access Points per switch, up to 192 APs per cluster
Switch Cluster for Single IP Management
SSH
SSL
SNMP v1, 2c, 3
sFlow
Dual Image Support
Web GUI
Command Line Interface

AP Management

AP Auto-Discovery
Remote AP Reboot
AP Monitoring: List Managed AP, Rogue AP, Authentication Failed AP
Client Monitoring: List clients associated with each Managed AP
Ad-hoc Client Monitoring
AP Authentication Supporting Local Database and External RADIUS Server
Centralized RF/Security Policy Management
Automatic AP RF Channel Adjustment
Automatic AP Transmit Output Power Adjustment
Centralized Firmware Upgrade

Managed Unified Access Points

DWL-3600AP
DWL-6600AP
DWL-8600AP

Roaming

Fast Roaming
Intra-Switch/Inter-Switch Roaming
Intra-Subnet/Inter-Subnet Roaming

Access Control & Bandwidth Management

Up to 32 SSID per AP (16 SSID per frequency band)
AP Load Balancing based on the number of users or AP utilization
Flexible Mapping Schemes

L2 Features

IGMP Snooping
MLD Snooping
802.1D/w/s Spanning Tree
802.3ad Link Aggregation
802.1ab LLDP
Port Mirroring (One-to-One and Many-to-One)
Jumbo Frame Size: Up to 13 KB

L3 Features

IPv4/v6 Static Route
Routing Table Size: 512 Static Routes
VRRP
ARP Proxy

LAN Security

RADIUS Authentication Management Access
TACACS+ Authentication for Management Access
SSH & SSL Support
MAC Filtering
802.1X Port-based Access Control & Guest VLAN
Denial of Service Protection
Dynamic ARP Inspection
Protected Port
Broadcast Storm Control
Access Control List

MIB

1213 MIB II
1493 Bridge MIB
1907 SNMP v2 MIB
1215 Trap Convention MIB
2233 Interface Group MIB
D-Link Private MIB
LLDP MIB
Power-Ethernet MIB

LAN Flow Control

802.3x Standard in Full Duplex Mode
Back Pressure in Half Duplex Mode
Head-of-Line Blocking Prevention

QoS (Quality of Service)

Voice VLAN
Wireless Multimedia (WMM)
802.1p Priority Queues
CoS-based QoS
Per-Flow Bandwidth Control
Per-Port Traffic Shaping
Minimum Bandwidth Guarantee

VLAN

802.1Q VLAN Tagging
802.1V
Subnet-based VLAN
MAC-based VLAN
GVRP
Double VLAN
Voice VLAN

WLAN Security

WPA Personal/Enterprise
WPA2 Personal/Enterprise
64/128/152-bit WEP Data Encryption
MAC Authentication
Station Isolation
Wireless Station and AP Monitoring based on RF Channel, MAC Address, SSID, Time
Rogue AP and Client Detection & Mitigation
Captive Portal
Security Profile
802.1X Support
Guest VLAN

Ordering Information
DWS-3160-24PC

Unified Wireless Gigabit 24 Port PoE L2+ Switch with 12 AP license

DWS-3160-24TC

Unified Wireless Gigabit 24 Port L2+ Switch with 12 AP license

DPS-700

D-Link Redundant Power Supply 589 watts, 1+1 PoE budget

DPS-200

D-Link Redundant Power Supply 60 watts, 1+1 PoE budget

DWL-8600AP

Unified Concurrent Dual-band Access Point 802.11a/b/g/n

DWL-6600AP

Unified Concurrent Dual-band Access Point 802.11a/b/g/n

DWL-3600AP

Unified Access Point 802.11b/g/n

DWS-3160-24TC-AP12-LIC

DWS-3160AP-24TC Upgrade License for 12 APs

DWS-3160-24TC-AP24-LIC

DWS-3160AP-24TC Upgrade License for 24 APs

DWS-3160-24PC-AP12-LIC

DWS-3160AP-24PC Upgrade License for 12 APs

DWS-3160-24PC-AP24-LIC

DWS-3160AP-24PC Upgrade License for 24 APs

AMP cable

noreply@blogger.com (Anonymous) — Wed, 27 Mar 2013 05:00:00 +0000

Twisted Pair Cable

Category 6 UTP Cable

Meets or exceeds TIA/EIA-568-B Category 6 and ISO Class E 11801:2002 specifications
Performance characterized to 600 MHz
3dB NEXT performance above Category 6 standards
Independently verified by Intertek ETL/SEMKO testing services
Intertek ETL/SEMKO Listed cUS (CMR/CMP)
Exceeds all requirements for Gigabit Ethernet (IEEE 802.3ab)
Lead-free jacketing
23 AWG, solid conductors

Category 6A F/UTP (ScTP) Cable

Meets or exceeds TIA/EIA-568-B.2-10 Augmented Category 6 and ISO 11801 Edition 2.1 Class E_A specifications
UL Listed cUS (CMR/CMP)
Independently verified by Intertek ETL/SEMKO testing services
Exceeds all requirements for Gigabit Ethernet (IEEE 802.3ab)
Exceeds all requirements for IEEE 802.3an, 10 Gigabit Ethernet
23 AWG, solid conductors
Lead-free (no heavy metals)

Category 6e UTP Cable
	Meets or exceeds TIA/EIA-568-B Category 6 and ISO 11801:2002 Class E specifications Performance characterized to 600 MHz 8 dB NEXT performance above Category 6 Intertek ETL SEMKO Listed cUS (CMR/CMP) Independently verified by Intertek ETL SEMKO testing services Exceeds all requirements for Gigabit Ethernet (IEEE 802.3ab) Lead-free jacketing 23 AWG, solid conductors

CISCO

noreply@blogger.com (Anonymous) — Tue, 26 Mar 2013 10:02:00 +0000

Cisco UCS, Nexus, NetApp – FCoE End to End Config

I am sick of cables. One of the most recent vSphere hosts I deployed had ELEVEN Gigabit Ethernet cables attached to it…and I actually have one that has Fourteen! So, one of my goals when looking at deploying UCS was a setup that utilized 10gb Ethernet and FCoE everywhere.

Well, it’s almost end to end. It’s actually not possible to do FCoE end to end today, and you might read about the need for “FCoE Multi Hop”. FCoE is as it is described, an implementation of Fibre Channel over Ethernet. How it works is you basically establish an Ethernet infrastructure, and the FC (which is really just standard FC) runs over “Virtual FC” ports. In order for this to be done completely end to end you need N_port Virtualization support on all devices in the chain. This support exists today on the latest code for the Nexus switches, but not on the code for the UCS Fabric Interconnects (although I am told it is coming soon). My temporary solution was to order my Fabric Interconnects with the expansion module that has Four 10gb Ethernet ports and Four 4gb Fibre Channel ports.

There are several models you can plug into the expansion slot on the FI’s but I chose this one for the following reasons:

· It has more than enough FC ports for my immediate needs, and the extra 10gb ports mean it will continue to be useful when the FI software is updated to allow NPV.

· Ports on addon modules include “Free Port Licenses”, so I will be able to add another couple of UCS Chassis down the road without paying the ridiculous port licence costs (the one thing about UCS I don’t like).

For now, this is what I’m describing. Blue lines are 10gb Ethernet, Green are traditional Fibre Channel:

Hardware Breakdown

The config described below consists of the following hardware:

· 1 UCS Blade Chassis (Cisco 5108)

· 2 UCS Fabric Interconnects (Cisco 6120XP w/ 4x10GB & 4x4GB FC Expansion Module)

· 2 Cisco Nexus 5548UP Switches (with Layer3 Daughtercard)

· 1 NetApp 3210 Filer (with Dual Controllers)

What about VPC on the switches?

VPC is a great thing. It lets you create a port-channel between a device and two separate switches, but from the device’s point of view the connections are going to the same device. Lose a switch, nothing goes down. We have the Nexus Switches connected in a VPC Peer Link (not shown in the diagram above). The only challenge here is that a properly built Fibre Channel design calls for two completely separate fabrics; this is taken into account in the configs below.

Fabric Interconnect <-> Nexus (Ethernet) Config:

I have two 10gb links between each Fabric Interconnect and it’s corresponding Nexus Switch (no cross connections). These are port-channelled in the traditional way to keep service in the event of port, transceiver, or cable loss.
On the UCS Side it’s easy to establish the port channel. For each Fabric (A and B) just right click on Port Channels under the LAN tab and select Create Port Channel. Give it a name and select your uplink ports. When done, the UCS interface will look similar to the below:

On the Nexus side, the following configs are in place on both switches:

Pretty simple stuff. When done, do a “show port-channel summary” command from both switches and you should see them up as so:
201 Po201(SU) Eth LACP Eth1/17(P) Eth1/18(P)

Fabric Interconnect <-> Nexus (Fibre Channel) Config:

On the UCS Side, you don’t actually have to do anything for the actual FC Uplinks. UCS considers any traditional FC port an FC Uplink. What you DO have to do is define your VSAN’s for those uplinks. Although much of our Ethernet infrastructure is designed to allow packets to flow in multiple paths, with FC the mentality is you define 2 exact paths and if there is a failure somewhere along one of them, the whole path is just down (and therefore packets should be transmitted along the other path). We do this in our FCoE setup by defining a different VSAN for Fabric A and Fabric B. Since in this example the SAN is a NetApp 3210, I used VSAN3210 for Fabric A and VSAN3211 for Fabric B.
In your UCS Console, under the SAN Tab, open up SAN Cloud, then Fabric A. Right click on VSANs and define VSAN3210 as shown:

Notice you have to define an FCoE VLAN as well? We’ll get to that in a bit. You can make this a different number if you want but it’s much easier to work with if you keep the numbers the same. Make very sure that Default Zoning is set to Disabled, and that the fabric is set to Fabric A.
Now repeat this for Fabric B; using the number 3211 instead of 3210, and making sure to select the Fabric B radio button.

JOB available

noreply@blogger.com (Anonymous) — Fri, 22 Mar 2013 04:53:00 +0000

Technical Support Executive

Positions:                           2 positions

Location:                            Karachi

Education:                          BS Computers/ Graduation

Experience:                       1 year (in Similar
Position)/Fresher can also Apply

Remuneration:                  Market Competitive salaries, Performance Incentives

Timings:                             24/7 shifts on
Rotation



Summary:

·        
Must have very strong verbal communications
Skill and good interpersonal skills.
·        
Excellent troubleshooting skills
and technical knowledge is a must.
·        
Basic Knowledge of Networking.
·        
Ability to work different shifts
in a 24x7 environment.
·        
Excellent analytical skills.
·        
CCNA or equivalent hands on
experience preferred. 
·        
Answer all incoming technical
support calls in queue with appropriate opening script, log all calls, walk
customers though the trouble shooting steps.
·        
Troubleshoot Internet
connectivity, browser configurations, personal firewalls, email issues, VPN
Connectivity and TCP/IP issues.
·        
Troubleshoot LAN, WLAN, DSL,
TCP/IP,DNS
·        
Responsible for handling customer
calls with a positive problem-solving attitude.
·        
Provide input for troubleshooting
procedures and diagnostic tools
·        
Properly document all calls in
CRM.
·        
May
also perform additional duties such as; preventative maintenance and or other
IT services.


Note:  This is 24X7X365 work environment;
please don’t apply if you are looking to
a 9X5 job.





Appy at :  tech.jobs.khi@gmail.com
 "

ISP JOB available

noreply@blogger.com (Anonymous) — Fri, 22 Mar 2013 04:53:00 +0000

Connect ISP Hiring support engineer in Karachi. Send resume at murtazafhussain@gmail.com

Juniper SRX- 210E

noreply@blogger.com (Anonymous) — Tue, 19 Mar 2013 04:56:00 +0000

SRX-210E

Today JOB 3-15-2013

noreply@blogger.com (Anonymous) — Fri, 15 Mar 2013 04:53:00 +0000

JOB @ 360training.com

Well, guyz there is a vacancy at 360training company details are mention:

Senior Network Administrator:
-candidate must have a experience atleast 5-6 years
-Linux
-windows server
-web server
-SQL & MySQL

Required:
Bachelor/Master Degree in Computer Science

Apply at pkjobs@360training.com

JOBS AVAILABLE

noreply@blogger.com (Anonymous) — Thu, 14 Mar 2013 04:47:00 +0000

JOB AVAILABLE

The following positions are open at Mimsoft Solutions:
----------------------------------------------------------
1. Microsoft Active Directory/ Server : (6 Positions)
Basic Knowledge of Microsoft server , Active directory . Fresh Computer Science graduates with knowledge and certifications of the above said products

----------------------------------------------------------
2. Microsoft Exchange : (3 Positions)
Should have at least 2 years Experience of managing enterprise level exchange services. Basic knowledge of Backups , services, replication and cluster environment

----------------------------------------------------------
3. Microsoft Sharepoint: Experienced Resource -(2 positions)
At least 2 years experience of deployment , Administration and Support. Should have detailed overview of :

1. SharePoint backend administration
2. SharePoint backup and disaster recovery
3. SharePoint Monitoring and Reporting
4. SharePoint Workflow
5. SharePoint designer
6. SharePoint Excel Services
7. SharePoint Business Intelligence
8. SharePoint Enterprise Search

at least 3 year overall experience of development on .net (preferable c#) web applications

----------------------------------------------------------
4. Microsoft sharepoint (Entry Level resource) (3 Positions)
entry level resource with good learning skills and overall concept of the Sharepoint 2010 development and Administration.

----------------------------------------------------------
5.Microsoft systems Engineer :(Experienced)
should have good experience on Microsoft Exchange 2010, Windows Server,Active Directory , Microsoft system Center. capable of handling environments with more than 2000 Users. should at least 4 years experience
----------------------------------------------------------

The candidate should be a team player, hardworking and have the urge to learn new technologies and methodologies. Preferred Graduate with Computer Science as major. Candidates with Certifications will be preferred but non-certified candidates are also encouraged to appy

Kindly mention the position you are applying for in the subject line
Include the following in your resume:
-projects undertaken -
-If on job current salary
-Expected Salary.

email to the following address:
work@mim-soft.com

Linux Backup list of software

noreply@blogger.com (Anonymous) — Wed, 13 Mar 2013 09:25:00 +0000

10 outstanding Linux Backup

1-fwbackups

2-Bacula

3-Rsync

4-Mondorescue

5- Simple Backup Solution

6- Amanda

7 – Back In Time

8 – Arkeia

9 – Box Backup

10 - Kbackup

Network Solution

noreply@blogger.com (Anonymous) — Wed, 13 Mar 2013 07:36:00 +0000

Network Engineer

noreply@blogger.com (Anonymous) — Wed, 13 Mar 2013 06:40:00 +0000

TCP Feature!

1. TCP three way handshake

2. TCP Sequence Number

3. TCP Flow Control

4. TCP Windowing

TCP Three way handshakes: When a machine wants to communicate with each other machine over the network three processes happen before the actual communication starts.

a. Sync.

b. Acknowledgement.

c. Sync acknowledgement.

The Source PC first sends a sync message to the destination Machine in order to know if the destination is ready for communication & waits for Acknowledgement message from the destination machine, when destination Machine receives the sync message it reply with yes or no acknowledgement message, finally if the acknowledgment message was yes the source machine

send Sync Acknowledgement message and the communication begins.

¤: Here I have made a simple picture which illustrates the three process of three way handshake.

The Source PC is named PC1 & the destination PC is named PC2

What happens when source & destination want to terminate the communication?

When both end want to terminate the communication three process take place as shown bellow.

The Source Machine sends a finish message, the destination machine reply an acknowledgement and finally the source machine sends a finish acknowledgement message & the communication gets over.

TCP Sequence Number: TCP sequence number and acknowledgment number is one of the features of TCP which adds a number to each packets it sends over the network, when the destination receives the packets it reads the sequence number of received packets and sends an acknowledgement message to

the sender of the Packets, if any packet was missing then the TCP automatically resend that packet which Is missing.

For example: 10 MB of data is divided into 10 packets (each packet 1 MB), when the packets are about to be sent TCP automatically adds a number which we call sequence number to each packet and when the destination receives the packets it reads the number from 1 to 10 and send acknowledgement back to the sender as it receives them in order to guarantee data delivery. If the destination machine send ok acknowledgement for 1st, 2nd, 4th, 5th and so on but does not send ok acknowledgement for 3rd packet, then the source pc (sender of the packets) automatically resends the missing packet which it has not received ok acknowledgement for.

TCP Flow Control: TCP three way handshakes and TCP Windowing Helps the flow control, I think it is better to let you know TCP Windowing first and then I should talk about TCP flow control.

TCP Windowing: if data transferring is in process TCP decides the Window size and transfer that. If enough bandwidths are available then TCP increases the size of window in order to transfer more data

Window Size= Number of packets sent at a time

Each Window has one Acknowledgment message.

noreply@blogger.com (Anonymous) — Wed, 13 Mar 2013 06:38:00 +0000

TCP Feature!

1. TCP three way handshake

2. TCP Sequence Number

3. TCP Flow Control

4. TCP Windowing

TCP Three way handshakes: When a machine wants to communicate with each other machine over the network three processes happen before the actual communication starts.

a. Sync.

b. Acknowledgement.

c. Sync acknowledgement.

send Sync Acknowledgement message and the communication begins.

¤: Here I have made a simple picture which illustrates the three process of three way handshake.

The Source PC is named PC1 & the destination PC is named PC2

What happens when source & destination want to terminate the communication?

When both end want to terminate the communication three process take place as shown bellow.

3 FIN Ack

the sender of the Packets, if any packet was missing then the TCP automatically resend that packet which Is missing.

TCP Flow Control: TCP three way handshakes and TCP Windowing Helps the flow control, I think it is better to let you know TCP Windowing first and then I should talk about TCP flow control.

Window Size= Number of packets sent at a time

Each Window has one Acknowledgment message.

S Ack

R Ack

C E

Ack

One Packet

Tow Packets E S

T I N

Four Packets A T

I O N

Microsoft Study

noreply@blogger.com (Anonymous) — Tue, 12 Mar 2013 11:14:00 +0000

MICROSOFT CERTIFICATION:

Course-1
Exchange 2010

Course-2

Microsoft LYNC

Course-3

MCSA 2012 [70-410, 70-411, 70-412]
TMG

Course-4

SCVMM [system center virtual machine Manager 2012]
Hyper-V

Course-5
Windows7
Windows8

10 sessions [ 1 session = 3 Hour]

2 Session Per weekend

Each course = 1 person cost 8000/-

NOTE:
All courses Teacher are IT & vendor Industries Based. Any group want to study Microsoft related courses email at:

abdulwadoodkhan@hotmail.com

Cisco 881 Router: rommon mode

noreply@blogger.com (Anonymous) — Mon, 11 Mar 2013 09:55:00 +0000

Nowadays, i have configure CISCO 881 Router . yesterday, i have done my whole configuration ith save command:
#wr mem
[configuration save]

Today when i access the router i show me this mode

rommon 1 >

IT guyz dont worry this will happen.

When a router/switch stuck in ROMMON mode, the first thing you need to check is the configuration register value.

The normal operation configuration register value is 0x2102, you can verify the value using the confreg command in the ROMMON prompt, or using show version in the normal prompt.

Here is the output you get if you have no problem with the configuration register:

rommon 1 > confreg

Configuration Summary
enabled are:
load rom after netboot fails
console baud: 9600
boot: image specified by the boot system commands
or default to: cisco2-C2600

do you wish to change the configuration? y/n [n]:

And this is the output if you have the wrong configuration register:

rommon 2 > confreg

Configuration Summary
enabled are:
load rom after netboot fails
console baud: 9600
boot: the ROM Monitor

do you wish to change the configuration? y/n [n]:

With the confreg command, you'll also prompted if you want to change the configuration register value. Type y if you want to change it or type n or press enter if you want to leave it.

If you type y, you'd be taken to a series of questions, just answer no to all but the change the boot characteristics, set the value on the next prompt to 2.

rommon 2 > confreg

Configuration Summary
enabled are:
load rom after netboot fails
console baud: 9600
boot: the ROM Monitor

do you wish to change the configuration? y/n [n]: y
enable "diagnostic mode"? y/n [n]:
enable "use net in IP bcast address"? y/n [n]:
disable "load rom after netboot fails"? y/n [n]:
enable "use all zero broadcast"? y/n [n]:
enable "break/abort has effect"? y/n [n]:
enable "ignore system config info"? y/n [n]:
change console baud rate? y/n [n]:
change the boot characteristics? y/n [n]: y
enter to boot:
0 = ROM Monitor
1 = the boot helper image
2-15 = boot system
[0]: 2

Configuration Summary
enabled are:
load rom after netboot fails
console baud: 9600
boot: image specified by the boot system commands
or default to: cisco2-C2600

do you wish to change the configuration? y/n [n]: n
You must reset or power cycle for new config to take effect

so at my case i just Reset the device using the following command:
rommon 3 > reset

After this command, It will decompress the image and start loading the device normally.
rommon 2 > boot flash:c2600-i-mz.122-10b.bin
program load complete, entry point: 0x80008000, size: 0x51c0dc
Self decompressing the image : #################################################
##################################

Emerson Liebert MPH PDU: System Monitoring and Control

noreply@blogger.com (Anonymous) — Mon, 11 Mar 2013 07:38:00 +0000

Emerson Rack PDU overview

noreply@blogger.com (Anonymous) — Mon, 11 Mar 2013 07:30:00 +0000

Reliable power distribution in a server rack is extremely important! Emerson Network Power's "Power Distribution

Units (PDU)" provide immense security and availability with a robust electromechanical setup.

The rack PDUs ensure a sound economical beneﬁt. The Liebert MPX 's modularity also enables requirements-oriented and constantly compatible expansion’s

JOB in saudia IT MS dynamic AX 2009

noreply@blogger.com (Anonymous) — Sun, 10 Mar 2013 10:26:00 +0000

Job in Saudia Arab related to microsoft product dynamic AX 2009

JOB - Network Design Expert

noreply@blogger.com (Anonymous) — Sat, 09 Mar 2013 21:20:00 +0000

Network Design Expert

USAID Power Distribution Program - Lahore (Pakistan)

Job Description

NDE will be responsible for designing all aspects of the technical network design (LAN & WAN) for very large public sector corporates. The NDE must have working knowledge of Intra and Internetworking concepts in so far as it applies to and Data Communications. The NDE will supervise and assist the vendors’ technical staff in the installation of the network infrastructure. He/she will also coordinate and liaise with Software Application and Database Expert and Virtualisation Systems Expert for an optimal and extendable solution.

Experienced in:

Design of IP addressing scheme, subnetting, route summarization etc.
Creation of DMZs
Networks administration;
Day to day infrastructure Support;
System maintenance and upgrades;
Developing SOPs and other relevant Documentation;
Consolidation, availability (HA, FT) and resources Management in virtualized environments;
Extensive Networking knowledge and experience of all LAN and routing protocols (TCP/IP, WINS, DNS, DHCP);
iSCSI SANs implementation
Software Defined Networks

Desired Skills & Experience

Years of Relevant Experience: 8 years or more
Preferred Education: 4 year college degree or equivalent technical study.
Certification: Valid CISCO or any other

Experienced in:

Design of IP addressing scheme, subnetting, route summarization etc.
Creation of DMZs
Networks administration;
Day to day infrastructure Support;
System maintenance and upgrades;
Developing SOPs and other relevant Documentation;
Consolidation, availability (HA, FT) and resources Management in virtualized environments;
Extensive Networking knowledge and experience of all LAN and routing protocols (TCP/IP, WINS, DNS, DHCP);
iSCSI SANs implementation
Software Defined Networks

Company Description

The USAID Power Distribution Program is a five year, USAID-funded program aimed at working jointly with government-owned power distribution companies in Pakistan to improve their performance in terms of a reduction in losses, and improvement in both revenues and customer services, to bring them to the level of well-run utilities in other progressive countries. Through this program, the United States Government provides assistance and support to the Government of Pakistan in its efforts to reform the power sector to end the current energy shortfall. More information can be solicited from the Program’s website: http://pdip.pk.

JUNIPER CLI command

noreply@blogger.com (Anonymous) — Thu, 07 Mar 2013 07:19:00 +0000

Basic Juniper CLI command

TSHOOT 642-832 - MCQs

noreply@blogger.com (Anonymous) — Tue, 05 Mar 2013 05:24:00 +0000

Juniper SRX series

noreply@blogger.com (Anonymous) — Tue, 05 Mar 2013 05:06:00 +0000

SRX-110 : Only difference between SRX-100 and SRX-110 is Adsl/VDSL support that is not be included in SRX-100, a great Firewall with DSL technology.

Pass4sure Tshoot

noreply@blogger.com (Anonymous) — Mon, 04 Mar 2013 20:38:00 +0000

Pass4sure Tshoot Ticket 1:

ASA X-series firewalls

noreply@blogger.com (Anonymous) — Sat, 02 Mar 2013 05:20:00 +0000

Cisco ASA x series Devices, Its an dvance ASA firewall with Gigaport supports. In X-series you have Gigaports in all version. Hiher firewall throuhput and performance....!

Juniper SRX-100

noreply@blogger.com (Anonymous) — Fri, 01 Mar 2013 07:12:00 +0000

Great Firewall for Small bussiness environment..

Position Vacant - Assistant Manager – Networks & Systems

noreply@blogger.com (Anonymous) — Thu, 28 Feb 2013 05:11:00 +0000

Position Vacant

Assistant Manager – Networks & Systems

Position Title	Assistant Manager – Networks & Systems
Department	Information Technology
Reporting Relationship	Senior Strategist, IT

Scope of the Position
Assistant Manager – Network & Systems Administration is responsible for effective provisioning, installation/configuration, operation, and maintenance of systems hardware, software and related infrastructure. This individual participates in technical research and development to enable continuing innovation within the infrastructure. This individual ensures that system hardware, operating systems, software systems, and related procedures adhere to organizational values, enabling staff, faculty, and Partners. This individual will assist project teams with technical issues in the Initiation and Planning phases of our standard Project Management Methodology. These activities include the definition of needs, benefits, and technical strategy; research & development within the project life-cycle; technical analysis and design; and support of operations staff in executing, testing and rolling-out the solutions. This individual is accountable for the following systems: Linux and Windows systems that support IS infrastructure; Enterprise Applications Campus Management; Database Administration on SQL, MYSQL and Oracle on these systems include SA engineering including provisioning, operations, support, maintenance and research and development to ensure continual innovation.

Summary of Key Functions

Characteristics, Duties and Responsibilities:

Development:

Responsible to work with consultants and vendor for requirements gathering, design, configuration, technical specifications, integration, data migration, testing, documentation, training, pre & post implementation setups / configuration and support.
Install new / rebuild existing servers and configure hardware, peripherals, services, settings, directories, storage, etc. in accordance with standards and project/operational requirements.
Research and recommend innovative, and where possible automated approaches for system administration tasks. Identify approaches that leverage our resources and provide economies of scale.
Perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, systems and key processes, reviewing system and application logs, and verifying completion of scheduled jobs such as backups.
Perform regular security monitoring to identify any possible intrusions.
Provide Tier III/other support per request from various constituencies. Investigate and troubleshoot issues.
Repair and recover from hardware or software failures. Coordinate and communicate with impacted constituencies.
Apply OS patches and upgrades on a regular basis, and upgrade administrative tools and utilities. Configure / add new services as necessary. Maintain operational, configuration, or other procedures.
Perform periodic performance reporting to support capacity planning. Perform ongoing performance tuning, hardware upgrades, and resource optimization as required. Configure CPU, memory, and disk partitions as required. Maintain data center environmental and monitoring equipment.
Functions as a lead worker doing the work similar to those in the work unit; responsibility for training, instruction, setting the work pace, and possibly evaluating performance.
Establishing the needs of users and monitoring user access and security; monitoring performance and managing parameters to provide fast query responses to front-end users.
Mapping out the conceptual design for a planned database in outline; considering both back-end organization of data and front-end accessibility for end-users.
Refining the logical design so that it can be translated into a specific data model; further refining the physical design to meet system storage requirements.
Installing and testing new versions of the DBMS; maintaining data standards, including adherence to the Data Protection Act.
Writing systems documentation, including data standards, procedures and definitions for the data dictionary (metadata); controlling access permissions and privileges.
Developing, managing and testing back-up and recovery plans; ensuring that storage, archiving, back-up and recovery procedures are functioning correctly.
Capacity planning; working closely with IT project managers, database programmers and multimedia programmers.
Communicating regularly with technical, applications and operational staff to ensure database integrity and security.
Commissioning and installing new applications and customizing existing applications in order to make them fit for purpose.

RequiredQualification, Experience and Skills
The Assistant Manager – Networks & Systems will have:. Bachelor’s degree in Computer Science, Information Technology, Information Systems, Computer Engineering or equivalent combination of experience, education and training from a reputed university. Overall 03 years’ System Administration experience ideally at Higher Education institution, development / software house or at Systems Integrators SI’s and vendor business. Proven track record of managing / assisting on Networking projects, designing and configuring wired / wireless networks is must. Experience in designing and configuring telecommunication systems project is an advantage. Systems Administration/System Engineer certification in Linux and Microsoft. Systems Administration/System Engineer certification in Microsoft Exchange. Systems Administration/System Developer certification in Microsoft Lync Servers. Systems Administration experience in MS SharePoint and other open source systems. Application deployments of Open Source platforms, its customization and integrations. Good knowledge of ASP.NET, PHP, Java and open source platforms. Good knowledge of Web Applications deployment and integration. Excellent communication skills and the ability to work with stakeholders of differing levels. Attention to detail and a flexible approach to work. Excellent planning, coordination and prioritization skills and proven capacity to undertake varied tasks simultaneously within stringent deadlines. Experience of working at jobs requiring close attention to detail. Proven record of teamwork and project management in previous roles. Self-motivated and able to meet agreed objectives on own initiative.

Habib Universtiy

Habib University will be a pioneering institution providing a rich liberal arts education to the youth of Pakistan to create a generation of socially responsible and critically conscious individuals, who can bring Pakistan to the forefront not only economically and financially, but intellectually as well. The University is being established in Karachi, Pakistan. Habib University will initiate its classes in the year 2014 with 200 students, offering four undergraduate programs offered through the School of Arts, Humanities and Social Sciences and the School of Science and Engineering. The University will offer a rich, interdisciplinary learning fabric by bringing together the innovative spirit of Entrepreneurship with high quality Science, Engineering and Liberal Arts education. The University will be a modern learning space fully equipped with state-of-the-art research and teaching facilities in order to attract the best faculty from around the world. For more information please visit: http://habib.edu.pk/

About Habib Universtiy Foundation

Habib University Foundation (H.U.F.) is a not-for-profit organization, which commenced its work in 2007. H.U.F. responds to existing gaps in the educational scenario of Pakistan, by supporting educational initiatives, research and innovation. It is focused on improving the status of education within the country by supporting research, planning and implementation of innovative educational models. H.U.F. extends support at all tiers of education delivery within the country including higher education, vocational skill development, pre-tertiary education and research and advocacy. For more information on the foundation please visit: http://www.huf.org.pk

About House of Habib

The House of Habib (HoH) is a well-established industrial house in Pakistan. It is equally famous for its philanthropic contributions towards the development of Pakistani society. HoH has a rich tradition in commerce and finance that dates all the way back to 1841 when Esmail Ali of Jamnagar, India, set up a utensil factory in Bombay (present day Mumbai). Since then, his descendants have built on his hard work and today the House of Habib has business interests across varied industries. Today, the House of Habib’s portfolio boasts of some of the most successful and financially stable companies in Pakistan including Indus Motors, AuVitronics Limited, DYNEA Pakistan Limited, Shabbir Tiles and Ceramics Limited, Thal Limited, Habib Bank AG Zurich etc.We are an equal opportunity employer and appreciate diversity in our organization. We assure you that at the foundation, you will interact with people from various backgrounds, increasing your exposure to various skill sets and opportunities.

Offered Benefits

The foundation offers a comprehensive salary package that is designed to meet the needs of a diverse workforce. In addition to this, employees are also entitled to become members of the Foundation’s Provident Fund, Group Life Insurance and Hospitalization/Health Coverage schemes. We also support personal and professional development of our employees and offer excellent professional learning and development possibilities. .

Our Culture

The foundation firmly believes that trust and respect for the potential of people is the key to creating an inspiring and exciting work environment which promotes creativity and innovation, and a sense of self accountability and pro activeness. Our values guide the work we do and help us create a unique culture where each of our colleagues feel valued and empowered. .

APPLY AT:

http://www.huf.org.pk/employment/ADIT.htm?goback=.gde_4267483_member_217974687