Helping you to manage your pc

CHANGE THE DEFAULT LOCATION FOR INSTALLING APPS

2008-08-28T10:37:00.002-07:00

As the size of hardrives increase, more people are using partitions to seperate and store groups of files.

XP uses the C:\Program Files directory as the default base directory into which new programs are installed. However, you can change the default installation drive and/ or directory by using a Registry hack.

Run the Registry Editor (regedit)and go to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

Look for the value named ProgramFilesDir. by default,this value will be C:\Program Files. Edit the value to any valid drive or folder and XP will use that new location as the default installation directory for new programs.

google calc

2008-08-28T10:37:00.001-07:00

How to use the Google calculator:

goto google.com
type 3+2
click on search & see what happens

Google’s calculator tries to understand the problem you are attempting to solve without requiring you to use special syntax. However, it may be helpful to know the most direct way to pose a question to get the best results. Listed below are a few suggestions for the most common type of expressions (and a few more esoteric ones).

Most operators come between the two numbers they combine, such as the plus sign in the expression 1+1.

Operator Function Example
+ addition 3+44
- subtraction 13-5
* multiplication 7*8
/ division 12/3
^ exponentiation (raise to a power of) 8^2
% modulo (finds the remainder after division) 8%7
choose X choose Y determines the number of ways of choosing a set of Y elements from a set of X elements 18 choose 4
th root of calculates the nth root of a number 5th root of 32
% of X % of Y computes X percent of Y 20% of 150

Some operators work on only one number and should come before that number. In these cases, it often helps to put the number in parentheses.

Operator Function Example
sqrt square root sqrt(9)
sin, cos, etc. trigonometric functions (numbers are assumed to be radians) sin(pi/3)
tan(45 degrees)
ln logarithm base e ln(17)
log logarithm base 10 log(1,000)

A few operators come after the number.

Operator Function Example
! factorial 5!

Other good things to know

You can force the calculator to try and evaluate an expression by putting an equals sign (=) after it. This only works if the expression is mathematically resolvable. For example, 1-800-555-1234= will return a result, but 1/0= will not.

Parentheses can be used to enclose the parts of your expression that you want evaluated first. For example, (1+2)*3 causes the addition to happen before the multiplication.

The in operator is used to specify what units you want used to express the answer. Put the word in followed by the name of a unit at the end of your expression. This works well for unit conversions such as: 5 kilometers in miles.

You can use hexadecimal, octal and binary numbers. Prefix hexadecimal numbers with 0x, octal numbers with 0o and binary numbers with 0b. For example: 0x7f + 0b10010101.

The calculator understands many different units, as well as many physical and mathematical constants. These can be used in your expression. Many of these constants and units have both long and short names. You can use either name in most cases. For example, km and kilometer both work, as do c and the speed of light.

Feel free to experiment with the calculator as not all of its capabilities are listed here. To get you started, we’ve included a few expressions linked to their results.

1 a.u./c
56*78
1.21 GW / 88 mph
e^(i pi)+1
100 miles in kilometers
sine(30 degrees)
G*(6e24 kg)/(4000 miles)^2
0x7d3 in roman numerals
0b1100101*0b1001

TAKE AN IMAGE OF UR SEREEN

2008-08-28T10:36:00.001-07:00

1. PRESS "Print Screen" (key on your key board)
if you press that key, it will capture the contents on the screen as image.

2.NOW Open Paint or MS-WORD

3. Paste or Ctrl+V.

4. Save the file.

Enjoy...

ITS REALLY A MAGIC TRY IT

2008-08-28T10:35:00.001-07:00

For those using Windows, do the following:

1.) Open a new notepad file

2.) Type "Bush hid the facts" (without the quotes)

3.) Save it as whatever you want.

4.) Close it, and re-open it.

SEE THE MAGIC........

HIDE UR FOLDERS IN JUST FEW STEPS WITHOUT USING SOFTWARES

2008-08-28T10:34:00.000-07:00

(THIS IS REALLY WONDERFUL TRICK ..................)
hide ur folders without the usage of folder lock :

suppose u want to hide a folder named abc which is in D: of ur computer

go to command prompt
start--->run--->cmd-->d:

after changing it from C: to D:

type D:/>attrib +h +s abc
the above command is to hide the folder

to show the folder

tyoe D:/>attrib -h -s abc

in this type of hidding the folder cannot be viewed even if we make advance search or even changing the folders menu to (show all hidden files)

(YA FRIENDS ITS REALLY COOL U CAN EASILY HIDE UR FOLDERS)

have fun dont forget to leave ur comments...........................

symbols for notepad

2008-08-28T10:33:00.002-07:00

Alt+15= ¤ Alt+79= O Alt+129= ü Alt+179= ¦ Alt+229= Õ Alt+20= ¶ Alt+80= P Alt+130= é Alt+180= ¦ Alt+230= µ Alt+21= § Alt+81= Q Alt+131= â Alt+181= Á Alt+231= þ Alt+32=espaço Alt+82= R Alt+132= ä Alt+182= Â Alt+232= Þ Alt+33= ! Alt+83= S Alt+133= à Alt+183= À Alt+233= Ú Alt+34=" Alt+84= T Alt+134= å Alt+184= © Alt+234= Û Alt+35= # Alt+85= U Alt+135= ç Alt+185= ¦ Alt+235= Ù Alt+36= $ Alt+86= V Alt+136= ê Alt+186= ¦ Alt+236= ý Alt+37= % Alt+87= W Alt+137= ë Alt+187= + Alt+237= Ý Alt+38= & Alt+88= X Alt+138= è Alt+188= + Alt+238= ¯ Alt+39= ' Alt+89= Y Alt+139= ï Alt+189= ¢ Alt+239= ´ Alt+40= ( Alt+90= Z Alt+140= î Alt+190= ¥ Alt+240= Alt+41= ) Alt+91= [ Alt+141= ì Alt+191= + Alt+241= ± Alt+42= * Alt+92= Alt+142= Ä Alt+192= + Alt+242= _ Alt+43= + Alt+93= ] Alt+143= Å Alt+193= - Alt+243= ¾ Alt+44= , Alt+94= ^ Alt+144= É Alt+194= - Alt+244= ¶ Alt+45= - Alt+95= _ Alt+145= æ Alt+195= + Alt+245= § Alt+46= . Alt+96= ` Alt+146= Æ Alt+196= - Alt+246= ÷ Alt+47= / Alt+97= a Alt+147= ô Alt+197= + Alt+247= ¸ Alt+48= 0 Alt+98= b Alt+148= ö Alt+198= ã Alt+248= ° Alt+49= 1 Alt+99= c Alt+149= ò Alt+199= Ã Alt+249= ¨ Alt+50= 2 Alt+100= d Alt+150= û Alt+200= + Alt+250= · Alt+51= 3 Alt+101= e Alt+151= ù Alt+201= + Alt+251= ¹ Alt+52= 4 Alt+102= f Alt+152= ÿ Alt+202= - Alt+252= ³ Alt+53= 5 Alt+103= g Alt+153= Ö Alt+203= - Alt+253= ² Alt+54= 6 Alt+104= h Alt+154= Ü Alt+204= ¦ Alt+254= _ Alt+55= 7 Alt+105= i Alt+155= ø Alt+205= - Alt+56= 8 Alt+106= j Alt+156= £ Alt+206= + Alt+57= 9 Alt+107= k Alt+157= Ø Alt+207= ¤ Alt+58= : Alt+108= l Alt+158= × Alt+208= ð Alt+59= ; Alt+109= m Alt+159= ƒ Alt+209= Ð Alt+60= < 110=" n" 160=" á" 210=" +" 61=" =" 111=" o" 161=" í" 211=" Ë" 62=" "> Alt+112= p Alt+162= ó Alt+212= È Alt+63= ? Alt+113= q Alt+163= ú Alt+213= i Alt+64= @ Alt+114= r Alt+164= ñ Alt+214= Í Alt+65= A Alt+115= s Alt+165= Ñ Alt+215= Î Alt+66= B Alt+116= t Alt+166= ª Alt+216= Ï Alt+67= C Alt+117= u Alt+167= º
♀& #9792 widout spaces♂& #9794 widout spaces◘& #9688 widout spaces•& #8266 widout spaces♠& #9824 widout spaces♣& #9827 widout spaces Δ & #916 widout spacesΘ & #920 widout spacesΞ & #926 widout spacesΠ & #928 widout spacesΣ & #931 widout spacesΦ& #934 widout spacesΨ& #936 widout spacesΩ& #937 widout spacesα& #945 widout spacesβ& #946 widout spacesγ& #947 widout spacesδ& #948 widout spacesε& #949 widout spacesζ& #950 widout spacesη& #951 widout spacesθ& #952 widout spacesι& #953 widout spacesκ& #954 widout spacesλ& #955 widout spacesμ& #956 widout spacesξ& #958 widout spacesς
& #962 widout spacesσ & #963 widout spacesτ & #964 widout spacesψ
& #968 widout spacesω & #969 widout spacesθ & #977 widout spaces & #9829 ♥
alt+987=█ alt+6=♠

Creating 3D Window Effect.

2008-08-28T10:33:00.001-07:00

You can create a nice 3D effect for your windows
Start Regedit
Go to HKEY_CURRENT_USER \ Control Panel \ Colors
Make sure the following setting are there:
ButtonHilight=128 128 128ButtonShadow=255 255 255

This really works. Try it out!!

prevent users from writing to USB drives.

2008-08-28T10:32:00.002-07:00

The following registry setting will prevent writing to usb in windows xp.
Expand HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l Add a new key and name it "StorageDevicePolicies".
In the window on the right then create a new DWORD value and label it WriteProtect, give it a value of "1" and users can no longer write to USB drives.
Giving a value of "0" will allow to write again.
Enjoy frnds!!

FIREWALL

2008-08-28T10:32:00.001-07:00

Check Personal Firewall Status Tip:

In the previous tip, I mention how to turn on Windows XP's Personal Firewall feature. But once you turn it on, your connection looks just the same as it did before. How can you check the status of the connection and the firewall? Simply open Control Panel from the Start Menu, open Internet and Network Connections, then Network Connections. By default the view is of large icons.
Click the View Menu, and choose "details" in order to reveal several more columns of information about the connections that your computer has. Check the Status column to see if your connection is currently connected, and whether or not it is "firewalled." You can even drag the column headings around (I like to slide the Status column right next to the Name column. You can even remove entire columns by right-clicking the column heading and unchecking it.

Create A Hidden User Account

2008-08-28T10:31:00.002-07:00

This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000.

#[Start] [Run] [Regedit]
#Registry Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\
Winlogon\SpecialAccounts\UserList
#Modify/Create the Value Data Type(s) and Value Name(s) as detailed below.
#Data Type: REG_DWORD [Dword Value] // Value Name: Type Name of Account to be Hidden
#Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]
#Exit Registry and Reboot...

While the account is hidden on the Welcome screen, note that the account profile will be visible in C:\Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups

disk clean up........

2008-08-28T10:31:00.001-07:00

Disk Cleanup
This program used for cleaning harddisk to offer space
Click : startThen : runtype : cleanmgr

Making Win Xp 60% Faster..

2008-08-28T10:30:00.000-07:00

Whenever you start your computer, you are faced with a few moments of thumb twiddling while Windows XP boots and prompts you to log on. Although you should expect to wait for a few moments, sometimes Windows XP seems to boot rather slowly. In fact, you may notice that over a period of time the PC that used to roar to life seems a bit sluggish instead. Fortunately, you can perform several techniques that help Windows XP get the bootup speed you want. This chapter explores how to put these techniques to work.

Some of the things may already have been discussed in some threads earlier

Stopping Unneeded Startup Services

Along with the core operating system and programs that Windows XP runs when it starts, there is also a host of services involved. Many of these services are necessary for Windows XP to operate correctly. However, many of them are for features in Windows XP that you may not use at all. You can peruse the services and disable any service that you do not want to run. The fewer services that run, the more quickly Windows XP will boot.

Caution: Exercise caution when stopping services. If you do not know what a service does or are unsure of the ramifications of stopping the service, leave it alone. Some services are critical to Windows XP's operations, so make sure you understand what the service is before you disable it.

To reduce the number of services that start on bootup, you can access two different areas of Windows XP. The first is the System Configuration Utility. The Services tab shows you the services that start when the computer boots.

You can stop a service from starting by simply clearing the check box next to the service and clicking OK. However, before you do so, there is another way to disable services that you may prefer because the interface gives you more information about the service in question.

Open Control Panel/Administrative ToolsServices or else select Start/Run, type services.msc, and click OK. Either way, you see the Services console.

I prefer to use the Services console instead of the System Configuration Utility because it describes what the service does. Additionally, you can double-click a service and examine its properties.

Notice the Startup Type column in Figure 4-2. This information lists whether the service is automatic or manual. Manual services are only started in Windows XP when you start a process that requires the service. Some other process may require the service that has a "dependency" relationship with it; in this case, the dependency service will start, as well. Because these services do not start automatically when you boot Windows XP, you do not need to do anything with manual services.

However, all services listed as automatic start when Windows XP boots. These are the services that increase boot time. As I have mentioned, many of them are necessary and important, so you should not stop automatic services from booting unless you are sure of the ramifications. You can get this information by looking at the Description column. Here's a quick look at common services you may want to live without:

Automatic Updates: This service enables Windows XP to check the Web automatically for updates. If you don't want to use
Automatic Updates, you can disable the service. You can always check for updates manually at the Windows Update Web site.

Computer Browser: If your computer is not on a network, you don't need this service. If you are on a network, leave it alone.

DHCP Client: If you are not on a network, you do not need this service. If you are on a small workgroup, you can still increase boot time by configuring manual IP addresses (which I explore later in this chapter).

DNS Client: If you are not on a network, you do not need this service. If you are, leave it alone.

Error Reporting and Event Log: You don't have to use these services but they can be very helpful, so I would leave them configured as automatic.

Fax: If you don't use your computer for fax services, you can disable this one. Help and Support: If you never use the Windows XP

Help and Support Center (found on the Start menu), you can disable this service.

IMAPI CD-Burning COM: This service enables you to burn CDs on your computer. If you never burn CDs, you can disable the service.

Indexing Service: Your computer keeps an index of files but if you rarely search for files, the service is just a resource hog. You can stop it and turn the service to manual.

Windows Firewall/Internet Connection Sharing: If you do not use these features, you can disable them.

Infrared Monitor: If you do not use infrared devices, you can disable this service.

Messenger: This service sends alert messages on a local area network (it is not the same as Windows Messenger). If you are not on a network, you can disable this service.

Print Spooler: If you do not do any printing from the computer, you can disable this service. If you print, make sure you leave it as automatic.

Remote Registry: This service allows remote users to modify the Registry on your computer. If you are not on a network, you can disable this service.

System Restore Service: This service allows you to use System Restore. If you have turned off System Restore anyway, you do not need to turn off the service. If you do, you turn off System Restore.

Themes: If you do not use themes, you can disable this service.

Windows Image Acquisition: If you do not use scanners or digital cameras, you can disable this service.

Wireless Zero Configuration: If do not use wireless networking devices, you can disable this service.

You may have a number of other automatic services, depending on software and other configurations on your computer. So it's a good idea to look through the services and learn more about them. If you double-click a service, a Properties dialog box appears

Notice that on the General tab, you see a Startup Type drop-down menu. If you want to change an automatic service to manual, select Manual here and click OK. As a general rule, don't disable a service unless you are sure you will never use it.

However, manual configuration allows the service to be started when you find it necessary, thus speeding up your boot time. However, before you change a service to manual, look at the Dependencies tab (see Figure 4-4). This tab shows you which other services depend upon the service you are considering changing.

Keep in mind that services are necessary for the vast functionality you get with Windows XP. Change only those services that you understand and do not use. How you use your Windows XP computer should be the best guide in terms of optional startup services.

Tip:

The Indexing service and the System Restore service take up a lot of disk space and system resources across the board.
You can live without the Indexing service but I suggest that you keep using System Restore. It works great when you are in a bind and this is one case where the loss of speed may not be worth the ramifications of not using System Restore. Speed Tips and Tricks for Windows XP Startup Aside from startup programs, services, and the Prefetch folder, there are a number of other startup procedures and issues you can modify to help Windows XP start faster. The following sections explore those tips and tricks. Manual IP Addressing on Small Office/Home Networks Windows XP is configured to help you take care of networking. It uses the TCP/IP protocol for networking in workgroups, or what you might call small office or home networks that do not use a dedicated server. The problem is that automatic IP addressing can be slow. When your computer boots, it has to query the network to see what IP addresses are already in use and then assign itself one. If you want to speed up the boot time a bit, consider manually assigning IP addresses to all computers on the network. This way, the network computers do not have to worry about locating an automatic IP address. Because one is manually configured, the operating system doesn't have to spend time solving this problem. This isn't a networking book, however, so I won't delve into the implications of using a manual IP address, but if you are using a computer that functions as a host computer to the Internet (using Internet Connection Sharing [ICS]), you can get into connectivity problems if you change the configuration of the IP address. However, you can still work around this problem by starting with the ICS host computer. Select Start/Connect To/Show All Connections. Right-click your network adapter card and click Properties. On the General tab, select TCP/IP in the list of services and click the Properties button. In the TCP/IP properties, you can see if you use an automatic or manual IP address. In the example in Figure 4-5, I have configured a manual IP address of 90.0.0.1 and a default subnet mask. The other computers on my office network each use a different IP address in the same class, such as 90.0.0.2, 90.0.0.3, 90.0.0.4, and so on. This way, each computer has a permanent IP address, which helps increase boot time. Note that if you change the IP addresses of your computers, they must all use the same subnet mask. A default subject mask of 255.255.255.0 will keep you in good shape. Make sure you understand the implications of changing IP addresses on your network. If you have no networking experience at all, you may be wiser to leave the automatic IP addressing as is and try to gain some speed using the additional suggestions in this chapter. Disabling Recent Documents History Windows XP includes a feature that keeps track of all recent documents you have opened or used. The idea is that you can select Start/Recent Documents History and quickly reopen any document you have recently used. I use many documents each day and never use the feature myself. In my opinion, I can keep up with what I want to use without Windows XP doing it for me. The bad thing about Recent Documents History is that Windows XP has to calculate what should be put there each time you boot Windows, which can slow things down. So, if you never use the Recent Documents History, it's a good idea to disable it.

Here's how:
1. Open the Registry Editor (select Start/Run, type regedit, and click OK).
2. Navigate to HKEY_CURRENT_USER\Software\Mcft\Windows\ CurrentVersion\Policies\Explorer.
3. Create a NoRecentDocsHistory D_WORD key. Double-click the value to open it once it is created.
4. Set the Data Value to 1 to enable the restriction.
5. Click OK and close the Registry Editor. You'll need to restart the computer for the change to take effect. Disabling the Boot Logo You can remove the boot logo that appears when you start Windows XP. This little tweak probably shaves only a few seconds off your boot time but seconds count if you are serious about trying to get Windows XP up and running as quickly as possible. The only negative is that if you remove the boot logo, you will also not see any boot messages, such as check disk. (But if you are not having problems with your computer, this isn't such a big deal.)
To remove the boot logo, follow these steps:
1. Select Start/Run, type msconfig, and click OK.
2. In the System Configuration Utility, click the BOOT.INI tab.
3. On the BOOT.INI tab, click the NOGUIBOOT check box option. Click OK. Removing Unwanted Fonts One trick that increases your boot time a bit is to lose any fonts in the Fonts folder in Control Panel that you never use. The more fonts you have, the more processing Windows XP has to do to prep all of those fonts for use. You must be a bit careful here to not remove fonts that you might want, but there is a good chance that you can live without many of them. For instance, you may have foreign language fonts and other symbol fonts (such as Wingdings) that you never use. To delete unneeded fonts, follow these steps:
1. Open the Fonts folder in Control Panel.
2. Select Edit/Select All and then Edit/Copy.
3. Create a new folder on your desktop, open it, and select Edit/Paste.
4. In this new folder, delete any of the fonts you do not want.
5. Return to the Fonts folder in Control Panel. Right-click the selected fonts and click Delete.
6. Go back to your new desktop folder and click Edit/Select All.
7. Return to your Fonts folder and click Edit/Paste. You now have only the desired fonts in the Fonts folder. Tip: You can directly delete fonts from the Fonts folder without creating the secondary folder. However, I recommend the preceding steps to help ensure that you do not make a mistake in the deletion process. Stopping Remote Assistance and Remote Desktop Sharing In Windows XP Professional, you have two remote networking features called Remote Assistance and Remote Desktop Sharing. These remote networking features are very helpful in a variety of situations but if you don't use them, it is good idea to disable them to save boot time. You can always enable them later if you want to use them. Note: If you are interested in using Remote Desktop or Remote Assistance, see my book Windows XP for Power Users: Power Pack published by John Wiley & Sons.
1. Open the Start menu, right-click My Computer, and choose Properties.
2. Click the Remote Tab.
3. Clear both check boxes to disable Remote Assistance and Remote Desktop. Speeding Up the Dual-Boot Timeout If you dual-boot your computer with Windows XP and another operating system, you see an operating system selection menu on startup. If you typically boot into Windows XP and not the other operating system, you can speed up the dual-boot timeout value so that you do not wait so long for the boot process to select your default operating system and continue with the boot process. The default timeout value is 30 seconds but you can change this setting to 10. This gives you enough time to select the alternate operating system if you want but also speeds up the boot process. You can skip this section if you do not use a dual-boot configuration.
Follow these steps:
1. Locate the boot.ini file on your computer. It is a hidden file by default; mine is located in C:\boot.ini.
2. Open the file with Notepad (which is what opens it by default).
3. Change the Timeout value to 10 (see Figure 4-11).
4. Select File/Save and close Notepad. Speeding Up Your PPPoE Connection If you use a Point-to-Point Protocol connection over Ethernet (PPPoE), you may notice a delay in using the PPPoE connection after startup. By default, there is a 120 second delay but you can stop this behavior by manually configuring an IP address for the network adapter card. If you do not use a PPPoE connection, you can skip this section.
1. Select Start/Connect to/Show All Connections.
2. Open the TCP/IP properties for your LAN network interface card.
3. Manually set the IP address on the TCP/IP properties to an appropriate IP address and subnet mask for your network. Reducing the Wait Time When you start to shut down Windows XP, it has to quit, or "kill," any live applications or processes that are currently running. So close all applications first. However, some applications and processes are always running in the background. You can reduce the amount of time that Windows XP waits for those applications and processes to close before Windows XP kills them. Edit three different Registry settings to change this:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop. Select WaitToKillAppTimeout and set the value to 1000.
3. Select the HungAppTimeout value and set it to 1000 as well. 4
. Navigate to HKEY_USERS\.DEFAULT\Control Panel\Desktop. Set the WaitToKillAppTimeout and set the value to 1000. Select the HungAppTimeout \newline value and set it to 1000 as well.
5. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l. Select the WaitToKillServiceTimeout value and set it to 1000.
6. Close the Registry Editor. Automatically Killing Tasks on Shutdown You know the drill. You start to shut down the computer, you wait a few moments, and then you see a dialog box asking if you want to kill an application or service that is running. Instead of prompting you, you can make Windows XP take care of the kill task automatically. Here's how:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop.
3. Highlight the value AutoEndTasks and change the value to 1.
4. Close the Registry Editor.

Crack into admin account from limited account(99.99% works)

2008-08-28T10:29:00.002-07:00

Go to cmd

type AT (time) /interactive “cmd.exe”

enter time in 24hr format

means if you want to enter 5.00pm then enter 17:00

then a new window of cmd will open at specified time

In new window type net(space)user

press enter

after this u will see some names on ur screen

notedown the name of admin acc

then type

net user (name of admin acc u want to crack into) *
e.g if the name of admin acc is raj then type

net user raj*

then it will ask u for new password

enter password of ur choice

and u got the admin password

OPEN MY COMPUTER USING KEYBOARD (REALLY COOL TRICK)

2008-08-28T10:29:00.001-07:00

we can open MY COMPUTER by making double click on my computer icon on ur screen (u need to use ur mouse ) but if u want to open by using keyboard
then there are two easy ways..................

1---> Windows Key + E and it’ll open the windows explorer for you.
2---> The second one I personally like it just hitting Windows key + R (it’ll open the run prompt) and typing three or more dots (…) and press enter.

My Computer is open.

ISNT IT COOL ................LEAVE UR COMMENTS.....

background movieeeeeee

2008-08-28T10:28:00.002-07:00

This tweak will launch WindowsMediaPlayer with the 'AboveNormal' priority setting when opening a mediafile. Having trouble watching a movie when you also have a lot of background processes going on? Here's what to do: 1. Create a new textfile in the root of c:\, but instead of giving it the .txt extension you name it wmp_AboveNormal.bat 2. Right-click this file and choose 'Edit', you'll see it'll open notepad. Put this line in: start /AboveNormal C:\"Program Files"\"Windows Media Player"\wmplayer.exe %1 %* 3. Save (make sure you save it as .bat, not as .txt) and close. Now all you have to do is register your mediafiles to this batchfile. Here's how to do that: 4. In Windows Explorer choose Tools>Folder Options >File Types 5. Scroll down(press A) to the AVI filetype 6. Click 'Change' and point to c:\wmp_AboveNormal.bat . Click OK and Close. Now everytime you dubbleclick an .avi WMP will open with the 'AboveNormal' -priority setting ! (Repeat steps 4-6 to register all mediatypes you want to be opened this way.)

XP Animations.

2008-08-28T10:28:00.001-07:00

You can turn off window animation ("exploding" windows), displayed when you play around with minimizing/maximizing open windows. This makes navigating Windows 95/98/ME/NT4/2000/XP a lot quicker, especially if you don't have a fast video controller, or if you got tired of seeing it all the time (like I did). smile.gif To do this,
run Regedit (or Regedt32) and go to: HKEY_CURRENT_USER Control Panel Desktop WindowMetrics or if you are the only user of your Windows computer
go to: HKEY_USERS .Default Control Panel Desktop WindowMetrics Right-click on an empty spot in the right hand pane.
Select New -> String [REG_SZ] Value. Name it MinAnimate. Click OK. Double-click on "MinAnimate" and type 0 to turn OFF window animation or 1 to turn it ON. Click OK. Close the Registry Editor and restart Windows. Done.

Customize Explorer Toolbar Tip

2008-08-28T10:27:00.002-07:00

In Windows Explorer, you can customize the toolbar to make Explorer even more handy. The Toolbar is the bar of icons directly underneath the menu bar. It contains icons for going back, up one level, displaying folders or search, etc. You can right-click an open area of this Toolbar and choose Customize to change the order of these icons, and even to add new icons to it. For instance, I like to add the Map Drive and Disconnect buttons. In Windows XP, you may have to unlock the Taskbar before you can make changes in Windows Explorer.
Lock the Taskba - If you find that your Windows XP Taskbar keeps being changed, or moved to one side or the top of your screen, and you didn't mean to have it do that, this tip is for you. Once you have your Task Bar arranged the way you like it, in the right location on the screen, and with all the right toolbars and icons, you can lock it, so that it won't get changed accidentally. To lock the Taskbar, simply right click it and choose Properties. In the window that appears, check the box (click) next to "Lock the Taskbar." Now you won't accidentally bump the mouse and have your Task bar end up on another side of the screen.

View Admin At welcome Screen

2008-08-28T10:27:00.001-07:00

By default windows XP doesn't show the Administrator in the user list at the welcome screen. Here's a way to get around it.

Now head up to HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Winlogon\SpecialAccounts\Userlist

create a new DWORD entry and name it as Administrator and change its value to 1.

exit and reboot for the changes to take effect.
To change it back change its value to 0 or simply delete the key.

Increase the life of ur dvd rom

2008-08-28T10:26:00.002-07:00

This is an interesting one!!!

This is for those who watch movies on their computer's dvd rom drive!!!
There is a software called dvd idle pro which can really increase the life of your dvd drive. By using the Smart Read-ahead Cache,
DVDIdle saves DVD data which will be played soon onto the hard disk cache or RAM cache, and
then feeds it to DVD player.
This allows the DVD drive to rest.

For example:
a 6X-speed DVD drive will only work for 15 minutes when you are watching a 90 minutes DVD
movie.
here is the link: http://www.dvdidle.com/download/DVDIdlePro59.exe

Now you can open them fast!!!

2008-08-28T10:26:00.001-07:00

Some shortcuts for Windows XP users!!
Press
'Windows key' + R and type the following (without qoutes) :

"winword" to open Word.
"powerpnt" to open Powerpoint.
"excel" to open Excel "mspaint" to open Paint.
"notepad" to open Notepad.
"wmplayer" to open Windows Media Player.
"wordpad" to open Wordpad.
"sndrec32" to open Sound Recorder.
"iexplore" to open Internet Explorer.
"firefox" to open Firefox.
"msconfig" to control startup.
"services.msc" to manage the Services.

shout cuts

2008-08-28T10:25:00.000-07:00

These Symbols can be used in MS Word, Excel,etc.

For © : Alt+0169
For ® : Alt+0174
For ™ : Alt+0153
For › : Alt+0155
For † : Alt+0134
For ø : Alt+0248
For ¤ : Alt+0164
For « : Alt+0171
For ° : Alt+0176
For ± : Alt+0177
For ² : Alt+0178
For ³ : Alt+0179
For µ : Alt+0181
For ¶ : Alt+0182
For ¹ : Alt+0185
For » : Alt+0187
For ¼ : Alt+0188
For ½ : Alt+0189
For ¾ : Alt+0190
For Å : Alt+0197
For × : Alt+0215
For Ø : Alt+0216
For Þ : Alt+0222
For ß : Alt+0223
For ☺: Alt+1

Creating 3D Window Effect

2008-08-28T10:24:00.000-07:00

HOW TO GET FOLDER OPTIONS BACK

2008-08-28T10:17:00.001-07:00

1: Here's how you can get Folder Options back..

1: Open Start menu and from there select Run

2: type gpedit.msc and hit enter

3: now in the Group Policy window, from the left pane, select user configuration->Administrative Tempelates->windows components->Windows Explorer by highlighting it with the mouse cursor..

4: now in the right side you will see an option which says "Removes the Folder Options menu item from the Tools menu"

5: right click on this option and select properties

6: now in the properties under Setting tab, select Disabled and hit OK

Use of PrintScreen for some fun.

2008-08-28T10:14:00.001-07:00

You know the use of Print screen button on the keyboard [present on top right above insert] .
It captures the screen , right ?
But now I will tell you how to use it for some fun .
Take screen shot of the desktop by pressing Print Screen on the desktop .
Go to Paint and paste this .
Save it .
For Windows XP users

1) On the desktop right click -----> arrange icons by ----> De-select 'Show Desktop Icons '.
2) Now right click the taskbar and select properties .
3) Check auto hide the taskbar. Click OK.
4) Now change your wallpaper and keep the one you saved earlier.
5) If paint is not closed, select File ---------> 'Set as background (Centered) '.
Now on the desktop even if you click any icon nothing will happen !!!
Now do I need to tell youhow you can use it for fun on someone else's PC ?
To revert back to normalcy change the wallpaper and select 'show desktop icons' on the right click menu .

You can put shortcuts for shortcuts!!

2008-08-28T10:13:00.000-07:00

You can put Keyboard shortcuts for desktop shortcuts.
To do this follow these steps :

1) Right click on the shortcut.
2) Go to properties.
3) Click once on the "Shortcut Key" bar.
4) Press any alphabet that you want to use as Shortcut Key.
5) Press OK Now to open that shortcut,
Press CTRL+ALT+"the alphabet".