To make this cute little Easter Egg Card you will need an 8-1/2" x 11" sheet of paper.

Step 1: Score the paper along the 11" side at 1-13/16", 3-5/8", 7-1/4" and at 10-1/16".  Mark the Paper at 10 - 7/8"

Step 2: Cut the paper at 10-7/8" along the 11" length  and then in half, along the 8-1/2" width.

 

 Step 3: Fold Along the score marks as indicated below.

Step 4: Print out egg template, paper clip it to the folded closed card and trim off edges.

Your Egg is ready for decorating!

I can't wait to see how you decorate your eggs!

Hope you enjoyed this easy little egg!  Don't forget to share yours with me, I'd LOVE to see it.  You can email me your creations at marie@stampthings.com or add a link to the comment section below!

In the past I have used the Pennant die to create anything BUT a pennant including:

• Pennant Card Tutorial
• Trees & Table Settings

This post contains actual pennants that were made with the Stampin' Up! Exclusive Pennant die for use with the Sizzix Big Shot, BigKick & the new Big Shot Pro machines.

To create these pennants you will need the following tools.

1. PN 113483 - Stampin' Up! Pennant Die
2. PN 113439 Big Shot Die Cutting Machine (Or the BigKick or Big Shot Pro)
3. PN 113478 - Extended Cutting Pads
4. Alphabet Dies of your Choosing to create letters.  These letters were created using the Plantin SchoolBook cartridge and the Cricut Expressions.

For each Pennant you will need:

• Two piece of 8 - 1/2 " x  9" for the creation of the Pennant in the color or pattern of your choosing.
• Additional piece of paper for creating the letters.

TIP: The tip regarding the pennant die is to use old remnants from stamp dies to create alignment edges along the side and bottom of the pennant die edges as shown below.

These alignment edges allow for consistent and accurate die cuts.  Be careful placing the remnant die pieces.  Don't worry they are easy to remove if you need to remove them or move them.

 Instructions

1. To create the pennant, fold the 8 - 1/2 " x  9" (or larger) piece of paper or card stock in half to yield a 4-1/4" x 9" (or larger) folded paper.
2. Place 1 to 2 pieces of folded paper on top of one another, make sure that the folded edge is aligned against the long edge of the pennant using the alignment edges described in the above tip.  I've found it best to cut 2 at a time.  You may be able to do more. 
3. To create the top layer of the pennant, trim the pennant along the perforated lines.  If you don't want the perforated edges on your finished pennant, trim the edges just a smidge on the inside of the perforations.
4. Unfold the die cuts and glue them together as desired.
5. Place large eyelets in the upper corners of the pennant.
6. Create and attach letters to each pennant as desired.
7. String pennants together with ribbon or desired string to complete pennant. 
    

Monkeys are well loved in our house, and not just because I've nicknamed my littlest one "Monkey".  We love them all from Curious George to Jack (Pirates of the Caribbean).  There was no question that when these monkeys appeared in the Decor Elements 2010 Catalog that they would adorn at least one wall in my house!

What I did not expect when I was putting these cute little monkeys on my bathroom wall was the help from my biggest monkey!

He did a great job!

  
Here is the completed walls!  They are so stinkin' cute (but very difficult to photograph). 

If you would like to check out some more Decor Elements from Stampin' Up! including the new chalk board elements click on the link below.

 Decor Elements 2010 Catalog

Don't forget to come back on Monday for some Sizzix fun with my favorite die!

Until then Happy Creating!

When I mentioned that I needed a little notebook to keep track various medical information and tasks for my daughter, my daughter's night nurse suggested that I make one. " Why not?"  I thought. " It can't be that difficult and I do have a Bind-It All" (Machine made by Zutter to bind things together) that I've never used before. "Shhh....Don't tell my husband". ;)

 
Although, I use this notebook for keeping track of medical information; it is also the perfect for journaling about Baby's first year or as a Pregnancy Journal.  I also made one for her nurse to keep track of books and movies that she read or seen.  It would also make a great gift for a new mom! 

The tools and supplies that I used to create this adorable little notebook include

 

How to Decorate Chipboard.

1. Cut Chipboard to desired size of Journal.  Do not punch holes for the spiral binding in it as shown in the picture above with the supplies.  It is best to punch these holes last.  Using the Bind-It-All will be shown in Part II.  For this project, the 9-3/8" x 9-3/8" Chipboard was cut in half to yield two - 4-11/16" x 9 3/8" piece of chipboard.  Don't worry about the funk measurements.  Here is a tip for cutting ANY rectangle in half.
   
   
   You only need to score one side of the chipboard.  It will break apart as you bend it back and forth.  In step 3 we will sand the sides smooth, so don't worry about the ragged edges. 
2. When applying paper to chipboard, it is best to allow for some overlap.  Cut the paper larger than the chipboard.  Apply an even coating of Tombow Multi Purpose Adhesive using the Broad tip adaptor.  Center the paper over the chipboard and rub the paper to help it appear and work out any bubbles.
   
3. Using a craft knife or scissors, trim the excess paper from around the chipboard one side at a time. 
   
4. Use a sanding block to light sand away those ragged edges.
    
5. Complete decorating the front cover and back cover as desired.

Wednesday's post will detail how to assemble the journal using the Zutter, Bind-It-All.  Don't own a Bind-It-All, but want to make your own little journal, come to my March 6th, Saving StampThings Stampin' Up! Party where you can make one of your own.  E-mail me at marie@stampthings.com for more information.

Link to Part II: Binding the Journal