http://www.zircontools4u.co.uk zircontools4u.co.uk - Products Mon, 24 Feb 2014 22:15:36 +0000 Zircon Zircon Multiscanner stud finder en Finds the centre and edges of wood or metal studs or joists up to 38mm deep. Locates metal pipes or rebar up to 76mm deep and live electrical wires up to 51mm deep. ACT Auto Correcting Technology corrects common user errors automatically. Ultra-bright LCD screen.Features:Finds Stud EdgesFinds Stud Centre with CenterVision TechnologyFinds Studs up to 19mm Finds Studs up to 38mmWireWarning DetectionScans for MetalScans for ElectricalACT Auto Correcting TechnologyLCD Display ScreenSpotlite Pointing SystemFinds Studs in Lath and Plaster http://www.zircontools4u.co.uk/zircontools_zir62116-zir62116-zircon-multiscanner-i500-one-step_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON MultiScannerMon, 24 Feb 2014 22:15:36 +0000 MultiScanner reg Pro SL quickly and easily locates studs metal and hot electrical wiring behind walls floors and ceilings. A 4-mode switch makes it easy to change functions while the easy-to-read display screen SpotLite reg Pointing System and audio tone all indicate the location of the target.* Stud Scan mode finds wood or metal studs and joists up to 3/4 inch (19 mm) deep* DeepScan reg mode doubles the scanning depth to 1 1/2 inches (38 mm)* A wide LCD array indicates an approaching stud* A full LCD arrow audio tone and SpotLite reg Pointing System alert users when stud edges are located* Patented SpotLite reg Pointing System and audio alert identify targets instantly* AC Scan finds and traces live unshielded electrical wire up to 2 inches (51 mm) deep* Metal mode locates non-ferrous metal such as copper pipes up to 1 1/2 inches (38 mm) deep and ferrous metal such as rebar up to 3 inches (76 mm) deep* WireWarning reg detection indicates the presence of live unshielded electrical wire up to 2 inches (51 mm) deep in stud and metal scanning modes* Patented TruCal reg technology calibrates to any wall rsquo;s density and a TruCal reg icon alerts the user when the tool is calibrated and ready to scan http://www.zircontools4u.co.uk/zircontools_zir62120-zir62120-zircon-multiscanner-pro-sl_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON MultiScannerMon, 24 Feb 2014 22:15:36 +0000 Zircon rsquo;s StudSensor trade; i65 OneStep reg quickly and easily locates the edges and center of wood and metal studs and joists behind walls floors and ceilings. Patented CenterVision reg technology finds the center of studs in a single pass. Its easy-to-read display screen indicates directions edges and center of studs while WireWarning reg detection indicates the presence of live AC voltage.* Stud Scan mode locates the edges and center of wood or metal studs up to 3/4 inch (19 mm) deep* DeepScan reg mode doubles the scanning depth to 1 1/2 inches (38 mm)* LCD display indicates direction edges and center of studs* Patented SpotLite reg Pointing System and audio tone signals when the stud center is reached* WireWarning reg detection indicates the presence of live unshielded electrical wiring up to 2 inches (51 mm) deep* ACT trade; (Auto Correcting Technology) automatically corrects common user errors such as when scanning begins over a stud http://www.zircontools4u.co.uk/zircontools_zir62128-zir62128-zircon-studsensor-i65-one-step_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Center FindersMon, 24 Feb 2014 22:15:36 +0000 Finds the centre and edges of wood or metal studs or joists up to 38mm deep. Locates metal pipes or rebar up to 76mm deep and live electrical wires up to 51mm deep. ACT Auto Correcting Technology corrects common user errors automatically. Other features include a floating head desgin ultra-bright LCD screen and build-in markerFeatures:Finds Stud EdgesFinds Stud Centre with CenterVision TechnologyFinds Studs up to 19mm Finds Studs up to 38mmWireWarning DetectionScans for MetalScans for ElectricalACT Auto Correcting TechnologyLCD Display ScreenSpotlite Pointing SystemSignal Strength IndicatorFinds Studs in Lath and Plaster http://www.zircontools4u.co.uk/zircontools_zir62134-zir62134-zircon-multiscanner-i700-one-step_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON MultiScannerMon, 24 Feb 2014 22:15:36 +0000 StudSensor trade; Pro SL quickly and easily locates the edges of wood and metal studs and joists behind walls floors and ceilings. The patented SpotLite reg Pointing System shines a beam of light on the wall to identify the target.* Stud Scan mode locates the edges of wood or metal studs up to 3/4 inch (19 mm) deep* DeepScan reg mode doubles the scanning depth to 1 1/2 inches (38 mm)* Red LEDs light up every time a stud edge is approached* Patented SpotLite reg Pointing System an audio alert and a green LED signals when the stud edge is reached* Should scanning begin over a stud Zircon rsquo;s patented "over-the-stud" indicator alerts the user to start the scan in a new location* Patented TruCal reg technology calibrates to any wall rsquo;s density and a steady green LED TruCal reg light alerts the user when the tool is ready and calibrated http://www.zircontools4u.co.uk/zircontools_zir62135-zir62135-zircon-studsensor-pro-sl_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Edge FindersMon, 24 Feb 2014 22:15:36 +0000 StudSensor trade; SL quickly and easily locates the edges of wood and metal studs behind drywall. The patented SpotLite reg Pointing System shines a beam of light on the wall to identify the target.Use the StudSensor trade; SL to hang pictures and mirrors anchor top-heavy furniture such as bookcases and mount flat-panel televisions on the wall.* Locates the edges of wood or metal studs up to 3/4 inch (19 mm) deep* Red LEDs light up every time a stud edge is approached* The patented SpotLite reg Pointing System an audio alert and a green LED signals when the stud edge is reached* Should scanning begin over a stud Zircon rsquo;s patented "over-the-stud" indicator alerts the user to start the scan in a new location* Patented TruCal reg technology calibrates to any wall rsquo;s density and a steady green LED TruCal reg light alerts the user when the tool is calibrated and ready to scan http://www.zircontools4u.co.uk/zircontools_zir62138-zir62138-zircon-studsensor-sl_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Edge FindersMon, 24 Feb 2014 22:15:37 +0000 Prevent serious water damage in your home with the help of Leak Alert trade; water detector. This self-contained battery-powered unit will sound a loud alarm the second it gets wet alerting you to a potential water leak.Place it anywhere the potential for flooding or leaking exists:- Under sinks- Near water heaters- In basements- Near dishwashers and refrigerators- Under fish tanks- Near plumbing and toilets* Loud alarm (85 dB) sounds with direct water contact* Floats and signals for up to 72 hours* Fully automatic operation - no wiring required* Low battery indicator for optimum safety and performanceHow does it work?The Leak Alert has two external metal strips with mild electrical current running through them. If both strips get wet through a plumbing leak flood or surrounding moisture condensing on the surface the electrical circuit will complete and the alarm will sound. These strips are placed close together and run to the bottom of the Leak Alert so even the slightest bit of water will be enough to complete the circuit and warn you of the problem.Metal stripsMake sure the Leak Alert is placed on its back with the metal contacts touching the surface. You can test the unit by touching both strips with one finger but be prepared for the loud alarm! http://www.zircontools4u.co.uk/zircontools_zir62143-zir62143-zircon-leak-alert_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Water DetectorsMon, 24 Feb 2014 22:15:37 +0000 StudSensor trade; Pro LCD quickly and easily locates the edges of wood and metal studs and joists behind walls floors and ceilings. Its easy-to-read display screen indicates stud edge the patented SpotLite reg Pointing System shines a beam of light on the wall to identify the target and WireWarning reg detection indicates the presence of live AC voltage.* Stud Scan mode locates the edges of wood or metal studs up to 3/4 inch (19 mm) deep* DeepScan reg mode doubles the scanning depth to 1 1/2 inches (38 mm)* Easy-to-read LCD display indicates when a stud edge is approached* Patented SpotLite reg Pointing System and audio tone signals when the stud edge is reached* WireWarning reg detection indicates the presence of live unshielded electrical wiring up to 2 inches (51 mm) deep* Should scanning begin over a stud Zircon rsquo;s patented "over-the-stud" indicator alerts the user to start the scan in a new location* Patented TruCal reg technology calibrates to any wall rsquo;s density and the TruCal reg icon indicates when the tool is ready and calibrated http://www.zircontools4u.co.uk/zircontools_zir62147-zir62147-zircon-studsensor-pro-lcd-edge-finder_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Edge FindersMon, 24 Feb 2014 22:15:37 +0000 Locate embedded metal before your drill bit or saw blade does. MetalliScanner reg MT 6 is the tool you need if you are sawing concrete slabs or walls that contain rebar conduit or plumbing. This powerful dedicated metal scanning tool can locate metal up to 6 inches (152 mm) deep in solid concrete.MetalliScanner reg MT 6 locates both ferrous and non-ferrous metal up to 6 inches deep in concrete and other non-metallic surfaces. It also differentiates between ferrous and non-ferrous metal targets and indicates the target depth in inches and centimeters.MT 6 indicates when you are approaching a metal object with a large plus (+) sign on the display. When the plus becomes a minus (-) you have crossed over the target and are now moving away.Use MetalliScanner reg MT 6 to find or avoid rebar cables pipe nails in reclaimed wood nails/tacks in studs behind lath plaster walls electrical boxes and conduit and more.MetalliScanner reg MT 6 is the tool recommended in the suggested protocol for the My Safe Florida Home Program to assist in hurricane loss mitigation.* Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe)* Shows the depth of metal from the surface in both inches and centimeters* Easy-to-read LCD screen identifies the location of metal objects to the nearest inch and depth to the nearest 1/2 inch (13 mm)* Helps map out the grid of metal through any nonmetallic construction material including concrete tile and marble http://www.zircontools4u.co.uk/zircontools_zir62151-zir62151-zircon-metalliscanner-mt6_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Metal FindersMon, 24 Feb 2014 22:15:37 +0000 MultiScanner reg i520 OneStep reg quickly and easily locates the edges and center of wood and metal studs and joists behind walls floors and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions while the ultra-bright display screen SpotLite reg Pointing System and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.* Stud Scan mode locates the edges and center of wood or metal studs up to 3/4 inch (19 mm) deep* DeepScan reg mode doubles the scanning depth to 1 1/2 inches (38 mm)* An ultra-bright LCD screen indicates direction edges and center of studs* AC Scan finds and traces live unshielded electrical wiring up to 2 inches deep* Metal mode detects non-ferrous metal such as copper pipes up to 1 1/2 inches (38 mm) deep and ferrous metal such as rebar up to 3 inches (76 mm) deep* WireWarning reg detection indicates the presence of live unshielded electrical wire up to 2 inches (51 mm) deep in stud and metal scanning modes* ACT trade; (Auto Correcting Technology) automatically corrects common user errors such as when scanning begins over a stud http://www.zircontools4u.co.uk/zircontools_zir62291-zir62291-zircon-multiscanner-i520-one-step_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Center FindersMon, 24 Feb 2014 22:15:37 +0000 MetalliScanner reg m40 quickly and easily detects metal in wood drywall paneling tile stucco plaster concrete and other non-metallic surfaces. It locates ferrous (magnetic) metal up to 4 inches (102 mm) deep and non-ferrous (non-magnetic) metal up to 2 inches (51 mm) deep.MetalliScanner reg m40 solves the very difficult problem of finding studs in lath and plaster walls. It works by finding the pattern of nails that attach the wood lath to the studs. MetalliScanner reg m40 finds plumbing ductwork rebar nails and screws in your walls floors and ceilings and is great for scanning reclaimed lumber for hidden metal.MetalliScanner reg m40 has two scanning positions each with a progressive LED display. As it approaches a metal object the red LEDs progressively light from the bottom up. The top lighted blue coil and an audio tone indicate when a metal target is located.* Use Pinpoint Scan to locate small metal objects such as screws and nails* Use Wide Scan to detect metal in walls or concrete* LED arrays indicate signal strength http://www.zircontools4u.co.uk/zircontools_zir62616-zir62616-zircon-metalliscanner-m40_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Metal FindersMon, 24 Feb 2014 22:15:37 +0000 LaserBall 360 trade; is a spherical rotating laser that projects level or plumb lines on walls floors and ceilings.No bigger than a tennis ball it rsquo;s so easy to use even a novice will experience instant success.Just attach the mounting cup to almost any flat surface with the included non-marring self-adhesive discs. Then place LaserBalll 360 trade; in the cup turn it on and watch the internal LED glow a cool blue to indicate that the unit is on.Rotate the ball to project either a horizontal or vertical line as desired and adjust the ball in its mounting cup to determine the length of the line. It is the ideal tool for anyone who wants to hang pictures shelves cabinets and other objects straight the first time. Projects a straight laser line in any direction along flat surfacesEasy-to-read bubble level ensures laser projects level and plumb linesMounting cup temporarily fastens to wall for hands-free operationInternal blue LED illuminates bubble level for better visibility http://www.zircontools4u.co.uk/zircontools_zir62268-zir62268-zircon-laserball-360-level_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON LevelingMon, 24 Feb 2014 22:15:37 +0000 The maker of the original StudSensor trade; is now taking stud finding to the next generation. First in a new line of product overhauls the StudSensor trade; EDGE is a complete redesign of Zircon rsquo;s most popular tool.Its new patent-pending pinch grip design features a body molded specifically to fit comfortably in the palm of your hand. The end result is a secure hold in either hand at any angle providing a new level of ease comfort and utility to the user. The EDGE also features a user-friendly interface and improved SpotLite reg Pointer System which shines a bright arrow-shaped beam on the wall to clearly identify the edge of the target.The bevy of improvements and the revolutionary new design make it our best entry-level stud finder yet.Locates the edges of wood or metal studs up to 3/4 inch (19 mm) deep.New "Ready" light indicates when calibration has completed successfully.New "Edge" light indicates when the tool is over a stud edge.Updated SpotLite reg Pointer System shines an arrow-shaped light on the wall to mark the target.Should scanning begin over a stud Zircon rsquo;s patented "over-the-stud" indicator alerts the user to start the scan in a new location.New ergonomic design can be comfortably held in either hand at any angle. http://www.zircontools4u.co.uk/zircontools_zir63793-zir63793-zircon-studsensor-edge_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Edge FindersMon, 24 Feb 2014 22:15:37 +0000 The StudSensor trade; e40 quickly and easily locates the edges of wood and metal studs and joists behind walls floors and ceilings. It features a new user-friendly interface an improved SpotLite reg Pointer shines a beam of light on the wall to identify the target and WireWarning reg detection indicates the presence of live AC voltage. Its new patent-pending pinch grip and contoured shape provide an easy secure hold in either hand at any angle.Locates the edges of wood or metal studs up to 3/4 inch (19 mm) deepDeepScan reg mode doubles the scanning depth to 1 1/2 inches (38 mm)New "Ready" light indicates when calibration has completed successfullyRed arrows light up sequentially as the stud finder nears a targetNew "Edge" light indicates when the tool is over a stud edgeUpdated SpotLite reg Pointer shines an arrow-shaped light on the wall to mark the targetWireWarning reg detection indicates the presence of live unshielded electrical wiring up to 2 inches (51 mm) deepShould scanning begin over a stud Zircon rsquo;s patented "over-the-stud" indication alerts the user to start the scan in a new location http://www.zircontools4u.co.uk/zircontools_zir63964-zir63964-zircon-studsensor-e40_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Edge FindersMon, 24 Feb 2014 22:15:37 +0000 The StudSensor trade; e50 quickly and easily locates the edges of wood and metal studs and joists behind walls floors and ceilings. Its easy-to-read display screen indicates stud edges the patented SpotLite reg Pointer shines a beam of light on the wall to identify the target and WireWarning reg detection indicates the presence of live AC voltage. Its new patent-pending pinch grip and contoured shape provide an easy secure hold in either hand at any angle.Locates the edges of wood or metal studs up to 3/4 inch (19 mm) deep DeepScan reg mode doubles the scanning depth to 1 1/2 inches (38 mm)Easy-to-read LCD display indicates when a stud edge is approachedUpdated SpotLite reg Pointer shines an arrow-shaped light on the wall to mark the targetWireWarning reg detection indicates the presence of live unshielded electrical wiring up to 2 inches (51 mm) deepShould scanning begin over a stud Zircon rsquo;s patented "over-the-stud" indication alerts the user to start the scan in a new locationPatented TruCal reg technologyindicates when the tool is calibrated and ready http://www.zircontools4u.co.uk/zircontools_zir63969-zir63969-zircon-studsensor-e50_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Edge FindersMon, 24 Feb 2014 22:15:37 +0000 The StudSensor trade; e30 quickly and easily locates the edges of wood and metal studs. It features a new user-friendly interface an improved SpotLite reg Pointer shines a beam of light on the wall to identify the target and WireWarning reg detection indicates the presence of live AC voltage. Its new patent-pending pinch grip and contoured shape provide an easy secure hold in either hand at any angle.Locates the edges of wood or metal studs up to 3/4 inch (19 mm) deepNew "Ready" light indicates when calibration has completed successfullyRed arrows light up sequentially as the stud finder nears a targetNew "Edge" light indicates when the tool is over a stud edgeUpdated SpotLite reg Pointer shines an arrow-shaped light on the wall to mark the targetWireWarning reg detection indicates the presence of live unshielded electrical wiring up to 2 inches (51 mm) deepShould scanning begin over a stud Zircon rsquo;s patented "over-the-stud" indication alerts the user to start the scan in a new location http://www.zircontools4u.co.uk/zircontools_zir63987-zir63987-zircon-studsensor-e30_pi-1.html?osCsid=3tjhrv6no3v7063pgpmpvt5ll4 ZIRCON Edge FindersMon, 24 Feb 2014 22:15:37 +0000