CiscoSims.blogspot.com

I hope you enjoy being here I look forward to seei...

2011-12-06T00:51:58.257-08:00

I hope you enjoy being here I look forward to seeing your posts :)

do i require to add drop command or not ????? if i...

2011-09-05T05:39:44.547-07:00

do i require to add drop command or not ?????
if i give will the marks will be deducted ha ????? pls guide me on this ...

Increment: 4 (/30 = 255.255.255.252 or 1111 1111.1...

2011-06-21T05:35:22.311-07:00

Increment: 4 (/30 = 255.255.255.252 or 1111 1111.1111 1111.1111 1111.1111 1100)
Network address: 192.168.4.4 (because 4 = 4 * 1 and 4 < 5)
Broadcast address: 192.168.4.7 (because 7 = 4 + 4 - 1
Please Explain how to find Network and Broadcast Address

R4#configure terminal R4(Config)#int s0/0 R4(Confi...

2011-06-19T19:49:51.206-07:00

R4#configure terminal
R4(Config)#int s0/0
R4(Config-if)#ip summary-address eigrp 123 10.0.0.0 255.0.0.0
R4(Config-if)#end
R4(config)# copy running-config startup-config

But in real exam if you don't see th line:

"10.0.0.0/8 is a summary, 00:14:07, Null0",then you can summary using network 10.2.0.0/16.

You can use gns for layer 3 switches, by choosing ...

2010-10-21T02:58:19.799-07:00

You can use gns for layer 3 switches, by choosing the nm-16esw. the only prob is that it is the old way of vlan database--pain after you get used to global vlan config.

Why not started in en command instead of conf t? ...

2010-10-05T09:34:44.805-07:00

Why not started in en command instead of conf t?

why exit instead of end?

Hi my sweet Buddy’s, ...

2010-07-30T04:06:57.352-07:00

Hi my sweet Buddy’s,
Toady I completed my CCNP Composite exam & scored 991/1000.

Questions are from Test-inside dumps TI 5.25, it’s a valid one.

Got 4 SIMS:
AAA DOT1X Radius
IPV6 Virtual Link
EIGRP ISIS redistribution
EIGRP Stub

3 SPOT
HSRP
EIGRP Simlet
Spanning tree

No Drag & Drop……………………
Best of Luck guys…………. Only 1 day is left
Thanks to ciscosims……… It’s a nice site to refer………

It shows the decriment value of 5 not 11, I am thi...

2010-07-25T11:29:04.022-07:00

It shows the decriment value of 5 not 11, I am thinking they are asking for a range. When I took the exam I answered C for questiong #1 and got it correct. All the provided answers are correct.

I scored a 930/1000 on my BCMSN, I also encountered an additional LAB than the ones posted here. The LAB included an implementation of EIGRP, requiring creation of 3 SVI on a Layer 3 switch each wit /27 subnets. Static default route not allowed. Also 1 device attached to each svi requiring external access through Layer 3 switch.

I am confused as well on question #1. It shows the...

2010-07-17T11:14:36.246-07:00

I am confused as well on question #1. It shows the decriment value of 5 not 11. So the correct answer should be A?

I am confused as to why the answer for #1 is not A...

2010-07-16T12:02:34.237-07:00

I am confused as to why the answer for #1 is not A? Doesn't the command listed below set the decriment value to 5?:

standby 2 track GigabitEthernet 1/0/1 5

Wouldn't you want to make a change in decriment value of 5 to a value of 15 as in answer A?

Thanks

2010-07-06T22:29:53.598-07:00

Thanks

Are there no Labs for the ONT? I have to pass this...

2010-07-06T09:15:32.546-07:00

Are there no Labs for the ONT? I have to pass this last one by the end of this month :(

Hi guys, thanks for the good job you are doing in ...

2010-07-06T09:10:40.318-07:00

Hi guys, thanks for the good job you are doing in this site. I just passed my 642-892 composite exam today. The exam had 4 simulations and 3 hotspot. I got 975 marks. Keep doing the good works. Cheers

I work as a chat support for a mobile company. Eve...

2010-07-06T04:59:16.808-07:00

I work as a chat support for a mobile company. Every now and then I get not-so-nice chats. How do i get their IP so I can report or block them? Your response will be highly appreciated. Thank you in advance!

vpn

yesterday i passed exam but unfortunatly pppoe lab...

2010-07-02T09:18:34.613-07:00

yesterday i passed exam but unfortunatly pppoe lab unable to execute fully, bcoz this command was not executing,unrecognised command,
tried in all possible ways to execute this command using ? also but no way. please let me know y it is happen, pppoe-client dial-pool-number 1

Version-Dependent Transparent Mode—In VTP version ...

2010-06-23T06:56:19.395-07:00

Version-Dependent Transparent Mode—In VTP version 1, a VTP transparent switch inspects VTP messages for the domain name and version, and forwards a message only if the version and domain name match. Because only one domain is supported in the supervisor engine software, VTP version 2 forwards VTP messages in transparent mode, without checking the version.

in this lab use only network 10.2.2.x and 10.2.3.x...

2010-05-26T00:43:14.970-07:00

in this lab use only network 10.2.2.x and 10.2.3.x so summary for it prefix, but summary by classes network must normal working - this is not right decision...

How about this configuration ... ?? interface e...

2010-05-24T07:57:24.549-07:00

How about this configuration ... ??

interface e0/0
no ip address
pppoe enable
pppoe-client dial-pool-number 1
no shut

inter dialer 1
ip add negotiated
encapsulation ppp
dialer pool 1
ip mtu 1492
ip nat outside
no shut

inter e0/1
ip add 192.168.1.1 255.255.255.0 (show run to verify IP !!!)
ip nat inside
no shut

ip route 0.0.0.0 0.0.0.0 dialer 1
ip nat inside source list 1 interface dialer 1 overload

access-list 1 permit 192.168.1.0 0.0.0.255 (again show run to verify IP !!!)
copy run start

The Traffic can be any type, and icmp is a kind of...

2010-05-24T03:03:20.117-07:00

The Traffic can be any type, and icmp is a kind of traffic, so if the source traffic is 198.133.219.135 and is pinging 172.16.81.108,

There will be echo-reply

Yes, I saw it today.

2010-05-13T09:57:25.863-07:00

Yes, I saw it today.

Delay (in redistribution command) = 100 (microseco...

2010-05-11T01:15:15.548-07:00

Delay (in redistribution command) = 100 (microseconds)/10 = 10 (tens of microseconds)

Hi CiscoSim, Do we have to change VTP version 2 s...

2010-05-09T17:03:24.990-07:00

Hi CiscoSim,

Do we have to change VTP version 2 so that it will forward the advertisement as version 1 would not (default), for the last part?

Bandwidth = 512 kbps Delay = 100 Reliability = 255...

2010-05-06T18:04:05.182-07:00

Bandwidth = 512 kbps
Delay = 100
Reliability = 255
Load = 1
MTU = 1500

Amadiya(config-router)#redistribute isis level-1 metric 512 10 255 1 1500

The delay variable be set to 100 not 10?

why not use standart access-list ? access-list 10 ...

2010-05-06T02:15:26.431-07:00

why not use standart access-list ?
access-list 10 permit 172.120.40.0 0.0.0.255

fa0/1 is root ports for VLAN 1,106 sw-a - probably...

2010-05-06T00:32:07.030-07:00

fa0/1 is root ports for VLAN 1,106
sw-a - probably root, then see bridge id in listening commands:
Root ID priority for VLAN 1: 32769
ROOT ID priority for VLAN 106: 24682

why answer D. 32769.000d.65db.0102 ???