Those who seek chemical resistant coatings products are often faced with a plethora of very bewildering merchandise, especially if they rely on what can be found on the Internet. It would appear too, that many of those found cannot truly stand behind their products with actual scientific facts. Unfortunately they do not possess the industry proven techniques that Silikal does.

Of course those who seek some kind of chemical resistant coatings products do so because they are tired of having to defray the very expensive costs of not only premature repairs to their floors, but even having to totally need to seek total replacements for their flooring. Granted, some businesses utilize some amazingly harmful cleaning solvents and oils, even acids. These then totally erode most floors, but not when Silikal is utilized on floors that call for chemical resistant coatings products.

You see, Silikal offers a flooring solution that is proven to offer the more than adequate resistance to any chemicals currently in use. This is why Silikal is used in laboratories, and wherever chemicals are utilized.

The reasons are myriad, however generally Silikal is best in that kind of environment because it totally creates a liquid as well as a vapor moisture barrier, due to its higher coating thickness. In addition, you will find that Silikal chemical resistant coatings products are chemically inert, and that is why they offer such corrosion resistance.

There are times when a chemical is accidentally spilled and thus a cleanup is hastily required. The uniformity and consistency of the Silikal flooring enables any cleanup to be hastily and easily accomplished. This kind of flooring also enables you to have high impact strength as well as excellent abrasion resistance in your flooring as well. Of course, this also leads to having an outstanding life expansion of the flooring solution too!

A very good example where Silikal flooring outshines other products is in its use in hangars. You will find that many other so called high performance flooring simply cannot last in a hangar. That’s because there are absolutely no more punishing chemicals than those chemicals used in aviation. Jet fuels alone are known to simply erode any floor almost immediately. Thus, no matter what you need to protect your floors from, be it jet fuels or any kind of chemical, check with your Silikal flooring specialists to find the right answer to your chemical resistant coatings products solution. After all, Silikal goes so much further than any high solvent coating because it is Silikal.

Aircraft maintenance hangers are one of the most difficult to find good flooring for due to the many hangar floor coating specifications. Arguments arise as to whether light coatings of greater than 16 mills, where one mil is equal to 0.001” or thicker film coatings of greater than 250 mils is correct. Then too, some quality control people prefer an overcoating sound coating system.

Whichever method is utilized, there is at least complete agreement to the following: the hangar floor coating specifications absolutely must tolerate any high moisture vapor emanation rates, must produce a suitably level surface when it is laid over coarse concrete, must have a very high impact resistance, and most also agree that it should be a proper topcoat base for at least 10 years of service.

The chemical resistance of most topcoats requires that during the initial curing of said hangar floors, meaning the first two weeks of service, any chemical spills and even any drips need to be straightaway removed from the floor surfaces. Cardboard or plastic sheets need to be placed under each tire of the aircraft, as those tires may have become warm enough to create tire imprints on the new topcoat and permanently mark it. Further hangar floor coating specifications require that only light scrubbing or mopping be allowed for cleaning. No organic solvents, abrasive particle cleansers, high pH alkali cleansers, or detergents that may contain bleach or low pH acids may be used on such flooring.

If you have read the above so far, how would you like to simply throw those entire hangar floor coating specifications out the window? If instead of the other kinds of flooring possibilities you utilize Silikal in its place you may do that very thing with complete impunity.

The Silikal aircraft hangar floor coating will provide the high performance being sought, for the Silikal flooring will resist all those grueling aviation chemicals as well as jet fuels within one hour following installation. Then too, Silikal aircraft hangar floor coatings will also enhance the light reflectivity of the hangar without succumbing to UV fading, and that is important for both workplace efficiency as well as safety. In addition, the floor will be very stress-free to clean, which saves both time and money. Hangar owners as well as contractors believed that only high solvent resisting coatings had to be used for aircraft hangar floor coatings, but now the greater majority has learned about the high performance product called Silikal which is a low solvent content flooring.

Thanks to Silikal, hangar floors are now left with flooring that will hold up to the heavy loads as well as the mechanical abrasion found in hangars. Those hangar floors that utilized the Silikal competitors in the past have unsightly and uneven floors. Only Silikal floors are perfectly even and last for years and years – so long in fact we have yet to determine just how long as Silikal floors installed decades ago are still shining like new!

If ever you have slipped on tiled flooring, you know why it’s important to have slip resistant tile porcelain. Now, you should know that there is such a thing as skid resistance scaling for floors. This is important if you are seeking slip resistant tile porcelain. The Ceramic Tile Institute has put it out, so you know for sure that it can be totally relied upon.

What you will find terribly interesting about this particular skid resistance scale is that they take into consideration a number of premises. For example they carefully look at the differences in the tile, whether it has bumps or is polished, as polished shiny tile is obviously much more slippery. They then look at the speed of the subject. This too is quite important, as a young teenager running to get to his phone can put on a startling amount of speed, as you may already be aware of. They even look at the force required to move that particular subject, and most importantly if the tile is going to be wet or dry. That alone can change the entire story, as you can imagine. Finally they even study the angle of the tile. Of course any tile will be much more slippery if on an angle rather than flat, just as snow skiing has to be done on quite an angle to get the true slippery feeling under your skis.

Some interesting asides here regarding slip resistant tile porcelain is the fact that those highly polished shiny tiles are definitely counter indicative if you have small children or the elderly who will be walking upon that tile. This is why hotel and high rise building flooring shy away from the extra polished tiles. Another aside is that the greater the tile has an anti-slip finish on it, the harder it will be to keep scrupulously clean, which is highly important in commercial bathrooms, dressing rooms, gyms and locker rooms of all kinds.

Those who are mathematically inclined will like that the way they work the slip resistance of tile, wet or dry, is to utilize the coefficient of friction. What they are seeking to accomplish is to try to meet or exceed the general safety and health needs, comprising of the American with Disabilities Act (ADA) as well as the Occupational Safety and Health Administration (OSHA) requirements.

Interestingly enough even the shiniest, most beautifully polished tile can be rendered non-slip by the application of clear Silikal. Thus, as the saying goes, you can have your cake and eat it too! What happens is that the Silikal clear coat is simply applied over the existing tile, and there it bonds so that no liquids will ever enter it. Silikal, you see, is totally impermeable and throughout the life of the Silikal application it will remain pinhole free. Silikal will rein in your now slip resistant tile porcelain so that it becomes totally slip free while retaining the aesthetic beauty of that gorgeous tile porcelain!

When you are in search of various resinous flooring specifications, you will find that ultimately one product is as good as another. Over and over again you will be faced with two very long words, so long that they will be abbreviated, and those words are Methyl Methacrylate or MMA as abbreviated and mostly known as because it is such a mouthful to pronounce.

Delving even further in resinous flooring specifications, you may make a very interesting and effectively highly meritorious discovery. Silikal does not use MMA in their resinous flooring specifications!

That is because Silikal utilizes “enhanced” MMA instead. Their researchers and scientists have found that to make a miracle product such as MMA was thought to be, into an even better product by enhancing it with a highly secretive ingredient made it completely unique.

Going one step further, you may run into businesses that badly need seamless resinous flooring specifications which have resorted to tile instead. That’s because they were led to believe that tile could be hermetically sealed against any intrusion. Unfortunately that is not so at all.

Tile, it should be clearly understood, is anything but seamless, and therefore it will actually invite microbes to infiltrate underneath and in between tiles. Once there, fungus and even staph will grow under and within its grout. What happens next is the stuff that B grade movies are made of, for usually one sees the grout itself actually begin to disintegrate as various “things” begin to live there such as bacteria, and as mentioned, even staph! All of this and more will happen since tile and grout are definitely not seamless.

Many of other types of resinous flooring specifications disregard long term wear and tear, whereas Silikal does not. Places such as department stores, for example have so much high volume foot traffic that the store must always repair its flooring, lest it become a hazard to both its employees as well as to their customers. You may be assured that being in such a position is not considered good business.

Then too perhaps your business is one that creates the floor to suffer tremendous amounts of corrosion, such as a pool chemical company There too Silikal will be your winner, for it never suffers from any kind of chemical corrosion.

Thus, just remember that all different types of MMA flooring needs to be replaced every so often, it is only Silikal that is proud to state that once applied, it will never have to be repeated again, in the floor’s lifetime. Only Silikal can make that promise!

Flooring for commercial buildings may include hospital projects, office buildings, hospitality areas, public restrooms, food markets, and even local gyms and fitness centers to name but a few. Also, flooring for commercial buildings will not include some of the necessities that industrial projects may require.

Regardless of why you need flooring for commercial buildings, you will be seeking flooring that goes on quickly and efficiently, as you do not wish to have to close simply because you are having flooring installed. In addition, you will want to have flooring that is going to last so that you do not have to repeat the project in a few short years. Also, it may be extremely important to you that you do not utilize anything on your floors that has VOC’s or volatile organic compounds. Volatile organic compounds can emit gases from some chemicals that are utilized for flooring such as adhesives typically used in traditional floor systems such as VCT tiles and commercial carpeting.

Also, you may find it of top significance that the cost of such a project does not exceed the specific budget you have been allotted. The product’s overall strength and its durability are of course important, but because it is a commercial enterprise you will also desire something that represents your specific setting. In order to do so, you may decide that sheet vinyl, linoleum’s or even vinyl composition tile is not symbolic of the professional appearance you seek in flooring for commercial buildings.

On the other hand, you may have considered some type of wood flooring, as it is both timeless and quite beautiful, but the maintenance of wood floors may be costly, and if heavily trafficked flooring is giving you pause with regard to wood, Silikal may be the answer all around. For instance, you could have wooden floors that reflect the ambiance you desire, but with Silikal protecting the wood both below and on top, you can have flooring that will last for many decades without having to maintain it. Many people are not aware that Silikal is not just for protecting concrete.

Imagine if you will 3/4″ solid wooden flooring for commercial buildings; let’s say an office building located in a high rent district. The finish on such flooring can be phenomenally posh, just as your decorator chooses. You can even have four sided tongue and groove flooring installed that will reflect the good taste of those who wish to rent in your building. Your professional flooring contractor can make sure that it will even feature stain coloring as per your decorator’s selection.

But if you stop there, damage is always a good possibility, and if ever there are any spills on that gorgeous hardwood floor, it may even find its way to stain the wood, and then move on to the subflooring. Unfortunately that is also when warping could be occasioned, and mold and mildew could set in and you may even find that extremely noxious odors may come through the wooden floor. Whatever you do, when using wood flooring for commercial buildings, be sure and protect it for good by using a vapor moisture membrane that is more than the simple sheeted paper normally provided as paper is a tremendous food source for microbes.

There are seamless floor finishes, and there are seamless floor finishes. Unfortunately even though they are named the same, they are not the same at all.

For instance, what are you being told will happen prior to those seamless floor finishes being put down? If you are dealing with a company such as Silikal the answer will be complicated. For instance, Silikal will evaluate your existing floor checking out every inch of it. They will be looking for the condition as well as the composition of the existing substrate. The actual presence of moisture will come into play, as well as checking to see if your expansion joints or cracks can be treated. Further, your present wall treatment and cove base will be carefully inspected, as will the current use of the floor, the chemical exposure, the weight loads your floor must hold, the temperature of your floor, as well as traffic patterns and traffic types. Once all of that is assessed and evaluated, then the evaluator can tell you how well Silikal will fit into your budget, your turn around time, as well as matching your desired “look.” This is only part of why Silikal delivers such tremendously successful flooring projects.

Next comes the product itself. You see Silikal utilizes what is called in the flooring industry Enhanced MMA. Silikal has created that specific product through their research laboratories. Thus by designing a flooring system which targets a specific application, the economic expenditures you will run into for Silikal flooring will be completely optimized and because Silikal outlasts any flooring system, then the actual life cycle flooring cost will be reduced to the barest minimal.

Also, Silikal offers a myriad of seamless floor finishes. Therefore it matters not what kind of industry you specialize in, Silikal handles and has experience in everything from sport stadiums to locally owned veterinary clinics. They are also providing seamless floor finishes for pharmaceutical labs, hospitals and biomedical industries. Each Silikal project is treated as if it is one of a kind, as they are fully aware that no flooring system is perfect for every situation.

In addition to the above, you will also find that seamless floor finishes from Silikal are not just formulated to be LEED compliant, but they have absolutely no VOCs! You will also get the quickest turn around time from Silikal as once applied it takes only one hour to be completely cured, thus it can then take all the foot traffic, and even forklift traffic you desire. You should also be aware that any flooring offered by Silikal can be available in sanitized, slip proof or skid mark proof modes.

It boggles the mind that there can be a chemical resistant epoxy floor coating that is so well sealed and is totally pore free enough that no chemical can penetrate it. And yet, that’s what Silikal is – totally pore free! After all today’s chemicals are so very strong and powerful that they defy description to most people except perhaps by chemists themselves. But, in all actuality there is such a product, and Silikal exists today and does not just reside inside someone’s scientific mind.

The biggest reason for desiring a chemical resistant epoxy floor coating is that so many of them fail. That’s because they are not all totally non porous like Silikal. It does take 100% nonporosity in order for any floor coating to be able to work properly in containment circumstances. Only a floor that is a true non porous floor, as Silikal, will be able to actually be utilized in such conditions as wet processing and even the total immersion environments necessary with some chemicals.

Of course, safety is always a benefit that no one can do without, especially when it concerns chemicals. The chemical industry understands that safety means eliminating slips and falls, and therefore it is always a priority in any Silikal design. Silikal flooring creates a chemical resistant epoxy floor coating that has the added benefit of being available with whatever degree of skid resistance required for any of the service conditions of those dealing with chemicals. In addition, Silikal has conveyed their own formulations of chemical resistant epoxy floor coating in such a manner that there are never any offensive, nor hazardous fumes arising from their chemical resistant epoxy floor coatings.

Those very few companies that have even come close to the Silikal chemical resistant epoxy floor coating have found that they could not possibly achieve the flooring durability that Silikal has. They tried changing the physical properties from what they thought went into Silikal for naught. It turned out that no one can beat Silikal in any manner and form.

Adding all of that together allows you to understand why Silikal is considered the best chemical resistant epoxy floor coating. However understanding how it can be distributed by the fully factory trained certified distribution network Silikal has formulated together is difficult, and therein lies the secret to Silikal’s amazing success, they care about quality people as much as they care about their quality product.

No matter what kind of concrete floor systems you are searching for, chances are that you are very perplexed as to which to use. Thus a concrete floor systems-guide to estimating and economizing has become absolutely vital in order for you to choose.

First you will need to outline each product carefully and put down each of its benefits as well as its drawbacks. Created eons ago, but always exceedingly helpful is a large T with one side of the T being for the benefits or “pros” of each product, and the other side being the negatives or “cons” of the product. Is that being too ultra-simple? Yes, but you will undoubtedly need something ultra-simple when looking for a concrete floor systems-guide to estimating and economizing.

Not all concrete floor systems are alike, as you will soon find out as you begin to make a pros and cons list as suggested. There are some products that you will mentally throw out almost immediately when you find that they exude VOCs (Volatile Organic Compounds). Some products, such as the Silikal line have absolutely none though.

Following this, you might wish to investigate the various colors and color schemes that are available with each product. Some products come in rather unimaginative colors, whereas some products, such as Silikal, seem to be able to offer you all the colors of the rainbow, so that no matter what kind of color statement you wish to make, it’s all laid out for you to choose from easily.

Next, in your concrete floor systems-guide to estimating and economizing, you will undoubtedly wish to look at how permanent each product is. Some require redoing every year, some go a few years without needing to be redone, and there is one in particular that will undoubtedly outlast the very building it has been installed in, and that product is Silikal. Economically there may be other products that are lower in cost initially than Silikal, but considering how long it will be before you even should think about replacing Silikal, will greatly change your idea of economizing on such a venture.

However, as part of estimating and economizing, also be aware that many other products force you to shut down whatever your enterprise is so that the flooring can not only be installed, but also so that it has the necessary time to cure. Some products require days to cure, others a good part of a day, but Silikal is ready for use within one hour of final installation. Be sure and note that on the plus side of your T!

Moisture prone areas will require that the concrete floor systems you choose is waterproof too of course. At this point, you will not be surprised to find that Silikal is 100% waterproof, will you?

There are some industries that require a chemical resistant floor coating. For instance the floor has to resist deionized water, methanol, ethanol, toluene, xylene, bufyl cellosolve, MEK, lactic acid, acedic acid, sulfuric acid, sodium hydroxide, sodium hypochlorite, trichloreathane, or even hot water or simply any kind of solvents, salts, alkalies, acids and oils. Such needs may come from a chemical plant, and it is important to realize that there are many areas that require a chemical resistant floor coating. For instance there are foundation pads, curbs, pits, sumps, room walls, containment walls, cove bases, as well as the flooring.

In addition, care must be taken that the thin overlay be completely seamless and also abrasion resistant and in some cases it must be shock resistant. Usually a complete must is that the chemical resistant floor coating be thoroughly non-shrinking. That allows any and all spillage of chemicals to be easily cleaned as it will remain on the top surface, disallowing cracks and crevices from providing access points to the underside of the flooring system.

The very best chemical resistant floor coating that fits all of the above parameters is Silikal. The reasons are of course that it is chemically resistant to all alkalies, mineral acids, salts, organic solvents, organic compounds, as well as any kind of moisture damage occurring from excessively hot or cold water. Interestingly enough the Silikal product may be applied even if the existing floor is deteriorated from either severe chemical attack or just due to heavy traffic, either foot traffic, or even where forklifts have damaged the floor in conjunction with chemical attacks.

If you utilize non-Silikal chemical resistant floor coatings, you will find that they only have a certain range of chemical resistance, called a certain threshold of resistance. Only Silikal is a thoroughly chemical resistant floor coating which even includes gasoline and jet fuel chemical resistance.

Also, be aware that if the reason you are looking for a chemical resistant floor coating is due to the occasional splash and spill that will be cleaned up immediately, that is entirely different from chemical spills that will remain on the surface of the floor for a possible length of time. Various chemicals actually grow in strength as they evaporate, thus be sure to mention to Silikal the varieties of spills you might encounter. When you do, the Silikal contracting specialists will make sure that you are completely covered for your kind of chemical resistant floor coating required.

Much of what Silikal does to make sure you are happy with your chemical resistant floor coating is to discuss in depth what you expect that coating to accomplish. Thus when you call Silikal, you will find that a very intelligent answer is forthcoming at all times in order to meet your specific needs.

Look up heavy duty flooring materials on the Web, and you will be greatly surprised at the results. Why? Because there are so many materials that are being touted as heavy duty, yet most of them are no more heavy duty than a silk handkerchief!

Heavy duty flooring materials should mean some kind of floor treatment that is technically made of first grade material. It should also represent a very long lasting investment, perhaps even one that never has to be replaced. On the other hand, it should also mean some kind of heavy duty flooring materials that are also beautiful, downright aesthetically pleasing. Then too, it needs to withstand the very heaviest of traffic and be completely stain proof, and be totally impervious to any scuffs and indentations. It needs to also have amazing slip resistance. Finally it must appear to be at home wherever utilized, whether in sports arenas and stadiums, office buildings, hotels, banks, grocery stores, retail chains, airports, or any other industrial or commercial area where heavy duty flooring materials are strongly desired and needed.

But then too as long as we are making impossible wishes, let’s have these materials capable of being utilized a scant hour after being laid, so that the floor is ready to undergo all that punishment practically immediately. That means that wherever it is put down one could also utilize a forklift on it within that paltry hour and never be able to damage that beautiful floor. Thus, it had better be impervious to any chemicals too, such as jet fuel, and hundreds of different caustics. There are many who, upon reading this, would say that it is the stuff that pipedreams are made of, that there are no such heavy duty flooring materials. That may be according to them, but the reason for their non belief may be well founded if they have never heard of Silikal.

You see, for many years now, Silikal has been able to deliver all of that, and much more when heavy duty flooring materials are needed by any type of enterprise. The “more” refers to not only delivering amazingly durable floors but flooring that can also be custom designed with an antimicrobial element for use in either food and drink manufacturers, or even in hospital settings and the like. The “more” can also refer to the flooring being made into an antistatic flooring solution if such is necessary. The “more” can also refer to some kind of heavy duty flooring materials that can put up with a tremendous amount of both chemical as well as abrasion resistance. Silikal can deliver all that, and still even more!

Flooring for commercial use certainly embodies a tremendous amount of different flooring. For instance we may be speaking of needing flooring for a car dealership. Thus the flooring must be very strong to not be damaged each time an automobile is brought onto the showroom floor, and it must be a very attractive floor too. You cannot put gorgeous new cars on a tattered old floor and expect people to be attracted to the shiny new cars.

On the other hand, flooring for commercial use may well mean a grocery store floor. Such a store needs to have their floors not only looking nice and professional but be attractive and clean looking. The cleanliness of such a floor is of supreme importance, for one would not wish to purchase foodstuffs in a grocery store whose floor made everyone lose their appetite. Consider too that accidents happen in grocery stores when someone knocks down a jar or two of pickles, or spaghetti sauce. The floor must be quick to clean, and it would not do if shards of glass cut open that floor either as that would lead to the floor allowing foods to infiltrate to the subflooring and putrefy there. Eventually there would be vermin in that grocery store!

Perhaps flooring for commercial use means flooring to be used in the locker room of the local country club? If so, it must also be beautiful flooring, but must also be able to put up with the rigors of dampness, foot traffic from those wearing riding boots, tennis shoes as well as the multitude of other types of shoes worn for sports. That commercial floor is also expected to be immaculate at all times, and unlike many locker rooms elsewhere, it absolutely cannot smell like a locker room. This means that never, ever is any wetness or dampness ever to be allowed in or under that floor, for trapped moisture is what makes locker rooms smell as nasty as many do!

Probably unbeknownst to all of the above who are searching for flooring for commercial use, they are all searching for the same flooring, namely Silikal. You see Silikal is a truly beautiful floor that fits in any commercial setting. A Silikal floor is so strong, that no amount of cars riding on it, and no amount of dropped jars is ever going to leave a mark upon it. As a matter of fact that floor can be put to use only one hour after it has been laid without any harm whatsoever. Cleaning a Silikal floor is a cinch even from spaghetti sauce. It is the flooring for all kinds of commercial businesses, especially yours!

In performing a careful concrete floor coating review, it is important to look at all the offerings, and thus one can pretend to be looking for one’s own business rather than looking to perform a concrete floor coating review. Our first contender in this concrete floor coating review is a product known as epoxy paint.

Epoxy paint comes in a plethora of agreeable colors, so that regardless of the color scheme you desire, you can pretty well match it. Basically it is suggested for use where a high skid resistance most probably is not required, and also is not to be used where extreme mechanical abuse may be present. Generally it is made of approximately 40% epoxy, though a few have a little less, but what is important to realize here is that it will cause evaporative odors during its application. More important is the fact that generally two full coats of the product are recommended, and the curing time for each may run from perhaps 5 to a maximum of 7 hours. Generally these are presented as DIY jobs, meaning Do It Yourself, and you will receive a warning that this kind of product is absolutely not to be utilized to fill any holes, or cracks you may have in your existing concrete.

There are, of course, other epoxies available which may not leave any odor, such a product will shrink during curing time. It offers more resistance than that above, but it may be used to repair surface irregularities, and even fill in some cracks as well as holes. The obvious problem with such a product is that it too requires two coats to reach the proper thickness, and when the product receives the addition of quartz chips, labor time is greatly intensified. Also the curing time for this kind of product is a whopping 12 to a maximum of 14 hours. Color choices are exceedingly numerous.

Next on our list of concrete floor coating review is two-component aliphatic polyurethane concrete floor coatings. These can go further as far as their resistance to chemicals, high heat, high impacts, and heavy traffic is concerned. The main drawback of this sort of concrete floor coatings is the fact that once more, two coats are required, and each coat takes approximately 4 hours each to be completely dry and considered cured, but be careful some of them take up to 24 hours of drying time! While solvent based floor coatings require extreme care during application due to having VOCs (Volatile Organic Compounds), polyurethane coatings have no VOCs.

We now come to Silikal, which has no VOCs whatsoever, and can be fully cured within one hour of application, thus there is no costly downtime and it will last as long as the property it is applied to without needing reinstallation ever. Comes in all imaginable colors, and in addition it will retain its beauty close to forever. Also, it is totally non porous, slip resistant, safe & functional, and very hygienic. A concrete floor coating review would not be complete without mentioning the best, now would it?

Today it seems as if no matter what industry one looks at, the needs of that industry with regard to their flooring, are backed by some kind of resin. Thus those industries that have been around for a while find themselves in need of resin restoration. Add to that, the needs for the floors to resist different kinds of production rigors, some mechanical damage, or replacing resins that have been eaten away by various chemicals, and the need for resin restoration is even greater.

With Silikal reactive resin restoration you will finally achieve a floor for your industrial needs that is the answer to even your high tech needs for static control, or high chemical resistance because of your particular industry. Do not think that urethane concrete coatings are the same as Silikal though. The proof will be when that same industrial floor is seen after as little as six months later and finding resin restoration necessary even this early after install. Not with Silikal.

If you have problems understanding Silikal’s amazing durability, consider the fact that what they utilize is a scientifically created enhanced methylmethacrylates referred to in the industry as MMA. The enhanced part simply means that it is much stronger than normal MMA, which is what the greater majority of the Silikal competitors are using as the enhancement formula is exclusive to Silikal alone.

Silikal will pass your most rigorous evaluations for being incredibly slip resistant too, no matter what industry you are in, from the machine ladened auto repair shops, to exquisite fine dining establishments. This is why Silikal does so well around any slippery surfaces. In addition Silikal has proven to be resistant to so many things that normally just “eat” other floors for breakfast. Take for example a floor that can resist jet fuel, Silikal can do so as proven by how many hangars have decidedly chosen Silikal as their favorite hangar floor coating.

Chances are too that if you are in need of resin restoration, you did not utilize a product as good as Silikal. After all, Silikal has often been known to last longer than the buildings it was used in. The amazing performance of this product is why Silikal is so far ahead of competitors. Put very simply, a Silikal floor will remain the very same throughout the life of that floor, namely pinhole free, non-porous, and very definitely crack resistant meaning no resin restoration necessary. In addition, it will retain its extraordinary beauty as well, allowing all who chose it to look proudly at it each and every time they see it.

Just as in anything from diamonds to concrete floor stain colors available from a company such as Silikal, you will note that there is a tremendous range of quality available. Renowned to be the highest quality available in concrete floor stains, Silikal is definitely above the rest. Consequently, there are low cost alternatives, and there is the highest quality.

The reasons behind Silikal being considered the very best concrete floor stain colors are myriad. Of course there is always floor system durability to consider, thus most businesses decide specifically on it when on the lookout for the very best concrete floor stains. In addition to their incomparable beauty, Silikal’s concrete stains actually conform to all of the possible LEED guidelines. That, of course, makes it a true “green” product, and therefore absolutely nothing like so many other concrete floor stains. Accordingly with Silikal you will obtain not only the highest quality, but also environmental stewardship.

Remarkably, when Silikal floor stains are utilized using its “earthy” colors, the Silikal floor stains actually mimic or can take on the guise of well-appointed and exceedingly luxurious flooring. This is why so many businesses use these floor stains in countless public areas such as waiting rooms in some of the poshest locations. You will note that wherever utilized, the concrete floor stain colors are actually a basis for incredible pride as that flooring is then both exceptionally elegant and yet its owners find that it brings forth tremendous protection to any concrete floor. Interestingly enough, concrete floor stains, inclusive of even the ones such as Silikal floor stains, make a tremendous decorating statement, even though they are substantially lower cost in due course, because of their tremendous ease of maintenance that only a special product such as Silikal supplies.

Thus, with the Silikal concrete floor stain colors, you will be adding not just a very luxurious feel and look to what is now most probably exceedingly drab concrete, but you will in addition be helping to keep down dust from the concrete. Additionally you might consider replacing bacteria & mold harboring carpets in your public areas. Doing so helps those with allergy problems, but then also you will find that using Silikal floor stains makes the area appear much larger and definitely brighter than carpet could ever accomplish. Today interior designers, architects and contractors alike find themselves drawn to the amazing color concrete due to the incredible unique outcome that comes from it. Ask Silikal today to see the results of using concrete floor stain colors, and be prepared to be amazed.

An outdoor flooring is so very inviting especially during the summer when the sun is warm and also appealing, so that you will want to not only cook on your bar-b-cue but also eat out there too, communing with nature and breathing the warm fresh air. A beautiful patio is a place where you can entertain too with your best friends because a patio actually invites conversation all in a casual and relaxed atmosphere. Many patios are surrounded by beautiful gardens, which might even make your patio smell heavenly. But then along comes the question of what the outdoor patio flooring should be?

Perhaps someone will mention that they visited a house lately and the owner had utilized resilient rubber floor covering on the patio. But, then when you investigated it, you found out that the rubber floor needs to be taken up, cleaned up and put back. Unfortunately bugs live under it, as well as various amounts of slime, bacterial colonies, and all manner of black fungal deposits grow under it too. That ended that idea which means that the idea of rubber paver tiles was out as well.

Granite tiles appealed eventually but were nixed because of the problems of having to regrout occasionally and the fact that they break easily, meaning inevitable tile replacement. Friends also told us that they were incredibly slippery, and we certainly did not wish to endanger our children nor their friends. Someone else suggested the snap in place patio pavers that only need to be placed on a hard surface. That meant that we’d have to pour concrete anyway, then cover up the concrete. That seemed ludicrous for outdoor patio flooring and thus we nixed that too.

Finally someone brought up Silikal’s natural pebble stone river rock flooring with a poured river rock look. That sounded incredibly natural, and it came in different colors so that we could match the furniture we had in mind for our patio. For instance, it came in Black Pearl, Razorback Red, Cantina Pink, or a lovely natural tan.

Now we were talking. Not only was it a cinch to keep clean since it was a totally seamless installation, but aesthetically we knew that it would lend such a posh elegance to our patio! The colors were all soothing, and we wanted them all, but finally settled on that lovely Cantina Pink color since pink is so outdoorsy, so that we could have a lot of pink in our furniture to tie it all in.

When the Silikal estimator came to look at our property to talk to us about using the Silikal poured river rock flooring for our new outdoor patio flooring, he actually drew up plans for us to look at. He was quite artistic and he definitely did not make a drawing of a plain looking square or oblong patio; no way. This man presented us with a huge patio that could wind it’s way around my wife’s prize winning begonias, and she was so excited by the thought that she was clapping her hands together much as our little girl does. His design would make us a patio with a truly different appearance. Then he went on to describe how long a Silikal patio would last, and seeing our four year old little girl, he said we ought to plan to have her outdoor wedding on that patio since that outdoor patio flooring would look as good then as it will look the moment it’s finished. Our choice was made knowing our investment was just that, a true investment that would last longer than we even imagined without seasonal repair and yearly maintenance.

Many have heard of the term VOCs or ‘no VOC flooring‘ but have no idea what it really means. VOCs stand for Volatile Organic Compounds which are emitted from some liquids or solids. Some of them have short as well as long–term adversarial health effects. Of the many examples are such things as varnishes, paints, stains, wood preservatives, solvents, glues and adhesives, all of which may be utilized on your floors in one concentration or another and at any time. The problem with VOCs is that they actually linger in the air you breathe, even long after you cease to notice them, or even when the particular activity that caused them is totally concluded.

VOCs can cause some tremendous problems in humans, the worst of which is that some actually cause cancer in humans. However, commonly found are also damage to the central nervous system, kidneys, and livers. VOCs also cause nausea, loss of coordination, headaches, as well as irritability of eyes, nose and irritation of the throat. Allergic skin reactions are also very common, as well as dizziness, fatigue, epistaxis (nose bleeds), emesis (vomiting) and dyspenea (breathlessness).

As you can plainly see, any product with VOCs is rather dangerous to utilize. Thus, because certain VOCs are also found in many of our cleaning as well as disinfecting chemicals, removing any VOCs from humans has become exceedingly important. You now see the importance of a no VOC floor finish.

You can probably also understand why certain companies play down their VOCs. They use words in their advertising such as “low VOCs,” and “may be slightly irritating!” This, is not truly creative advertising, but instead seems to be deceptive advertising. Thus rather than end up with a no VOC floor finish, you end up with one that has “low VOCs.” You should also pass up floor finishes that proclaim that all the VOCs are gone when the product is totally dry and emits no more odor. Chances are that these kinds of products will have small print suggesting that they not be used around the elderly, those who are immune deficient, nor around any pets or animals, or especially small children.

Should you be seeking a no VOC floor finish, you will find none better than Silikal. It absolutely, categorically has no VOCs. Silikal will always meet any current Federal and local regulations when it comes to VOCs. Who better to accredit our flooring as voc free than the United States Green Building Council? Yes, even the ever watchful eye of government has inspected our floors deeming them LEED certified, meaning our floors meet or exceed the very stringent requirements set forth in the standards of the USGBC. We are who we say we are, and our no VOC floor finish gives proof to our good word.

No matter what business you are in having to pay for floor maintenance is something most businessmen wish they did not have to do. Yet, all floors require some maintenance, and some more than others. For example if you own an auto shop, maintenance is going to have to go further than if you own a flower shop. However, if you own a walk in clinic for example, than you are in exceptional need of low maintenance flooring options to maintain your floors in the epitome of cleanliness as well as being extremely hygienic.

However, no matter how dire your needs are, the very best low maintenance flooring options all point to using Silikal. You see, innovative technological advances enable Silikal to propose the low maintenance flooring that any savvy businesses are seeking, but we know for sure that Silikal concrete floor coatings have the lowest maintenance of them all.

The reasons why Silikal concrete floor coatings are the best in low maintenance flooring options are many. For instance, unlike so many other flooring suppliers we do a tremendous amount of preparatory work on your existing floors, prior to installing Silikal. This means that the tiniest cracks, and the smallest concrete bumps will be fixed for you, in order to have our product be applied as smoothly as conceivable.

Once this work has been accomplished on your existing flooring that is when the highly trained installer will be able to perform what we call an adherence test. During this test, the installer will verify that there is nothing that will prevent the Silikal product from completely bonding to your substrate.

The actual application is usually pretty short termed. Once applied, you may notice that should you have selected a single mono color, there are absolutely no variations in the coloring of your floor. This is very unlike our competitors, where you will see a plethora of color variations. Should you have chosen one of Silikal’s many different finishes you will be absolutely amazed at the appearance of your flooring. No matter what effect you were seeking, such as naturals, transparencies, quartz blends, flake blends, or solid flakes, your floor will be tremendously pleasing.

What’s also interesting about a Silikal floor is that the singularly beautiful as well as decorative look that your floor will have will be totally seamless, hygienic, multi-functional and most of all amazingly tough. As you may have heard, Silikal floors frequently last beyond the life of the building they were installed in, giving continued benefits in low maintenance flooring for many decades to come.

If you are searching for epoxy concrete repair now, then it is very evident that you did not utilize Silikal to begin with. But on the other hand it’s never too late to use Silikal in making your epoxy concrete repair now, but at least it will be the last time you ever need to make such repairs.

Silikal can be had in a plethora of different styles, colors and for different conditions, unlike the “one size fits all” of other concrete floorings. Silikal can be utilized as either a solid or even as a single color concrete sealer coating system.

Your installer will undoubtedly begin by using Silikal’s Patch Repair with R17. This is a mortar best described as being totally solvent free and it is made up of a 2-component methylmethacrylate resin which has been especially formulated for its high compressive strength, as well as what is known as tensile strength, which means that it can bend to some extent as needed. The fact that this Silikal product will have very low linear shrinkage means that it will not split or fall apart the way that other resins have been known to.

Once your epoxy concrete repair is completed, you will then wish for Silikal to install its final product on your concrete so that you no longer need to be bothered by such repairs again. Its top coat has tremendously low viscosity which then serves to enhance its penetrative capacity along with the sand-sprinkled surface. It has an incredible high hardness guarantee that not only will offer you exceptional resistance to chemicals, can be made antistatic, antibacterial, resist slip and falls as well as being solvent resistant if you so desire, and in addition, it can be urine resistant and UV resistant as well.

Truly amazing and very startling is the fact that once your new Silikal epoxy concrete repair and new Silikal floor is laid, you will be able to use it in any manner you wish in one short hour. Yes, that’s how long a Silikal floor must dry or cure prior to any use. That means you could drive cars on it even if its tires are blazing hot, or you can use flooring’s greatest enemy, the forklift on it right after that short term cure, and thereafter without having to worry about ever harming that now truly tough floor.

So, why stick to dull dusty gray when you can have beautiful inviting fully enhanced colored flooring? Silikal is so special it can even put your logo embedded into your floor if you so desire!

Those who are seeking flooring for office conference room utilization usually want something that speaks of the seriousness of the consultation. This would relate to such a conference room in an attorney’s office, or perhaps a loan committee, or even a real estate closing being held at a title company. Either way the flooring for office conference room use must be extremely professional. The office itself may be a high-end traffic area but it may simply flow into the flooring for office conference room, thus sometimes all the same flooring is utilized.

Basically everyone agrees though that a conference room ought to be elegant, highly sophisticated and finally it must be durable. Thus the choice must not only be hard working but very stylish as well.

Consider well what Silikal has to offer for conference room use, after all their products are incredibly beautiful as well as durable. Their different flooring categories will bring you flooring that not only can meet your performance demands, such as possibly heavy foot traffic, yet it will still bring you the aesthetic flooring you desire.

Add to all of that the fact that Silikal has about the easiest maintenance demands of any flooring, and you will agree that Silikal is the best choice for your office flooring. As if that were not enough, Silikal also brings you flooring for office conference room use that can be personalized by reproducing your logo directly into the floor, which many title companies have done.

Note that for over 50 years Silikal has provided their clients, who themselves are often professionals, the most professional levels of service and brought them timely and clear information about their innovative quality of superb flooring selections. Silikal has continually been committed to provide flooring for office conference room utilization with the knowledge that they offer you the optimal solution for your needs.

Silikal fully understands that it is imperative that they install a floor for you that will set the right mood for your particular setting, after all your flooring for office conference room will be utilized for the business you specialize in. They wholly realize that you wish to fashion an appropriate ambiance. Silikal knows that whichever type of flooring you select, you will need to ascertain that it’s robust enough so that it can absorb the traffic that will go to your office, thus you will want it to be installed swiftly and logically you will desire for it to be easy to maintain. When you look at what Silikal has to offer you, you too will know that Silikal is the flooring you are seeking for your conference room.

Whether you currently live or work in a high rise building office setting, surely there are many items that you would wish to change if having a high rise building floor plan were left up to you to devise. There are many who look at high rises and dislike them on sight. Asked why, usually the answer is that high rises create concrete canyons, and if they are located on the beach, they cast too big a shadow.

But what if a high rise building floor plan included tremendous green areas around it, and what if there were limits set as to how high such a building could go? Many then say that they find a high rise more feasible if those facts were in existence. Well, there, that takes care of the outside, but what of the inside?

If one is looking at an office high rise building floor plan, then surely it needs to have a very posh entry. That means that it needs to have a very nice lobby, perhaps with a fountain in the middle of it. The floor of said lobby needs to be made of maybe marble so that it appears even richer if possible. The marble needs to be made non slippery though so that those entering from the revolving doors or the side doors cannot slip and fall due to wet or snow covered feet. That’s where the idea arrives to discuss these plans with Silikal.

You see, Silikal is the number one expert on such flooring, as well as rendering it non slippery. In addition, Silikal has been known to work with the construction of fountains, sealing the fountain so that there will never, ever be any leaks. Back to the flooring, a Silikal floor also will never wear out, and will not show foot traffic, nor even develop scratches upon it!

Moving onward to the elevators now. Of course, those who design such a high rise floor plan want the elevators to also have beautiful floors, thus once more Silikal will be called upon to design the perfect flooring for the elevators. Marble is too heavy for elevators, thus they will undoubtedly come up with something that is extraordinarily elegant, yet does not bog down the elevator’s lifting forte.

Each office wants to have their own high rise building floor plan to match what their interior designers have in mind. Some want a gorgeous imported wood floor, and some want polished and stained concrete that is highly colored. Yet another office wants a floor that has their logo in the floor, and it’s a huge logo. Believe it or not, Silikal is going to please all those offices, and has the absolutely perfect product for each of them.

Of course anywhere there are stairs there is always a safety concern. However, if the industrial concrete stairs being installed are Silikal, then there really is nothing to worry about.

Worry should be placed though if your industry has industrial concrete stairs that are worn, or that are broken off along the edges. There should also be a lot of worry associated with stairs that have had those sticky pieces of plastic ‘tabs’ glued onto the stairs in order to make them, “safer.” As the saying goes, they are an accident simply waiting to happen.

There are some industrial concrete stairs that replace wooden stairs, because these industrial wooden stairs are often worn, and thus have required those non-slip treads that either stick on, or are so slippery as to actually cause skids and falls on stairs. Not only can such treads cause slips and falls, they are also ungainly – unquestionably, and extremely obnoxious to behold.

Replacing such antiquated wooden stairs with industrial concrete stairs utilizing Silikal, one notes that this remarkable flooring itself is actually entirely made of a reactive acrylic resin coating that has been treated especially to be a non-slip coating. Silikal developed it especially for safety on stairs, thus ascertaining that safety always comes first.

Imagine if you will, what Silikal industrial concrete stairs can bring you? First, it is highly wear resistant, as well as being liquid-proof. That also means that it is resistant to any kind of weathering, and provides totally electrically non-conductive stairs, which in some industries is an absolute necessity. In addition Silikal’s industrial concrete stairs offer greater resistance to either hot water, or chemicals. Best yet, when Silikal is utilized on stairs, it is exceptionally quick curing. That means that those stairs will achieve full compressive strength within a mere hour. And if your industrial concrete stairs are located outside and it is wintertime, those Silikal reactive resins will cure just as quickly, even if your space is as low as -10 °C. That also means that Silikal is also perfect for freezer floor stairways too!

Thus, if your stairs need work and need to be leveled out because the concrete has gotten bumpy, or you have broken edges on your concrete stairs, the totally wear resistant industrial concrete stairs from Silikal are your perfect answer. Because of how quickly Silikal sets, you will never have costly downtime as you would with most other products. The results of utilizing Silikal are that it will be stronger than the concrete it was applied to!

If your business entails any liquids chances are that you are seeking the very best sanitary floor drain design. In addition, you are going to wish for the flooring to go by way of a sanitary flooring as well. However, prior to getting to the flooring a bit of instruction will help you understand the terms utilized.

For instance when speaking of an indirect waste pipe, it means some sort of pipe that is not connected in a direct manner to your waste system. In other words the waste liquid discharges into some kind of plumbing fixture such as a floor sink, or an indirect waste receptor. Both of these are done so that there exists an air gap in order to prevent contamination of foods. Keep in mind that such a receptor must have a corrosion resistant and easy to clean smooth interior surface. Flooring must also be easy to clean and smooth to go with the above.

The cleanest and safest floor available is Silikal which obviously goes well with an indirect waste pipe or actually any sanitary floor drain design. You see Silikal is installed in such a way that the water has but one place to go, and that is down the drain. It will not seep under the flooring where it can putrefy and cause vermin or at least mildew and other unwanted growths.

Now if you are seeking a sanitary floor drain design, then that means that you are in business. Being in business you will greatly appreciate the fact that when you use the Silikal product for your flooring, you will not need to shut down business operations for a couple of day, a weekend, or even 3-4 hours, for all it takes Silikal to cure or harden, is but one hour.

Additionally, Silikal is completely safe to utilize around food, as it is 100% completely free of any VOCs, which are Volatile Organic Compounds. Be careful if you are told that such and such a product has low VOCS. Just how low must such VOCs be for you to trust them? Please ascertain that your floors receive a no VOC product only with Silikal.

Wherever a sanitary floor drain design is needed means that water will be involved, and water and floors means slips and falls. Thus you will be more than relieved that Silikal is a product that is utilized in the slipperiest of wet conditions, such as on boat & vessel hulls that go out to sea.

And since Silikal flooring is totally non-porous, your cleaning staff will be inordinately pleased with having to clean a Silikal floor. Now, do not share this with your cleaning staff, but Silikal floors are the easiest in the world to keep clean.

If you are searching for cement coating products, and have looked at the Internet, one thing is for certain; you are aghast at how many products there are and wonder which is really best? If this is so, hopefully this will help you to decide.

Depending on your purpose for seeking cement coating products, you will need to mentally set down your goals first. For instance do you wish to find cement coating products that are right for a car dealership, an animal hospital, commercial restrooms, or a laboratory where you will definitely need chemical resistant flooring? Is one of your goals that it absolutely must be anti or non-skid? Must the correct cement coating products that you seek be antibacterial and hygienic? What about urine resistant, antistatic, or UV resistant? Perhaps you are considering only a totally waterproof product?

However, after you resolve all those questions, chances are very good that you will want a product that does not take days before you can use it, and you will probably want a product that is attractive as well as functional, and finally you will want a product that is at the top of its class for being durable. Actually no matter what type of flooring you are seeking when looking at cement coating products, there is only one product that can fulfill all those needs and even more. That is a product called Silikal.

It will never harbor mold or bacteria, and it can withstand any condition as outlined above. It will last a lifetime, yet it can cure in less than one hour, and after it cures, you can even run a car on it, or even a forklift. A Silikal floor is always safe, no matter what lays upon it, and many are shocked to hear that it can even withstand jet fuel on it, thus it’s perfect for industrial garages as well as aircraft hangers.

If you are seeking cement coating products because you are tired of having dust rise from your current cement, your dust worries will definitely be over. Should your existing cement have cracks, holes, ruptures or chips in it currently, the quality licensed applicator of Silikal will take complete care of it, and you will never be bothered by those again. Silikal is a synthetic resin unlike no other. It is made from a secret formula called enhanced MMA, thus do not be swayed by our competitors who only utilize MMA. In addition, our top quality product called Silikal truly goes beyond LEED flooring guidelines therefore you will also receive an environmental stewardship.

If you are in the need of floor resurfacing, you will find that you would be better off with the kind that is a floor resurfacing self leveler. As you will see, there are a number of reasons for this.

Due to the many interior designers who love the look, concrete floors are now the flooring of choice for commercial as well as even residential use. The best reasons for this are that since the newer artistic designs have risen, humans have become more conscious of their world, and durable flooring is now considered “green flooring”.

Thus, while remodeling and renovation of the existing building, there often already exists vinyl tiles or “glue on” carpeting that must be removed to install the new concrete flooring. That adhesive that then remains is called cutback adhesive, and unfortunately it is one of the utmost difficult substances to remove from the concrete. Chances are just removal of it could pose serious health concerns since it must be blasted, sanded, or ground off, and that may entail the release of asbestos. Granted that’s what solvents were created for, however solvents smell too much to be utilized in an occupied building, and then there are always the VOCs, or Volatile Organic Compounds. If a building utilizes such solvents that will significantly affect the LEED points.

Thus prior to using floor resurfacing self leveler products the contractor must be sure to remove all loose adhesive. Once thoroughly removed then concrete resurfacing may begin. Of course everyone knows for sure that there is no better concrete product than Silikal.

Now at this point you should understand why a self leveling product is so important. Each of the minute particles of adhesive that was allowed to remain on the substrate must be completely and painstakingly covered, and the Silikal itself must adhere and so thoroughly bond that it will never even have the opportunity to come apart. However as Silikal is totally seamless, completely non porous and won’t ever even harbor a pinhole in it, you can be sure that it will remain in place for as long as your building stands. The reason for this is that Silikal is monolithic through and through, thus when it takes a bite out of your concrete it’s there forever.

With Silikal, you will get a beautiful floor that looks as good years from now as the day it was installed. Just remember that only Silikal uses enhanced MMA to bring beauty with your floor resurfacing self leveler.

Those who are in need of industrial outdoor flooring are frequently perplexed by all the offerings out there. Who can blame them, for no matter where you look, you are told that theirs is the best, and if you begin to compare & search industrial outside floors, thankfully one name will definitely stand out as the best, and that is Silikal industrial outdoor flooring.

After all, you are seeking flooring that will be incredibly long lasting known in the trade as durable flooring. Also, you would want your flooring to be totally waterproof, as it is outdoors and will be under the elements. You will also want it to be totally resistant to light, known as UV resistance, so that your industrial outdoor flooring never fades or changes from the original color you chose.

Chances are that it is not only rain and the sun that will try to negatively change your flooring, but in Northern climes, in addition there is the freeze and thaw, as well as snow that often remain on that floor for long periods of time. These harsh elements of nature will need to enter into your decision as to which product you wish to use for any industrial outdoor flooring. While speaking of Northern climes, one must also take into account what salt does to such flooring. With Silikal on your floor you need not worry at all about how it will react to salt. Interestingly enough with industrial use, it is also important to know that no oil, and no grease will have the least effect on that flooring.

Let’s face it too, industrial down time is tremendously costly, and with other products you will have to put up with untimely replacement of your flooring, or in the least having to repair it constantly. This is the best reason yet to utilize Silikal, since it is very budget friendly in the long run.

In addition, Silikal can be installed in the dead of winter. It does not matter what the temperature outdoors is, Silikal can handle it. Silikal’s engineers and scientists have made sure that it can be installed quickly even in below freezing weather.

One of the matters that often arise when speaking of industrial outdoor flooring is how quickly it can be utilized after installation. With Silikal, the answer is that it will be ready for any and all use within a scant hour after being installed due to its high tensile strength.

If you are searching for cement coatings pool decks usage products at the moment, you probably currently own a very lackluster pool decking that has been worn out or is simply too ugly to behold anymore! Chances are that it’s damaged and badly needs a facelift, or you are just now deciding on what kinds of cement coatings pool decks you desire for your new pool. With either need, your very best outside flooring’s come from a company named Silikal.

Without any exaggeration whatsoever, they are the absolute best company when comparing any other cement coatings specifically for cement coatings around a pool deck. Silikal bonds to existing concrete so much better, and its slip resistance is bar none. Aesthetically you will absolutely marvel at its beauty, and the entire performance of your pool deck will substantially improve by using Silikal. That means that people will want to remain on the pool deck longer due to the ambiance, thus if you are a hotel or motel that has an outdoor bar poolside, you will be experiencing many more sales of both food and drinks!

There are some cement coatings pool decks usage that need to be redone every few years, but not with Silikal. You will be positively amazed at how long the useful life of Siikal pool decks is. It is an exceptionally durable surface that is totally UV resistant so that it will never fade or change color on you either.

Your interior decorator can continue to decorate all the way to the pool deck with Silikal too. The decorator will find that it’s available in a myriad of colors so that it can blend in with any of the many decorator colors that might have been chosen indoors for your hotel or motel. After all, your pool deck is going to be visible from inside all the rooms of your lodging, so blending is rather important. A natural stone look is great eye candy for pool deck areas as well. River rock pebble floors keep blend naturally with exterior settings keeping pool areas attractive and while being maintenance free.

If you currently have a wooden deck surrounding your pool area, you know that it requires not only persistent sanding as well as needing to be resurfaced regularly. Thus, you will more than likely understand the costs you will be saving by using Silikal instead of the costs being incurred by your present wood decking.

With Silikal cement coatings pool decks you will not only heighten the attraction you desire to your pool deck, but people will gravitate there and be in a party mood. Just the added income that your pool deck will generate will more than adequately repay itself quickly even without a poolside bar, since you will undoubtedly have more paying guests because of how attractive your pool area has become.

There are, of course, a tremendous amount of concrete coatings for pool decks available out there. In fact, chances are that if you are searching for such a concrete coating for your pool deck that you are completely bewildered by the myriad of choices available.

In fact you may already have an aging concrete pool deck now, and thus you may be searching for a way to somehow brighten that dreary old ashen look that currently surrounds your bright blue pool. Thus, it may well be that a concrete overlay is going to be your answer, for such an overlay will add a very colorful, fully textured and slip resistant surface to your pool deck, finally making it as attractive and safe as possible.

Not only will the aesthetics of your pool deck completely change for the better, but if you opt for concrete coatings for pool decks from Silikal, you will find that you will also be getting a pool deck that will repel any damage from abrasion, freeze-thaw conditions, UV exposure, pool chemicals, and even salt should your pool also be located where salt punishes your pool deck.

In addition to beautifying your pool deck, concrete coating for pool decks from Silikal will render that pool deck completely slip resistant, perhaps the most important factor of all. No more will you need to worry about someone slipping and falling due to the wetness of your pool deck.

Thus, now that we’ve covered the amazing beauty of your pool decking, as well as the slip resistance of it, you also need to consider that Silikal is totally non porous making care and maintenance a breeze, as it is very low maintenance, and of course will “>resist mildew and other stains. Speaking of breeze, you will also find that any Silikal concrete coatings for pool decks also makes all surfaces, such as concrete, much cooler to the touch of bare feet, something your guests will find quite enjoyable.

Any of the Silikal products for pool decks are offered in a wide-ranging assortment of colors as well as patterns in order to suit the most discriminating of tastes. The use of decorative concrete now creates an outdoor environment that cannot be matched. Descriptions of some of these pool decks are covered by such adjectives as attractive, exceptional, lavish, and exotic and even yes, romantic. And to think that all of that is due to nothing more than Silikal concrete coatings!

Those who are seeking flooring for office building use may have to take into consideration that thoughtless flooring choices may create possible problems, depending on your selection. For example imported tile is beautiful; however tile may be too slippery for use as flooring for office building application. Or, you may have mentally rejected using linoleum, sheet vinyl, or even possibly vinyl composition tile because it is in no way representational of the professional formula you seek.

Today, many office spaces are using Silikal covered seamless flooring systems. First of all in an office, chairs can then move about and roll wherever the user wishes without harming the floor. Silikal flooring is extremely simple to keep clean, is aesthetically pleasing, and above all is an eminently durable flooring. Even if your flooring for office building is going in a high rise office structure, that is not even remotely difficult for Silikal. It is easily installed in small offices without the use of large equipment, and because Silikal has no VOC’s, Silikal is a green product that can be utilized indoors with no ill effects whatsoever.

After the appalling tragedy of 9/11, flooring for office building and for high rise office buildings changed, and thus there are many updated flooring for office building use code laws. Today safety for all workers who work in such commercial high rises are mandated by these laws, and some of them are very challenging to those who work with flooring. This then is yet another reason why Silikal should be considered as the prime flooring for office building utilization. Silikal, you see, stays abreast of all of your local code laws, in addition to remaining very affordable and cost effective because of the amazing durability that keeps the flooring fresh for literally decades to come.

You will also find that only Silikal takes into account the textures and conditions of your existing flooring, because Silikal knows that diverse existing floor surfaces will have diverse needs. Prior to installation of our products, Silikal takes the necessary time to carefully inspect the existing floor to ascertain what work needs to be done before installation of Silikal.

Silikal’s flooring for office building goes on easily, even in the most cramped of office spaces, requiring absolutely no large equipment, which may be an important factor. Once applied, it takes only one hour to cure, meaning it’s ready to be worked upon even if there are multitudes of rolling chairs, heavy filing equipment, or whatever…when that hour is up…you are ready to go back to work.

In addition, once Silikal flooring systems are installed you will never again need to worry about repairs or premature replacement of your flooring. Chances are that the Silikal flooring will even outlast the lifetime of the office building!

If you are the owner of a boat, chances are that you are seeking non skid flooring for boats. You may well be thinking that it is more than time to protect your investment from all the damage that a boat may incur, or perhaps you are seeking a replacement for your decking.

The very best non skid flooring for boats is Silikal. You see, Silikal when it is utilized as flooring for your boat will perform particularly well in almost all conditions that your boat will go through.

Silikal has been around for over 50 years, and is currently utilized worldwide for a number of non skid applications such as for pool decks, gyms and for marine applications too. As a boater or perhaps as an angler you want not just non skid flooring for boats, but you desire something that will last and last. In addition when Silikal is applied to your boat, you will find that the bond is amazing, so amazing that it will totally prevent bacteria, mildew and mold from ever growing on your boat. After all those three growths cause more damage to boats than anything else possibly can. Silikal non skid flooring for boats will actually protect the surface of your boat, but in addition it truly does prevent slipping even when your boat’s deck is drenched with sea water, which in turn will protect your expensive tackle from being damaged when someone slips and falls on your boat.

Boat anglers particularly those who go out in saltwater have benefited greatly from having a Silikal non skid flooring applied to their boats. Silikal is so much protection for your boat deck that dropped items will absolutely not put a dent or scratch in the Silikal. It is that hard. That means that if someone on board drops grippers, knives, or even those large ball weights, you need no longer cringe thinking of the damage. If you skin dive, and weighty oxygen tanks are heaved onto your deck, you will no longer consider looking for damage, because it simply won’t be there with Silikal protecting your boat’s hull.

In addition, you will never again worry about the boat rocking with pounding waves and dislodging such items as the anchor, or even the oars you carry. Your hard deck protected non skid flooring for boats will be able to take the pounding, no matter what. Also Silikal. is impervious to the sun’s rays which can degrade a boat’s decking causing it to split, warp and crack. You will finally be able to keep your boat in “ship shape” with Silikal since it goes on easily and will actually harden within an hour, thus the “dry time” will not keep you out of the water either.

Utilizing a self leveling floor resin system is more than ideal for a commercial or industrial area that requires the highest durability, ease of maintenance, a tremendously high degree of sanitation as well as having an extremely attractive appearance. Some other businesses may wish to add that they need a self leveling floor resin that exhibits the highest resistance to any chemicals, heat or even corrosives. However, when you apply the very best self leveling floor resin to any floor, what you will receive in return is an extremely hard wearing floor that is the answer to the function of the commercial or industrial use, as well as being a floor resin that is very easy to maintain. All that matters then is choosing the very best in such flooring.

Of course, any research done at all on the subject will return that Silikal is actually the very best self leveling floor resin. The reasons are myriad. Probably the most important is that the list of instructions that the applicator must follow is incredibly complex. This includes such areas as making a very thorough evaluation of your existing floor. The existing substrate will be checked as to not only condition, but also composition. Moisture levels will be carefully recorded, and each expansion joint as well as any cracks found in your existing floor will be recorded for repair. The existing cove base, and the current wall treatment will also be verified and noted. Additional notes will refer to your chemical exposure, the present-day use of the floor, the various weight loads that the floor is holding, the floor’s temperature, and even your traffic patterns, and what your traffic type consists of.

Even the application of the product has been reduced to a very precise manner. For example the directions to the applicator or contractor stresses that the system needs to be applied in such a manner that everything must be uniform in appearance, texture as well as color combinations. Edges are to be uniform and kept sharp so that they are always cosmetically acceptable. That means that there can be no ragged or thick edges. It is left up to the highly trained contractor to work out any masking that needs to be done so that the results are completely acceptable.

Keeping in mind that Silikal only makes the very best self leveling floor resin product which probably will outlast the building it’s installed within, one can see why this is so. Just the very consummate professionalism utilized when it concerns Silikal makes it highly evident.

There are many industrial flooring ideas floating around on the Web, thus it is sometimes difficult to choose just one. Many people are quite perplexed with so many choices.

For instance one may decide on a gorgeous solid color concrete flooring solution, or perhaps one may decide on a terrazzo like seamless floor finish that has various colored chips throughout, as terrazzo has but without the high expense of terrazzo. Others would rather choose some kind of combination where the solid color concrete flooring solution also has ultra-tough colored quartz in it. Still others prefer some sort of concrete stain to be applied to concrete so that they get a brilliant clear gloss over the decorative concrete finish. Finally, some have seen industrial flooring ideas wherein a concrete flooring solution involves a metallic-looking finish that almost appears to be space-aged. Better yet are industrial flooring ideas where the company’s logo is actually sealed within the floor itself, making an absolutely wonderful appearance that is so very professional.

Frequently we see pictures of industrial floors that are coved when seeking ideas for industrial flooring. The reason is of course that having coved flooring allows the eye to continue upward, but the most important reason is to continue the protection that the floor can give.

Of course it all depends what you industrial flooring needs are. For instance is this flooring for a warehouse or mechanical shop, animal housing facility, http://www.silikalamerica.com/durable-garage-flooring-industrial-concrete-coating, distribution center, aircraft hangar, or perhaps a chemical manufacturing center? Each of these as listed may or may not utilize heavy machinery and forklifts. Each may not require that the flooring be calculated for outstanding chemical impact. Some need to tailor their floors for the specific needs of a particular industry.

Regardless of what industry you are in, perhaps one of those listed, or even another, you will find that Silikal is the answer to all industrial flooring ideas. For over 50 years Silikal has been utilizing their enhanced MMA, which is totally different from “regular” MMA, to fulfill the needs of those who require industrial flooring. The fact that Silikal will set up in only one hour and be completely cured in that amount of time has been beneficial to countless industries that need not close up shop for days or endless hours just because they have sought to protect their concrete flooring. Silikal is also the answer because it will potentially outlast the very building it has been installed within.

Finally, no other flooring is as beautiful as Silikal. Those who apply Silikal can promise you solid colors that are indeed solid, or flakes that will endlessly beautify your floors. No matter which look you choose, underneath is that wondrous Silikal to fully protect your concrete.

Those who seek some kind of commercial flooring in Atlanta, Georgia often turn to the Internet to locate the kind of flooring they need. Granted, just looking up Google and typing in commercial floor Atlanta will turn up a myriad of responses, in fact so many results that you will have no idea where to turn.

However, you will have gotten no further in your search for commercial floor Atlanta than if you’d utilized the old fashioned manner to look up flooring, via the Yellow Pages. Well, I take that back, at least in the Yellow Pages they would be in alphabetical order for you!

Then of course, comes the endless questions as to which is best out of all those commercial floor selections and results in Atlanta? Are you seeking a wooden floor, ceramic, laminate, concrete, tile, linoleum, natural stone, marble or what?

Granted we did mention that it had to be of commercial grade, but surprisingly there are all the above choices to be made for commercial applications, especially if one considers some of the wonderful products that are utilized to go over these various substrates. The flooring world then becomes your oyster, as they say.

Whether you are a construction contractor, an architect, or the eventual user of the product, you will find that there is a wide-ranging portfolio of different types of floors made specifically for commercial applications. These include various options for not only green construction but also for thoroughly sustainable designs. It all depends on the product you choose as well as the company that stands behind such a product.

Such products can be found not by typing commercial floor Atlanta into your computer, but rather by typing Silikal and reading about their amazing products made especially for commercial use. Silikal has tremendous uses in all types of commercial usages. Part of the reason is that Silikal is totally green, due to the fact that it is 100% patented enhanced MMA that goes down so quickly that it is available for overall usage within one hour of being laid. You may ask for it to provide as much natural splendor as you wish, but even then your flooring will always remain exquisite no matter its commercial usage.

In fact you may actually have cracks and fissures found in your existing flooring, but Silikal can fix those without any problems whatsoever. This will give your floors an incredible amount of life no matter what punishing commercial usage you have in mind for it. Again, no matter what kind of flooring you seek, Silikal will be your final answer.

If you are searching for the best industrial concrete staircases, you have definitely come to the right place. It is a well-known fact that that industrial concrete staircases are quite different from staircases found in homes, and even office buildings.

For instance, some industrial concrete staircases are there only for emergencies, so that those needing them have an egress to leave the building in an emergency, and the help needed such as firemen or other emergency workers have an access to whatever floor they are needed. Those kinds of industrial concrete staircases may even be completely out of sight until an emergency arises and then they are needed by everyone for safety reasons.

It really does not matter their function, either way the form work on them needs to meet all code requirements, and there are even code requirements for what covers those staircases as well. No matter whether staircases are precast or poured on site, the building departments check them all, making sure that risers are even and other requirements as well.

As a matter of fact today there are a plethora of industrial concrete staircases to choose from. For instance, one may wish to have a reinforced concrete staircase in the form of a spiral, others have even designed reinforced concrete staircases that feature a half turn. Of course structural requirements as well as architectural specifications must always be followed no matter what kind of staircase is being made. Naturally, customer tastes are going to prevail as well.

Once industrial concrete staircases are constructed, protecting the concrete is what is important. The very best protection for those concrete stairs and landings is of course Silikal. First of all Silikal is the perfect leveling material for making stairs, including being a completely frost proof replacement for the concrete that is found in stairway entrances to refrigerated structures. In fact, having a winter work site is simple for Silikal reactive resins, as with temperatures as low as –10 °C, the Silikal reactive resin mortars will still cure incredibly quickly, and there are even special grades that can even cure in temperatures as low as –25 °C! Even more importantly, Silikal covered concrete staircases will last longer than the buildings there are installed in.

Thus, whether you need industrial concrete staircases for emergency reasons, or as egress or ingress into your industrial complex, you will find that Silikal is highly wear resistant at all times, is resistant to any weathering, and will achieve its full compressive strength all within one hour. There is nothing better than Silikal reactive resins for your stairs, or in fact for all your concrete needs.

If you are seeking floor coverings for home gym use on the Internet, you will find so many possibilities that you are bound to be rather perplexed. Although they are not quite the same, the first thing that you will probably run into are rubber flooring rolls, as well as interlocking rubber flooring tiles, thus let’s review them first.

Whether you are at a professional gym, or a home gym, one of the things that happen at gyms is that the users sweat. When they sweat, it rolls off of them or drips off of them, and with rubber floor coverings for home gym use, that sweat is going to get under that rubber. We both know what a gym smells like, and part of the reason is that human sweat permeates everything, but mostly it is because that sweat has gotten under the rubber utilized as flooring. At first it’s not noticeable, but eventually it sours and that is because under the rubber is a plethora of staph germs and fungus that has seeped under the rubber due to minute little crevices made in the rubber. They are just pinhole openings, but they are enough to even allow MRSA to multiply under the rubber. There is a way, of course, to prevent those problems with rubber flooring and that is to pull up those mats on a daily basis, clean them with a strong disinfectant, put them up to dry completely until needed once more, but you want floor coverings for home gym use, thus it is very doubtful you want to constantly clean flooring!

Undoubtedly linoleum tiles are your next find. However remember that you are trying to outfit a home gym, and you probably will have weights there. Weights are often dropped, sometimes accidentally and sometimes because you simply cannot do another repetition. When weights are dropped, the same thing happens to linoleum tiles. Tiny cracks open up and create even tinier fissures in the linoleum, and the same problem finally exists once more with the odors, the staph, and the fungus.

Wood floors for a home gym are simply gorgeous. However there are two reasons why it is not often a good choice for floor coverings for home gym use. First of all, wood is extremely slippery when wet, thus it invites difficulties you do not wish to encounter. Next, wood is not waterproof either, and thus you would have to cover it with rubber matting while in use, which totally defeats the purpose of considering wood. Lastly, as previously mentioned weights can be dropped, moved, kicked or slid across leaving nasty scratches to deal with.

Finally, there is Silikal. A Silikal concrete coating is first of all completely functional as well as beautiful. It is non-porous, hygienic and most of all particularly simple to keep clean. Most important it is pinhole free and completely seamless, thus none of the above can happen to it. In addition it is slip resistant and it is even one of the safest floors to exercise upon. And you won’t believe how durable it is, even if you drop a hundred pound barbell on it, it won’t even scratch Silikal!

There was a time when playgrounds were covered with asphalt, and back then when there was a fall it usually resulted in bloodshed or even broken bones. Today we take better care of our children and their play areas, and have developed a poured rubber playground surface.

There are a great number of companies that will provide this service and they will present you with numerous diverse categories of poured rubber playground surface proposals, figures, logos, tints and hues as well as permutations that may be actually custom designed in order to meet or even magnify your existing playground theme. It is, after all a growing field. You should be aware that not every piece of your playground equipment requires the same poured rubber playground surface.

Jungle gyms, for instance because they are taller, and thus present a different fall height requirement than a seesaw may need, will receive an additional depth of poured rubber. Keep in mind too that there are always two separate layers to any poured rubber playground surface. That means that there is the top layer, which everyone is able to observe, and then below the top layer, is the cushion layer which will “give” to a certain extent should any child have a fall from the playground equipment.

Because all of these projects are already custom projects, when it comes time to actually pour the rubber onto the playground surface, you will be able to actually pick and choose the various color combinations that will be utilized. There are of course a myriad of different colors to choose from, and thus bright animated playgrounds that have poured rubber playground surface all around can certainly be somewhat of a jolly atmosphere, as it should be. Of course, you may also mix and match colors in order to create your own desired look, or you may decide to have large custom logos, specific themes or imaginative shapes that will thoroughly enrich the attractiveness of your own outdoor or perhaps indoor poured playground rubber surfaces!

Also, do not overlook the fact that custom surfacing shapes may be made out of any poured rubber playground surface. Thus if you wish all the surfaces covered with dazzling butterflies, that is more than possible, whereas many others seem to want to stick with well-known cartoon characters, though care must be taken to not break any trademark laws such as the ones that Disney has on all their characters.

If, however, what you are seeking is the best anti-slip flooring you truly ought to see what Silikal has to offer. It won’t be made of rubber, but many companies love how Silikal can put their logo into the flooring for posterity!

Although most historic buildings already have an existing floor, at times they do not. When they are already made of wood, it is quite acceptable to refinish the wooden floors, and thus floor coverings for historic buildings are often in the realm of having to protect wooden floors after they are refinished.

Interestingly enough there are many historic buildings that have the vestiges of their old flooring. Thus, one might run into wood floors that were adorned with pile carpeting, some of them made from rags, and others that were actually embroidered. In addition, one may find floorcloths, hooked or braided rugs, linoleum, marble, mosaics, tile and even brick. The trick is to try to match the old linoleum, tile or brick if the floors are not made of wood. Often those dealing in such historic buildings will have to turn to preservationists, engineers, and designers as well as architects and craftsmen that specialize in such restorations. As expected locating just the right floor coverings for historic buildings encompasses creating a period look, and thus it is quite a challenge to do so. What is not a challenge however, is protecting the period look once it is done. For example, let’s say that a wood floor has been terribly damaged by water intrusion, what must be done from that point on?

Of course, the damaged floor portions will be taken up but “new” wood is not going to look accurate next to the salvaged old wood. This is where restoration companies which specialize in rescued wood come in handy. These companies arrive at the tearing down of old homes, barns, churches, and anywhere where old wood was utilized, and purchase the antique wood. They then maintain these old pieces of wood in storage until floor coverings for historic buildings are needed once more.

But, once matched, the second trick is to protect said flooring of course. Assuming that the wood floor is now completely well repaired and matches the remains of the existing authentic wood, this is the point where most restorers call on Silikal. Why Silikal? Because Silikal’s products are the very best as sealing not just old wood but new wood as well putting on a sealed coating that enables everyone to admire the flooring.

Silikal’s work is absolutely perfect, even if the floor was brick, tile, marble or something else that needs to be shielded from modern scratches, dampness or other punishment. In effect, Silikal floors are so durable that they never develop wear patterns because of foot traffic over time as the old floors in the historic building did. Silikal flooring installed over the matched historic floor will not only stand up to traffic through the building, but it will constantly maintain its strength as well as its beauty.

Before you begin looking for walk in freezer floors, you should be familiar with the Energy Independence and Security Act of 2007, most often referred to as EISA. The Act mandated tighter controls on such items as walk in freezer floors, so that their construction was created to conserve as much energy as possible. Thus be aware that not all walk in freezer floors are EISA compliant, which would result in possible fines when inspection times roll around. There are also local freezer floor codes that may apply. All of this is in addition to needing a compliant floor that meets with compliance necessary for the FDA, ADA, OSHA as well as the USDA.

As can be imagined, dealing with a company who is not up to date on the above alphabet soup assortment of compliance for your walk in freezer floors may lead to non-compliance headaches that can only be conceived of. This is why you should deal with a company that has an extensive history of designing walk in freezer floors, such as Silikal.

Imagine, if you will a floor that is totally seamless, thus it bonds to any existing substrates, including metal that is virtually impossible to separate. In addition, imagine walk in freezer floors that after installation will harden or “cure” in less than on hour? Then that freezer floor is perfectly ready for use! That is what Silikal delivers.

For decades now, countless businesses involved in industrial food processing have utilized Silikal’s commercial freezer floor designs for the custom freezer floors they needed. After all, those floor systems are state-of-the-art. Only Silikal can cure in the extreme low temperatures of your freezer without any damage. Also, by being totally VOC free that means that work can continue in other parts of your facility without any problems.

Previous freezer floor designs you may have had probably presented a hug problem when it came time for maintenance and cleaning, but Silikal freezer floor designs are absolutely monolithic, and closed pore. In addition, to ensure workplace safety, Silikal freezer floor designs are anti-skid. As such, a Silikal freezer floor can shrug off the impact of any heavy loads located on lesser regions of your freezer.

Surely too, you are only too aware of the harsh cleaning agents necessary to maintain your freezer floor as it should? Silikal’s reactive resins will yield tremendous resistance to those, ensuring you decades of great value for your investment. This is why Silikal has been the mainstay for freezer floors found in all food processing industries for decades now.

If you own a commercial bar, you may well want to find the best flooring for commercial bar. If for example you own a swank new brasserie, you may be searching for something that represents a brasserie. That means that you will want design touches that emphasize perhaps late night drinking while listening to vintage soul and old rhythms as well as the newer alternative rock and roll. On the other hand, if you are in a swanky area of town, you may wish to tone down the music, and maybe have a soft feminine singer sitting at a piano creating a feeling of a laid back lounge effect with foods flowing effortlessly from waiters and waitresses that do not ever interrupt the customers yet are ready to serve them at a nod. The best flooring for either of those will, of course, be entirely different.

For example for the brasserie which will be louder and funkier, you may wish to have some kind of stone floor installed so that the rustic look of a brasserie flourishes among the stone. Stone floors are one of the best flooring for commercial bar because the floor then can be protected by Silikal’s full lifetime of the building non wearing flooring solutions. Imagine that brasserie’s floor covered with river rock that is amazingly beautiful, but then the floor continues upward into various fountains where water flows freely over the river rocks. Let’s face it; the ambiance would be absolutely extraordinary. Next to some of the fountains would be living plants that will keep down some sounds so that the music does not blare over the various discussions that the clientele is having with each other as they visit and drink.

Moving on to the swankier bar with the professional chanteuse crooning soft romantic songs, now there the best flooring for commercial bar may well be a wooden floor that has been protected with Silikal’s special floor coating sealant. Wood is after all, beautiful and brings a certain coziness to any establishment where people may gather. Once Silikal has covered the wooden floor with a shine that is awesome but also slip resistant, cleanups will be amazingly simple. Spilled beer or wine will wipe up immediately and if a tray full of food is accidentally spilled, it will clean up in the wink of an eye. What results from the use of Silikal over wood is that you now have wood that will never suffer gouges and dents from even spike heels.

Over that gorgeous wooden floor lies the reactive resin bar flooring that is not only durable, but will require very little to perhaps no repair over its lifetime. Your customers will dance on it without ever harming it, and a good time will be had by all, thanks to Silikal.

Those who are in need of anti-slip floor coating clear type frequently turn to the Internet to find a product if they have slippery floors and have dealt with expensive slips and falls. The problem with this is that they are then faced with a very bewildering array of products, all of which are claiming to be the longest lasting, the least slippery, and the clearest available.

Granted slippery floors are ordinarily caused by something other than the floor itself. For instance it may have water constantly upon it, or perhaps there is some sort of grease on the floor, or sometimes it is not a constant wetting of the floor. For those particular instances, where the floor is only occasionally wet or slippery, that seems to be the most important reason for seeking of an anti-slip floor coating clear type. The reasoning for this is that there is nothing worse than slipping when one least expects to slip. Either way, of course you wish to find the very best available, that stands to reason.

There are many who will try to tell you that their anti-slip floor coating clear type actually makes little suction cups under the clear coating and other such silly interpretations of their product. Truth is, the very best available is Silikal.

With Silikal, it is truly 100% clear. There are absolutely no tinges to its product, no color changes, and no covering of the beauty of the existing flooring. Once applied it will look exactly the same with one important difference; it will then be totally anti slip.

In addition, because it is a Silikal product, it has a VOC rating of -0-! As a matter of fact, this flooring solution is also totally odor free.

Moreover, the product works no matter what kind of surface it is applied to. That means that you can safely utilize it on fiberglass, porcelain, vinyl, granite, highly polished marble, concrete and even upon ceramic tile. It will never, ever harm your existing floor and will continue to give you a non-slip floor.

Imagine, if you will, a work area where slippery floor issues are no longer existent? Gone will be those awful and sometimes expensive incidents of slips and falls. All of this is available to you with a Silikal product, for it is truly the very best floor solution product for your existing slippery floors.

An aircraft hanger is an animal onto its own. What that means is that they are entirely special, and the floors are too. Aircraft hangar floor paint needs to be as special as can be also. For instance, the tires on the aircraft are going to be incredibly hot, thus the aircraft hangar floor paint utilized needs to accommodate those hot tires. Often the aircraft needs to be worked upon, and chemicals of all kinds are used. Occasionally those chemicals find their way onto the floor, thus the aircraft hangar floor paint must also accommodate chemicals.

Pilots will wish for the hangar floor to resist wetness too, as the aircraft is often quite wet when stored into the hangar, or needs to be washed to remove any debris that it picked up while flying. If the aircraft is utilized up North, it frequently comes in with snow on its wheels or dripping from its wings too.

Let’s face it maintaining a hangar floor is not an easy task. There will be dirt on the wheels too, and dirt blowing in when the doors are open to let the aircraft inside.

Although not necessarily called a floor paint, a Silikal floor covering system is what will work best for an aircraft hangar floor. Silikal’s product will actually chemically bond with your hangar concrete in order to form a highly durable protective film that will even be resistant to aircraft petroleum products.

In addition, cleaning the floor after Silikal is introduced into your hangar is amazingly simple as nothing ever penetrates the Silikal finish. Silikal, you see, is a totally seamless installation that is completely non porous. It is also pin hole free as well as being an anti slip flooring surface which prevents slips, falls and flooring slip associated accidents.

If and when tire abrasion occurs from the aircraft, this is considered unavoidable, but there is a Silikal answer to such tire abrasion. These can easily be removed utilizing the primary cleaner known as Silikal Topclean, which is then rinsed off with clean water.

With a whole array of colors to choose from, with Silikal you may design even a one of a kind hangar floor to not only suit your own tastes, but also become the talk of the other aircraft owners who will marvel at the extreme beauty and tidiness of your Silikal hangar floor. Call Silikal today for a free estimate.

No matter what kind of business you have, floor resurfacing is no picnic. With many resurfacings, you need to close down your business for however many days it will take not only to install the new flooring surface, but for it to be ready to go back to work. In the business of flooring and floor resurfacing, this is referred to as curing the floor.

Also, depending on whom you hire, and what the product consists of, you will be asked to remove everything that might get in the way, and also to completely clean your own floors. It is important for you to realize that this cleaning ought not to be for you to accomplish, but it should all be a part of the floor resurfacing company to accomplish.

For instance, let’s assume that you own a restaurant, and the kitchen badly requires floor resurfacing. Perhaps long ago, it was a tile floor, but today, you are always finding tile that has popped up, because dirty water has gone under the tile, causing it not only to loosen but to allow all manner of food to decay below. Chances are your kitchen has even been cited for not being clean, but it was hopeless to try to clean it in the state it was in.

Thus, now you’ve shopped around, looked into numerous products, and finally you have settled on the very best product. The Silikal crew comes into your kitchen and begins work as soon as the restaurant closes for the night, and they begin to do meticulous cleaning, making sure that not one speck of grease remains. Once thoroughly cleaned, the floor resurfacing continues by having the loose tiles removed, and the areas bare of tile prepared so that the deteriorated concrete can be fixed. Then, at that point the Silikal primer is installed. What that will do is to provide the bond to the existing floor as well as become the foundation for the rest of the Silikal installation.

Once the primer is installed, the coving begins to be run from the floor and up the wall which will eventually give it the wonderful appearance that coved flooring can bring to a professional kitchen installation. Then the colored product is put onto the floor, followed by the topcoat seal. As amazing as it may seem, Silikal will then completely set up and be ready for the early return of the breakfast crew, as Silikal only takes one trivial hour to cure on a floor before it can be returned to work, no matter what kind of work will be involved.

There will be no more slipping, sliding, or falling in that kitchen, and clean-up will be a breeze. There will also be no more tiles popping up, and no more citations for not having your kitchen floors clean. Possibly best yet, Silikal will remain on that floor possibly longer than the building around it will, that’s how permanent Silikal is. So, no matter what floor resurfacing you must do, be sure and look at Silikal, you’ll be so glad you did !

If you currently have a boat or a ship, then you know how important marine non skid coatings can be. Even the sailors who are in the Navy are more than aware that it only takes one wave to hit wrong and in the wetness you may find someone going overboard! Mariners are only too conscious too, that true anti slip marine deck coatings need to be extremely durable as they are out in the elements, and depending on the use of the boat or ship, some marine non skid coatings should be adjustable when purchased and installed.

Boaters wish for undeviating totally homogenous materials, they have had it with non marine deck treatments consisting of fillers such as rubber flecks, actual beads, decimated walnut shells, or even sand! Fillers, mariners have learned the hard way, fall out and the walnut shells or whatever are gone, and thus all that’s left is a very unsafe decking that is almost impossible to clean. In addition boaters desire marine non skid coatings to be totally non-toxic, with absolutely no volatile solvents. They also desire a one-coat application and they wish to be able to have the coating cure within 24 hours.

Those who need the product are probably shaking their heads, for there is a product that delivers all that and actually cures in only one hour, which certainly makes those who live aboard their boats or ships extremely happy. That product is of course Silikal.

Cruise ships, large shipping vessels, and boat hulls have all fully benefited from Silikal’s waterproof floor coverings. First it’s the fact that Silikal’s protection enables the boat to take the ultraviolet rays of the sun, and the rain, the moisture that comes up from splashing, as well as dew. Fitting a boat with Silikal’s waterproof boat floor will save any boat owner money, since repairs and premature replacements of everything on a boat is so expensive.

It really does not matter how small your boat is, or how large your ship is, you will definitely be able to benefit highly from Silikal’s marine non skid coatings, also known as boat floor covering. All ships and boats share the conditions that make them deteriorate faster, thus all ships and boats should actually share in the bounties of Silikal’s most durable flooring.

Strangely enough, it seems that any boater seems to have boat restoration in his or her blood. The very vision of saving an older boat and then being able to restore her to her earlier glory is an appealing and also a very romantic one. Should you have that vision, be sure and look into Silikal for your marine non skid coatings!

Mention the word institutional and many people automatically think of prisons and jails, and thus consider institutional floor finishes with bars attached. Strangely enough that view of institutional floor finishes is not far from reality. There are many institutions, including jails and prisons, which have benefited greatly from great floor finishes.

Your institutional needs may run into needing institutional floor finishes that can put up with the awful floor punishment of forklifts. Forklifts are about the worst thing that a floor has to deal with. First they are incredibly heavy, besides the increasingly heavy loads they carry around, and their large rubber wheels frequently leave scorch marks on the floor that they traverse upon. Forklift accidents are unfortunately very common, but one of the best things that a warehouse can do to avoid accidents including running into people, forklifts running into racks, columns, and even its own stored inventory is to make the warehouse cleaner and brighter. Warehouse lighting in general is rather poor as well as expensive to maintain but a bright floor color can do the job without continual costs.

One way to accomplish this is with a clean Silikal brightly colored floor. Institutional floor finishes can make a drab warehouse drabber in general as for some reason many warehouses think that their floor should be metal gray. Look at Silikal’s pictures of warehouses with light floors, and you can immediately spot the difference.

Perhaps you are considering institutional floor finishes because you have a meat packing plant. Such a plant will be very cold inside, and chances are that the final product is also kept at a frozen level. The location where the meat is cut and prepared will be slippery with grease and blood, thus that floor has to be completely slip resistant. Then too, inside the freezer sections of this plant, the floors there too must not be slippery and must be able to take the constant freezing temperature. Again, we have Silikal to the rescue, as it is the perfect answer to those two scenarios.

Suppose instead you are a hospital institution. Now it is superbly important for the floors to be scrupulously clean and in fact totally hygienic. Silikal is the perfect floor for a hospital as it is completely seamless as well as being non porous. Because of this factor, germs and bacteria have nothing to fasten onto. Nothing ever gets under a Silikal floor either! This makes them superbly easy to clean, and they are also completely resistant to stains, a fact that is important where iodine is frequently used, among other stain making liquids in a hospital.

No matter what your needs are for institutional floor finishes, Silikal has the perfect answer for you. Nothing beats Silikal!

The newest thing to hit floor tiles and flooring in general is liquid floor tiles. What happens with these is that walking on them moves colors around in the tiles. Perhaps put more poetically they actually create play as well as movements of light, which then stimulate the sensations of both atmosphere and nature. There are actually two different types of liquid floor tiles.

First to come out was the mono-chromatic liquid floor tiles. In effect these leave a retreating ray of various color tone rays within the memory traces of footprints left behind. What the bi-chromatic tiles do is to stimulate playing with colors as well as with forms of all kinds in an incessant and uninterrupted evolution.

As one walks, it comes as no surprise that the creators of these liquid floor tiles were obviously stirred by their memories of walking across green pastures or sandy beaches, which then left their marks directly upon nature in the form of their footprints. That particular feeling is just what the liquid floor tiles make you feel.

The liquid floor tiles are actually custom made, thus they can utilize any shape, any color combinations, and any size desired by the purchaser. The way that they are made is that they are actually filled with brightly colored, totally non-toxic liquids. This is what enables them to move and swirl in color when they are walked upon. Commercial usage such as bars, nightclubs, museums and even hotels where children gather have been the most common users of these tiles. Granted they are new, different, fun and very exciting at present.

Technically construction is rather simple, for it is 2 separate sheets of polycarbonate. The top of this tile has been treated so that it has anti-slip properties, and the bottom is actually used to act as shock-proofing. Then it is filled and encased in more polycarbonate. Each tile is about ¼” thick, and each of these tiles is individually tested before going out for use by having a 500 kg load for each square meter. Their reactions are best when applied at room.

As said these new liquid floor tiles are definitely new…thus the excitement of them will grow. It is obviously soft enough to leave foot “dents” into, and yet cannot be utilized where too much pressure will go upon it, and we have no idea how protective it will be to the concrete below it. Time will tell!

Various floor finishes do not come with a non-skid floor finish additive. These are added in by the operator or at the factory before the product is taken to your location. Thus if you desire a non skid floor finish additive you’d best bring it up to the person who comes to give you your estimate. Not all flooring companies will even ask you if this is a necessity for you, which is truly unfortunate.

On the other hand there are numerous additives that can get added very simply to paint. Whether or not this will deliver a true non-skid floor finish is debatable though. Read the warranty that comes with the product. Chances are they are not responsible if it fails for any reason. You might as well not even add it to their paint. Disclaimers abound when you add a non-skid floor finish additive. For instance I have found some disclaimers that say that it will actually reduce the lifespan of the product! Then there is a further warning, that definitely made my heart sink, stating that one needs to hold onto any leftover paint due to the need for periodic maintenance re-coating.

Then there are the companies who will sell you “play sand,” or silica sand, and some even utilize polypropylene beads. The last thing you will wish to utilize on your floor finish is play sand. It is very rough, and will skin the knee of anyone who happens to fall on it. In addition, play sand is much too abrasive, it will in fact shred off your flooring. There are some who will also sell you decimated walnut shells to mix into your floor finish. Commonly utilized though is pumice which is a volcanic product. All of these various techniques require sustained maintenance however as they will actually decrease the lifespan by wearing away the very product used to protect!

The very best product available though in a non-skid floor finish additive is Silikal. When you are seeking true non-skid products because it really counts, then you will find that Silikal has been utilized for it’s non-skid properties in military installations, air hangars, parking decks, restaurants and bakeries, hospitals and medical offices, schools, manufacturing plants, high rise buildings and a myriad of other places that knew that non skid properties in their floors was not to be passed over or denigrated!

Silikal is so serious about its non skid floor finish additive that it will actually offer degrees of non-skid to its flooring. Thus Silikal non-skid floors are actually designed to withstand all kinds of wear and tear and do this all without any warping, splitting or cracking or degenerating!

Any interior concrete is going to need an interior concrete floor sealer. The reason is that although concrete is hard, it’s actually rather delicate as hard things go. Interior concrete floors left unsealed will develop dust, and often have corners break off. In the worst case scenarios, cleaning plain old concrete gets old, and every time water is put on it, dirty water seeps through the concrete to make bigger problems eventually. There’s a saying that many people are taught in school about “the unexamined life is not worth living” said Socrates, but to paraphrase good old Socrates, I say that “the unsealed concrete floor is not worth having!”

The reasons are many why this is so. Putting down an interior concrete floor sealer will actually prolong its life, and will actually enhance as well as preserve its appearance too. There are of course hundreds of different floor sealers, some good, some bad, some just so-so and one superbly great one!

First, you’ll run into acrylic sealers, either water based ones, or solvent formulations. These work pretty well, and will definitely make your concrete beautiful and shiny for a while. That’s the catch – for a while. They will need to be specially maintained with more than a few coats of floor finish, or wax.

Next is the polyurethane interior concrete floor sealer. This is thicker than the simple acrylic sealer, thus has a higher resistance to chemicals as well as abrasion. Available in both solvent and water based types and generally they offer a range of sheen. Not for excellent resistance to chemicals nor abrasion though.

Now come epoxy sealers. These do produce an abrasion resistant finish, they are long-wearing and quite hard and do protect your concrete surface. Most of them are very water repellent. Unfortunately chances are that they will yellow if exposed to UV rays and shielding a flooring from UV is dependent on the space and exterior light access.

All sealers will not meet your current Federal and local regulations with regard to VOCs either. For example, xylene is a very common solvent frequently found in concrete sealers. It unfortunately produces VOC’s, or volatile organic compounds which can be harmful to elderly, immune deficient, and small pets.

Now we come to Silikal, yet another type of interior concrete floor sealer. First Silikal has absolutely no VOCs, ever. All of the Silikal products will deeply enrich the color intensity of the concrete if it was dyed or stained, or you may choose a seemingly unending choice of colors to bring incredible beauty to your floors. In return to making your floors superbly easy to maintain and clean, you will also be permanently blocking the penetration of stains, chemicals, grease, oil, and all manner of dirt. Neither water nor chlorides can intrude into your concrete either with Silikal. Protection against wear and any abrasion is a given, as Silikal floors outlast the buildings they are put into and they do not yellow!

Well, we all know the law of physics, Pascal’s principle, which tells us that water seeks its own level. Thus water that is at rest is at the same level as all the other water surrounding it. This is so because of the earth’s gravity. So, we were taught that the surface of the liquid is actually being exposed to atmospheric pressure, or put another way; it is reacting to the pressure of the immediate air being exerted on its surface.

Based on this need, those with uneven flooring might be heavily tempted to purchase one of those self-finishing interior floor toppings that theoretically creates its own underlayment. The goal of the product is to produce a smooth surface that is then completely ready for resilient flooring, or perhaps ceramic tile. Their “claim to fame” is that there is no troweling required.

The companies that sell this type of flooring resurfacer stringently proclaim that it is best to be used for brand new pre-cast slabs and concrete floors that have an unacceptable finish or that it is ideal for resurfacing any existing floors whose finishes have been damaged. That sounds thoroughly ideal until one looks deeper into the problem as well as the solution.

Now there are liquid floor leveling compounds that can be utilized on wooden floors, although many still believe that one should use furring strips on the joists. Because each joist will need different thicknesses and thus a different gradient of furring strip, this is definitely a very tricky job. Therefore, science has instead come up with a liquid floor-leveling compound that has fibers in it. The very fibers in it will enable you to use it on wooden floors.

After all is said and done though, one of the best liquid floor leveling compounds that can be found today is Silikal. And best yet, it can be utilized on all manner of flooring too! You see “regular” epoxies are polymer materials, which begin their life as liquids, but then a chemical reaction takes place and they convert into a solid polymer. In theory, this creates the most adhesive polymer possible, and its formulation can be heavily relied upon to make a completely non-porous and thoroughly seamless installation. Unfortunately this is not true of other epoxy products except Silikal, which utilizes “enhanced” MMA, which is methyl methacrylate. This product does create an impenetrable bond to the subflooring, is a floor-leveling compound, and is practically indestructible, therefore it creates a floor that will conceivably outlast the floor it is laid upon.

Back when MMA first came out for use as a liquid floor-leveling compound, unfortunately one of its problems was that it took ages to actually set. That meant that whatever business utilized it, had to shut completely down for at least 24 hours, sometime longer if the set up took longer to prepare. This then, created a problem for most businesses that cannot afford to lock their doors for this length of time. At last, along came Silikal, which utilizes “enhanced” MMA, and suddenly the whole floor-leveling world changed. Silikal, you see, will set up in one hour, and after that one hour, one can bring cars onto the surface and even forklifts and loads of foot traffic as it will be completely cured and ready for operation.

If there is one industrial floor corporation you need to know about it is Silikal. Believe it or not this corporation has been in the flooring business for over 55 years, and that’s over a half a century! First they were in screed construction. Now, unless you’re in the business you won’t know what that is. Screed construction is the use of some kind of top layer of sand and cement that goes on top of concrete, thus it forms some sort of flooring besides the concrete.

Since that humble beginning in screed, this industrial floor corporation began to create floor coatings that were based on synthetic resins. Now from then on, the corporation proceeded to accomplish countless development and research projects. Very proudly, Silikal is currently an industrial floor corporation across the world with specific representation in Europe, Asia and Australia with headquarters located in Germany and now the U.S. as well. They have a fabulous training center located in Mainhausen, Germany.

Of course, Silikal as makers of methacrylate resins became renowned in industrial and commercial surfaces, medical facilities as well as many public institutions. Even commerce and crafts began to ask for Silikal, and thus the industrial floor corporation grew by leaps and bounds.

Their product range today is phenomenal. They are the only company that deals with flooring that will cure so quickly that there is never any disruption of operations in any business, and even those who utilize forklifts can go right to work after the product cures for an hour. Each time Silikal lays a floor, it always receives the exact degree of required slip resistance. In addition, Silikal can be processed at extremely low temperatures, and businesses are thrilled to hear that they do not need to “apply, cure, reapply, cure, and reapply then cure!”

Even famous designers as well as architects are now specifically using Silikal floors due to the amazingly huge selection of colored design options. Silikal floors can mimic a tremendous range of rocks, and other amazing “trompe loeil” floor designs. You can even have imported Italian tile floors that are really Silikal concrete floors!

Silikal has been instrumental in creating a secret formula for its enhanced MMA, that was actually discovered by their own scientists. Their Silikal product can actually exceed the exceptionally strict LEED guidelines for environmental stewardship. Thus as an industrial floor corporation, they have good reason to be exceedingly proud of their corporation.

First in our search for concrete sealer non flammable, it is important to look at what a concrete sealer does and how it accomplishes its job. Any concrete sealer accomplishes its work by chemically bonding to the concrete until it has become part of the concrete’s internal structure. By doing so, it will increase the concrete’s specific resistance to mildew, algae, mold, moisture, alkalis and acids in general. It also helps protect that concrete in many ways, even against cold environments and frost. Some concrete sealers are so effective that they can even be utilized in curing wet and damp basements to prevent hydrostatic water from coming through the concrete. In addition a concrete sealer will halt such damage such as crumbling, pitting, spalling, efflorescence, and concrete dusting.

It is however, unfortunate that seeking concrete sealer non flammable may be like looking for a needle in a haystack. You see a great majority of concrete sealers are made of flammable materials. This is because they are not a solvent free product, and thus one can tell that they are full of solvents because the products release VOCs, which are also known as noxious fumes. VOC stands for Volatile Organic Compounds, but is shortened to VOCs in the industry. Some of these chemicals that make up VOCs actually emit gas known as off gassing, and they may have long-term or short-term adverse health effects on humans.

In searching through many products that are concrete sealers, one often finds products that speak of being non-flammable, yet in their advertising somewhere one finds the disclaimer that it is non-flammable as well as being low in odor. Something about such advertisements does not seem to settle well as there is a vast difference between no odor and low odor.

The point is that now one is seeking a concrete sealer non flammable in addition to one that is not full of compounds that will emit VOCs. Although I am aware of a tremendous amount of concrete sealers, the only one I am certain of that fits this particular “recipe” is Silikal. You see Silikal concrete sealers are totally non flammable because there is nothing in them that is capable of burning, and proof of that is that there are absolutely no VOCs in Silikal.

You will be happy to find that although Silikal is nonflammable, non-toxic and very environmentally friendly, which does not discharge any noxious fumes upon applicaton, the professional contractor will still follow strict procedures in order to perform the demanding work of concrete overlay. Any Silikal worker you will encounter has been extensively well trained, is courteous and extremely knowledgeable about the Silikal product.

99.9% of restaurant floors constructed today are surely made out of concrete, so when speaking of restaurant flooring, concrete figures predominantly in them. As to what goes on top of the concrete restaurant floors, now that’s the question that many restaurant owners need to face and question.

Some owners look at the restaurant floors concrete and envision being able to mix and match tiles with all manner of singular colors and thus being able to fashion appealing patterns on both the kitchen flooring and their restaurant flooring, The thing is that if a restaurant owner chooses tile, then they must make certain that each and every joint is properly sealed because grout can and will permit all manner of seepage and even allow food and other debris to lodge in those gaps between the tile. What happens next is that the grout begins to smell, and it changes color as well appearing dirty and filthy. There will also be dirty water seepage under the floor tiles, which will begin to pop out. Also, if not sealed, tile is incredibly slippery if either water or grease lands on it even if it is considered non-slip tile. Thus, if you see tiles in your mind’s eye, that’s fine but be sure and have Silikal seal the tiles so that you can rest assured they are properly sealed and will have slip resistance.

Other owners will see the restaurant floors concrete look and think that they need an older style appearance, and thus will want to put hardwood floors atop that concrete. The exact same scenario will happen with wood, as it needs to be properly sealed with Silikal in order to prevent water and grease seepage under that wood. Silikal not only does a perfect job at sealing, but it also brings out the natural beauty of the wood floor besides giving it a very eye-appealing polish.

Still other owners will look at the restaurant floors concrete look and envision stained concrete. Silikal can also do that, giving the floors in that restaurant exactly the “look” that the owners have envisioned for the perfect ambiance to take place. Be mindful that even stained concrete will need to have a concrete stain sealer applied. In addition to stained concrete, some owners have decided that they want the look of the floor to be stone or river rock flooring, some even opting for marble. “Real” marble of course is a terrible choice for a restaurant, as it stains so easily and is one of the most slippery of choices.

Silikal takes care of sealing all those, as well as creating a marble floor that only has the appearance of marble. Silikal is actually all those floors and more! With Silikal you can create the appearance you desire, as it is one of the greatest design elements available for restaurant flooring.

As we all know industrial resins & chemicals are now very widely utilized in order to enhance the actual performance as well as feats of today’s acrylic coatings technology. What’s interesting is that the very hardness and adhesion characteristics of acrylic polymers are what allow the amazing bonding to a miscellany of substrates. Combined with industrial resins & chemicals, acrylic resins have been able to replace the harsh chemical solvents that used to be in acrylic coatings. This has made great strides in being able to form and create environmentally friendly products.

Take the wonders of Silikal for instance. Industrial resins & chemicals have enabled the creation of Silikal flooring, which contains a number of startling attributes such as:

•Anti-corrosion properties
•Alkali-resistance
•Best storage stability
•Complete lack of VOCs
•Excellent gloss, finish and clarity
•Fastest curing possible
•Good quality, first-rate adhesion to non-porous as well as porous surfaces
•Improved pour of product
•Improved solubility
•Superior hardness
•Superb weatherability

There are all manner of different resins that have been developed in order to create water as well as corrosion resistance, gloss, adhesion and of course hardness. What has been developed is a modifier for both the alkyd and epoxy air-dry coatings. These coatings themselves were actually designed to improve the water resistance, gloss, adhesion as well as hardness that they are applied to.

So many chemicals have made our lives so much easier. For example take fully flexible (elastometric) waterproof decking systems that are utilized in highly exposed areas to create totally waterproof traffic bearing as well as walking areas.

We are all thankful for the industrial resins & chemicals that have created Silikal floors that will last longer than the building they are installed in. Silikal is so waterproof that it has been utilized as glass to hold back millions of tons of water in huge aquariums. Silikal flooring can prevent freeze-thaw damage in the worst weather conditions possible on earth, yet is the same Silikal that can be introduced to flooring no matter the weather.

Keep in mind too that industrial resins & chemicals are what have allowed Silikal to be installed anywhere, and in one short hour the floor can be driven upon even with forklifts. Only Silikal cures that fast, and that completely. In addition, the Silikal flooring can be completely stain resistant, which makes Silikal so much in demand for healthcare flooring where blood, iodine and other stains can happen, as in hospitals.

There are of course large companies in the United States where one may shop for same, and in that instance companies such as Home Depot would be said to be the floor coating system supplier. However if you are a company who is seeking substantially more expertise from your supplier, we cannot discourage you one bit away from those handyman locales.

You are seeking a floor coating system supplier who has the industry experience to accomplish what you wish, and you want this supplier to not only be exceedingly knowledgeable about the product he represents, but he must also know all about the product quality so that he can actually meet your demands regarding a resinous flooring system. Some people would say that they are not interested in a sales pitch, but you definitely agree that whoever provides a true variety of fully durable, yet flexible flooring solutions for your particular highly unique applications should become the floor coating system supplier for your company.

Well, many will come and present their wares. Indeed many will come, but few will ever be chosen? That is part of our free enterprise system, don’t you know? Your particular floor coating system supplier should be able to handle all decorative, institutional and industrial needs, and thus be able to offer specific polymer flooring as well as coating needs to your company thus providing an assortment of flexible, yet durable solutions for a huge variety of tremendously unique applications. The point is that your floor coating system supplier should be able to provide you with solutions that are truly based on your specifications that include: conductivity, thermal shock resistance, its impact as well as its wear resistance, and of course even its chemical resistance. Finally such a supplier should be able to answer direct questions even about the moisture vapor tolerance of such a floor, but then there is also being ultra cognizant of such things as color and the final appearance of your flooring.

In essence a good floor coating system supplier should be able to not only answer all the questions you may have on the subjects above, but needs to also be able to ascertain your needs on his own even. This is partly why Silikal is considered the foremost floor coating system supplier in the entire world. Their people know and understand Silikal with a deep dedication that shows the moment you contact that supplier. You will not do better than with Silikal, we guarantee it.

There are some floors that absolutely need to be in a no slip condition. Examples might include a butcher shop, a dentist office, a hospital, public showers, bathrooms, auditoriums, kennels, actually the list is totally endless, as to how many businesses and commercial establishments need a slip resistant flooring system.

No slip condition is also a theory of engineering or fluid dynamics. It relates to viscous fluids and boundaries thus limiting how much particles can move. Further along with these studies are insurance studies that have recommended that due to the American Disabilities Act (called the ADA) walkways, ramps, and flooring in the food and beverage industry must have a friction level of .60 or more for flat spaces and .80 should the floor be ramped.

OSHA has not gone quite as far, and required that floors should actually have a friction level of .50 OSHA is of course the Federal Agency called the Occupational Safety and Health Administration whose job it is, is to oversee and enforce safety and heath legislation here in the United States. There are even slip meters, which will allow someone to perform the static coefficient of measuring friction.

Silikal the world’s leader of concrete sealer flooring has delved deeply into the no slip condition, and in fact everyday their scientists are working on this problem, ascertaining that the Silikal product not only adheres fully to OSHA standards, but also surpasses them highly. It is important for anyone seeking no slip flooring to know and understand that the Silikal non-slip flooring is actually one of a kind. Above all Silikal installers are very adept at matching the non-skid coats to the floors, knowing exactly what to do when it is needed for extreme non-slips, as opposed to mild non-slips.

It is often said in the non-slip business, that Silikal is the only name that one should trust if an establishment wishes to completely avoid hazardous slip and fall accidents. Other businesses, property owners, architects, builders, and building managers have relied on Silikal for years to meet their full legal obligations to ensure that the floor surfaces that employees and the general public utilize are fully non-slip. Over and over again, courts have upheld that Silikal non-slip flooring offers the maximum protection against injuries that come from slip and falls.

If you are among those listed above, builders, building managers, etc. who feel that their businesses deserve the same high durability protection that will halt costly litigations that arise from injuries, then be sure to call on Silikal flooring. Silikal can offer peace of mind besides beautiful flooring!

Anywhere one enters a building we often see floors that are not quite as flat as the builder may have wanted them. Or, the various hills and valleys of a floor may simply be due to the building having settled ever so slightly, or it may indicate bigger problems. Utilizing a self leveling floor compound is best for leveling bumpy concrete floors or even wood floors that may be no longer level due to the floor joists having flexed or twisted in time. These modern self-leveling compounds are superlative for smoothing out the various dips encountered in either a concrete floor or even a wood subfloor.