All Ford Mustang Classifieds

Airaid Intake & SCT XCAL3 Tuner

mcarta@graysonauto.com — Fri, 10 Jul 2009 12:07:40 +0100

Posted by: TheCurrent

Description: Airaid Cold Air Intake, used for about 3000 miles. Has everything you see in the pic. $175 shipped SCT XCAL3 (p/n 3000) with 89 performance, 93 race tune, and 93 torque tune. Calibrated to the latest ford strategy TSG1. UNLOCKED $275

Price: $400.00

wanted transmission

lazerdms@gmail.com — Fri, 10 Jul 2009 11:34:11 +0100

Posted by: lazerdms

Description: I am looking for a 5speed with a 1.94 2nd gear

2005-09 Mustang V6 MAC Axle Back Exhaust (2) Mufflers

catonetony@gmail.com — Fri, 10 Jul 2009 05:03:36 +0100

Posted by: Torpedo

Description: Hey guys, Selling a pair of MAC Axle-back Powerflo Mufflers for the price of one. Drivers side has never been installed and passengers side has about 50 miles on it. Very loud and deep tone that makes your chest vibrate. Stainless steel with 4" tips. Good for a dual exhaust upgrade, or dual conversion if you already have your own midpipes. Or if you just want to try out a single and keep your options open to upgrade. The cheapest place online is $179 for just one. Buyer is responsible for shipping, but even with shipping costs it would still be a good deal, although I'd prefer to deliver them in person to someone in the area. Good luck!

Price: $179.00

2005 v6 mustang auto tranny swap

Dirtyharryracing1@gmail.com — Fri, 10 Jul 2009 00:23:38 +0100

Posted by: Nick_Adam

Description: Hi everyone I am Taking all of my Automatic parts off of my mustang From the tranny to the engien bay wireing harness to the E.C.U. Yes even the drive shaft.. In this you will get everything you need to fully swap your manual to a auto... I will take offers on the indavidual parts And my take them... I am not super firm on the price but I do know what I want for the whole thing or each part. Everything is Used but in good shap I just changed the fulid and fliter on the tranny 1k ago.. Thank you very much

Price: $2500.00

07 Mustang GT Water Pump Pulley

drew30250@hotmail.com — Fri, 10 Jul 2009 00:04:51 +0100

Posted by: Mustngman4.607

Description: OEM, Stock Water Pump Pulley off of 07 Mustang GT.

Price: $25.00

04 cobra for a 92 gt plus cash

kmfontaf69@comcast.net — Thu, 09 Jul 2009 23:44:44 +0100

Posted by: thefixtureman

Description: looking for a low mileage somewhat stock 04 cobra. what i have is a 92 gt in mint condition stock with 45k. single owner always in garage never seen snow. plus some cash of cource

1995 Mustang GT, Rebuilt 306, 5-Speed. Trickflow H/C/I, With other Aftermarket parts, Clean!!

behay20@msn.com — Thu, 09 Jul 2009 15:15:51 +0100

Posted by: uhoh5O

Description: 1995 Mustang GT, 302 5.0 engine with tons of aftermarket parts!! Zero Rust, never driven in the winter 85,000 Miles ( 2,500 On rebuilt Engine) Specifics: -Rebuilt 302 engine, Bored to 306 with Speed-Pro forged pistons and new rings, new bearings all throughout the engine (2,500 miles on rebuilt) no noises and no oil consumption, Runs like a Top!! All painted, no rust -Trickflow Twisted Wedge Aluminum Performance Cylinder heads ( Rebuilt 2,500 miles ago) New valves, springs, grind, and pressure check by a engine shop -Trickflow Stage 1 Camshaft with 1.6 Roller Rockers ( New pushrods and Lifters) -Trickflow Trackheat upper and lower intake manifold ( polished) - Richmand 3:73 Gears in the Rearend - New Ford Racing King Cobra Cluth and Pressure Plate( Replaced on engine rebuild) -Ford 75MM throttle Body with chrome cold air intake. -Kirban Adjustable fuel pressure regulator with Ford 40 lb/hr fuel injectors and 255lb/hr intake fuel pump -Full Exhaust, (Unequal aftermarket headers, Off-road X pipe, Full Stainless Magnaflow catback) Sounds mean - Steeda Tri-Ax Short throw shifter -Under Drive Pullies -Chrome Radiator pipes - Taylor Ignition Wires - Chrome Ford Racing Cobra R 17'' Rims - Newer Ceramic brake pads and new rotors all the way around -Brand new tires ( Less than 100 Miles) I couldnt sell it with worn tires - Stock Ford Mach 460 Permium Sound System Black exterior Paint 9 out of 10 Tan Leather Interior 9 out of 10 17'' Chrome Ford Cobra R Wheels 9 out of 10 * This car is extremely clean, and was always very well taken care of. If you research there is probably $5,000 of aftermarket parts and work done to the motor. The car has been very well taken care of and no expense was spared when any sort of maintenance was done on it. The car was never beat on, and always driven respectfully and suprisingly does not too terrible on gas for a daily driver. - I did bring it to the racetrack for ONE run after the rebuild, because i was curious how well it would do. I ran 12.65 @110, with bad traction. Price is $8000 obo Or trade for a 2005 jeep grand cherokee cash Contact Email @behay20@msn.com or @ (920) 450-1472 Thanks- Brian

Price: $8000.00

shelbyhertz66 and 2006 shelby gth

cotepoultry@rogers.com — Thu, 09 Jul 2009 13:15:23 +0100

Posted by: cobra1998black

Description: 1966 shelby gt350h car #822 from larkin ford ny to hertz new-york air-port and my shelby hertz gt h car #341 from tampa florida rental would like to sell as package deal but would split great fit to any garage , my 66 has been restored 3 years ago and have documented the 7 year resto the 2006 has 20thousand miles and was well taken care a very good car i would be interested in part trades towards my cars considered (67 gt500's ,boss's) thanks paul

Price: $174000.00

1986 Mustang GT 347

wcdvr@aol.com — Thu, 09 Jul 2009 12:34:23 +0100

Posted by: Pro Mod Notch

Description: I have a 1986 Mustang GT that has a 347 dynoed at 488 hp. This car has not seen the strip or street. It is 99% finished. The engine was built by Joes Performance in Ft. Myers, Fla. It has a Lunati VooDoo cam, the largest made in the series, Eagle rotating assembly, Rousch Racing Heads, high rise intake with wet nitrous port, complete assembly is balanced. New oil filter relocater.It also has an MSD Billet Distributor and MSD 6AL box( will come with several pills), oil catch can, line lock, new calipers, hoses and brakes. New sway bar bushings. Stage 2 Clutch. Battery mounted behind drivers seat. APC reclineable racing seats. A/C, yep A/C. needs to finish the wiring on it. The rear is an 8.8, thoroughly gone through and rebuilt with 4:10 gears by a local speed shop in Ft. Myers. New upper and lower tube control arms with eurethane bushings(greasable). This car is streetable, all lights, wipers and signals work fine. This car has ONLY IDLED in the driveway and still has the break in oil. The reason for selling this car is in March I had low back surgery that at this point has not gone so well and I have come to the conclusion that I will not be able to finish it or enjoy it. I have a lot of time and money in this car. I am willing to accept a partial trade, what I am looking for is a car that rides more comfortable than what a mustang does. I have a 93 4 cylinder sunroof mustang I am getting rid of also. Everything on it works except a/c. It needs the IRCU on the right strut. I can be reached at 239-895-4916 if you want to know more, there is more to the 86 that I haven't yet described so give me a call.

Price: $10000.00

94-98 cobra hood (stock)

wicked5liter@yahoo.com — Wed, 08 Jul 2009 23:51:34 +0100

Posted by: wicked5liter

Description: 1994-98 stock cobra hood,i was told this hood was never bolted on a car.it is in primer,and i do not have the scoop inserts,asking 150.00 o.b.o.

Price: $150.00

2001 v6 mustang very clean, lots of extras!!

homerun2591@yahoo.com — Wed, 08 Jul 2009 23:28:54 +0100

Posted by: burtonboarder14

Description: 2001 v6 mustang runs great!! automatic 83,000 miles *non-smoker* car is very clean and it get compliments everywhere i go! car comes with: upgraded racing pedals blue racing stripes brand new head lights new pioneer stereo loud true dual flowmaster exhaust with custom bumper cutout ( looks like GT bumper) tail light decal rear bumper decal white guages, glow blue custom blue calipers interior is a two tone charcol and gray color which looks very good has traction control ( a must for winter and helps a lot in the rain) abs cruise control new shifter cable new rotors/ brake pads new sparkplugs and spark plug wires new fuel filter new trunk struts oil changed every 3,000 miles or less well maintained and taken care of im sure theres some more things i have done to it but cant remember Garage Kept! Clean Carfax report Just passed emissions if you buy it i will detail the car for you which includes wash, buff, and interrior cleaning. i just did an oil change on the car today has syntetic mobil one! i have put a lot of time an money into this car as you can see, if you have any questions feel free to ask email me at homerun2591@yahoo.com or call 847-542-1153 and ask for chris rims are not included. i have a stock pair of rims with tires that will be included

Price: $7500.00

99-04 mustang saleen body kit, rear bumper and side skirts

homerun2591@yahoo.com — Wed, 08 Jul 2009 23:18:52 +0100

Posted by: burtonboarder14

Description: i have a aftermarket fiberglass saleen rear bumper and side skirts im asking $150 o.b.o for sideskirts and $275 o.b.o for rear bumper. both are brand new unopened. includes metal mesh. bumper does not say saleen on it. if intererested email me at homerun2591@yahoo.com chicagoland pick up only, i will concider shipping out sideskirts if you arrange everything and pay for it but i will not ship out the rear bumper. thanks

Price: $150.00

Corsa Sport Axlebacks for 05-09 S197

jasonnp@gmail.com — Wed, 08 Jul 2009 16:37:41 +0100

Posted by: Starfire

Description: Selling a set of Corsa Axlebacks. In great condition, there are a few minor marrs on the tips that could be polished out but don't show when installed anyway. I also put a fresh coat of flat black textured paint on them, this way the disappear under the car better. Also shipping is included in the asking price, if you want to pick up local that's fine also and will be reflected in the price. Thanks!

Price: $500.00

FS: Ford Racing Mustang GT 4.10 Gears for 8.8" Rear End

westsiderkg@hotmail.com — Wed, 08 Jul 2009 13:51:38 +0100

Posted by: westsiderkg

Description: For sale Ford Racing Mustang GT 4.10 Gears for 8.8" Rear End. Should fit all Ford rear ends, 8.8 inch. Will fit all Mustangs with the exception of V6 models. Used for 2500 miles, then swapped out for 3.55�s. Paid $200 plus shipped originally. Asking $100 plus shipping. Sold as is on first come, first serve basis. Paypal preferred. e-mail: westsiderkg@hotmail.com

65 mustang rebuidable or for parts $3000 obo

ericduncan8601@yahoo.com — Wed, 08 Jul 2009 04:44:44 +0100

Posted by: black65

Description: I have a 65 mustang that can be used as a parts car or rebuilt. I bought it and decided I have no need for it at this time. It does have a clean title. If you want any more pics just let me know and I can take some more. I can deliver, depending on where it is and how much your willing to pay to get it there. There is a 9 inch rear end that goes with it, if it sells for my asking price. It came out of 68 mustand gt, and it's 5 lug. Everything is as is. The motor that was in the car was a straight six. Motor is at a machine shop and doesn't run but can be picked up if you want it. Also a bunch of radom parts come with it too. I can be reached at 573-289-1521 eric

Price: $3000.00

87-93 5 speed pedal assembly

kevkel50@yahoo.com — Wed, 08 Jul 2009 04:19:46 +0100

Posted by: kevkel33

Description: flexible on the price so make me an offer. Perfect condition 5 speed pedal assembly out of a 1992 lx hatch 5.0 Trying to get $100 plus shipping OBO. You can look me up on legacygt.com under the user name kevkel33leg05 and see my current 15+ Positive Itraders. Link to my Itrader page: http://legacygt.com/forums/itrader.php?u=21038 Both my user names are in the photos. I'm located in 12575 NY Right by Stewart International Airport. Would love to do a local deal but will ship. Verified Paypal address: kevkel50@yahoo.com

Price: $100.00

For Sale 70 Grande Mustang

torino429@aol.com — Wed, 08 Jul 2009 00:46:00 +0100

Posted by: greentorino

Description: 1970 Grande Mustang. 302, Auto, Power steering, AIR, not on car but have everything to put back on. Car is from Georgia. I am selling this for my uncle he lives in West Virgina thats where the car is, south of Morgantown. $4400 or best offer.

Price: $4400.00

94 mustang gt, stock headers and h pipe with cats

pickplaya09@hotmail.com — Tue, 07 Jul 2009 23:37:30 +0100

Posted by: First5.0

Description: I have a stock h pipe with cats and stock shorty headers off of a 94 gt, had about 85-86k miles on the exhaust when i took it off. There is no leaks or anything, just swapped out for an o/r h and bbk equal lengths. Make me an offer, just looking to get rid of them without giving them out for free... :) Thanks

Price: $150.00

mach 1 hood and shaker

eddyroxx_@hotmail.com — Tue, 07 Jul 2009 21:17:14 +0100

Posted by: eddyroxx

Description: oem mach 1 hood and shaker kit have brackets for gt prefer local pick up

Price: $500.00

Straight six drive train from a 1965 mustang with auto trans.

forgeymatt825@aol.com — Tue, 07 Jul 2009 20:33:17 +0100

Posted by: 65EFI

Description: The engine still runs but needs some TLC. The trans and rear-end need rebuilt. I am just trying to make sure these classic parts don�t end up in the scrap yard. They are perfect for someone who wants to build there car as a restoration.

coolingmist wet X system

mrjimmy@rocketmail.com — Tue, 07 Jul 2009 20:08:23 +0100

Posted by: mrjimmy

Description: coolingmist standard trunk mount wet x system. Boost operated switch on pump. Used very little,less than 1/2 gallon.All wires and tubes comes with it. initially used on 4.0 with xcharger.

Price: $175.00

99 mustang convertible

Kool_Dude_0069@yahoo.com — Tue, 07 Jul 2009 16:51:25 +0100

Posted by: Kool_Dude

Description: 99 mustang ,3.8 V6 ,103,000 miles, New paint ,Roush package ,Cobra wheels ,styling bar ,glass hood, many other add ons will consider all reasonable offers! MUST SELL!!!!!!!

Price: $7500.00

2000 Mustang GT W/ Bolt Ons.

drumahfoo@hotmail.com — Tue, 07 Jul 2009 02:14:28 +0100

Posted by: mathos302

Description: Im selling by baby.. a 2000 Stang GT. 281 Mod, SOHC. Silver. Leather, Mach sound, Automatic, custom stereo. It has a new SLP LoudMouth 1 exahust. 3.73's and K&N Filter. Runs awesome, you can test drive it, and check it with a mechanic if you wish. Clean Tittle, and oil changed every 3500 miles. If you have any questions, just mail me, ill be willing to answer whatever. No trades, i need the money :/

Price: $6500.00

I am looking for a single roll bar or light bar for a 1992 Convertable street car.

sharrisbham@hotmail.com — Tue, 07 Jul 2009 00:38:56 +0100

Posted by: sharrisbham

Description: Looking for a roll bar or light bar made for a 1992 Mustang Convertable. Must be in good condition.

86 notchback for sale

j_m_mccoy@yahoo.com — Mon, 06 Jul 2009 21:29:18 +0100

Posted by: lilduececoupe77

Description: I am selling my 86 notch that I bought as a project car, i have recently bought another mustang and 2 broncos so this car must go. I am leaving my phone number on here for any interested parties, keep in mind this is a project car so it is not a running vehichle but with minor work it can be, and it is a very solid notch with no damage to the torque boxes. I will be happy to give all info on the car and what is included, gimme a call at 870 351 5916 and ill be happy to negotiate.

Snap-On Mustang Limited Ed Roll Cab and Top Chest

trish39@embarqmail.com — Mon, 06 Jul 2009 20:24:10 +0100

Posted by: rebpurdham

Description: 40th Anniversary Special Limited Edition Snap-on Roll Cab and Top Chest. 54" wide/60" high with coasters. Brand new condition/never used, complete with liners -BEAUTIFUL! A must have for the true FORD enthusiast! Valued at over $12,000. Will take $7000/obo. Delivery negotiable.

Price: $7000.00

1994 Ford Mustang SVT Cobra

Linda.cooper@house.ga.gov — Mon, 06 Jul 2009 18:17:38 +0100

Posted by: lakecar

Description: 1194 all black mustang Cobra coupe w/dark gray/and l ght gary interior. 5 speed transmission 56,000 miles. One owner, great condition, all papers on car.

Price: $11000.00

2 Mickey Thompson 26x11.5x17 ET Streets

wcflaherty@hotmail.com — Mon, 06 Jul 2009 17:47:08 +0100

Posted by: Zinc01

Description: In pretty good shape, a couple hundred miles, no passes and no burnouts on them. Still have the tread lines in them. I bought these right at the end of last year to replace the last pair. These are blems that I bought new for $300. A blem means they're marked on the sidewall. Hasn't affected the performance of them. I mounted them up last week to make sure they would still hook, since they've been sitting for a few months. Took them for a drive and they hooked way better than my current 315/35/17 BFG drag radials (came with the new rims). $150 + shipping.

Price: $150.00

Tremec TKO 600 w/ bellhousing, clutch, flywheel

erict70445@gmail.com — Mon, 06 Jul 2009 12:43:35 +0100

Posted by: erict70445

Description: TKO 600 with bellhousing, Ram HD Powergrip clutch, stock flywheel, and McLeod Hydraulic slave cylinder. Tranny and clutch barely broke in, less than 1000 miles. Everything in perfect shape.

Price: $2000.00

SCT x3/sf3 tuner for SALE!!!!!!!!!

outlaw350@att.net — Mon, 06 Jul 2009 02:06:12 +0100

Posted by: outlaw351

Description: I have 1 new in box SCT sf3/x3 tuner for sale! i paid 379.99 plus tax&shipping but am willing to let go for 285.00 first ill take it gets it! i have paypal or you can send money order. thanks

Price: $285.00

2007 Mustang GT Premium Coupe Shaker 1000 Auto

coppamilano@yahoo.com — Mon, 06 Jul 2009 01:10:09 +0100

Posted by: coppamilano

Description: 2007 Ford Mustang GT Premium Coupe, Auto, Shaker 1000 Stereo, Racing Stripes, Chrome Wheels, Leather, and much more! This Mustang looks amazing and drives like new! Still under factory warranty. Priced to sell fast!! Please email or call me with any further questions.

Price: $19900.00

1927 Ford Model T

beatlepath@yahoo.com — Sun, 05 Jul 2009 20:43:49 +0100

Posted by: Patstang

Description: Beautiful '27 5-door coupe. Original metal body, '80 Corvette 350 motor, 9" rear end, '74 Z- 28 TH 400 w/ B & M shifter, new tires ( 185/14 frnt,255/15 back, '02 Mustang black leather seats. Detailed documentation & photos in all phases of 3 yr. restoration. Engine mileage unknown due to previous rebuild. Stainless valves,ceramic headers, new crank & bearings, new hydraulic lifters,new timing chain, new oil pump, fresh rings & pistons, EDL-1403 500 CFM carb, 4-wheel discs Advertising for friend. It's got a nice, lumpy cam, great suspension, & glass pack exhaust. I tried to pass him with my '06 GT. "Tried", being the key word. He recently bought an '08 Bullitt; doesn't want both.

Price: $26000.00

1990 Mustang GT for sale in Sault Ste Marie, Ontario

wildswing@shaw.ca — Sun, 05 Jul 2009 19:37:19 +0100

Posted by: wildswing

Description: FOR SALE: 1990 Mustang GT (25th Anniversary) Asking $4,600 CAD ($4000 USD) As-is, where-is. [IMG]http://i29.photobucket.com/albums/c275/wildswing/Mustang/90MustangGT003Small-1.jpg[/IMG] Located in Sault Ste Marie, Ontario. Where's that? Click the pic... [URL=http://s29.photobucket.com/albums/c275/wildswing/Mustang/?action=view&current=SaultSteMarieMap.jpg][IMG]http://i29.photobucket.com/albums/c275/wildswing/Mustang/th_SaultSteMarieMap.jpg[/IMG][/URL] Purchased in Michigan Sept/05. All major modifications done by previous owner. Unfortunately he was not much of a gear head so he did not keep receipts or spec sheets. (?) mark those mystery parts & specs. Under 173k miles on chassis est. based on CarFax report (5 digit odo). Less than 20k miles on rebuilt engine and rear end (?). I bought it with a little over 157k showing. Not perfect but works fine where it counts. Runs strong. Has been my daily driver for the last 3 summers. Driven to London ON, Flint, Traverse City without any issues. Been reliable and a lot of fun. Hate to let it go, but other priorities are getting in the way. Lots of pictures and a video posted on my Photobucket site� [url=http://s29.photobucket.com/albums/c275/wildswing/Mustang/?albumview=grid]Link to Pictures[/url] [url=http://s29.photobucket.com/player.swf?file=http://vid29.photobucket.com/albums/c275/wildswing/Mustang/Video/Dyno.flv&fs=1&os=1&ap=1]Link to dyno tune video[/url] [B]Details:[/B] * 5.0L (bored .30 over - not original engine (?) * Original owner said engine was built ready for nitrous or blower (?). More on that later. * Edelbrock Performer RPM intake. * Edelbrock Performer heads - casting number is in the pics - Edelbrock tech cannot confirm but suspect they are 2.02 intake. * Crane 1.6 Energizer roller rockers. * Aftermarket cam (?) - suspect Edelbrock, fairly lumpy, she bucks under 2k rpm. * 24 lb injectors. * stock fuel pump (?) * Dyno tuned at [url=http://www.alternativeauto.com/]Alternative Auto[/url] on regular gas for drivability. Original owner had installed an "Air Adjuster" between MAS and harness to fool the EEC. Did not run as well as I liked. Lidio (tuner), at Alternative, was surprised, even with regular gas that he could not get more hp considering the top end parts and sound of cam. Agreed with suspicion of dished pistons (supported by previous owners comment about it being nitrous or blower ready). Previous owner provided his own dyno sheet showing more hp (incl in pics) but that was with large diameter exhaust, and done on a different dyno. * FMS polished valve covers. I added a baffle to drivers side to stop oil from soaking breather. * BBK 70 mm TB. * Stock MAS. * Summit aluminum rad (universal). * 180 degree stat. * FRPP AC delete kit (replaced original home made version that broke) * Cold air kit. * MSD distributor & FRPP wires & new plugs. * Accel coil. * Long tube headers & custom, fully welded exhaust with resonators, crossover & Flowmasters. Replaced what I bought the car with from headers back. * Mastercraft battery 1 yr old. * T5 with Hurst shifter. * Aluminum driveshaft. * 8.8 limited slip rear with 3.55 gears. * 5 bolt conversion (still uses fox spindles & brakes). * Cervini cowl hood with hood pins. Pins are not located perfectly but they work fine. I added a safety latch. * Polished stainless "Mustang GT" lettering on rear valence. * Polished aluminum American Eagle Alloy rims. * 245/45 R17 General Exclaim UHP tires with lots of rubber left. Bought last summer. * 2 x 1/4" Ford steering rack limiters on each side (to prevent further wheel rub). * Pioneer CD player MP3 capable. New pioneer speakers. 2-way in doors, 3-way in back. Nothing special (aka Wal-Mart special) but it works. * White face dash gauge overlay. U.S. car so speedometer is in MPH with small KPH. [B]Extras that come with the car:[/B] * Air pump bought from GTAMC member but never used. * Fan shroud and overflow also bought from GTAMC member but never used. One overflow mounting ear broken. * OEM '90 Ford Mustang repair manuals. * 5 bolt donut spare w/ non oem jack & handle & can of fix-a-flat * Header gaskets & bolts * Extra center cap for rims [B]What's wrong with the car:[/B] * Minor oil leak from front of engine, possibly timing cover/pan gasket. Few drops under the car overnight (found on clean cardboard in the morning). Have kept my eye on it. Not serious enough for me to worry about. Keep oil topped up and changed every fall before storage. 20W50 & Ford FL-1 filter * Minor (& occasional) coolant leak. Again, found on cardboard left under car overnight. Not always there. Since there's no overflow, I've kept it topped up anyway. * Interior lights, incl map light, don't work. * Rarely the power windows, if rolled all the way down, won't come back up right away. Don't know cause because very time when I've tried to troubleshoot, it would come back up. Tired of chasing my tail. Solved by leaving a little bit of window sticking up from door. * Power door lock solenoids missing but all wiring is there. * Slight rub on inside of a couple of the wheels from before I added the rack limiters. They hold air just fine. * Not correct rad for Fox but works well. No overflow. I top it up once in a while when I remember. Rarely gets over the M in "normal". Does not overheat, however it proved it's capable of overheating when it tossed the belt a few years back when original home-made AC delete bracket broke. * Front outboard passenger side valve cover bolt hole in head is stripped. Does not leak. * PCV valve weeps oil from around grommet. Needs a baffle. * Driver side O2 sensor missing. EEC tuned in open loop anyway so not required. After getting home from Alternative, I found out that the tech at alternative removed the sensor but did not replace it. Excuse was it must have broken off. Dangling connector ended up melting against header. It's now tie wrapped under the hood * Most significant rust is bottom of driver's foot box. Some very small bubbles on hatch. Otherwise very clean. * Crack in passenger side of rear valence and passenger side of front air dam * Lots of little paint chips, some peeling spots and some paint cracking on nose of hood and rear valance. * Missing some interior trim and all rear compartment carpet * Transmission speedometer gear is still oem (for 3.27 gears best guess). With the 3.55 gears, the speedometer reads about 14% fast according to trip odometer & I-75 mile markers. * No rear quad shocks. I assume because they would not fit with current wheel width & offset. * Limited slip still works, but could do with a refresh. Can still deposit 2 blacks marks when required [B]So why haven't I fixed all this stuff?[/B] Shouldn't be too hard, right? I bought the car for the sole purpose of driving it for a few summers (it's never seen snow as long as I've owned it) then parting it out, keeping the important parts for a [url=http://www.factoryfive.com/rdsterhome.html]Factory Five Roadster[/url] (Shelby cobra replica) build. I have maintained the car as required to get me to that point, without adding unnecessary cost but not abusing it either. Thus, I have not put much effort into the things that the FFR would not need, like cosmetics. All my attention has been on maintaining the eventual donor parts. Having mystery parts in the engine has not been an issue, since it runs well and reliably. The plan was to inspect those things when I did the teardown. The slight leaks have not been an issue. You'll see the wet pan in the pics. I add about 1/2 quart of oil a month. [B]Why am I selling?[/B] Unfortunately, real life keeps getting in the way. The Cobra project won't start for at least another 2 years, so the car is worth more to me now as a complete sale then what I can part it out for now and some parts in the corner of the garage saved for later. The market for the leftovers is not very good here in the Soo and shipping charges to larger markets makes selling bigger parts long distance difficult. The reasonable choice is to sell as-is to someone who can either restore and enjoy it or an FFR builder who can benefit from the work already done and part it out more easily. [B]For U.S. buyers:[/B] The car was manufactured in the US, for the US market and originally titled and sold in the US. That should help with repatriating it back into the US. I think I still have most of the original paperwork that I used to import it into Canada, including carfax and it's previous Michigan title. Please check with USCBP [url=http://help.cbp.gov/cgi-bin/customs.cfg/php/enduser/std_alp.php?p_sid=tyCyd4Bj&p_lva=&p_li=&p_accessibility=0&p_redirect=&p_page=1&p_cv=&p_pv=&p_prods=0&p_cats=0&p_hidden_prods=&p_search_text=import car&prod_lvl1=0&cat_lvl1=0&p_new_search=1]specific details on importing a used car.[/url] [B]For those looking for an FFR donor:[/B] I doubt you can find a better donor? That's why I bought it. Good enough shape to use as a daily donor while I waited to order the kit. Yes, $4.6 CAD ($4k USD) is a lot for a donor, but think about what you're getting. Rebuilt strong engine, 5 bolt conversion, 3.55 gears. Lots of good parts that you can sell to make up for the purchase price. Contact me by PM, email or call 705-946-4955 and ask for Mark

Price: $4000.00

LOOKING FOR A 90-93 CRIMSON RED GREY BOTTOM HATCHBACK

ptlcip@optonline.net — Sun, 05 Jul 2009 19:31:37 +0100

Posted by: ptlcip

Description: I AM LOOKING FOR A MOSTLY STOCK CRIMSON RED GREY BOTTOM 90-93 HATCH 5 SPEED NO MAJOR PROJECTS PLEASE, SLIGHT MODS ARE OK

Saleen 20" wheels with Toyo tires

kmeamf@yahoo.com — Sun, 05 Jul 2009 19:18:49 +0100

Posted by: big3lover

Description: 20/9 Saleen chrome seven spoke wheels with Toyo Proxes4 tires. Two tires are new and the other two have a couple thou left and all tires were siped.Wheels are in great condition one of them has a little curb rash.These wheels retail from Saleen for $350.00 a piece. I am willing to ship anywhere in US only if you pay shipping.

Price: $1800.00

Light bar for 2005-2009 Mustang convertible

kmeamf@yahoo.com — Sun, 05 Jul 2009 19:02:52 +0100

Posted by: big3lover

Description: Light bar for 2005-2009 Mustang convertible. Comes with all hardware. WILL NOT FIT ANY PREVIOUS YEARS.

Price: $300.00

PI Intake w/ aluminum crossover

wcflaherty@hotmail.com — Sat, 04 Jul 2009 23:42:18 +0100

Posted by: Zinc01

Description: PI Intake w/ aluminum crossover. In great shape, but of note that I RTVed the aluminum crossover to intake, as the gaskets were junked. Hasn't leaked one bit and I've sprayed a 200 shot through it several times since then. I only mention it, because I don't want someone to feel I didn't disclose something. $80 shipped

Price: $80.00

4.6 CP/Modmax Std. Bore 17cc pistons w/ notches and new rings

wcflaherty@hotmail.com — Sat, 04 Jul 2009 23:12:55 +0100

Posted by: Zinc01

Description: 4.6 CP/Modmax Std. Bore pistons 17cc w/ notches. These cost $800 just for the pistons, not including the machine work for the notches. Less than 2000 miles on these pistons. Also come with brand new set of Modmax piston rings (cost $150). These are in great shape! $450 shipped for pistons and rings in the US.

Price: $450.00

94 gt wheels 17x8 with tires

jb84@live.com — Sat, 04 Jul 2009 21:02:55 +0100

Posted by: jfb94

Description: 17x8 factory wheels. comes with tires 20% tread 1 tire is bad. wheels are in great shape. centers and lugs included.

Price: $250.00

2005-2009 Mustang GT500 Throttle Body

stlwagon@comcast.net — Sat, 04 Jul 2009 18:13:19 +0100

Posted by: stlwagon

Description: GT500 throttle body with adaptor plate to fit 4.6L engine. Complete with TPS and throttle actuator motor, adaptor, coupling, and clamps. New they are $350- $399. Selling for $200 plus shipping.

Price: $200.00

2006 Shelby GT-H Coupe #286

deepbluepics@yahoo.com — Sat, 04 Jul 2009 14:33:36 +0100

Posted by: jwlast

Description: - 2006 Shelby GT-H, #286, located in Albuquerque -One of 500 GT-H coupes produced for Hertz, most have long since been locked away by collectors and are very difficult to find today. - Although Shelby GT-500s are currently in production, the 2006 GT-H was the first �Next Generation� Shelby Mustang produced after 36 years, this is the 286th one produced of the 1000s (to include GTs) that have followed. - All original except windows tinted, replacement tires, replacement hood pins for the ones that were badly tarnished (I kept the originals). - 27,XXX miles - Exterior has minor scratches consistent with usage. Center stripes recently replaced, lower panel stripes are in excellent condition. Elected to continue center stripe onto chin spoiler (see photo) which can be easily removed - Interior in excellent condition - Sale includes: - All Hertz and Shelby documentation, - Carroll Shelby autographed 1:18th GT-H diecast with #286 included in autograph by Carroll, includes COA (very rare for Shelby to add car # to autograph) - Carroll Shelby autographed GT-H art poster with #286 included in Carroll�s autograph with COA - New, in the box hard-to find unused Hertz Sirius Satellite Radio control head (in my opinion only thing interior needs to be perfect!) - Hertz advertising - #286 underhood Vin Plate 2� x 4� Banner I will send any serious buyer more photos and info as requested. I will also send digital photos of any surface as requested. New Mustang project forces the sale of this rare collectible. Although this could be a driver car, I think the car will have greater value if stored or shown at local/regional/national shows which is what we�ve been doing with the car. Took second in 2006 category at 45th Mustang Birthday Bash in Albuquerque and car was filmed by Ford Motor company crew during Albuquerque leg of Mustangs Across America. You can send me an email at deepbluepics@yahoo.com requesting further info. The price is open to a reasonable offer from a serious buyer. $32,000 OBO.

Price: $32000.00

1994 Mustang Convertible, V6, Auto

mark.schaefferjr@yahoo.com — Sat, 04 Jul 2009 01:53:16 +0100

Posted by: Retro95GT

Description: 1994 Mustang Convertible. V6, Auto,power drivers seat, power mirrors, A/C works great. Red and black interior. White exterior with black stripes(painted, not decals). Runs and drives great. 15" rims with OK tires (6/32 tread left). New aftermarket headlights, new fuel pump and filter, new cam position sensor. Top is in good shape and works good. Few faded spots in paint, nothing to bad. couple stains on the carpet. Sony Cd player with MP3 port. Email with any question or to see more pics.

Price: $2500.00

'08 Ford Mustang 18" Bullit Wheels

jsjconstruction@gmail.com — Sat, 04 Jul 2009 00:57:18 +0100

Posted by: JsJohnson

Description: '08 Ford Mustang 18" Bullit Wheels; Good shape; Pony Center Caps; Tire pressure sensor; 2 tires are fair, other 2 don't have much life left (original tires). $700 or best offer Please leave a message: Josh 864-630-3105

Price: $700.00

2006 Mustang GT JLT II CAI Kit w/o tuner

jordan_spronk@hotmail.com — Sat, 04 Jul 2009 00:17:22 +0100

Posted by: jspronk

Description: This is a JLT 2 Cold Air intake kit for a 2005-2009 Mustang GT 4.6L. This kit can add about 30hp with a reasonable tune. A tune and tuner are not included. This kit only has about 500 miles on it and is in great condition (I upgraded to a S.C.). I'm looking for 150 but will go lower. Contact me either my work number (5072151479) or my home number (5078255905). Email me, txt me if ya got any questions and I will do paypal but I don't have an account. Thanks for checking out my product!

Price: $150.00

2006 Ford Mustang GT 18in Stock Wheel and Rims

jordan_spronk@hotmail.com — Fri, 03 Jul 2009 22:04:22 +0100

Posted by: jspronk

Description: I am selling my 2006 Ford Mustang GT 18in rims (all four of them) with 235/55 BFgoodrinch tires. They have about 10k miles on them and still have plenty of tread. They come with everything they need including the nuts and the lock nuts as well. They hardly have any abuse to them for I only put on about 2k on them. The guy who put on the rest of the miles was a 78 year old who hardly would go above 55. I am looking to get around $300 for all of these tires (not just one, all of them for 300) but will take best offer as well. I will do paypal but you'll have to email me about it ( I don't have a paypal account). I will not ship out of the US and I'm sorry but the buyer will have to pay for shipping. If you have any questions contact me via email, cell, or text. My work number is 5072151479, my home number is 5078255905. Thanks for checking out my wheels!

Price: $300.00

Like New - OEM Chrome Tipped GT Exhaust (2007)

gregoryrowell@tx.rr.com — Fri, 03 Jul 2009 16:29:32 +0100

Posted by: CAL

Description: 2007 California Specail GT Edition axle-back OEM mufflers for sale. Factory "bright rolled tips." Less than 1500 miles on them --as I changed them out for Ford Racing GTAs. Make me an offer. I am in the DFW metroplex (Plano). Come pick them up or I can meet you. These have been in the house and are in mint condition --got to go. Thank you.

Price: $50.00

16" polished aluminum wheels with good tires

DubbleRms@aol.com — Fri, 03 Jul 2009 15:48:55 +0100

Posted by: RuffRydahh88GT

Description: 16" polished aluminum Center Line 4 lug wheels. 4 great tires. VERY NICE wheels!!

Price: $450.00

89 MUSTANG

jmtbbs205@yahoo.com — Thu, 02 Jul 2009 23:17:51 +0100

Posted by: kayson35456

Description: 89 WITH ALL 86 BODY PARTS

Price: $1000.00

BBk LONGTUBE HEADERS

vicchavez13@yahoo.com — Thu, 02 Jul 2009 20:47:30 +0100

Posted by: svt1998

Description: These are bbk ceramic coated headers came off my old 98 gt 5 speed.They where on for about 16000 miles so they are still in good shape.Let me know if you have any questions 214-918-7748 Victor

Price: $175.00

4.6 NOSzle Direct Port Nitrous conversion kit

wcflaherty@hotmail.com — Thu, 02 Jul 2009 18:35:31 +0100

Posted by: Zinc01

Description: Everything you need to convert your current single nozzle or plate nitrous kit to direct port. Just hook up your current nitrous/fuel solenoids to the direct port manifold, install the noszles and you're ready to go. This is a great kit for anyone who wants to spray 150hp or more on their 4.6 motor. I sprayed a 200 shot several times without issue. You will never have to worry about a nitrous backfire from fuel puddling with this kit. This includes the nitrous/fuel manifold, direct port lines, 8 noszles and a lot of nitrous jets. I'm also including the necessary plenum spacer and fuel rail spacers. Note that the jet packs for this kit are $40 a piece for 8 jets and you need 16 (8 nitrous/8 fuel) for each HP level. The jets (8 each) included are 10, 16, 17, 18, 20, 24, 28 and 29. Good for 125-250 shot. $425 shipped within the US.

Price: $400.00